| Message ID | 20171220102304.8288-1-danielhb@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Dec 20, 2017 at 08:23:04AM -0200, Daniel Henrique Barboza wrote: > 'qmp_cpu' was implemented in commit 755f196898 ("qapi: Convert the cpu > command") as a functional no-op, a QMP call that does nothing and > return success. The idea, apparently, was to provide a counterpart > for the HMP 'hmp_cpu' command, introduced in the same commit. > > After 6 years of its creation, qmp_cpu remains a functional no-op > that does nothing, having no value for any caller/user. A proposal > was sent to implement qmp_cpu like hmp_cpu works, but it was denied > [1]. The reason is that QMP must be as stateless as possible and a > function that changes its state (the current CPU monitor in the case > of qmp_cpu) goes against it. Any QMP command that needs a specific > monitor CPU setup must provide it in its arguments, instead of relying > in the current QMP monitor state. > > After discussions that happened in [2] it was decided that a command > that does nothing since its birth, no one uses for anything and will > not be implemented, should be deprecated and erased. Given that we will > *not* provide any replacement for qmp_cpu and we believe that there > is no user relying on it, there is no point in adding a deprecation > delay for it. > > So, this patch nukes qmp_cpu from QEMU code, removing both its blank > implementation in qmp.c and its doc in qapi-schema.json. > > [1] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg02283.html > [2] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03696.html > > Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> > CC: Markus Armbruster <armbru@redhat.com> > CC: Eric Blake <eblake@redhat.com> > CC: Daniel P. Berrange <berrange@redhat.com> > --- > qapi-schema.json | 11 ----------- > qmp.c | 5 ----- > 2 files changed, 16 deletions(-) Reviewed-by: Daniel P. Berrange <berrange@redhat.com> > > diff --git a/qapi-schema.json b/qapi-schema.json > index 18457954a8..5c29bcd27f 100644 > --- a/qapi-schema.json > +++ b/qapi-schema.json > @@ -1046,17 +1046,6 @@ > { 'command': 'system_powerdown' } > > ## > -# @cpu: > -# > -# This command is a nop that is only provided for the purposes of compatibility. > -# > -# Since: 0.14.0 > -# > -# Notes: Do not use this command. > -## > -{ 'command': 'cpu', 'data': {'index': 'int'} } > - > -## > # @cpu-add: > # > # Adds CPU with specified ID > diff --git a/qmp.c b/qmp.c > index e8c303116a..52cfd2d81c 100644 > --- a/qmp.c > +++ b/qmp.c > @@ -113,11 +113,6 @@ void qmp_system_powerdown(Error **erp) > qemu_system_powerdown_request(); > } > > -void qmp_cpu(int64_t index, Error **errp) > -{ > - /* Just do nothing */ > -} > - > void qmp_cpu_add(int64_t id, Error **errp) > { > MachineClass *mc; > -- > 2.13.6 > Regards, Daniel
Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> writes: > 'qmp_cpu' was implemented in commit 755f196898 ("qapi: Convert the cpu > command") as a functional no-op, a QMP call that does nothing and > return success. The idea, apparently, was to provide a counterpart > for the HMP 'hmp_cpu' command, introduced in the same commit. > > After 6 years of its creation, qmp_cpu remains a functional no-op > that does nothing, having no value for any caller/user. A proposal > was sent to implement qmp_cpu like hmp_cpu works, but it was denied > [1]. The reason is that QMP must be as stateless as possible and a > function that changes its state (the current CPU monitor in the case > of qmp_cpu) goes against it. Any QMP command that needs a specific > monitor CPU setup must provide it in its arguments, instead of relying > in the current QMP monitor state. > > After discussions that happened in [2] it was decided that a command > that does nothing since its birth, no one uses for anything and will > not be implemented, should be deprecated and erased. Given that we will > *not* provide any replacement for qmp_cpu and we believe that there > is no user relying on it, there is no point in adding a deprecation > delay for it. > > So, this patch nukes qmp_cpu from QEMU code, removing both its blank > implementation in qmp.c and its doc in qapi-schema.json. > > [1] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg02283.html > [2] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03696.html > > Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> > CC: Markus Armbruster <armbru@redhat.com> > CC: Eric Blake <eblake@redhat.com> > CC: Daniel P. Berrange <berrange@redhat.com> Lovely commit message. I'll take this through my tree. Thanks!
