Message ID | 1515449797-5629-3-git-send-email-jollys@xilinx.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Jolly, On Mon, Jan 8, 2018 at 11:16 PM, Jolly Shah <jolly.shah@xilinx.com> wrote: > This patch adds CCF compliant clock driver for ZynqMP. > Clock driver queries supported clock information from > firmware and regiters pll and output clocks with CCF. > > Signed-off-by: Jolly Shah <jollys@xilinx.com> > Signed-off-by: Rajan Vaja <rajanv@xilinx.com> > Signed-off-by: Tejas Patel <tejasp@xilinx.com> > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> > --- <snip> > .../devicetree/bindings/clock/zynq_mpsoc.txt | 163 +++++ > drivers/clk/Kconfig | 1 + > drivers/clk/Makefile | 1 + > drivers/clk/zynqmp/Kconfig | 8 + > drivers/clk/zynqmp/Makefile | 3 + > drivers/clk/zynqmp/clk-gate-zynqmp.c | 158 +++++ > drivers/clk/zynqmp/clk-mux-zynqmp.c | 190 ++++++ > drivers/clk/zynqmp/clkc.c | 707 +++++++++++++++++++++ > drivers/clk/zynqmp/divider.c | 239 +++++++ > drivers/clk/zynqmp/pll.c | 384 +++++++++++ > include/linux/clk/zynqmp.h | 46 ++ > 11 files changed, 1900 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/zynq_mpsoc.txt > create mode 100644 drivers/clk/zynqmp/Kconfig > create mode 100644 drivers/clk/zynqmp/Makefile > create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c > create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c > create mode 100644 drivers/clk/zynqmp/clkc.c > create mode 100644 drivers/clk/zynqmp/divider.c > create mode 100644 drivers/clk/zynqmp/pll.c > create mode 100644 include/linux/clk/zynqmp.h > > diff --git a/Documentation/devicetree/bindings/clock/zynq_mpsoc.txt b/Documentation/devicetree/bindings/clock/zynq_mpsoc.txt > new file mode 100644 > index 0000000..9061b57 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/zynq_mpsoc.txt > @@ -0,0 +1,163 @@ > +Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC > + > +The Zynq Ultrascale+ MPSoC has several different clk providers, > +each with there own bindings. > +The purpose of this document is to document their usage. > + > +See clock_bindings.txt for more information on the generic clock bindings. > + > +== Clock Controller == > +The clock controller is a logical abstraction of Zynq Ultrascale+ MPSoC clock > +tree. It reads required input clock frequencies from the devicetree and acts > +as clock provider for all clock consumers of PS clocks. > + > +Required properties: > + - #clock-cells : Must be 1 > + - compatible : "xlnx,zynqmp-clkc" > + - clocks : list of clock specifiers which are external input clocks to the > + given clock controller. Please refer the next section to find > + the input clocks for a given controller. > + - clock-names : list of names of clocks which are exteral input clocks to the > + given clock controller. Please refer to the clock bindings > + for more details > + > +Input clocks for zynqmp Ultrascale+ clock controller: > +The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock > +inputs. > +These required clock inputs are the > + - pss_ref_clk (PS reference clock) > + - video_clk (reference clock for video system ) > + - pss_alt_ref_clk (alternative PS reference clock) > + - aux_ref_clk > + - gt_crx_ref_clk (transceiver reference clock) > + > +The following strings are optional parameters to the 'clock-names' property in > +order to provide an optional (E)MIO clock source. > + - swdt0_ext_clk > + - swdt1_ext_clk > + - gem0_emio_clk > + - gem1_emio_clk > + - gem2_emio_clk > + - gem3_emio_clk > + - mio_clk_XX # with XX = 00..77 > + - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51 > + > + > +Output clocks for zynqmp Ultrascale+ clock controller: > +Output clocks are registered based on clock information received from firmware. > +Output clock indexes are mentioned below: > + > +Clock ID: Output clock name: > +------------------------------------- > +0 iopll > +1 rpll > +2 apll > +3 dpll > +4 vpll > +5 iopll_to_fpd > +6 rpll_to_fpd > +7 apll_to_lpd > +8 dpll_to_lpd > +9 vpll_to_lpd > +10 acpu > +11 acpu_half > +12 dbf_fpd > +13 dbf_lpd > +14 dbg_trace > +15 dbg_tstmp > +16 dp_video_ref > +17 dp_audio_ref > +18 dp_stc_ref > +19 gdma_ref > +20 dpdma_ref > +21 ddr_ref > +22 sata_ref > +23 pcie_ref > +24 gpu_ref > +25 gpu_pp0_ref > +26 gpu_pp1_ref > +27 topsw_main > +28 topsw_lsbus > +29 gtgref0_ref > +30 lpd_switch > +31 lpd_lsbus > +32 usb0_bus_ref > +33 usb1_bus_ref > +34 usb3_dual_ref > +35 usb0 > +36 usb1 > +37 cpu_r5 > +38 cpu_r5_core > +39 csu_spb > +40 csu_pll > +41 pcap > +42 iou_switch > +43 gem_tsu_ref > +44 gem_tsu > +45 gem0_ref > +46 gem1_ref > +47 gem2_ref > +48 gem3_ref > +49 gem0_tx > +50 gem1_tx > +51 gem2_tx > +52 gem3_tx > +53 qspi_ref > +54 sdio0_ref > +55 sdio1_ref > +56 uart0_ref > +57 uart1_ref > +58 spi0_ref > +59 spi1_ref > +60 nand_ref > +61 i2c0_ref > +62 i2c1_ref > +63 can0_ref > +64 can1_ref > +65 can0 > +66 can1 > +67 dll_ref > +68 adma_ref > +69 timestamp_ref > +70 ams_ref > +71 pl0_ref > +72 pl1_ref > +73 pl2_ref > +74 pl3_ref > +75 wdt > +76 iopll_int > +77 iopll_pre_src > +78 iopll_half > +79 iopll_int_mux > +80 iopll_post_src > +81 rpll_int > +82 rpll_pre_src > +83 rpll_half > +84 rpll_int_mux > +85 rpll_post_src > +86 apll_int > +87 apll_pre_src > +88 apll_half > +89 apll_int_mux > +90 apll_post_src > +91 dpll_int > +92 dpll_pre_src > +93 dpll_half > +94 dpll_int_mux > +95 dpll_post_src > +96 vpll_int > +97 vpll_pre_src > +98 vpll_half > +99 vpll_int_mux > +100 vpll_post_src > +101 can0_mio > +102 can1_mio > + > +Example: > + > +clkc: clkc@ff5e0020 { > + #clock-cells = <1>; > + compatible = "xlnx,zynqmp-clkc"; > + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>; > + clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk" > +}; > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig > index 1c4e1aa..526f4f5 100644 > --- a/drivers/clk/Kconfig > +++ b/drivers/clk/Kconfig > @@ -239,6 +239,7 @@ source "drivers/clk/samsung/Kconfig" > source "drivers/clk/sunxi-ng/Kconfig" > source "drivers/clk/tegra/Kconfig" > source "drivers/clk/ti/Kconfig" > +source "drivers/clk/zynqmp/Kconfig" > source "drivers/clk/uniphier/Kconfig" > > endmenu > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > index f7f761b..d7328b4 100644 > --- a/drivers/clk/Makefile > +++ b/drivers/clk/Makefile > @@ -98,3 +98,4 @@ obj-$(CONFIG_X86) += x86/ > endif > obj-$(CONFIG_ARCH_ZX) += zte/ > obj-$(CONFIG_ARCH_ZYNQ) += zynq/ > +obj-$(CONFIG_COMMON_CLK_ZYNQMP) += zynqmp/ > diff --git a/drivers/clk/zynqmp/Kconfig b/drivers/clk/zynqmp/Kconfig > new file mode 100644 > index 0000000..a6d54e9 > --- /dev/null > +++ b/drivers/clk/zynqmp/Kconfig > @@ -0,0 +1,8 @@ > +config COMMON_CLK_ZYNQMP > + bool "Support for Xilinx ZynqMP Ultrascale+ clock controllers" > + depends on OF > + depends on ARCH_ZYNQMP || COMPILE_TEST > + help > + Support for the Zynqmp Ultrascale clock controller. > + It has a dependency on the PMU firmware. > + Say Y if you want to support clock support > diff --git a/drivers/clk/zynqmp/Makefile b/drivers/clk/zynqmp/Makefile > new file mode 100644 > index 0000000..7d50f7a > --- /dev/null > +++ b/drivers/clk/zynqmp/Makefile > @@ -0,0 +1,3 @@ > +# Zynq Ultrascale+ MPSoC clock specific Makefile > + > +obj-$(CONFIG_ARCH_ZYNQMP) += pll.o clk-gate-zynqmp.o divider.o clk-mux-zynqmp.o clkc.o > diff --git a/drivers/clk/zynqmp/clk-gate-zynqmp.c b/drivers/clk/zynqmp/clk-gate-zynqmp.c > new file mode 100644 > index 0000000..45eeed8 > --- /dev/null > +++ b/drivers/clk/zynqmp/clk-gate-zynqmp.c > @@ -0,0 +1,158 @@ > +/* > + * Zynq UltraScale+ MPSoC clock controller > + * > + * Copyright (C) 2016-2017 Xilinx > + * > + * SPDX-License-Identifier: GPL-2.0+ This tag should be on the fist line this way: // SPDX-License-Identifier: GPL-2.0+ > + > +#include <linux/clk-provider.h> > +#include <linux/clk/zynqmp.h> > +#include <linux/module.h> > +#include <linux/slab.h> > +#include <linux/io.h> > +#include <linux/err.h> > +#include <linux/string.h> > + > +/** > + * struct clk_gate - gating clock > + * > + * @hw: handle between common and hardware-specific interfaces > + * @flags: hardware-specific flags > + * @clk_id: Id of clock > + */ > +struct zynqmp_clk_gate { > + struct clk_hw hw; > + u8 flags; > + u32 clk_id; > +}; > + > +#define to_zynqmp_clk_gate(_hw) container_of(_hw, struct zynqmp_clk_gate, hw) > + > +/** > + * zynqmp_clk_gate_enable - Enable clock > + * @hw: handle between common and hardware-specific interfaces > + * > + * Return: 0 always > + */ > +static int zynqmp_clk_gate_enable(struct clk_hw *hw) > +{ > + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); > + const char *clk_name = clk_hw_get_name(hw); > + u32 clk_id = gate->clk_id; > + int ret = 0; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_enable) > + return -ENXIO; > + > + ret = eemi_ops->clock_enable(clk_id); > + > + if (ret) > + pr_warn_once("%s() clock enabled failed for %s, ret = %d\n", > + __func__, clk_name, ret); > + > + return 0; > +} > + > +/* > + * zynqmp_clk_gate_disable - Disable clock > + * @hw: handle between common and hardware-specific interfaces > + */ > +static void zynqmp_clk_gate_disable(struct clk_hw *hw) > +{ > + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); > + const char *clk_name = clk_hw_get_name(hw); > + u32 clk_id = gate->clk_id; > + int ret = 0; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_disable) > + return; > + > + ret = eemi_ops->clock_disable(clk_id); > + > + if (ret) > + pr_warn_once("%s() clock disable failed for %s, ret = %d\n", > + __func__, clk_name, ret); > +} > + > +/** > + * zynqmp_clk_gate_is_enable - Check clock state > + * @hw: handle between common and hardware-specific interfaces > + * > + * Return: 1 if enabled > + * 0 if disabled > + */ > +static int zynqmp_clk_gate_is_enabled(struct clk_hw *hw) > +{ > + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); > + const char *clk_name = clk_hw_get_name(hw); > + u32 clk_id = gate->clk_id; > + int state, ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_getstate) > + return 0; > + > + ret = eemi_ops->clock_getstate(clk_id, &state); > + if (ret) > + pr_warn_once("%s() clock get state failed for %s, ret = %d\n", > + __func__, clk_name, ret); > + > + return state ? 1 : 0; > +} > + > +const struct clk_ops zynqmp_clk_gate_ops = { > + .enable = zynqmp_clk_gate_enable, > + .disable = zynqmp_clk_gate_disable, > + .is_enabled = zynqmp_clk_gate_is_enabled, > +}; > +EXPORT_SYMBOL_GPL(zynqmp_clk_gate_ops); > + > +/** > + * zynqmp_clk_register_gate - register a gate clock with the clock framework > + * @dev: device that is registering this clock > + * @name: name of this clock > + * @clk_id: Id of this clock > + * @parents: name of this clock's parents > + * @num_parents: number of parents > + * @flags: framework-specific flags for this clock > + * @clk_gate_flags: gate-specific flags for this clock > + * > + * Return: clock handle of the registered clock gate > + */ > +struct clk *zynqmp_clk_register_gate(struct device *dev, const char *name, > + u32 clk_id, const char * const *parents, > + u8 num_parents, unsigned long flags, > + u8 clk_gate_flags) > +{ > + struct zynqmp_clk_gate *gate; > + struct clk *clk; > + struct clk_init_data init; > + > + /* allocate the gate */ > + gate = kzalloc(sizeof(*gate), GFP_KERNEL); > + if (!gate) > + return ERR_PTR(-ENOMEM); > + > + init.name = name; > + init.ops = &zynqmp_clk_gate_ops; > + init.flags = flags; > + init.parent_names = parents; > + init.num_parents = num_parents; > + > + /* struct clk_gate assignments */ > + gate->flags = clk_gate_flags; > + gate->hw.init = &init; > + gate->clk_id = clk_id; > + > + clk = clk_register(dev, &gate->hw); > + > + if (IS_ERR(clk)) > + kfree(gate); > + > + return clk; > +} > diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c > new file mode 100644 > index 0000000..ee36244 > --- /dev/null > +++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c > @@ -0,0 +1,190 @@ > +/* > + * Zynq UltraScale+ MPSoC mux > + * > + * Copyright (C) 2016-2017 Xilinx > + * > + * SPDX-License-Identifier: GPL-2.0+ This tag should be on the fist line this way: // SPDX-License-Identifier: GPL-2.0+ > + */ > + > +#include <linux/clk-provider.h> > +#include <linux/clk/zynqmp.h> > +#include <linux/module.h> > +#include <linux/slab.h> > +#include <linux/io.h> > +#include <linux/err.h> > + > +/* > + * DOC: basic adjustable multiplexer clock that cannot gate > + * > + * Traits of this clock: > + * prepare - clk_prepare only ensures that parents are prepared > + * enable - clk_enable only ensures that parents are enabled > + * rate - rate is only affected by parent switching. No clk_set_rate support > + * parent - parent is adjustable through clk_set_parent > + */ > + > +/** > + * struct zynqmp_clk_mux - multiplexer clock > + * > + * @hw: handle between common and hardware-specific interfaces > + * @flags: hardware-specific flags > + * @clk_id: Id of clock > + */ > +struct zynqmp_clk_mux { > + struct clk_hw hw; > + u8 flags; > + u32 clk_id; > +}; > + > +#define to_zynqmp_clk_mux(_hw) container_of(_hw, struct zynqmp_clk_mux, hw) > + > +/** > + * zynqmp_clk_mux_get_parent - Get parent of clock > + * @hw: handle between common and hardware-specific interfaces > + * > + * Return: Parent index > + */ > +static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw) > +{ > + struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw); > + const char *clk_name = clk_hw_get_name(hw); > + u32 clk_id = mux->clk_id; > + u32 val; > + int ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_getparent) > + return -ENXIO; > + > + ret = eemi_ops->clock_getparent(clk_id, &val); > + > + if (ret) > + pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n", > + __func__, clk_name, ret); > + > + if (val && (mux->flags & CLK_MUX_INDEX_BIT)) > + val = ffs(val) - 1; > + > + if (val && (mux->flags & CLK_MUX_INDEX_ONE)) > + val--; > + > + return val; > +} > + > +/** > + * zynqmp_clk_mux_set_parent - Set parent of clock > + * @hw: handle between common and hardware-specific interfaces > + * @index: Parent index > + * > + * Return: 0 always > + */ > +static int zynqmp_clk_mux_set_parent(struct clk_hw *hw, u8 index) > +{ > + struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw); > + const char *clk_name = clk_hw_get_name(hw); > + u32 clk_id = mux->clk_id; > + int ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_setparent) > + return -ENXIO; > + > + if (mux->flags & CLK_MUX_INDEX_BIT) > + index = 1 << index; > + > + if (mux->flags & CLK_MUX_INDEX_ONE) > + index++; > + > + ret = eemi_ops->clock_setparent(clk_id, index); > + > + if (ret) > + pr_warn_once("%s() set parent failed for clock: %s, ret = %d\n", > + __func__, clk_name, ret); > + > + return 0; > +} > + > +const struct clk_ops zynqmp_clk_mux_ops = { > + .get_parent = zynqmp_clk_mux_get_parent, > + .set_parent = zynqmp_clk_mux_set_parent, > + .determine_rate = __clk_mux_determine_rate, > +}; > +EXPORT_SYMBOL_GPL(zynqmp_clk_mux_ops); > + > +const struct clk_ops zynqmp_clk_mux_ro_ops = { > + .get_parent = zynqmp_clk_mux_get_parent, > +}; > +EXPORT_SYMBOL_GPL(zynqmp_clk_mux_ro_ops); > + > +/** > + * zynqmp_clk_register_mux_table - register a mux table with the clock framework > + * @dev: device that is registering this clock > + * @name: name of this clock > + * @clk_id: Id of this clock > + * @parent_names: name of this clock's parents > + * @num_parents: number of parents > + * @flags: framework-specific flags for this clock > + * @clk_mux_flags: mux-specific flags for this clock > + * > + * Return: clock handle of the registered clock mux > + */ > +struct clk *zynqmp_clk_register_mux_table(struct device *dev, const char *name, > + u32 clk_id, > + const char * const *parent_names, > + u8 num_parents, > + unsigned long flags, > + u8 clk_mux_flags) > +{ > + struct zynqmp_clk_mux *mux; > + struct clk *clk; > + struct clk_init_data init; > + > + /* allocate the mux */ > + mux = kzalloc(sizeof(*mux), GFP_KERNEL); > + if (!mux) > + return ERR_PTR(-ENOMEM); > + > + init.name = name; > + if (clk_mux_flags & CLK_MUX_READ_ONLY) > + init.ops = &zynqmp_clk_mux_ro_ops; > + else > + init.ops = &zynqmp_clk_mux_ops; > + init.flags = flags; > + init.parent_names = parent_names; > + init.num_parents = num_parents; > + > + /* struct clk_mux assignments */ > + mux->flags = clk_mux_flags; > + mux->hw.init = &init; > + mux->clk_id = clk_id; > + > + clk = clk_register(dev, &mux->hw); > + > + if (IS_ERR(clk)) > + kfree(mux); > + > + return clk; > +} > +EXPORT_SYMBOL_GPL(zynqmp_clk_register_mux_table); > + > +/** > + * zynqmp_clk_register_mux - register a mux clock with the clock framework > + * @dev: device that is registering this clock > + * @name: name of this clock > + * @clk_id: Id of this clock > + * @parent_names: name of this clock's parents > + * @num_parents: number of parents > + * @flags: framework-specific flags for this clock > + * @clk_mux_flags: mux-specific flags for this clock > + * > + * Return: clock handle of the registered clock mux > + */ > +struct clk *zynqmp_clk_register_mux(struct device *dev, const char *name, > + u32 clk_id, const char **parent_names, > + u8 num_parents, unsigned long flags, > + u8 clk_mux_flags) > +{ > + return zynqmp_clk_register_mux_table(dev, name, clk_id, parent_names, > + num_parents, flags, clk_mux_flags); > +} > +EXPORT_SYMBOL_GPL(zynqmp_clk_register_mux); > diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c > new file mode 100644 > index 0000000..36bf1c1 > --- /dev/null > +++ b/drivers/clk/zynqmp/clkc.c > @@ -0,0 +1,707 @@ > +/* > + * Zynq UltraScale+ MPSoC clock controller > + * > + * Copyright (C) 2016-2017 Xilinx > + * > + * SPDX-License-Identifier: GPL-2.0+ This tag should be on the fist line this way: // SPDX-License-Identifier: GPL-2.0+ > + * > + * Based on drivers/clk/zynq/clkc.c > + */ > + > +#include <linux/clk.h> > +#include <linux/clk-provider.h> > +#include <linux/clk/zynqmp.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/slab.h> > +#include <linux/string.h> > + > +#define MAX_PARENT 100 > +#define MAX_NODES 6 > +#define MAX_NAME_LEN 50 > +#define MAX_CLOCK 300 > + > +#define CLK_INIT_ENABLE_SHIFT 1 > +#define CLK_TYPE_SHIFT 2 > + > +#define PM_API_PAYLOAD_LEN 3 > + > +#define NA_PARENT -1 > +#define DUMMY_PARENT -2 > + > +#define CLK_TYPE_FIELD_LEN 4 > +#define CLK_TOPOLOGY_NODE_OFFSET 16 > +#define NODES_PER_RESP 3 > + > +#define CLK_TYPE_FIELD_MASK 0xF > +#define CLK_FLAG_FIELD_SHIFT 8 > +#define CLK_FLAG_FIELD_MASK 0x3FFF > +#define CLK_TYPE_FLAG_FIELD_SHIFT 24 > +#define CLK_TYPE_FLAG_FIELD_MASK 0xFF > + > +#define CLK_PARENTS_ID_LEN 16 > +#define CLK_PARENTS_ID_MASK 0xFFFF > + > +/* Flags for parents */ > +#define PARENT_CLK_SELF 0 > +#define PARENT_CLK_NODE1 1 > +#define PARENT_CLK_NODE2 2 > +#define PARENT_CLK_NODE3 3 > +#define PARENT_CLK_NODE4 4 > +#define PARENT_CLK_EXTERNAL 5 > + > +#define END_OF_CLK_NAME "END_OF_CLK" > +#define RESERVED_CLK_NAME "" > + > +#define CLK_VALID_MASK 0x1 > +#define CLK_INIT_ENABLE_MASK (0x1 << CLK_INIT_ENABLE_SHIFT) > + > +enum clk_type { > + CLK_TYPE_OUTPUT, > + CLK_TYPE_EXTERNAL, > +}; > + > +/** > + * struct clock_parent - Structure for parent of clock > + * @id: Parent clock ID > + * @flag: Parent flags > + */ > +struct clock_parent { > + char name[MAX_NAME_LEN]; > + int id; > + u32 flag; > +}; > + > +/** > + * struct clock_topology - Structure for topology of clock > + * @type: Type of topology > + * @flag: Topology flags > + * @type_flag: Topology type specific flag > + */ > +struct clock_topology { > + u32 type; > + u32 flag; > + u32 type_flag; > +}; > + > +/** > + * struct zynqmp_clock - Structure for clock > + * @clk_name: Clock name > + * @valid: Validity flag of clock > + * @init_enable: init_enable flag of clock > + * @topology: structure of topology of clock > + * @num_node: Number of nodes present in topology > + * @parent: structure of parent of clock > + * @num_parents: Number of parents of clock > + * @type: Type of clock > + */ > +struct zynqmp_clock { > + char clk_name[MAX_NAME_LEN]; > + u32 valid; > + u32 init_enable; > + enum clk_type type; > + struct clock_topology node[MAX_NODES]; > + u32 num_nodes; > + struct clock_parent parent[MAX_PARENT]; > + u32 num_parents; > +}; > + > +static const char clk_type_postfix[][10] = { > + [TYPE_INVALID] = "", > + [TYPE_MUX] = "_mux", > + [TYPE_GATE] = "", > + [TYPE_DIV1] = "_div1", > + [TYPE_DIV2] = "_div2", > + [TYPE_FIXEDFACTOR] = "_ff", > + [TYPE_PLL] = "" > +}; > + > +static struct zynqmp_clock clock[MAX_CLOCK]; > +static struct clk_onecell_data zynqmp_clk_data; > +static struct clk *zynqmp_clks[MAX_CLOCK]; > +static unsigned int clock_max_idx; > +static const struct zynqmp_eemi_ops *eemi_ops; > + > +/** > + * is_valid_clock - Check whether clock is valid or not > + * @clk_id: Clock Index > + * @valid: 1: if clock is valid > + * 0: invalid clock > + * > + * Return: 0 Success > + * Error code: Failure > + */ > +static int is_valid_clock(u32 clk_id, u32 *valid) > +{ > + if (clk_id < 0 || clk_id > clock_max_idx) > + return -ENODEV; > + > + *valid = clock[clk_id].valid; > + > + return *valid ? 0 : -EINVAL; > +} > + > +/** > + * zynqmp_get_clock_name - Get name of clock from clock index > + * @clk_id: Clock index > + * @clk_name: Name of clock > + * > + * Return: 0: Success > + * Error code: failure > + */ > +static int zynqmp_get_clock_name(u32 clk_id, char *clk_name) > +{ > + int ret; > + u32 valid; > + > + ret = is_valid_clock(clk_id, &valid); > + if (!ret && valid) { > + strncpy(clk_name, clock[clk_id].clk_name, MAX_NAME_LEN); > + return 0; > + } else { > + return ret; > + } > +} > + > +/** > + * get_clock_type - Get type of clock > + * @clk_id: Clock Index > + * @type: Clock type: CLK_TYPE_OUTPUT or CLK_TYPE_EXTERNAL > + * > + * Return: 0: Success > + * Error code: failure > + */ > +static int get_clock_type(u32 clk_id, u32 *type) > +{ > + int ret; > + u32 valid; > + > + ret = is_valid_clock(clk_id, &valid); > + if (!ret && valid) { > + *type = clock[clk_id].type; > + return 0; > + } else { > + return ret; > + } > +} > + > +/** > + * zynqmp_pm_clock_get_name - Get the name of clock for given id > + * @clock_id: ID of the clock to be queried > + * @name: Name of given clock > + * > + * This function is used to get name of clock specified by given > + * clock ID. > + * > + * Return: Returns status, in case of error name would be 0. > + */ > +static int zynqmp_pm_clock_get_name(u32 clock_id, char *name) > +{ > + struct zynqmp_pm_query_data qdata = {0}; > + u32 ret_payload[PAYLOAD_ARG_CNT]; > + > + qdata.qid = PM_QID_CLOCK_GET_NAME; > + qdata.arg1 = clock_id; > + > + eemi_ops->query_data(qdata, ret_payload); > + memcpy(name, ret_payload, CLK_GET_NAME_RESP_LEN); > + > + return 0; > +} > + > +/** > + * zynqmp_pm_clock_get_topology - Get the topology of clock for given id > + * @clock_id: ID of the clock to be queried > + * @index: Node index of clock topology > + * @topology: Buffer to store nodes in topology and flags > + * > + * This function is used to get topology information for the clock > + * specified by given clock ID. > + * > + * This API will return 3 node of topology with a single response. To get > + * other nodes, master should call same API in loop with new > + * index till error is returned. E.g First call should have > + * index 0 which will return nodes 0,1 and 2. Next call, index > + * should be 3 which will return nodes 3,4 and 5 and so on. > + * > + * Return: Returns status, either success or error+reason. > + */ > +static int zynqmp_pm_clock_get_topology(u32 clock_id, u32 index, u32 *topology) > +{ > + struct zynqmp_pm_query_data qdata = {0}; > + u32 ret_payload[PAYLOAD_ARG_CNT]; > + > + qdata.qid = PM_QID_CLOCK_GET_TOPOLOGY; > + qdata.arg1 = clock_id; > + qdata.arg2 = index; > + > + eemi_ops->query_data(qdata, ret_payload); > + memcpy(topology, &ret_payload[1], CLK_GET_TOPOLOGY_RESP_WORDS * 4); > + > + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]); > +} > + > +/** > + * zynqmp_pm_clock_get_fixedfactor_params - Get the clock's fixed factor > + * parameters for fixed clock > + * @clock_id: Clock ID > + * @mul: Multiplication value > + * @div: Divisor value > + * > + * This function is used to get fixed factor parameers for the fixed > + * clock. This API is application only for the fixed clock. > + * > + * Return: Returns status, either success or error+reason. > + */ > +static int zynqmp_pm_clock_get_fixedfactor_params(u32 clock_id, > + u32 *mul, > + u32 *div) > +{ > + struct zynqmp_pm_query_data qdata = {0}; > + u32 ret_payload[PAYLOAD_ARG_CNT]; > + > + qdata.qid = PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS; > + qdata.arg1 = clock_id; > + > + eemi_ops->query_data(qdata, ret_payload); > + *mul = ret_payload[1]; > + *div = ret_payload[2]; > + > + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]); > +} > + > +/** > + * zynqmp_pm_clock_get_parents - Get the first 3 parents of clock for given id > + * @clock_id: Clock ID > + * @index: Parent index > + * @parents: 3 parents of the given clock > + * > + * This function is used to get 3 parents for the clock specified by > + * given clock ID. > + * > + * This API will return 3 parents with a single response. To get > + * other parents, master should call same API in loop with new > + * parent index till error is returned. E.g First call should have > + * index 0 which will return parents 0,1 and 2. Next call, index > + * should be 3 which will return parent 3,4 and 5 and so on. > + * > + * Return: Returns status, either success or error+reason. > + */ > +static int zynqmp_pm_clock_get_parents(u32 clock_id, u32 index, u32 *parents) > +{ > + struct zynqmp_pm_query_data qdata = {0}; > + u32 ret_payload[PAYLOAD_ARG_CNT]; > + > + qdata.qid = PM_QID_CLOCK_GET_PARENTS; > + qdata.arg1 = clock_id; > + qdata.arg2 = index; > + > + eemi_ops->query_data(qdata, ret_payload); > + memcpy(parents, &ret_payload[1], CLK_GET_PARENTS_RESP_WORDS * 4); > + > + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]); > +} > + > +/** > + * zynqmp_pm_clock_get_attributes - Get the attributes of clock for given id > + * @clock_id: Clock ID > + * @attributes: Clock attributes > + * > + * This function is used to get clock's attributes(e.g. valid, clock type, etc). > + * > + * Return: Returns status, either success or error+reason. > + */ > +static int zynqmp_pm_clock_get_attributes(u32 clock_id, u32 *attr) > +{ > + struct zynqmp_pm_query_data qdata = {0}; > + u32 ret_payload[PAYLOAD_ARG_CNT]; > + > + qdata.qid = PM_QID_CLOCK_GET_ATTRIBUTES; > + qdata.arg1 = clock_id; > + > + eemi_ops->query_data(qdata, ret_payload); > + memcpy(attr, &ret_payload[1], CLK_GET_ATTR_RESP_WORDS * 4); > + > + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]); > +} > + > +/** > + * clock_get_topology: Get topology of clock from firmware using PM_API > + * @clk_id: Clock Index > + * @clk_topology: Structure of clock topology > + * @num_nodes: number of nodes > + * > + * Return: 0: Success > + * Error Code: Failure > + */ > +static int clock_get_topology(u32 clk_id, struct clock_topology *clk_topology, > + u32 *num_nodes) > +{ > + int j, k = 0, ret; > + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0}; > + > + *num_nodes = 0; > + for (j = 0; j <= MAX_NODES; j += 3) { > + ret = zynqmp_pm_clock_get_topology(clk_id, j, pm_resp); > + if (ret) > + return ret; > + for (k = 0; k < PM_API_PAYLOAD_LEN; k++) { > + if (!