Message ID | 1513844415-11427-4-git-send-email-leo.yan@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thu, Dec 21, 2017 at 04:20:12PM +0800, Leo Yan wrote: > After kernel panic happens, coresight has many useful info can be used > for analysis. For example, the trace info from ETB RAM can be used to > check the CPU execution flows before crash. So we can save the tracing > data from sink devices, and rely on kdump to save DDR content and uses > "crash" tool to extract coresight dumping from vmcore file. > > This patch is to add a simple framework to support panic dump > functionality; it registers panic notifier, and provide the general APIs > {coresight_kdump_add|coresight_kdump_del} as helper functions so any > coresight device can add itself into dump list or delete as needed. > > This driver provides helper function coresight_kdump_update() to update > the dump buffer base address and buffer size. This function can be used > by coresight driver, e.g. it can be used to save ETM meta data info at > runtime and these info can be prepared pre panic happening. > > When kernel panic happens, the notifier iterates dump list and calls > callback function to dump device specific info. The panic dump is > mainly used to dump trace data so we can get to know the execution flow > before the panic happens. > > Signed-off-by: Leo Yan <leo.yan@linaro.org> > --- > drivers/hwtracing/coresight/Kconfig | 9 ++ > drivers/hwtracing/coresight/Makefile | 1 + > .../hwtracing/coresight/coresight-panic-kdump.c | 154 +++++++++++++++++++++ > drivers/hwtracing/coresight/coresight-priv.h | 13 ++ > include/linux/coresight.h | 7 + > 5 files changed, 184 insertions(+) > create mode 100644 drivers/hwtracing/coresight/coresight-panic-kdump.c > > diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig > index ef9cb3c..4812529 100644 > --- a/drivers/hwtracing/coresight/Kconfig > +++ b/drivers/hwtracing/coresight/Kconfig > @@ -103,4 +103,13 @@ config CORESIGHT_CPU_DEBUG > properly, please refer Documentation/trace/coresight-cpu-debug.txt > for detailed description and the example for usage. > > +config CORESIGHT_PANIC_KDUMP > + bool "CoreSight Panic Kdump driver" > + depends on ARM || ARM64 At this time only ETMv4 supports the feature, so it is only ARM64. > + help > + This driver provides panic kdump functionality for CoreSight > + devices. When a kernel panic happen a device supplied callback function > + is used to save trace data to memory. From there we rely on kdump to extract > + the trace data from kernel dump file. > + > endif > diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile > index 61db9dd..946fe19 100644 > --- a/drivers/hwtracing/coresight/Makefile > +++ b/drivers/hwtracing/coresight/Makefile > @@ -18,3 +18,4 @@ obj-$(CONFIG_CORESIGHT_SOURCE_ETM4X) += coresight-etm4x.o \ > obj-$(CONFIG_CORESIGHT_DYNAMIC_REPLICATOR) += coresight-dynamic-replicator.o > obj-$(CONFIG_CORESIGHT_STM) += coresight-stm.o > obj-$(CONFIG_CORESIGHT_CPU_DEBUG) += coresight-cpu-debug.o > +obj-$(CONFIG_CORESIGHT_PANIC_KDUMP) += coresight-panic-kdump.o > diff --git a/drivers/hwtracing/coresight/coresight-panic-kdump.c b/drivers/hwtracing/coresight/coresight-panic-kdump.c > new file mode 100644 > index 0000000..c21d20b > --- /dev/null > +++ b/drivers/hwtracing/coresight/coresight-panic-kdump.c > @@ -0,0 +1,154 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2017 Linaro Limited. > +#include <linux/coresight.h> > +#include <linux/coresight-pmu.h> > +#include <linux/cpumask.h> > +#include <linux/device.h> > +#include <linux/init.h> > +#include <linux/list.h> > +#include <linux/mm.h> > +#include <linux/perf_event.h> > +#include <linux/slab.h> > +#include <linux/types.h> > + > +#include "coresight-priv.h" > + > +typedef void (*coresight_cb_t)(void *data); > + > +/** > + * struct coresight_kdump_node - Node information for dump > + * @cpu: The cpu this node is affined to. > + * @csdev: Handler for coresight device. > + * @buf: Pointer for dump buffer. > + * @buf_size: Length of dump buffer. > + * @list: Hook to the list. > + */ > +struct coresight_kdump_node { > + int cpu; > + struct coresight_device *csdev; > + char *buf; > + unsigned int buf_size; > + struct list_head list; > +}; > + > +static DEFINE_SPINLOCK(coresight_kdump_lock); > +static LIST_HEAD(coresight_kdump_list); > +static struct notifier_block coresight_kdump_nb; > + > +int coresight_kdump_update(struct coresight_device *csdev, char *buf, > + unsigned int buf_size) > +{ > + struct coresight_kdump_node *node = csdev->dump_node; > + > + if (!node) { > + dev_err(&csdev->dev, "Failed to update dump node.