On 12/20/2017 04:23 AM, Daniel Henrique Barboza wrote: > 'qmp_cpu' was implemented in commit 755f196898 ("qapi: Convert the cpu > command") as a functional no-op, a QMP call that does nothing and > return success. The idea, apparently, was to provide a counterpart > for the HMP 'hmp_cpu' command, introduced in the same commit. > > After 6 years of its creation, qmp_cpu remains a functional no-op > that does nothing, having no value for any caller/user. A proposal > was sent to implement qmp_cpu like hmp_cpu works, but it was denied > [1]. The reason is that QMP must be as stateless as possible and a > function that changes its state (the current CPU monitor in the case > of qmp_cpu) goes against it. Any QMP command that needs a specific > monitor CPU setup must provide it in its arguments, instead of relying > in the current QMP monitor state. s/in/on/ > > After discussions that happened in [2] it was decided that a command > that does nothing since its birth, no one uses for anything and will > not be implemented, should be deprecated and erased. Given that we will > *not* provide any replacement for qmp_cpu and we believe that there > is no user relying on it, there is no point in adding a deprecation > delay for it. > > So, this patch nukes qmp_cpu from QEMU code, removing both its blank > implementation in qmp.c and its doc in qapi-schema.json. > > [1] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg02283.html > [2] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03696.html > > Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> > CC: Markus Armbruster <armbru@redhat.com> > CC: Eric Blake <eblake@redhat.com> > CC: Daniel P. Berrange <berrange@redhat.com> > --- > qapi-schema.json | 11 ----------- > qmp.c | 5 ----- > 2 files changed, 16 deletions(-) Took a while to iterate to this solution, but I love the end result. Reviewed-by: Eric Blake <eblake@redhat.com>
diff --git a/qapi-schema.json b/qapi-schema.json index 18457954a8..5c29bcd27f 100644 --- a/qapi-schema.json +++ b/qapi-schema.json @@ -1046,17 +1046,6 @@ { 'command': 'system_powerdown' } ## -# @cpu: -# -# This command is a nop that is only provided for the purposes of compatibility. -# -# Since: 0.14.0 -# -# Notes: Do not use this command. -## -{ 'command': 'cpu', 'data': {'index': 'int'} } - -## # @cpu-add: # # Adds CPU with specified ID diff --git a/qmp.c b/qmp.c index e8c303116a..52cfd2d81c 100644 --- a/qmp.c +++ b/qmp.c @@ -113,11 +113,6 @@ void qmp_system_powerdown(Error **erp) qemu_system_powerdown_request(); } -void qmp_cpu(int64_t index, Error **errp) -{ - /* Just do nothing */ -} - void qmp_cpu_add(int64_t id, Error **errp) { MachineClass *mc;
'qmp_cpu' was implemented in commit 755f196898 ("qapi: Convert the cpu command") as a functional no-op, a QMP call that does nothing and return success. The idea, apparently, was to provide a counterpart for the HMP 'hmp_cpu' command, introduced in the same commit. After 6 years of its creation, qmp_cpu remains a functional no-op that does nothing, having no value for any caller/user. A proposal was sent to implement qmp_cpu like hmp_cpu works, but it was denied [1]. The reason is that QMP must be as stateless as possible and a function that changes its state (the current CPU monitor in the case of qmp_cpu) goes against it. Any QMP command that needs a specific monitor CPU setup must provide it in its arguments, instead of relying in the current QMP monitor state. After discussions that happened in [2] it was decided that a command that does nothing since its birth, no one uses for anything and will not be implemented, should be deprecated and erased. Given that we will *not* provide any replacement for qmp_cpu and we believe that there is no user relying on it, there is no point in adding a deprecation delay for it. So, this patch nukes qmp_cpu from QEMU code, removing both its blank implementation in qmp.c and its doc in qapi-schema.json. [1] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg02283.html [2] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03696.html Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Daniel P. Berrange <berrange@redhat.com> --- qapi-schema.json | 11 ----------- qmp.c | 5 ----- 2 files changed, 16 deletions(-)