(pm_resp[k] & CLK_TYPE_FIELD_MASK)) > + goto done; > + clk_topology[*num_nodes].type = pm_resp[k] & > + CLK_TYPE_FIELD_MASK; > + clk_topology[*num_nodes].flag = > + (pm_resp[k] >> CLK_FLAG_FIELD_SHIFT) & > + CLK_FLAG_FIELD_MASK; > + clk_topology[*num_nodes].type_flag = > + (pm_resp[k] >> CLK_TYPE_FLAG_FIELD_SHIFT) & > + CLK_TYPE_FLAG_FIELD_MASK; > + (*num_nodes)++; > + } > + } > +done: > + return 0; > +} > + > +/** > + * clock_get_parents: Get parents info from firmware using PM_API > + * @clk_id: Clock Index > + * @parent: Structure of parent information > + * @num_parents: Total number of parents > + * > + * Return: 0: Success > + * Error code: Failure > + */ > +static int clock_get_parents(u32 clk_id, struct clock_parent *parents, > + u32 *num_parents) > +{ > + int j = 0, k, ret, total_parents = 0; > + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0}; > + > + do { > + /* Get parents from firmware */ > + ret = zynqmp_pm_clock_get_parents(clk_id, j, pm_resp); > + if (ret) > + return ret; > + > + for (k = 0; k < PM_API_PAYLOAD_LEN; k++) { > + if (pm_resp[k] == (u32)NA_PARENT) { > + *num_parents = total_parents; > + return 0; > + } > + > + parents[k + j].id = pm_resp[k] & CLK_PARENTS_ID_MASK; > + if (parents[k + j].id == DUMMY_PARENT) { > + strncpy(parents[k + j].name, > + "dummy_name", MAX_NAME_LEN); > + parents[k + j].flag = 0; > + } else { > + parents[k + j].flag = pm_resp[k] >> > + CLK_PARENTS_ID_LEN; > + if (zynqmp_get_clock_name(parents[k + j].id, > + parents[k + j].name)) > + continue; > + } > + total_parents++; > + } > + j += PM_API_PAYLOAD_LEN; > + } while (total_parents <= MAX_PARENT); > + return 0; > +} > + > +/** > + * get_parent_list: Create list of parents name > + * @np: Device node > + * @clk_id: Clock Index > + * @parent_list List of parent's name > + * @num_parents: Total number of parents > + * > + # Return: 0: Success > + * Error code: Failure > + */ > +static int get_parent_list(struct device_node *np, u32 clk_id, > + const char **parent_list, u32 *num_parents) > +{ > + int i = 0, ret; > + u32 total_parents = clock[clk_id].num_parents; > + struct clock_topology *clk_nodes; > + struct clock_parent *parents; > + > + clk_nodes = clock[clk_id].node; > + parents = clock[clk_id].parent; > + > + for (i = 0; i < total_parents; i++) { > + if (!parents[i].flag) { > + parent_list[i] = parents[i].name; > + } else if (parents[i].flag == PARENT_CLK_EXTERNAL) { > + ret = of_property_match_string(np, "clock-names", > + parents[i].name); > + if (ret < 0) > + strncpy(parents[i].name, > + "dummy_name", MAX_NAME_LEN); > + parent_list[i] = parents[i].name; > + } else { > + strcat(parents[i].name, > + clk_type_postfix[clk_nodes[parents[i].flag - 1]. > + type]); > + parent_list[i] = parents[i].name; > + } > + } > + > + *num_parents = total_parents; > + return 0; > +} > + > +/** > + * zynqmp_register_clk_topology: Register clock topology > + * @clk_id: Clock Index > + * @clk_name: Clock Name > + * @num_parents: Total number of parents > + * @parent_names: List of parents name > + * > + * Return: 0: Success > + * Error code: Failure > + */ > +static struct clk *zynqmp_register_clk_topology(int clk_id, char *clk_name, > + int num_parents, > + const char **parent_names) > +{ > + int j, ret; > + u32 num_nodes, mult, div; > + char *clk_out = NULL; > + struct clock_topology *nodes; > + struct clk *clk = NULL; > + > + nodes = clock[clk_id].node; > + num_nodes = clock[clk_id].num_nodes; > + > + for (j = 0; j < num_nodes; j++) { > + if (j != (num_nodes - 1)) { > + clk_out = kasprintf(GFP_KERNEL, "%s%s", clk_name, > + clk_type_postfix[nodes[j].type]); > + } else { > + clk_out = kasprintf(GFP_KERNEL, "%s", clk_name); > + } > + > + switch (nodes[j].type) { > + case TYPE_MUX: > + clk = zynqmp_clk_register_mux(NULL, clk_out, > + clk_id, parent_names, > + num_parents, > + nodes[j].flag, > + nodes[j].type_flag); > + break; > + case TYPE_PLL: > + clk = clk_register_zynqmp_pll(clk_out, clk_id, > + parent_names, 1, > + nodes[j].flag); > + break; > + case TYPE_FIXEDFACTOR: > + ret = zynqmp_pm_clock_get_fixedfactor_params(clk_id, > + &mult, > + &div); > + clk = clk_register_fixed_factor(NULL, clk_out, > + parent_names[0], > + nodes[j].flag, mult, > + div); > + break; > + case TYPE_DIV1: > + case TYPE_DIV2: > + clk = zynqmp_clk_register_divider(NULL, clk_out, clk_id, > + nodes[j].type, > + parent_names, 1, > + nodes[j].flag, > + nodes[j].type_flag); > + break; > + case TYPE_GATE: > + clk = zynqmp_clk_register_gate(NULL, clk_out, clk_id, > + parent_names, 1, > + nodes[j].flag, > + nodes[j].type_flag); > + break; > + default: > + pr_err("%s() Unknown topology for %s\n", > + __func__, clk_out); > + break; > + } > + if (IS_ERR(clk)) > + pr_warn_once("%s() %s register fail with %ld\n", > + __func__, clk_name, PTR_ERR(clk)); > + > + parent_names[0] = clk_out; > + } > + kfree(clk_out); > + return clk; > +} > + > +/** > + * zynqmp_register_clocks: Register clocks > + * @np: Device node > + * > + * Return: 0: Success > + * Error code: failure > + */ > +static int zynqmp_register_clocks(struct device_node *np) > +{ > + int ret; > + u32 i, total_parents = 0, type = 0; > + const char *parent_names[MAX_PARENT]; > + > + for (i = 0; i < clock_max_idx; i++) { > + char clk_name[MAX_NAME_LEN]; > + > + /* get clock name, continue to next clock if name not found */ > + if (zynqmp_get_clock_name(i, clk_name)) > + continue; > + > + /* Check if clock is valid and output clock. > + * Do not regiter invalid or external clock. > + */ > + ret = get_clock_type(i, &type); > + if (ret || type != CLK_TYPE_OUTPUT) > + continue; > + > + /* Get parents of clock*/ > + if (get_parent_list(np, i, parent_names, &total_parents)) { > + WARN_ONCE(1, "No parents found for %s\n", > + clock[i].clk_name); > + continue; > + } > + > + zynqmp_clks[i] = zynqmp_register_clk_topology(i, clk_name, > + total_parents, > + parent_names); > + > + /* Enable clock if init_enable flag is 1 */ > + if (clock[i].init_enable) > + clk_prepare_enable(zynqmp_clks[i]); > + } > + > + for (i = 0; i < clock_max_idx; i++) { > + if (IS_ERR(zynqmp_clks[i])) { > + pr_err("Zynq Ultrascale+ MPSoC clk %s: register failed with %ld\n", > + clock[i].clk_name, PTR_ERR(zynqmp_clks[i])); > + WARN_ON(1); > + } > + } > + return 0; > +} > + > +/** > + * zynqmp_get_clock_info - Get clock information from firmware using PM_API > + */ > +static void zynqmp_get_clock_info(void) > +{ > + int i, ret; > + u32 attr, type = 0; > + > + memset(clock, 0, sizeof(clock)); > + for (i = 0; i < MAX_CLOCK; i++) { > + zynqmp_pm_clock_get_name(i, clock[i].clk_name); > + if (!strncmp(clock[i].clk_name, END_OF_CLK_NAME, > + MAX_NAME_LEN)) { > + clock_max_idx = i; > + break; > + } else if (!strncmp(clock[i].clk_name, RESERVED_CLK_NAME, > + MAX_NAME_LEN)) { > + continue; > + } > + > + ret = zynqmp_pm_clock_get_attributes(i, &attr); > + if (ret) > + continue; > + > + clock[i].valid = attr & CLK_VALID_MASK; > + clock[i].init_enable = !!(attr & CLK_INIT_ENABLE_MASK); > + clock[i].type = attr >> CLK_TYPE_SHIFT ? CLK_TYPE_EXTERNAL : > + CLK_TYPE_OUTPUT; > + } > + > + /* Get topology of all clock */ > + for (i = 0; i < clock_max_idx; i++) { > + ret = get_clock_type(i, &type); > + if (ret || type != CLK_TYPE_OUTPUT) > + continue; > + > + ret = clock_get_topology(i, clock[i].node, &clock[i].num_nodes); > + if (ret) > + continue; > + > + ret = clock_get_parents(i, clock[i].parent, > + &clock[i].num_parents); > + if (ret) > + continue; > + } > +} > + > +/** > + * zynqmp_clk_setup - Setup the clock framework and register clocks > + * @np: Device node > + */ > +static void __init zynqmp_clk_setup(struct device_node *np) > +{ > + int idx; > + > + idx = of_property_match_string(np, "clock-names", "pss_ref_clk"); > + if (idx < 0) { > + pr_err("pss_ref_clk not provided\n"); > + return; > + } > + idx = of_property_match_string(np, "clock-names", "video_clk"); > + if (idx < 0) { > + pr_err("video_clk not provided\n"); > + return; > + } > + idx = of_property_match_string(np, "clock-names", "pss_alt_ref_clk"); > + if (idx < 0) { > + pr_err("pss_alt_ref_clk not provided\n"); > + return; > + } > + idx = of_property_match_string(np, "clock-names", "aux_ref_clk"); > + if (idx < 0) { > + pr_err("aux_ref_clk not provided\n"); > + return; > + } > + idx = of_property_match_string(np, "clock-names", "gt_crx_ref_clk"); > + if (idx < 0) { > + pr_err("aux_ref_clk not provided\n"); > + return; > + } > + > + zynqmp_get_clock_info(); > + zynqmp_register_clocks(np); > + > + zynqmp_clk_data.clks = zynqmp_clks; > + zynqmp_clk_data.clk_num = clock_max_idx; > + of_clk_add_provider(np, of_clk_src_onecell_get, &zynqmp_clk_data); > +} > + > +/** > + * zynqmp_clock_init - Initialize zynqmp clocks > + * > + * Return: 0 always > + */ > +static int __init zynqmp_clock_init(void) > +{ > + struct device_node *np; > + > + np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp-clkc"); > + if (!np) { > + pr_err("%s: clkc node not found\n", __func__); > + of_node_put(np); > + return 0; > + } > + > + eemi_ops = get_eemi_ops(); > + if (!eemi_ops || !eemi_ops->query_data) { > + pr_err("%s: clk data not found\n", __func__); > + of_node_put(np); > + return 0; > + } > + > + zynqmp_clk_setup(np); > + > + return 0; > +} > +arch_initcall(zynqmp_clock_init); > diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c > new file mode 100644 > index 0000000..1a1473c > --- /dev/null > +++ b/drivers/clk/zynqmp/divider.c > @@ -0,0 +1,239 @@ > +/* > + * Zynq UltraScale+ MPSoC Divider support > + * > + * Copyright (C) 2016-2017 Xilinx > + * > + * SPDX-License-Identifier: GPL-2.0+ Same as above: This tag should be on the fist line this way: // SPDX-License-Identifier: GPL-2.0+ > + * > + * Adjustable divider clock implementation > + */ > + > +#include <linux/clk.h> > +#include <linux/clk-provider.h> > +#include <linux/clk/zynqmp.h> > +#include <linux/module.h> > +#include <linux/slab.h> > +#include <linux/io.h> > +#include <linux/err.h> > +#include <linux/string.h> > +#include <linux/log2.h> > + > +/* > + * DOC: basic adjustable divider clock that cannot gate > + * > + * Traits of this clock: > + * prepare - clk_prepare only ensures that parents are prepared > + * enable - clk_enable only ensures that parents are enabled > + * rate - rate is adjustable. clk->rate = ceiling(parent->rate / divisor) > + * parent - fixed parent. No clk_set_parent support > + */ > + > +#define to_zynqmp_clk_divider(_hw) \ > + container_of(_hw, struct zynqmp_clk_divider, hw) > + > +/** > + * struct zynqmp_clk_divider - adjustable divider clock > + * > + * @hw: handle between common and hardware-specific interfaces > + * @flags: Hardware specific flags > + * @clk_id: Id of clock > + * @div_type: divisor type (TYPE_DIV1 or TYPE_DIV2) > + */ > +struct zynqmp_clk_divider { > + struct clk_hw hw; > + u8 flags; > + u32 clk_id; > + u32 div_type; > +}; > + > +static int zynqmp_divider_get_val(unsigned long parent_rate, unsigned long rate) > +{ > + return DIV_ROUND_UP_ULL((u64)parent_rate, rate); > +} > + > +static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); > + const char *clk_name = clk_hw_get_name(hw); > + u32 clk_id = divider->clk_id; > + u32 div_type = divider->div_type; > + u32 div, value; > + int ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_getdivider) > + return -ENXIO; > + > + ret = eemi_ops->clock_getdivider(clk_id, &div); > + > + if (ret) > + pr_warn_once("%s() get divider failed for %s, ret = %d\n", > + __func__, clk_name, ret); > + > + if (div_type == TYPE_DIV1) > + value = div & 0xFFFF; > + else > + value = (div >> 16) & 0xFFFF; > + > + return zynqmp_divider_get_val((u64)parent_rate, value); > +} > + > +static long zynqmp_clk_divider_round_rate(struct clk_hw *hw, > + unsigned long rate, > + unsigned long *prate) > +{ > + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); > + const char *clk_name = clk_hw_get_name(hw); > + u32 clk_id = divider->clk_id; > + u32 div_type = divider->div_type; > + u32 bestdiv; > + int ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_getdivider) > + return -ENXIO; > + > + /* if read only, just return current value */ > + if (divider->flags & CLK_DIVIDER_READ_ONLY) { > + ret = eemi_ops->clock_getdivider(clk_id, &bestdiv); > + > + if (ret) > + pr_warn_once("%s() get divider failed for %s, ret = %d\n", > + __func__, clk_name, ret); > + if (div_type == TYPE_DIV1) > + bestdiv = bestdiv & 0xFFFF; > + else > + bestdiv = (bestdiv >> 16) & 0xFFFF; > + > + return DIV_ROUND_UP_ULL((u64)*prate, bestdiv); > + } > + > + bestdiv = zynqmp_divider_get_val(*prate, rate); > + > + if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) && > + ((clk_hw_get_flags(hw) & CLK_FRAC))) > + bestdiv = rate % *prate ? 