\n"); > + return -EINVAL; > + } > + > + node->buf = buf; > + node->buf_size = buf_size; > + return 0; > +} > + > +int coresight_kdump_add(struct coresight_device *csdev, int cpu) > +{ > + struct coresight_kdump_node *node; > + unsigned long flags; > + > + node = kzalloc(sizeof(*node), GFP_KERNEL); > + if (!node) > + return -ENOMEM; > + > + csdev->dump_node = (void *)node; > + node->cpu = cpu; > + node->csdev = csdev; > + > + spin_lock_irqsave(&coresight_kdump_lock, flags); > + list_add_tail(&node->list, &coresight_kdump_list); > + spin_unlock_irqrestore(&coresight_kdump_lock, flags); > + return 0; > +} > + > +void coresight_kdump_del(struct coresight_device *csdev) > +{ > + struct coresight_kdump_node *node, *next; > + unsigned long flags; > + > + spin_lock_irqsave(&coresight_kdump_lock, flags); > + list_for_each_entry_safe(node, next, &coresight_kdump_list, list) { > + if (node->csdev == csdev) { > + list_del(&node->list); > + kfree(node); > + break; > + } > + } > + spin_unlock_irqrestore(&coresight_kdump_lock, flags); > +} > + > +static coresight_cb_t > +coresight_kdump_get_cb(struct coresight_device *csdev) > +{ > + coresight_cb_t cb = NULL; > + > + switch (csdev->type) { > + case CORESIGHT_DEV_TYPE_SINK: > + case CORESIGHT_DEV_TYPE_LINKSINK: > + cb = sink_ops(csdev)->panic_cb; > + break; > + case CORESIGHT_DEV_TYPE_SOURCE: > + cb = source_ops(csdev)->panic_cb; > + break; > + case CORESIGHT_DEV_TYPE_LINK: > + cb = link_ops(csdev)->panic_cb; > + break; I don't see why we need a callback for link devices - didn't I raised that question before? And I've been thinking further about this. The way we call the panic callbacks won't work. When a panic is triggered there might be trace data in the CS network that hasn't made it to the sink yet and calling the panic callbacks for sinks will lead to a loss of data. That is why, when accessing from both sysFS and perf, the current implementation takes great care to stop the tracers first and then deal with the sink. To fix this I suggest to call the panic callbacks only for sources. What happens there will depend on what interface is used (sysFS or perf) - look at what is currently done to get a better understanding. > + default: > + dev_info(&csdev->dev, "Unsupport panic dump\n"); I would not bother with the dev_info()... > + break; > + } > + > + return cb; > +} > + > +/** > + * coresight_kdump_notify - Invoke panic dump callbacks, this is > + * the main function to fulfill the panic dump. It distinguishs > + * to two types: one is pre panic dump which the callback function > + * handler is NULL and coresight drivers can use function > + * coresight_kdump_update() to directly update dump buffer base > + * address and buffer size, for this case this function does nothing > + * and directly bail out; another case is for post panic dump so > + * invoke callback on alive CPU. Now that pre and post processing are gone the description above doesn't match what the function is doing. > + * > + * Returns: 0 on success. > + */ > +static int coresight_kdump_notify(struct notifier_block *nb, > + unsigned long mode, void *_unused) > +{ > + struct coresight_kdump_node *node; > + struct coresight_device *csdev; > + coresight_cb_t cb; > + unsigned long flags; > + > + spin_lock_irqsave(&coresight_kdump_lock, flags); > + > + list_for_each_entry(node, &coresight_kdump_list, list) { > + csdev = node->csdev; > + cb = coresight_kdump_get_cb(csdev); > + if (cb) > + cb(csdev); > + } > + > + spin_unlock_irqrestore(&coresight_kdump_lock, flags); > + return 0; > +} > + > +static int __init coresight_kdump_init(void) > +{ > + int ret; > + > + coresight_kdump_nb.notifier_call = coresight_kdump_notify; > + ret = atomic_notifier_chain_register(&panic_notifier_list, > + &coresight_kdump_nb); > + return ret; > +} > +late_initcall(coresight_kdump_init); > diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h > index