1 : bestdiv; > + *prate = rate * bestdiv; > + > + return rate; > +} > + > +/** > + * zynqmp_clk_divider_set_rate - Set rate of divider clock > + * @hw: handle between common and hardware-specific interfaces > + * @rate: rate of clock to be set > + * @parent_rate: rate of parent clock > + * > + * Return: 0 always > + */ > +static int zynqmp_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate) > +{ > + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); > + const char *clk_name = clk_hw_get_name(hw); > + u32 clk_id = divider->clk_id; > + u32 div_type = divider->div_type; > + u32 value, div; > + int ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_setdivider) > + return -ENXIO; > + > + value = zynqmp_divider_get_val(parent_rate, rate); > + if (div_type == TYPE_DIV1) { > + div = value & 0xFFFF; > + div |= ((u16)-1) << 16; > + } else { > + div = ((u16)-1); > + div |= value << 16; > + } > + > + ret = eemi_ops->clock_setdivider(clk_id, div); > + > + if (ret) > + pr_warn_once("%s() set divider failed for %s, ret = %d\n", > + __func__, clk_name, ret); > + > + return 0; > +} > + > +static const struct clk_ops zynqmp_clk_divider_ops = { > + .recalc_rate = zynqmp_clk_divider_recalc_rate, > + .round_rate = zynqmp_clk_divider_round_rate, > + .set_rate = zynqmp_clk_divider_set_rate, > +}; > + > +/** > + * _register_divider - register a divider clock > + * @dev: device registering this clock > + * @name: name of this clock > + * @clk_id: Id of clock > + * @div_type: Type of divisor > + * @parents: name of clock's parents > + * @num_parents: number of parents > + * @flags: framework-specific flags > + * @clk_divider_flags: divider-specific flags for this clock > + * > + * Return: handle to registered clock divider > + */ > +static struct clk *_register_divider(struct device *dev, const char *name, > + u32 clk_id, u32 div_type, > + const char * const *parents, > + u8 num_parents, unsigned long flags, > + u8 clk_divider_flags) > +{ > + struct zynqmp_clk_divider *div; > + struct clk *clk; > + struct clk_init_data init; > + > + /* allocate the divider */ > + div = kzalloc(sizeof(*div), GFP_KERNEL); > + if (!div) > + return ERR_PTR(-ENOMEM); > + > + init.name = name; > + init.ops = &zynqmp_clk_divider_ops; > + init.flags = flags; > + init.parent_names = parents; > + init.num_parents = num_parents; > + > + /* struct clk_divider assignments */ > + div->flags = clk_divider_flags; > + div->hw.init = &init; > + div->clk_id = clk_id; > + div->div_type = div_type; > + > + /* register the clock */ > + clk = clk_register(dev, &div->hw); > + > + if (IS_ERR(clk)) > + kfree(div); > + > + return clk; > +} > + > +/** > + * zynqmp_clk_register_divider - register a divider clock > + * @dev: device registering this clock > + * @name: name of this clock > + * @clk_id: Id of clock > + * @div_type: Type of divisor > + * @parents: name of clock's parents > + * @num_parents: number of parents > + * @flags: framework-specific flags > + * @clk_divider_flags: divider-specific flags for this clock > + * > + * Return: handle to registered clock divider > + */ > +struct clk *zynqmp_clk_register_divider(struct device *dev, const char *name, > + u32 clk_id, u32 div_type, > + const char * const *parents, > + u8 num_parents, unsigned long flags, > + u8 clk_divider_flags) > +{ > + return _register_divider(dev, name, clk_id, div_type, parents, > + num_parents, flags, clk_divider_flags); > +} > +EXPORT_SYMBOL_GPL(zynqmp_clk_register_divider); > diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c > new file mode 100644 > index 0000000..75def21 > --- /dev/null > +++ b/drivers/clk/zynqmp/pll.c > @@ -0,0 +1,384 @@ > +/* > + * Zynq UltraScale+ MPSoC PLL driver > + * > + * Copyright (C) 2016-2017 Xilinx > + * > + * SPDX-License-Identifier: GPL-2.0+ Same as above: This tag should be on the fist line this way: // SPDX-License-Identifier: GPL-2.0+ > + */ > +#include <linux/clk.h> > +#include <linux/clk/zynqmp.h> > +#include <linux/clk-provider.h> > +#include <linux/slab.h> > +#include <linux/io.h> > + > +/** > + * struct zynqmp_pll - Structure for PLL clock > + * @hw: Handle between common and hardware-specific interfaces > + * @clk_id: PLL clock ID > + */ > +struct zynqmp_pll { > + struct clk_hw hw; > + u32 clk_id; > +}; > + > +#define to_zynqmp_pll(_hw) container_of(_hw, struct zynqmp_pll, hw) > + > +/* Register bitfield defines */ > +#define PLLCTRL_FBDIV_MASK 0x7f00 > +#define PLLCTRL_FBDIV_SHIFT 8 > +#define PLLCTRL_BP_MASK BIT(3) > +#define PLLCTRL_DIV2_MASK BIT(16) > +#define PLLCTRL_RESET_MASK 1 > +#define PLLCTRL_RESET_VAL 1 > +#define PLL_STATUS_LOCKED 1 > +#define PLLCTRL_RESET_SHIFT 0 > +#define PLLCTRL_DIV2_SHIFT 16 > + > +#define PLL_FBDIV_MIN 25 > +#define PLL_FBDIV_MAX 125 > + > +#define PS_PLL_VCO_MIN 1500000000 > +#define PS_PLL_VCO_MAX 3000000000UL > + > +enum pll_mode { > + PLL_MODE_INT, > + PLL_MODE_FRAC, > +}; > + > +#define FRAC_OFFSET 0x8 > +#define PLLFCFG_FRAC_EN BIT(31) > +#define FRAC_DIV 0x10000 /* 2^16 */ > + > +/** > + * pll_get_mode - Get mode of PLL > + * @hw: Handle between common and hardware-specific interfaces > + * > + * Return: Mode of PLL > + */ > +static inline enum pll_mode pll_get_mode(struct clk_hw *hw) > +{ > + struct zynqmp_pll *clk = to_zynqmp_pll(hw); > + u32 clk_id = clk->clk_id; > + const char *clk_name = clk_hw_get_name(hw); > + u32 ret_payload[PAYLOAD_ARG_CNT]; > + int ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->ioctl) > + return -ENXIO; > + > + ret = eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_MODE, clk_id, 0, > + ret_payload); > + if (ret) > + pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n", > + __func__, clk_name, ret); > + > + return ret_payload[1]; > +} > + > +/** > + * pll_set_mode - Set the PLL mode > + * @hw: Handle between common and hardware-specific interfaces > + * @on: Flag to determine the mode > + */ > +static inline void pll_set_mode(struct clk_hw *hw, bool on) > +{ > + struct zynqmp_pll *clk = to_zynqmp_pll(hw); > + u32 clk_id = clk->clk_id; > + const char *clk_name = clk_hw_get_name(hw); > + int ret; > + u32 mode; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->ioctl) { > + pr_warn_once("eemi_ops not found\n"); > + return; > + } > + > + if (on) > + mode = PLL_MODE_FRAC; > + else > + mode = PLL_MODE_INT; > + > + ret = eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_MODE, clk_id, mode, NULL); > + if (ret) > + pr_warn_once("%s() PLL set frac mode failed for %s, ret = %d\n", > + __func__, clk_name, ret); > +} > + > +/** > + * zynqmp_pll_round_rate - Round a clock frequency > + * @hw: Handle between common and hardware-specific interfaces > + * @rate: Desired clock frequency > + * @prate: Clock frequency of parent clock > + * > + * Return: Frequency closest to @rate the hardware can generate > + */ > +static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long *prate) > +{ > + u32 fbdiv; > + long rate_div, f; > + > + /* Enable the fractional mode if needed */ > + rate_div = ((rate * FRAC_DIV) / *prate); > + f = rate_div % FRAC_DIV; > + pll_set_mode(hw, !!f); > + > + if (pll_get_mode(hw) == PLL_MODE_FRAC) { > + if (rate > PS_PLL_VCO_MAX) { > + fbdiv = rate / PS_PLL_VCO_MAX; > + rate = rate / (fbdiv + 1); > + } > + if (rate < PS_PLL_VCO_MIN) { > + fbdiv = DIV_ROUND_UP(PS_PLL_VCO_MIN, rate); > + rate = rate * fbdiv; > + } > + return rate; > + } > + > + fbdiv = DIV_ROUND_CLOSEST(rate, *prate); > + fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX); > + return *prate * fbdiv; > +} > + > +/** > + * zynqmp_pll_recalc_rate - Recalculate clock frequency > + * @hw: Handle between common and hardware-specific interfaces > + * @parent_rate: Clock frequency of parent clock > + * Return: Current clock frequency > + */ > +static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + struct zynqmp_pll *clk = to_zynqmp_pll(hw); > + u32 clk_id = clk->clk_id; > + const char *clk_name = clk_hw_get_name(hw); > + u32 fbdiv, data; > + unsigned long rate, frac; > + u32 ret_payload[PAYLOAD_ARG_CNT]; > + int ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_getdivider) > + return 0; > + > + /* > + * makes probably sense to redundantly save fbdiv in the struct > + * zynqmp_pll to save the IO access. > + */ > + ret = eemi_ops->clock_getdivider(clk_id, &fbdiv); > + if (ret) > + pr_warn_once("%s() get divider failed for %s, ret = %d\n", > + __func__, clk_name, ret); > + > + rate = parent_rate * fbdiv; > + if (pll_get_mode(hw) == PLL_MODE_FRAC) { > + eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_DATA, clk_id, 0, > + ret_payload); > + data = ret_payload[1]; > + frac = (parent_rate * data) / FRAC_DIV; > + rate = rate + frac; > + } > + > + return rate; > +} > + > +/** > + * zynqmp_pll_set_rate - Set rate of PLL > + * @hw: Handle between common and hardware-specific interfaces > + * @rate: Frequency of clock to be set > + * @parent_rate: Clock frequency of parent clock > + */ > +static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate) > +{ > + struct zynqmp_pll *clk = to_zynqmp_pll(hw); > + u32 clk_id = clk->clk_id; > + const char *clk_name = clk_hw_get_name(hw); > + u32 fbdiv, data; > + long rate_div, frac, m, f; > + int ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_setdivider) > + return -ENXIO; > + > + if (pll_get_mode(hw) == PLL_MODE_FRAC) { > + unsigned int children; > + > + /* > + * We're running on a ZynqMP compatible machine, make sure the > + * VPLL only has one child. > + */ > + children = clk_get_children("vpll"); > + > + /* Account for vpll_to_lpd and dp_video_ref */ > + if (children > 2) > + WARN(1, "Two devices are using vpll which is forbidden\n"); > + > + rate_div = ((rate * FRAC_DIV) / parent_rate); > + m = rate_div / FRAC_DIV; > + f = rate_div % FRAC_DIV; > + m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX)); > + rate = parent_rate * m; > + frac = (parent_rate * f) / FRAC_DIV; > + > + ret = eemi_ops->clock_setdivider(clk_id, m); > + if (ret) > + pr_warn_once("%s() set divider failed for %s, ret = %d\n", > + __func__, clk_name, ret); > + > + data = (FRAC_DIV * f) / FRAC_DIV; > + eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_DATA, clk_id, data, NULL); > + > + return (rate + frac); > + } > + > + fbdiv = DIV_ROUND_CLOSEST(rate, parent_rate); > + fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX); > + ret = eemi_ops->clock_setdivider(clk_id, fbdiv); > + if (ret) > + pr_warn_once("%s() set divider failed for %s, ret = %d\n", > + __func__, clk_name, ret); > + > + return parent_rate * fbdiv; > +} > + > +/** > + * zynqmp_pll_is_enabled - Check if a clock is enabled > + * @hw: Handle between common and hardware-specific interfaces > + * > + * Return: 1 if the clock is enabled, 0 otherwise > + */ > +static int zynqmp_pll_is_enabled(struct clk_hw *hw) > +{ > + struct zynqmp_pll *clk = to_zynqmp_pll(hw); > + const char *clk_name = clk_hw_get_name(hw); > + u32 clk_id = clk->clk_id; > + unsigned int state; > + int ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_getstate) > + return 0; > + > + ret = eemi_ops->clock_getstate(clk_id, &state); > + if (ret) > + pr_warn_once("%s() clock get state failed for %s, ret = %d\n", > + __func__, clk_name, ret); > + > + return state ? 1 : 0; > +} > + > +/** > + * zynqmp_pll_enable - Enable clock > + * @hw: Handle between common and hardware-specific interfaces > + * > + * Return: 0 always > + */ > +static int zynqmp_pll_enable(struct clk_hw *hw) > +{ > + struct zynqmp_pll *clk = to_zynqmp_pll(hw); > + const char *clk_name = clk_hw_get_name(hw); > + u32 clk_id = clk->clk_id; > + int ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_enable) > + return 0; > + > + if (zynqmp_pll_is_enabled(hw)) > + return 0; > + > + pr_info("PLL: enable\n"); > + > + ret = eemi_ops->clock_enable(clk_id); > + if (ret) > + pr_warn_once("%s() clock enable failed for %s, ret = %d\n", > + __func__, clk_name, ret); > + > + return 0; > +} > + > +/** > + * zynqmp_pll_disable - Disable clock > + * @hw: Handle between common and hardware-specific interfaces > + * > + */ > +static void zynqmp_pll_disable(struct clk_hw *hw) > +{ > + struct zynqmp_pll *clk = to_zynqmp_pll(hw); > + const char *clk_name = clk_hw_get_name(hw); > + u32 clk_id = clk->clk_id; > + int ret; > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); > + > + if (!eemi_ops || !eemi_ops->clock_disable) > + return; > + > + if (!zynqmp_pll_is_enabled(hw)) > + return; > + > + pr_info("PLL: shutdown\n"); > + > + ret = eemi_ops->clock_disable(clk_id); > + if (ret) > + pr_warn_once("%s() clock disable failed for %s, ret = %d\n", > + __func__, clk_name, ret); > +} > + > +static const struct clk_ops zynqmp_pll_ops = { > + .enable = zynqmp_pll_enable, > + .disable = zynqmp_pll_disable, > + .is_enabled = zynqmp_pll_is_enabled, > + .round_rate = zynqmp_pll_round_rate, > + .recalc_rate = zynqmp_pll_recalc_rate, > + .set_rate = zynqmp_pll_set_rate, > +}; > + > +/** > + * clk_register_zynqmp_pll - Register PLL with the clock framework > + * @name: PLL name > + * @flag: PLL flags > + * @parents: Parent clock names > + * @num_parents:Number of parents > + * @pll_ctrl: Pointer to PLL control register > + * @pll_status: Pointer to PLL status register > + * @lock_index: Bit index to this PLL's lock status bit in @pll_status > + * > + * Return: Handle to the registered clock > + */ > +struct clk *clk_register_zynqmp_pll(const char *name, u32 clk_id, > + const char * const *parents, > + u8 num_parents, unsigned long flag) > +{ > + struct zynqmp_pll *pll; > + struct clk *clk; > + struct clk_init_data init; > + int status; > + > + init.name = name; > + init.ops = &zynqmp_pll_ops; > + init.flags = flag; > + init.parent_names = parents; > + init.num_parents = num_parents; > + > + pll = kmalloc(sizeof(*pll), GFP_KERNEL); > + if (!pll) > + return ERR_PTR(-ENOMEM); > + > + /* Populate the struct */ > + pll->hw.init = &init; > + pll->clk_id = clk_id; > + > + clk = clk_register(NULL, &pll->hw); > + if (WARN_ON(IS_ERR(clk))) > + kfree(pll); > + > + status = clk_set_rate_range(clk, PS_PLL_VCO_MIN, PS_PLL_VCO_MAX); > + if (status < 0) > + pr_err("%s:ERROR clk_set_rate_range failed %d\n", name, status); > + > + return clk; > +} > diff --git a/include/linux/clk/zynqmp.h b/include/linux/clk/zynqmp.h > new file mode 100644 > index 0000000..024ebf8 > --- /dev/null > +++ b/include/linux/clk/zynqmp.h > @@ -0,0 +1,46 @@ > +/* > + * Copyright (C) 2016-2017 Xilinx > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ This tag should be on the fist line this way: /* SPDX-License-Identifier: GPL-2.0+ */ > + > +#ifndef __LINUX_CLK_ZYNQMP_H_ > +#define __LINUX_CLK_ZYNQMP_H_ > + > +#include <linux/spinlock.h> > +#include <linux/firmware/xilinx/zynqmp/firmware.h> > + > +#define CLK_FRAC BIT(13) /* has a fractional parent */ > + > +struct device; > + > +struct clk *clk_register_zynqmp_pll(const char *name, u32 clk_id, > + const char * const *parent, u8 num_parents, > + unsigned long flag); > + > +struct clk *zynqmp_clk_register_gate(struct device *dev, const char *name, > + u32 clk_id, > + const char * const *parent_name, > + u8 num_parents, unsigned long flags, > + u8 clk_gate_flags); > + > +struct clk *zynqmp_clk_register_divider(struct device *dev, const char *name, > + u32 clk_id, u32 div_type, > + const char * const *parent_name, > + u8 num_parents, > + unsigned long flags, > + u8 clk_divider_flags); > + > +struct clk *zynqmp_clk_register_mux(struct device *dev, const char *name, > + u32 clk_id, > + const char **parent_names, > + u8 num_parents, unsigned long flags, > + u8 clk_mux_flags); > + > +struct clk *zynqmp_clk_register_mux_table(struct device *dev, const char *name, > + u32 clk_id, > + const char * const *parent_names, > + u8 num_parents, unsigned long flags, > + u8 clk_mux_flags); > + > +#endif > -- > 2.7.4 >
Hi Philippe, Thanks for the review. Will fix all SPDX tags in next version. Thanks, Jolly Shah > -----Original Message----- > From: Philippe Ombredanne [mailto:pombredanne@nexb.com] > Sent: Tuesday, January 09, 2018 4:53 AM > To: Jolly Shah <JOLLYS@xilinx.com> > Cc: Michael Turquette <mturquette@baylibre.com>; Stephen Boyd > <sboyd@codeaurora.org>; Michal Simek <michal.simek@xilinx.com>; linux- > clk@vger.kernel.org; moderated list:ARM/FREESCALE IMX / MXC ARM > ARCHITECTURE <linux-arm-kernel@lists.infradead.org>; LKML <linux- > kernel@vger.kernel.org>; Jolly Shah <JOLLYS@xilinx.com>; Rajan Vaja > <RAJANV@xilinx.com>; Tejas Patel <TEJASP@xilinx.com>; Shubhrajyoti Datta > <shubhraj@xilinx.com> > Subject: Re: [RFC PATCH 2/2] drivers: clk: Add ZynqMP clock driver > > Jolly, > > On Mon, Jan 8, 2018 at 11:16 PM, Jolly Shah <jolly.shah@xilinx.com> wrote: > > This patch adds CCF compliant clock driver for ZynqMP. > > Clock driver queries supported clock information from > > firmware and regiters pll and output clocks with CCF. > > > > Signed-off-by: Jolly Shah <jollys@xilinx.com> > > Signed-off-by: Rajan Vaja <rajanv@xilinx.com> > > Signed-off-by: Tejas Patel <tejasp@xilinx.com> > > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> > > --- > > <snip> > > > > .../devicetree/bindings/clock/zynq_mpsoc.txt | 163 +++++ > > drivers/clk/Kconfig | 1 + > > drivers/clk/Makefile | 1 + > > drivers/clk/zynqmp/Kconfig | 8 + > > drivers/clk/zynqmp/Makefile | 3 + > > drivers/clk/zynqmp/clk-gate-zynqmp.c | 158 +++++ > > drivers/clk/zynqmp/clk-mux-zynqmp.c | 190 ++++++ > > drivers/clk/zynqmp/clkc.c | 707 +++++++++++++++++++++ > > drivers/clk/zynqmp/divider.c | 239 +++++++ > > drivers/clk/zynqmp/pll.c | 384 +++++++++++ > > include/linux/clk/zynqmp.h | 46 ++ > > 11 files changed, 1900 insertions(+) > > create mode 100644 > Documentation/devicetree/bindings/clock/zynq_mpsoc.txt > > create mode 100644 drivers/clk/zynqmp/Kconfig > > create mode 100644 drivers/clk/zynqmp/Makefile > > create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c > > create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c > > create mode 100644 drivers/clk/zynqmp/clkc.c > > create mode 100644 drivers/clk/zynqmp/divider.c > > create mode 100644 drivers/clk/zynqmp/pll.c > > create mode 100644 include/linux/clk/zynqmp.h > >
diff --git a/Documentation/devicetree/bindings/clock/zynq_mpsoc.txt b/Documentation/devicetree/bindings/clock/zynq_mpsoc.txt new file mode 100644 index 0000000..9061b57 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/zynq_mpsoc.txt @@ -0,0 +1,163 @@ +Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC + +The Zynq Ultrascale+ MPSoC has several different clk providers, +each with there own bindings. +The purpose of this document is to document their usage. + +See clock_bindings.txt for more information on the generic clock bindings. + +== Clock Controller == +The clock controller is a logical abstraction of Zynq Ultrascale+ MPSoC clock +tree. It reads required input clock frequencies from the devicetree and acts +as clock provider for all clock consumers of PS clocks. + +Required properties: + - #clock-cells : Must be 1 + - compatible : "xlnx,zynqmp-clkc" + - clocks : list of clock specifiers which are external input clocks to the + given clock controller. Please refer the next section to find + the input clocks for a given controller. + - clock-names : list of names of clocks which are exteral input clocks to the + given clock controller. Please refer to the clock bindings + for more details + +Input clocks for zynqmp Ultrascale+ clock controller: +The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock +inputs. +These required clock inputs are the + - pss_ref_clk (PS reference clock) + - video_clk (reference clock for video system ) + - pss_alt_ref_clk (alternative PS reference clock) + - aux_ref_clk + - gt_crx_ref_clk (transceiver reference clock) + +The following strings are optional parameters to the 'clock-names' property in +order to provide an optional (E)MIO clock source. + - swdt0_ext_clk + - swdt1_ext_clk + - gem0_emio_clk + - gem1_emio_clk + - gem2_emio_clk + - gem3_emio_clk + - mio_clk_XX # with XX = 00..77 + - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51 + + +Output clocks for zynqmp Ultrascale+ clock controller: +Output clocks are registered based on clock information received from firmware. +Output clock indexes are mentioned below: + +Clock ID: Output clock name: +------------------------------------- +0 iopll +1 rpll +2 apll +3 dpll +4 vpll +5 iopll_to_fpd +6 rpll_to_fpd +7 apll_to_lpd +8 dpll_to_lpd +9 vpll_to_lpd +10 acpu +11 acpu_half +12 dbf_fpd +13 dbf_lpd +14 dbg_trace +15 dbg_tstmp +16 dp_video_ref +17 dp_audio_ref +18 dp_stc_ref +19 gdma_ref +20 dpdma_ref +21 ddr_ref +22 sata_ref +23 pcie_ref +24 gpu_ref +25 gpu_pp0_ref +26 gpu_pp1_ref +27 topsw_main +28 topsw_lsbus +29 gtgref0_ref +30 lpd_switch +31 lpd_lsbus +32 usb0_bus_ref +33 usb1_bus_ref +34 usb3_dual_ref +35 usb0 +36 usb1 +37 cpu_r5 +38 cpu_r5_core +39 csu_spb +40 csu_pll +41 pcap +42 iou_switch +43 gem_tsu_ref +44 gem_tsu +45 gem0_ref +46 gem1_ref +47 gem2_ref +48 gem3_ref +49 gem0_tx +50 gem1_tx +51 gem2_tx +52 gem3_tx +53 qspi_ref +54 sdio0_ref +55 sdio1_ref +56 uart0_ref +57 uart1_ref +58 spi0_ref +59 spi1_ref +60 nand_ref +61 i2c0_ref +62 i2c1_ref +63 can0_ref +64 can1_ref +65 can0 +66 can1 +67 dll_ref +68 adma_ref +69 timestamp_ref +70 ams_ref +71 pl0_ref +72 pl1_ref +73 pl2_ref +74 pl3_ref +75 wdt +76 iopll_int +77 iopll_pre_src +78 iopll_half +79 iopll_int_mux +80 iopll_post_src +81 rpll_int +82 rpll_pre_src +83 rpll_half +84 rpll_int_mux +85 rpll_post_src +86 apll_int +87 apll_pre_src +88 apll_half +89 apll_int_mux +90 apll_post_src +91 dpll_int +92 dpll_pre_src +93 dpll_half +94 dpll_int_mux +95 dpll_post_src +96 vpll_int +97 vpll_pre_src +98 vpll_half +99 vpll_int_mux +100 vpll_post_src +101 can0_mio +102 can1_mio + +Example: + +clkc: clkc@ff5e0020 { + #clock-cells = <1>; + compatible = "xlnx,zynqmp-clkc"; + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>; + clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk" +}; diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 1c4e1aa..526f4f5 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -239,6 +239,7 @@ source "drivers/clk/samsung/Kconfig" source "drivers/clk/sunxi-ng/Kconfig" source "drivers/clk/tegra/Kconfig" source "drivers/clk/ti/Kconfig" +source "drivers/clk/zynqmp/Kconfig" source "drivers/clk/uniphier/Kconfig" endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f7f761b..d7328b4 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -98,3 +98,4 @@ obj-$(CONFIG_X86) += x86/ endif obj-$(CONFIG_ARCH_ZX) += zte/ obj-$(CONFIG_ARCH_ZYNQ) += zynq/ +obj-$(CONFIG_COMMON_CLK_ZYNQMP) += zynqmp/ diff --git a/drivers/clk/zynqmp/Kconfig b/drivers/clk/zynqmp/Kconfig new file mode 100644 index 0000000..a6d54e9 --- /dev/null +++ b/drivers/clk/zynqmp/Kconfig @@ -0,0 +1,8 @@ +config COMMON_CLK_ZYNQMP + bool "Support for Xilinx ZynqMP Ultrascale+ clock controllers" + depends on OF + depends on ARCH_ZYNQMP || COMPILE_TEST + help + Support for the Zynqmp Ultrascale clock controller. + It has a dependency on the PMU firmware. + Say Y if you want to support clock support diff --git a/drivers/clk/zynqmp/Makefile b/drivers/clk/zynqmp/Makefile new file mode 100644 index 0000000..7d50f7a --- /dev/null +++ b/drivers/clk/zynqmp/Makefile @@ -0,0 +1,3 @@ +# Zynq Ultrascale+ MPSoC clock specific Makefile + +obj-$(CONFIG_ARCH_ZYNQMP) += pll.o clk-gate-zynqmp.o divider.o clk-mux-zynqmp.o clkc.o diff --git a/drivers/clk/zynqmp/clk-gate-zynqmp.c b/drivers/clk/zynqmp/clk-gate-zynqmp.c new file mode 100644 index 0000000..45eeed8 --- /dev/null +++ b/drivers/clk/zynqmp/clk-gate-zynqmp.c @@ -0,0 +1,158 @@ +/* + * Zynq UltraScale+ MPSoC clock controller + * + * Copyright (C) 2016-2017 Xilinx + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Gated clock implementation + */ + +#include <linux/clk-provider.h> +#include <linux/clk/zynqmp.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/string.h> + +/** + * struct clk_gate - gating clock + * + * @hw: handle between common and hardware-specific interfaces + * @flags: hardware-specific flags + * @clk_id: Id of clock + */ +struct zynqmp_clk_gate { + struct clk_hw hw; + u8 flags; + u32 clk_id; +}; + +#define to_zynqmp_clk_gate(_hw) container_of(_hw, struct zynqmp_clk_gate, hw) + +/** + * zynqmp_clk_gate_enable - Enable clock + * @hw: handle between common and hardware-specific interfaces + * + * Return: 0 always + */ +static int zynqmp_clk_gate_enable(struct clk_hw *hw) +{ + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = gate->clk_id; + int ret = 0; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_enable) + return -ENXIO; + + ret = eemi_ops->clock_enable(clk_id); + + if (ret) + pr_warn_once("%s() clock enabled failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return 0; +} + +/* + * zynqmp_clk_gate_disable - Disable clock + * @hw: handle between common and hardware-specific interfaces + */ +static void zynqmp_clk_gate_disable(struct clk_hw *hw) +{ + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = gate->clk_id; + int ret = 0; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_disable) + return; + + ret = eemi_ops->clock_disable(clk_id); + + if (ret) + pr_warn_once("%s() clock disable failed for %s, ret = %d\n", + __func__, clk_name, ret); +} + +/** + * zynqmp_clk_gate_is_enable - Check clock state + * @hw: handle between common and hardware-specific interfaces + * + * Return: 1 if enabled + * 0 if disabled + */ +static int zynqmp_clk_gate_is_enabled(struct clk_hw *hw) +{ + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = gate->clk_id; + int state, ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_getstate) + return 0; + + ret = eemi_ops->clock_getstate(clk_id, &state); + if (ret) + pr_warn_once("%s() clock get state failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return state ? 