f1d0e21d..937750e 100644 > --- a/drivers/hwtracing/coresight/coresight-priv.h > +++ b/drivers/hwtracing/coresight/coresight-priv.h > @@ -151,4 +151,17 @@ static inline int etm_readl_cp14(u32 off, unsigned int *val) { return 0; } > static inline int etm_writel_cp14(u32 off, u32 val) { return 0; } > #endif > > +#ifdef CONFIG_CORESIGHT_PANIC_KDUMP > +extern int coresight_kdump_add(struct coresight_device *csdev, int cpu); > +extern void coresight_kdump_del(struct coresight_device *csdev); > +extern int coresight_kdump_update(struct coresight_device *csdev, > + char *buf, unsigned int buf_size); > +#else > +static inline int > +coresight_kdump_add(struct coresight_device *csdev, int cpu) { return 0; } > +static inline void coresight_kdump_del(struct coresight_device *csdev) {} > +static inline int coresight_kdump_update(struct coresight_device *csdev, > + char *buf, unsigned int buf_size) { return 0; } static inline int coresight_kdump_update(struct coresight_device *csdev, char *buf, unsigned int buf_size) { return 0; } > +#endif > + > #endif > diff --git a/include/linux/coresight.h b/include/linux/coresight.h > index d950dad..43e40fa 100644 > --- a/include/linux/coresight.h > +++ b/include/linux/coresight.h > @@ -171,6 +171,7 @@ struct coresight_device { > bool orphan; > bool enable; /* true only if configured as part of a path */ > bool activated; /* true only if a sink is part of a path */ > + void *dump_node; Please add a description for this entry. > }; > > #define to_coresight_device(d) container_of(d, struct coresight_device, dev) > @@ -189,6 +190,7 @@ struct coresight_device { > * @set_buffer: initialises buffer mechanic before a trace session. > * @reset_buffer: finalises buffer mechanic after a trace session. > * @update_buffer: update buffer pointers after a trace session. > + * @panic_cb: hook function for panic notifier. > */ > struct coresight_ops_sink { > int (*enable)(struct coresight_device *csdev, u32 mode); > @@ -205,6 +207,7 @@ struct coresight_ops_sink { > void (*update_buffer)(struct coresight_device *csdev, > struct perf_output_handle *handle, > void *sink_config); > + void (*panic_cb)(void *data); > }; > > /** > @@ -212,10 +215,12 @@ struct coresight_ops_sink { > * Operations available for links. > * @enable: enables flow between iport and oport. > * @disable: disables flow between iport and oport. > + * @panic_cb: hook function for panic notifier. > */ > struct coresight_ops_link { > int (*enable)(struct coresight_device *csdev, int iport, int oport); > void (*disable)(struct coresight_device *csdev, int iport, int oport); > + void (*panic_cb)(void *data); > }; > > /** > @@ -227,6 +232,7 @@ struct coresight_ops_link { > * to the HW. > * @enable: enables tracing for a source. > * @disable: disables tracing for a source. > + * @panic_cb: hook function for panic notifier. > */ > struct coresight_ops_source { > int (*cpu_id)(struct coresight_device *csdev); > @@ -235,6 +241,7 @@ struct coresight_ops_source { > struct perf_event *event, u32 mode); > void (*disable)(struct coresight_device *csdev, > struct perf_event *event); > + void (*panic_cb)(void *data); > }; > > struct coresight_ops { > -- > 2.7.4 >
On Tue, Jan 09, 2018 at 11:41:26AM -0700, Mathieu Poirier wrote: > On Thu, Dec 21, 2017 at 04:20:12PM +0800, Leo Yan wrote: > > After kernel panic happens, coresight has many useful info can be used > > for analysis. For example, the trace info from ETB RAM can be used to > > check the CPU execution flows before crash. So we can save the tracing > > data from sink devices, and rely on kdump to save DDR content and uses > > "crash" tool to extract coresight dumping from vmcore file. > > > > This patch is to add a simple framework to support panic dump > > functionality; it registers panic notifier, and provide the general APIs > > {coresight_kdump_add|coresight_kdump_del} as helper functions so any > > coresight device can add itself into dump list or delete as needed. > > > > This driver provides helper function coresight_kdump_update() to update > > the dump buffer base address and buffer size. This function can be used > > by coresight driver, e.g. it can be used to save ETM meta data info at > > runtime and these info can be prepared pre panic