1 : 0; +} + +const struct clk_ops zynqmp_clk_gate_ops = { + .enable = zynqmp_clk_gate_enable, + .disable = zynqmp_clk_gate_disable, + .is_enabled = zynqmp_clk_gate_is_enabled, +}; +EXPORT_SYMBOL_GPL(zynqmp_clk_gate_ops); + +/** + * zynqmp_clk_register_gate - register a gate clock with the clock framework + * @dev: device that is registering this clock + * @name: name of this clock + * @clk_id: Id of this clock + * @parents: name of this clock's parents + * @num_parents: number of parents + * @flags: framework-specific flags for this clock + * @clk_gate_flags: gate-specific flags for this clock + * + * Return: clock handle of the registered clock gate + */ +struct clk *zynqmp_clk_register_gate(struct device *dev, const char *name, + u32 clk_id, const char * const *parents, + u8 num_parents, unsigned long flags, + u8 clk_gate_flags) +{ + struct zynqmp_clk_gate *gate; + struct clk *clk; + struct clk_init_data init; + + /* allocate the gate */ + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &zynqmp_clk_gate_ops; + init.flags = flags; + init.parent_names = parents; + init.num_parents = num_parents; + + /* struct clk_gate assignments */ + gate->flags = clk_gate_flags; + gate->hw.init = &init; + gate->clk_id = clk_id; + + clk = clk_register(dev, &gate->hw); + + if (IS_ERR(clk)) + kfree(gate); + + return clk; +} diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c new file mode 100644 index 0000000..ee36244 --- /dev/null +++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c @@ -0,0 +1,190 @@ +/* + * Zynq UltraScale+ MPSoC mux + * + * Copyright (C) 2016-2017 Xilinx + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/clk-provider.h> +#include <linux/clk/zynqmp.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> + +/* + * DOC: basic adjustable multiplexer clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is only affected by parent switching. No clk_set_rate support + * parent - parent is adjustable through clk_set_parent + */ + +/** + * struct zynqmp_clk_mux - multiplexer clock + * + * @hw: handle between common and hardware-specific interfaces + * @flags: hardware-specific flags + * @clk_id: Id of clock + */ +struct zynqmp_clk_mux { + struct clk_hw hw; + u8 flags; + u32 clk_id; +}; + +#define to_zynqmp_clk_mux(_hw) container_of(_hw, struct zynqmp_clk_mux, hw) + +/** + * zynqmp_clk_mux_get_parent - Get parent of clock + * @hw: handle between common and hardware-specific interfaces + * + * Return: Parent index + */ +static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw) +{ + struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = mux->clk_id; + u32 val; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_getparent) + return -ENXIO; + + ret = eemi_ops->clock_getparent(clk_id, &val); + + if (ret) + pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n", + __func__, clk_name, ret); + + if (val && (mux->flags & CLK_MUX_INDEX_BIT)) + val = ffs(val) - 1; + + if (val && (mux->flags & CLK_MUX_INDEX_ONE)) + val--; + + return val; +} + +/** + * zynqmp_clk_mux_set_parent - Set parent of clock + * @hw: handle between common and hardware-specific interfaces + * @index: Parent index + * + * Return: 0 always + */ +static int zynqmp_clk_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = mux->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_setparent) + return -ENXIO; + + if (mux->flags & CLK_MUX_INDEX_BIT) + index = 1 << index; + + if (mux->flags & CLK_MUX_INDEX_ONE) + index++; + + ret = eemi_ops->clock_setparent(clk_id, index); + + if (ret) + pr_warn_once("%s() set parent failed for clock: %s, ret = %d\n", + __func__, clk_name, ret); + + return 0; +} + +const struct clk_ops zynqmp_clk_mux_ops = { + .get_parent = zynqmp_clk_mux_get_parent, + .set_parent = zynqmp_clk_mux_set_parent, + .determine_rate = __clk_mux_determine_rate, +}; +EXPORT_SYMBOL_GPL(zynqmp_clk_mux_ops); + +const struct clk_ops zynqmp_clk_mux_ro_ops = { + .get_parent = zynqmp_clk_mux_get_parent, +}; +EXPORT_SYMBOL_GPL(zynqmp_clk_mux_ro_ops); + +/** + * zynqmp_clk_register_mux_table - register a mux table with the clock framework + * @dev: device that is registering this clock + * @name: name of this clock + * @clk_id: Id of this clock + * @parent_names: name of this clock's parents + * @num_parents: number of parents + * @flags: framework-specific flags for this clock + * @clk_mux_flags: mux-specific flags for this clock + * + * Return: clock handle of the registered clock mux + */ +struct clk *zynqmp_clk_register_mux_table(struct device *dev, const char *name, + u32 clk_id, + const char * const *parent_names, + u8 num_parents, + unsigned long flags, + u8 clk_mux_flags) +{ + struct zynqmp_clk_mux *mux; + struct clk *clk; + struct clk_init_data init; + + /* allocate the mux */ + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) + return ERR_PTR(-ENOMEM); + + init.name = name; + if (clk_mux_flags & CLK_MUX_READ_ONLY) + init.ops = &zynqmp_clk_mux_ro_ops; + else + init.ops = &zynqmp_clk_mux_ops; + init.flags = flags; + init.parent_names = parent_names; + init.num_parents = num_parents; + + /* struct clk_mux assignments */ + mux->flags = clk_mux_flags; + mux->hw.init = &init; + mux->clk_id = clk_id; + + clk = clk_register(dev, &mux->hw); + + if (IS_ERR(clk)) + kfree(mux); + + return clk; +} +EXPORT_SYMBOL_GPL(zynqmp_clk_register_mux_table); + +/** + * zynqmp_clk_register_mux - register a mux clock with the clock framework + * @dev: device that is registering this clock + * @name: name of this clock + * @clk_id: Id of this clock + * @parent_names: name of this clock's parents + * @num_parents: number of parents + * @flags: framework-specific flags for this clock + * @clk_mux_flags: mux-specific flags for this clock + * + * Return: clock handle of the registered clock mux + */ +struct clk *zynqmp_clk_register_mux(struct device *dev, const char *name, + u32 clk_id, const char **parent_names, + u8 num_parents, unsigned long flags, + u8 clk_mux_flags) +{ + return zynqmp_clk_register_mux_table(dev, name, clk_id, parent_names, + num_parents, flags, clk_mux_flags); +} +EXPORT_SYMBOL_GPL(zynqmp_clk_register_mux); diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c new file mode 100644 index 0000000..36bf1c1 --- /dev/null +++ b/drivers/clk/zynqmp/clkc.c @@ -0,0 +1,707 @@ +/* + * Zynq UltraScale+ MPSoC clock controller + * + * Copyright (C) 2016-2017 Xilinx + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Based on drivers/clk/zynq/clkc.c + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clk/zynqmp.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/string.h> + +#define MAX_PARENT 100 +#define MAX_NODES 6 +#define MAX_NAME_LEN 50 +#define MAX_CLOCK 300 + +#define CLK_INIT_ENABLE_SHIFT 1 +#define CLK_TYPE_SHIFT 2 + +#define PM_API_PAYLOAD_LEN 3 + +#define NA_PARENT -1 +#define DUMMY_PARENT -2 + +#define CLK_TYPE_FIELD_LEN 4 +#define CLK_TOPOLOGY_NODE_OFFSET 16 +#define NODES_PER_RESP 3 + +#define CLK_TYPE_FIELD_MASK 0xF +#define CLK_FLAG_FIELD_SHIFT 8 +#define CLK_FLAG_FIELD_MASK 0x3FFF +#define CLK_TYPE_FLAG_FIELD_SHIFT 24 +#define CLK_TYPE_FLAG_FIELD_MASK 0xFF + +#define CLK_PARENTS_ID_LEN 16 +#define CLK_PARENTS_ID_MASK 0xFFFF + +/* Flags for parents */ +#define PARENT_CLK_SELF 0 +#define PARENT_CLK_NODE1 1 +#define PARENT_CLK_NODE2 2 +#define PARENT_CLK_NODE3 3 +#define PARENT_CLK_NODE4 4 +#define PARENT_CLK_EXTERNAL 5 + +#define END_OF_CLK_NAME "END_OF_CLK" +#define RESERVED_CLK_NAME "" + +#define CLK_VALID_MASK 0x1 +#define CLK_INIT_ENABLE_MASK (0x1 << CLK_INIT_ENABLE_SHIFT) + +enum clk_type { + CLK_TYPE_OUTPUT, + CLK_TYPE_EXTERNAL, +}; + +/** + * struct clock_parent - Structure for parent of clock + * @id: Parent clock ID + * @flag: Parent flags + */ +struct clock_parent { + char name[MAX_NAME_LEN]; + int id; + u32 flag; +}; + +/** + * struct clock_topology - Structure for topology of clock + * @type: Type of topology + * @flag: Topology flags + * @type_flag: Topology type specific flag + */ +struct clock_topology { + u32 type; + u32 flag; + u32 type_flag; +}; + +/** + * struct zynqmp_clock - Structure for clock + * @clk_name: Clock name + * @valid: Validity flag of clock + * @init_enable: init_enable flag of clock + * @topology: structure of topology of clock + * @num_node: Number of nodes present in topology + * @parent: structure of parent of clock + * @num_parents: Number of parents of clock + * @type: Type of clock + */ +struct zynqmp_clock { + char clk_name[MAX_NAME_LEN]; + u32 valid; + u32 init_enable; + enum clk_type type; + struct clock_topology node[MAX_NODES]; + u32 num_nodes; + struct clock_parent parent[MAX_PARENT]; + u32 num_parents; +}; + +static const char clk_type_postfix[][10] = { + [TYPE_INVALID] = "", + [TYPE_MUX] = "_mux", + [TYPE_GATE] = "", + [TYPE_DIV1] = "_div1", + [TYPE_DIV2] = "_div2", + [TYPE_FIXEDFACTOR] = "_ff", + [TYPE_PLL] = "" +}; + +static struct zynqmp_clock clock[MAX_CLOCK]; +static struct clk_onecell_data zynqmp_clk_data; +static struct clk *zynqmp_clks[MAX_CLOCK]; +static unsigned int clock_max_idx; +static const struct zynqmp_eemi_ops *eemi_ops; + +/** + * is_valid_clock - Check whether clock is valid or not + * @clk_id: Clock Index + * @valid: 1: if clock is valid + * 0: invalid clock + * + * Return: 0 Success + * Error code: Failure + */ +static int is_valid_clock(u32 clk_id, u32 *valid) +{ + if (clk_id < 0 || clk_id > clock_max_idx) + return -ENODEV; + + *valid = clock[clk_id].valid; + + return *valid ? 0 : -EINVAL; +} + +/** + * zynqmp_get_clock_name - Get name of clock from clock index + * @clk_id: Clock index + * @clk_name: Name of clock + * + * Return: 0: Success + * Error code: failure + */ +static int zynqmp_get_clock_name(u32 clk_id, char *clk_name) +{ + int ret; + u32 valid; + + ret = is_valid_clock(clk_id, &valid); + if (!ret && valid) { + strncpy(clk_name, clock[clk_id].clk_name, MAX_NAME_LEN); + return 0; + } else { + return ret; + } +} + +/** + * get_clock_type - Get type of clock + * @clk_id: Clock Index + * @type: Clock type: CLK_TYPE_OUTPUT or CLK_TYPE_EXTERNAL + * + * Return: 0: Success + * Error code: failure + */ +static int get_clock_type(u32 clk_id, u32 *type) +{ + int ret; + u32 valid; + + ret = is_valid_clock(clk_id, &valid); + if (!ret && valid) { + *type = clock[clk_id].type; + return 0; + } else { + return ret; + } +} + +/** + * zynqmp_pm_clock_get_name - Get the name of clock for given id + * @clock_id: ID of the clock to be queried + * @name: Name of given clock + * + * This function is used to get name of clock specified by given + * clock ID. + * + * Return: Returns status, in case of error name would be 0. + */ +static int zynqmp_pm_clock_get_name(u32 clock_id, char *name) +{ + struct zynqmp_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + + qdata.qid = PM_QID_CLOCK_GET_NAME; + qdata.arg1 = clock_id; + + eemi_ops->query_data(qdata, ret_payload); + memcpy(name, ret_payload, CLK_GET_NAME_RESP_LEN); + + return 0; +} + +/** + * zynqmp_pm_clock_get_topology - Get the topology of clock for given id + * @clock_id: ID of the clock to be queried + * @index: Node index of clock topology + * @topology: Buffer to store nodes in topology and flags + * + * This function is used to get topology information for the clock + * specified by given clock ID. + * + * This API will return 3 node of topology with a single response. To get + * other nodes, master should call same API in loop with new + * index till error is returned. E.g First call should have + * index 0 which will return nodes 0,1 and 2. Next call, index + * should be 3 which will return nodes 3,4 and 5 and so on. + * + * Return: Returns status, either success or error+reason. + */ +static int zynqmp_pm_clock_get_topology(u32 clock_id, u32 index, u32 *topology) +{ + struct zynqmp_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + + qdata.qid = PM_QID_CLOCK_GET_TOPOLOGY; + qdata.arg1 = clock_id; + qdata.arg2 = index; + + eemi_ops->query_data(qdata, ret_payload); + memcpy(topology, &ret_payload[1], CLK_GET_TOPOLOGY_RESP_WORDS * 4); + + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]); +} + +/** + * zynqmp_pm_clock_get_fixedfactor_params - Get the clock's fixed factor + * parameters for fixed clock + * @clock_id: Clock ID + * @mul: Multiplication value + * @div: Divisor value + * + * This function is used to get fixed factor parameers for the fixed + * clock. This API is application only for the fixed clock. + * + * Return: Returns status, either success or error+reason. + */ +static int zynqmp_pm_clock_get_fixedfactor_params(u32 clock_id, + u32 *mul, + u32 *div) +{ + struct zynqmp_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + + qdata.qid = PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS; + qdata.arg1 = clock_id; + + eemi_ops->query_data(qdata, ret_payload); + *mul = ret_payload[1]; + *div = ret_payload[2]; + + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]); +} + +/** + * zynqmp_pm_clock_get_parents - Get the first 3 parents of clock for given id + * @clock_id: Clock ID + * @index: Parent index + * @parents: 3 parents of the given clock + * + * This function is used to get 3 parents for the clock specified by + * given clock ID. + * + * This API will return 3 parents with a single response. To get + * other parents, master should call same API in loop with new + * parent index till error is returned. E.g First call should have + * index 0 which will return parents 0,1 and 2. Next call, index + * should be 3 which will return parent 3,4 and 5 and so on. + * + * Return: Returns status, either success or error+reason. + */ +static int zynqmp_pm_clock_get_parents(u32 clock_id, u32 index, u32 *parents) +{ + struct zynqmp_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + + qdata.qid = PM_QID_CLOCK_GET_PARENTS; + qdata.arg1 = clock_id; + qdata.arg2 = index; + + eemi_ops->query_data(qdata, ret_payload); + memcpy(parents, &ret_payload[1], CLK_GET_PARENTS_RESP_WORDS * 4); + + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]); +} + +/** + * zynqmp_pm_clock_get_attributes - Get the attributes of clock for given id + * @clock_id: Clock ID + * @attributes: Clock attributes + * + * This function is used to get clock's attributes(e.g. valid, clock type, etc). + * + * Return: Returns status, either success or error+reason. + */ +static int zynqmp_pm_clock_get_attributes(u32 clock_id, u32 *attr) +{ + struct zynqmp_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + + qdata.qid = PM_QID_CLOCK_GET_ATTRIBUTES; + qdata.arg1 = clock_id; + + eemi_ops->query_data(qdata, ret_payload); + memcpy(attr, &ret_payload[1], CLK_GET_ATTR_RESP_WORDS * 4); + + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]); +} + +/** + * clock_get_topology: Get topology of clock from firmware using PM_API + * @clk_id: Clock Index + * @clk_topology: Structure of clock topology + * @num_nodes: number of nodes + * + * Return: 0: Success + * Error Code: Failure + */ +static int clock_get_topology(u32 clk_id, struct clock_topology *clk_topology, + u32 *num_nodes) +{ + int j, k = 0, ret; + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0}; + + *num_nodes = 0; + for (j = 0; j <= MAX_NODES; j += 3) { + ret = zynqmp_pm_clock_get_topology(clk_id, j, pm_resp); + if (ret) + return ret; + for (k = 0; k < PM_API_PAYLOAD_LEN; k++) { + if (!(pm_resp[k] & CLK_TYPE_FIELD_MASK)) + goto done; + clk_topology[*num_nodes].type = pm_resp[k] & + CLK_TYPE_FIELD_MASK; + clk_topology[*num_nodes].flag = + (pm_resp[k] >> CLK_FLAG_FIELD_SHIFT) & + CLK_FLAG_FIELD_MASK; + clk_topology[*num_nodes].type_flag = + (pm_resp[k] >> CLK_TYPE_FLAG_FIELD_SHIFT) & + CLK_TYPE_FLAG_FIELD_MASK; + (*num_nodes)++; + } + } +done: + return 0; +} + +/** + * clock_get_parents: Get parents info from firmware using PM_API + * @clk_id: Clock Index + * @parent: Structure of parent information + * @num_parents: Total number of parents + * + * Return: 0: Success + * Error code: Failure + */ +static int clock_get_parents(u32 clk_id, struct clock_parent *parents, + u32 *num_parents) +{ + int j = 0, k, ret, total_parents = 0; + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0}; + + do { + /* Get parents from firmware */ + ret = zynqmp_pm_clock_get_parents(clk_id, j, pm_resp); + if (ret) + return ret; + + for (k = 0; k < PM_API_PAYLOAD_LEN; k++) { + if (pm_resp[k] == (u32)NA_PARENT) { + *num_parents = total_parents; + return 0; + } + + parents[k + j].id = pm_resp[k] & CLK_PARENTS_ID_MASK; + if (parents[k + j].id == DUMMY_PARENT) { + strncpy(parents[k + j].name, + "dummy_name", MAX_NAME_LEN); + parents[k + j].flag = 0; + } else { + parents[k + j].flag = pm_resp[k] >> + CLK_PARENTS_ID_LEN; + if (zynqmp_get_clock_name(parents[k + j].id, + parents[k + j].name)) + continue; + } + total_parents++; + } + j += PM_API_PAYLOAD_LEN; + } while (total_parents <= MAX_PARENT); + return 0; +} + +/** + * get_parent_list: Create list of parents name + * @np: Device node + * @clk_id: Clock Index + * @parent_list List of parent's name + * @num_parents: Total number of parents + * + # Return: 0: Success + * Error code: Failure + */ +static int get_parent_list(struct device_node *np, u32 clk_id, + const char **parent_list, u32 *num_parents) +{ + int i = 0, ret; + u32 total_parents = clock[clk_id].num_parents; + struct clock_topology *clk_nodes; + struct clock_parent *parents; + + clk_nodes = clock[clk_id].node; + parents = clock[clk_id].parent; + + for (i = 0; i < total_parents; i++) { + if (!parents[i].flag) { + parent_list[i] = parents[i].name; + } else if (parents[i].flag == PARENT_CLK_EXTERNAL) { + ret = of_property_match_string(np, "clock-names", + parents[i].name); + if (ret < 0) + strncpy(parents[i].name, + "dummy_name", MAX_NAME_LEN); + parent_list[i] = parents[i].name; + } else { + strcat(parents[i].name, + clk_type_postfix[clk_nodes[parents[i].flag - 1]. + type]); + parent_list[i] = parents[i].name; + } + } + + *num_parents = total_parents; + return 0; +} + +/** + * zynqmp_register_clk_topology: Register clock topology + * @clk_id: Clock Index + * @clk_name: Clock Name + * @num_parents: Total number of parents + * @parent_names: List of parents name + * + * Return: 0: Success + * Error code: Failure + */ +static struct clk *zynqmp_register_clk_topology(int clk_id, char *clk_name, + int num_parents, + const char **parent_names) +{ + int j, ret; + u32 num_nodes, mult, div; + char *clk_out = NULL; + struct clock_topology *nodes; + struct clk *clk = NULL; + + nodes = clock[clk_id].node; + num_nodes = clock[clk_id].num_nodes; + + for (j = 0; j < num_nodes; j++) { + if (j != (num_nodes - 1)) { + clk_out = kasprintf(GFP_KERNEL, "%s%s", clk_name, + clk_type_postfix[nodes[j].type]); + } else { + clk_out = kasprintf(GFP_KERNEL, "%s", clk_name); + } + + switch (nodes[j].type) { + case TYPE_MUX: + clk = zynqmp_clk_register_mux(NULL, clk_out, + clk_id, parent_names, + num_parents, + nodes[j].flag, + nodes[j].type_flag); + break; + case TYPE_PLL: + clk = clk_register_zynqmp_pll(clk_out, clk_id, + parent_names, 1, + nodes[j].flag); + break; + case TYPE_FIXEDFACTOR: + ret = zynqmp_pm_clock_get_fixedfactor_params(clk_id, + &mult, + &div); + clk = clk_register_fixed_factor(NULL, clk_out, + parent_names[0], + nodes[j].flag, mult, + div); + break; + case TYPE_DIV1: + case TYPE_DIV2: + clk = zynqmp_clk_register_divider(NULL, clk_out, clk_id, + nodes[j].type, + parent_names, 1, + nodes[j].flag, + nodes[j].type_flag); + break; + case TYPE_GATE: + clk = zynqmp_clk_register_gate(NULL, clk_out, clk_id, + parent_names, 1, + nodes[j].flag, + nodes[j].type_flag); + break; + default: + pr_err("%s() Unknown topology for %s\n", + __func__, clk_out); + break; + } + if (IS_ERR(clk)) + pr_warn_once("%s() %s register fail with %ld\n", + __func__, clk_name, PTR_ERR(clk)); + + parent_names[0] = clk_out; + } + kfree(clk_out); + return clk; +} + +/** + * zynqmp_register_clocks: Register clocks + * @np: Device node + * + * Return: 0: Success + * Error code: failure + */ +static int zynqmp_register_clocks(struct device_node *np) +{ + int ret; + u32 i, total_parents = 0, type = 0; + const char *parent_names[MAX_PARENT]; + + for (i = 0; i < clock_max_idx; i++) { + char clk_name[MAX_NAME_LEN]; + + /* get clock name, continue to next clock if name not found */ + if (zynqmp_get_clock_name(i, clk_name)) + continue; + + /* Check if clock is valid and output clock. + * Do not regiter invalid or external clock. + */ + ret = get_clock_type(i, &type); + if (ret || type != CLK_TYPE_OUTPUT) + continue; + + /* Get parents of clock*/ + if (get_parent_list(np, i, parent_names, &total_parents)) { + WARN_ONCE(1, "No parents found for %s\n", + clock[i].clk_name); + continue; + } + + zynqmp_clks[i] = zynqmp_register_clk_topology(i, clk_name, + total_parents, + parent_names); + + /* Enable clock if init_enable flag is 1 */ + if (clock[i].init_enable) + clk_prepare_enable(zynqmp_clks[i]); + } + + for (i = 0; i < clock_max_idx; i++) { + if (IS_ERR(zynqmp_clks[i])) { + pr_err("Zynq Ultrascale+ MPSoC clk %s: register failed with %ld\n", + clock[i].clk_name, PTR_ERR(zynqmp_clks[i])); + WARN_ON(1); + } + } + return 0; +} + +/** + * zynqmp_get_clock_info - Get clock information from firmware using PM_API + */ +static void zynqmp_get_clock_info(void) +{ + int i, ret; + u32 attr, type = 0; + + memset(clock, 0, sizeof(clock)); + for (i = 0; i < MAX_CLOCK; i++) { + zynqmp_pm_clock_get_name(i, clock[i].clk_name); + if (!strncmp(clock[i].clk_name, END_OF_CLK_NAME, + MAX_NAME_LEN)) { + clock_max_idx = i; + break; + } else if (!strncmp(clock[i].clk_name, RESERVED_CLK_NAME, + MAX_NAME_LEN)) { + continue; + } + + ret = zynqmp_pm_clock_get_attributes(i, &attr); + if (ret) + continue; + + clock[i].valid = attr & CLK_VALID_MASK; + clock[i].init_enable = !!(attr & CLK_INIT_ENABLE_MASK); + clock[i].type = attr >> CLK_TYPE_SHIFT ? CLK_TYPE_EXTERNAL : + CLK_TYPE_OUTPUT; + } + + /* Get topology of all clock */ + for (i = 0; i < clock_max_idx; i++) { + ret = get_clock_type(i, &type); + if (ret || type != CLK_TYPE_OUTPUT) + continue; + + ret = clock_get_topology(i, clock[i].node, &clock[i].num_nodes); + if (ret) + continue; + + ret = clock_get_parents(i, clock[i].parent, + &clock[i].num_parents); + if (ret) + continue; + } +} + +/** + * zynqmp_clk_setup - Setup the clock framework and register clocks + * @np: Device node + */ +static void __init zynqmp_clk_setup(struct device_node *np) +{ + int idx; + + idx = of_property_match_string(np, "clock-names", "pss_ref_clk"); + if (idx < 0) { + pr_err("pss_ref_clk not provided\n"); + return; + } + idx = of_property_match_string(np, "clock-names", "video_clk"); + if (idx < 0) { + pr_err("video_clk not provided\n"); + return; + } + idx = of_property_match_string(np, "clock-names", "pss_alt_ref_clk"); + if (idx < 0) { + pr_err("pss_alt_ref_clk not provided\n"); + return; + } + idx = of_property_match_string(np, "clock-names", "aux_ref_clk"); + if (idx < 0) { + pr_err("aux_ref_clk not provided\n"); + return; + } + idx = of_property_match_string(np, "clock-names", "gt_crx_ref_clk"); + if (idx < 0) { + pr_err("aux_ref_clk not provided\n"); + return; + } + + zynqmp_get_clock_info(); + zynqmp_register_clocks(np); + + zynqmp_clk_data.clks = zynqmp_clks; + zynqmp_clk_data.clk_num = clock_max_idx; + of_clk_add_provider(np, of_clk_src_onecell_get, &zynqmp_clk_data); +} + +/** + * zynqmp_clock_init - Initialize zynqmp clocks + * + * Return: 0 always + */ +static int __init zynqmp_clock_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp-clkc"); + if (!np) { + pr_err("%s: clkc node not found\n", __func__); + of_node_put(np); + return 0; + } + + eemi_ops = get_eemi_ops(); + if (!eemi_ops || !eemi_ops->query_data) { + pr_err("%s: clk data not found\n", __func__); + of_node_put(np); + return 0; + } + + zynqmp_clk_setup(np); + + return 0; +} +arch_initcall(zynqmp_clock_init); diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c new file mode 100644 index 0000000..1a1473c --- /dev/null +++ b/drivers/clk/zynqmp/divider.c @@ -0,0 +1,239 @@ +/* + * Zynq UltraScale+ MPSoC Divider support + * + * Copyright (C) 2016-2017 Xilinx + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Adjustable divider clock implementation + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clk/zynqmp.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/log2.h> + +/* + * DOC: basic adjustable divider clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is adjustable. clk->rate = ceiling(parent->rate / divisor) + * parent - fixed parent. No clk_set_parent support + */ + +#define to_zynqmp_clk_divider(_hw) \ + container_of(_hw, struct zynqmp_clk_divider, hw) + +/** + * struct zynqmp_clk_divider - adjustable divider clock + * + * @hw: handle between common and hardware-specific interfaces + * @flags: Hardware specific flags + * @clk_id: Id of clock + * @div_type: divisor type (TYPE_DIV1 or TYPE_DIV2) + */ +struct zynqmp_clk_divider { + struct clk_hw hw; + u8 flags; + u32 clk_id; + u32 div_type; +}; + +static int zynqmp_divider_get_val(unsigned long parent_rate, unsigned long rate) +{ + return DIV_ROUND_UP_ULL((u64)parent_rate, rate); +} + +static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = divider->clk_id; + u32 div_type = divider->div_type; + u32 div, value; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_getdivider) + return -ENXIO; + + ret = eemi_ops->clock_getdivider(clk_id, &div); + + if (ret) + pr_warn_once("%s() get divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + if (div_type == TYPE_DIV1) + value = div & 0xFFFF; + else + value = (div >> 16) & 0xFFFF; + + return zynqmp_divider_get_val((u64)parent_rate, value); +} + +static long zynqmp_clk_divider_round_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long *prate) +{ + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = divider->clk_id; + u32 div_type = divider->div_type; + u32 bestdiv; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_getdivider) + return -ENXIO; + + /* if read only, just return current value */ + if (divider->flags & CLK_DIVIDER_READ_ONLY) { + ret = eemi_ops->clock_getdivider(clk_id, &bestdiv); + + if (ret) + pr_warn_once("%s() get divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + if (div_type == TYPE_DIV1) + bestdiv = bestdiv & 0xFFFF; + else + bestdiv = (bestdiv >> 16) & 0xFFFF; + + return DIV_ROUND_UP_ULL((u64)*prate, bestdiv); + } + + bestdiv = zynqmp_divider_get_val(*prate, rate); + + if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) && + ((clk_hw_get_flags(hw) & CLK_FRAC))) + bestdiv = rate % *prate ? 1 : bestdiv; + *prate = rate * bestdiv; + + return rate; +} + +/** + * zynqmp_clk_divider_set_rate - Set rate of divider clock + * @hw: handle between common and hardware-specific interfaces + * @rate: rate of clock to be set + * @parent_rate: rate of parent clock + * + * Return: 0 always + */ +static int zynqmp_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = divider->clk_id; + u32 div_type = divider->div_type; + u32 value, div; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_setdivider) + return -ENXIO; + + value = zynqmp_divider_get_val(parent_rate, rate); + if (div_type == TYPE_DIV1) { + div = value & 0xFFFF; + div |= ((u16)-1) << 16; + } else { + div = ((u16)-1); + div |= value << 16; + } + + ret = eemi_ops->clock_setdivider(clk_id, div); + + if (ret) + pr_warn_once("%s() set divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return 0; +} + +static const struct clk_ops zynqmp_clk_divider_ops = { + .recalc_rate = zynqmp_clk_divider_recalc_rate, + .round_rate = zynqmp_clk_divider_round_rate, + .set_rate = zynqmp_clk_divider_set_rate, +}; + +/** + * _register_divider - register a divider clock + * @dev: device registering this clock + * @name: name of this clock + * @clk_id: Id of clock + * @div_type: Type of divisor + * @parents: name of clock's parents + * @num_parents: number of parents + * @flags: framework-specific flags + * @clk_divider_flags: divider-specific flags for this clock + * + * Return: handle to registered clock divider + */ +static struct clk *_register_divider(struct device *dev, const char *name, + u32 clk_id, u32 div_type, + const char * const *parents, + u8 num_parents, unsigned long flags, + u8 clk_divider_flags) +{ + struct zynqmp_clk_divider *div; + struct clk *clk; + struct clk_init_data init; + + /* allocate the divider */ + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &zynqmp_clk_divider_ops; + init.flags = flags; + init.parent_names = parents; + init.num_parents = num_parents; + + /* struct clk_divider assignments */ + div->flags = clk_divider_flags; + div->hw.init = &init; + div->clk_id = clk_id; + div->div_type = div_type; + + /* register the clock */ + clk = clk_register(dev, &div->hw); + + if (IS_ERR(clk)) + kfree(div); + + return clk; +} + +/** + * zynqmp_clk_register_divider - register a divider clock + * @dev: device registering this clock + * @name: name of this clock + * @clk_id: Id of clock + * @div_type: Type of divisor + * @parents: name of clock's parents + * @num_parents: number of parents + * @flags: framework-specific flags + * @clk_divider_flags: divider-specific flags for this clock + * + * Return: handle to registered clock divider + */ +struct clk *zynqmp_clk_register_divider(struct device *dev, const char *name, + u32 clk_id, u32 div_type, + const char * const *parents, + u8 num_parents, unsigned long flags, + u8 clk_divider_flags) +{ + return _register_divider(dev, name, clk_id, div_type, parents, + num_parents, flags, clk_divider_flags); +} +EXPORT_SYMBOL_GPL(zynqmp_clk_register_divider); diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c new file mode 100644 index 0000000..75def21 --- /dev/null +++ b/drivers/clk/zynqmp/pll.c @@ -0,0 +1,384 @@ +/* + * Zynq UltraScale+ MPSoC PLL driver + * + * Copyright (C) 2016-2017 Xilinx + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <linux/clk.h> +#include <linux/clk/zynqmp.h> +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> + +/** + * struct zynqmp_pll - Structure for PLL clock + * @hw: Handle between common and hardware-specific interfaces + * @clk_id: PLL clock ID + */ +struct zynqmp_pll { + struct clk_hw hw; + u32 clk_id; +}; + +#define to_zynqmp_pll(_hw) container_of(_hw, struct zynqmp_pll, hw) + +/* Register bitfield defines */ +#define PLLCTRL_FBDIV_MASK 0x7f00 +#define PLLCTRL_FBDIV_SHIFT 8 +#define PLLCTRL_BP_MASK BIT(3) +#define PLLCTRL_DIV2_MASK BIT(16) +#define PLLCTRL_RESET_MASK 1 +#define PLLCTRL_RESET_VAL 1 +#define PLL_STATUS_LOCKED 1 +#define PLLCTRL_RESET_SHIFT 0 +#define PLLCTRL_DIV2_SHIFT 16 + +#define PLL_FBDIV_MIN 25 +#define PLL_FBDIV_MAX 125 + +#define PS_PLL_VCO_MIN 1500000000 +#define PS_PLL_VCO_MAX 3000000000UL + +enum pll_mode { + PLL_MODE_INT, + PLL_MODE_FRAC, +}; + +#define FRAC_OFFSET 0x8 +#define PLLFCFG_FRAC_EN BIT(31) +#define FRAC_DIV 0x10000 /* 2^16 */ + +/** + * pll_get_mode - Get mode of PLL + * @hw: Handle between common and hardware-specific interfaces + * + * Return: Mode of PLL + */ +static inline enum pll_mode pll_get_mode(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->ioctl) + return -ENXIO; + + ret = eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_MODE, clk_id, 0, + ret_payload); + if (ret) + pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return ret_payload[1]; +} + +/** + * pll_set_mode - Set the PLL mode + * @hw: Handle between common and hardware-specific interfaces + * @on: Flag to determine the mode + */ +static inline void pll_set_mode(struct clk_hw *hw, bool on) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + int ret; + u32 mode; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->ioctl) { + pr_warn_once("eemi_ops not found\n"); + return; + } + + if (on) + mode = PLL_MODE_FRAC; + else + mode = PLL_MODE_INT; + + ret = eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_MODE, clk_id, mode, NULL); + if (ret) + pr_warn_once("%s() PLL set frac mode failed for %s, ret = %d\n", + __func__, clk_name, ret); +} + +/** + * zynqmp_pll_round_rate - Round a clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @rate: Desired clock frequency + * @prate: Clock frequency of parent clock + * + * Return: Frequency closest to @rate the hardware can generate + */ +static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + u32 fbdiv; + long rate_div, f; + + /* Enable the fractional mode if needed */ + rate_div = ((rate * FRAC_DIV) / *prate); + f = rate_div % FRAC_DIV; + pll_set_mode(hw, !!f); + + if (pll_get_mode(hw) == PLL_MODE_FRAC) { + if (rate > PS_PLL_VCO_MAX) { + fbdiv = rate / PS_PLL_VCO_MAX; + rate = rate / (fbdiv + 1); + } + if (rate < PS_PLL_VCO_MIN) { + fbdiv = DIV_ROUND_UP(PS_PLL_VCO_MIN, rate); + rate = rate * fbdiv; + } + return rate; + } + + fbdiv = DIV_ROUND_CLOSEST(rate, *prate); + fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX); + return *prate * fbdiv; +} + +/** + * zynqmp_pll_recalc_rate - Recalculate clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @parent_rate: Clock frequency of parent clock + * Return: Current clock frequency + */ +static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + u32 fbdiv, data; + unsigned long rate, frac; + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_getdivider) + return 0; + + /* + * makes probably sense to redundantly save fbdiv in the struct + * zynqmp_pll to save the IO access. + */ + ret = eemi_ops->clock_getdivider(clk_id, &fbdiv); + if (ret) + pr_warn_once("%s() get divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + rate = parent_rate * fbdiv; + if (pll_get_mode(hw) == PLL_MODE_FRAC) { + eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_DATA, clk_id, 0, + ret_payload); + data = ret_payload[1]; + frac = (parent_rate * data) / FRAC_DIV; + rate = rate + frac; + } + + return rate; +} + +/** + * zynqmp_pll_set_rate - Set rate of PLL + * @hw: Handle between common and hardware-specific interfaces + * @rate: Frequency of clock to be set + * @parent_rate: Clock frequency of parent clock + */ +static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + u32 clk_id = clk->clk_id; + const char *clk_name = clk_hw_get_name(hw); + u32 fbdiv, data; + long rate_div, frac, m, f; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_setdivider) + return -ENXIO; + + if (pll_get_mode(hw) == PLL_MODE_FRAC) { + unsigned int children; + + /* + * We're running on a ZynqMP compatible machine, make sure the + * VPLL only has one child. + */ + children = clk_get_children("vpll"); + + /* Account for vpll_to_lpd and dp_video_ref */ + if (children > 2) + WARN(1, "Two devices are using vpll which is forbidden\n"); + + rate_div = ((rate * FRAC_DIV) / parent_rate); + m = rate_div / FRAC_DIV; + f = rate_div % FRAC_DIV; + m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX)); + rate = parent_rate * m; + frac = (parent_rate * f) / FRAC_DIV; + + ret = eemi_ops->clock_setdivider(clk_id, m); + if (ret) + pr_warn_once("%s() set divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + data = (FRAC_DIV * f) / FRAC_DIV; + eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_DATA, clk_id, data, NULL); + + return (rate + frac); + } + + fbdiv = DIV_ROUND_CLOSEST(rate, parent_rate); + fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX); + ret = eemi_ops->clock_setdivider(clk_id, fbdiv); + if (ret) + pr_warn_once("%s() set divider failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return parent_rate * fbdiv; +} + +/** + * zynqmp_pll_is_enabled - Check if a clock is enabled + * @hw: Handle between common and hardware-specific interfaces + * + * Return: 1 if the clock is enabled, 0 otherwise + */ +static int zynqmp_pll_is_enabled(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = clk->clk_id; + unsigned int state; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_getstate) + return 0; + + ret = eemi_ops->clock_getstate(clk_id, &state); + if (ret) + pr_warn_once("%s() clock get state failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return state ? 1 : 0; +} + +/** + * zynqmp_pll_enable - Enable clock + * @hw: Handle between common and hardware-specific interfaces + * + * Return: 0 always + */ +static int zynqmp_pll_enable(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = clk->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_enable) + return 0; + + if (zynqmp_pll_is_enabled(hw)) + return 0; + + pr_info("PLL: enable\n"); + + ret = eemi_ops->clock_enable(clk_id); + if (ret) + pr_warn_once("%s() clock enable failed for %s, ret = %d\n", + __func__, clk_name, ret); + + return 0; +} + +/** + * zynqmp_pll_disable - Disable clock + * @hw: Handle between common and hardware-specific interfaces + * + */ +static void zynqmp_pll_disable(struct clk_hw *hw) +{ + struct zynqmp_pll *clk = to_zynqmp_pll(hw); + const char *clk_name = clk_hw_get_name(hw); + u32 clk_id = clk->clk_id; + int ret; + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->clock_disable) + return; + + if (!zynqmp_pll_is_enabled(hw)) + return; + + pr_info("PLL: shutdown\n"); + + ret = eemi_ops->clock_disable(clk_id); + if (ret) + pr_warn_once("%s() clock disable failed for %s, ret = %d\n", + __func__, clk_name, ret); +} + +static const struct clk_ops zynqmp_pll_ops = { + .enable = zynqmp_pll_enable, + .disable = zynqmp_pll_disable, + .is_enabled = zynqmp_pll_is_enabled, + .round_rate = zynqmp_pll_round_rate, + .recalc_rate = zynqmp_pll_recalc_rate, + .set_rate = zynqmp_pll_set_rate, +}; + +/** + * clk_register_zynqmp_pll - Register PLL with the clock framework + * @name: PLL name + * @flag: PLL flags + * @parents: Parent clock names + * @num_parents:Number of parents + * @pll_ctrl: Pointer to PLL control register + * @pll_status: Pointer to PLL status register + * @lock_index: Bit index to this PLL's lock status bit in @pll_status + * + * Return: Handle to the registered clock + */ +struct clk *clk_register_zynqmp_pll(const char *name, u32 clk_id, + const char * const *parents, + u8 num_parents, unsigned long flag) +{ + struct zynqmp_pll *pll; + struct clk *clk; + struct clk_init_data init; + int status; + + init.name = name; + init.ops = &zynqmp_pll_ops; + init.flags = flag; + init.parent_names = parents; + init.num_parents = num_parents; + + pll = kmalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + /* Populate the struct */ + pll->hw.init = &init; + pll->clk_id = clk_id; + + clk = clk_register(NULL, &pll->hw); + if (WARN_ON(IS_ERR(clk))) + kfree(pll); + + status = clk_set_rate_range(clk, PS_PLL_VCO_MIN, PS_PLL_VCO_MAX); + if (status < 0) + pr_err("%s:ERROR clk_set_rate_range failed %d\n", name, status); + + return clk; +} diff --git a/include/linux/clk/zynqmp.h b/include/linux/clk/zynqmp.h new file mode 100644 index 0000000..024ebf8 --- /dev/null +++ b/include/linux/clk/zynqmp.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2016-2017 Xilinx + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LINUX_CLK_ZYNQMP_H_ +#define __LINUX_CLK_ZYNQMP_H_ + +#include <linux/spinlock.h> +#include <linux/firmware/xilinx/zynqmp/firmware.h> + +#define CLK_FRAC BIT(13) /* has a fractional parent */ + +struct device; + +struct clk *clk_register_zynqmp_pll(const char *name, u32 clk_id, + const char * const *parent, u8 num_parents, + unsigned long flag); + +struct clk *zynqmp_clk_register_gate(struct device *dev, const char *name, + u32 clk_id, + const char * const *parent_name, + u8 num_parents, unsigned long flags, + u8 clk_gate_flags); + +struct clk *zynqmp_clk_register_divider(struct device *dev, const char *name, + u32 clk_id, u32 div_type, + const char * const *parent_name, + u8 num_parents, + unsigned long flags, + u8 clk_divider_flags); + +struct clk *zynqmp_clk_register_mux(struct device *dev, const char *name, + u32 clk_id, + const char **parent_names, + u8 num_parents, unsigned long flags, + u8 clk_mux_flags); + +struct clk *zynqmp_clk_register_mux_table(struct device *dev, const char *name, + u32 clk_id, + const char * const *parent_names, + u8 num_parents, unsigned long flags, + u8 clk_mux_flags); + +#endif