happening. > > > > When kernel panic happens, the notifier iterates dump list and calls > > callback function to dump device specific info. The panic dump is > > mainly used to dump trace data so we can get to know the execution flow > > before the panic happens. > > > > Signed-off-by: Leo Yan <leo.yan@linaro.org> > > --- > > drivers/hwtracing/coresight/Kconfig | 9 ++ > > drivers/hwtracing/coresight/Makefile | 1 + > > .../hwtracing/coresight/coresight-panic-kdump.c | 154 +++++++++++++++++++++ > > drivers/hwtracing/coresight/coresight-priv.h | 13 ++ > > include/linux/coresight.h | 7 + > > 5 files changed, 184 insertions(+) > > create mode 100644 drivers/hwtracing/coresight/coresight-panic-kdump.c > > > > diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig > > index ef9cb3c..4812529 100644 > > --- a/drivers/hwtracing/coresight/Kconfig > > +++ b/drivers/hwtracing/coresight/Kconfig > > @@ -103,4 +103,13 @@ config CORESIGHT_CPU_DEBUG > > properly, please refer Documentation/trace/coresight-cpu-debug.txt > > for detailed description and the example for usage. > > > > +config CORESIGHT_PANIC_KDUMP > > + bool "CoreSight Panic Kdump driver" > > + depends on ARM || ARM64 > > At this time only ETMv4 supports the feature, so it is only ARM64. Thanks for reviewing, Mathieu. Will change to only for ARM64. > > + help > > + This driver provides panic kdump functionality for CoreSight > > + devices. When a kernel panic happen a device supplied callback function > > + is used to save trace data to memory. From there we rely on kdump to extract > > + the trace data from kernel dump file. > > + > > endif > > diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile > > index 61db9dd..946fe19 100644 > > --- a/drivers/hwtracing/coresight/Makefile > > +++ b/drivers/hwtracing/coresight/Makefile > > @@ -18,3 +18,4 @@ obj-$(CONFIG_CORESIGHT_SOURCE_ETM4X) += coresight-etm4x.o \ > > obj-$(CONFIG_CORESIGHT_DYNAMIC_REPLICATOR) += coresight-dynamic-replicator.o > > obj-$(CONFIG_CORESIGHT_STM) += coresight-stm.o > > obj-$(CONFIG_CORESIGHT_CPU_DEBUG) += coresight-cpu-debug.o > > +obj-$(CONFIG_CORESIGHT_PANIC_KDUMP) += coresight-panic-kdump.o > > diff --git a/drivers/hwtracing/coresight/coresight-panic-kdump.c b/drivers/hwtracing/coresight/coresight-panic-kdump.c > > new file mode 100644 > > index 0000000..c21d20b > > --- /dev/null > > +++ b/drivers/hwtracing/coresight/coresight-panic-kdump.c > > @@ -0,0 +1,154 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +// Copyright (c) 2017 Linaro Limited. > > +#include <linux/coresight.h> > > +#include <linux/coresight-pmu.h> > > +#include <linux/cpumask.h> > > +#include <linux/device.h> > > +#include <linux/init.h> > > +#include <linux/list.h> > > +#include <linux/mm.h> > > +#include <linux/perf_event.h> > > +#include <linux/slab.h> > > +#include <linux/types.h> > > + > > +#include "coresight-priv.h" > > + > > +typedef void (*coresight_cb_t)(void *data); > > + > > +/** > > + * struct coresight_kdump_node - Node information for dump > > + * @cpu: The cpu this node is affined to. > > + * @csdev: Handler for coresight device. > > + * @buf: Pointer for dump buffer. > > + * @buf_size: Length of dump buffer. > > + * @list: Hook to the list. > > + */ > > +struct coresight_kdump_node { > > + int cpu; > > + struct coresight_device *csdev; > > + char *buf; > > + unsigned int buf_size; > > + struct list_head list; > > +}; > > + > > +static DEFINE_SPINLOCK(coresight_kdump_lock); > > +static LIST_HEAD(coresight_kdump_list); > > +static struct notifier_block coresight_kdump_nb; > > + > > +int coresight_kdump_update(struct coresight_device *csdev, char *buf, > > + unsigned int buf_size) > > +{ > > + struct coresight_kdump_node *node = csdev->dump_node; > > + > > + if (!node) { > > + dev_err(&csdev->dev, "Failed to update dump node.\n"); > > + return -EINVAL; > > + } > > + > > + node->buf = buf; > > + node->buf_size = buf_size; > > + return 0; > > +} > > + > > +int coresight_kdump_add(struct coresight_device *csdev, int cpu) > > +{ > > + struct coresight_kdump_node *node; > > + unsigned long flags; > > + > > + node = kzalloc(sizeof(*node), GFP_KERNEL); > > + if (!node) > > + return -ENOMEM; > > + > > + csdev->dump_node = (void *)node; > > + node->cpu = cpu; > > + node->csdev = csdev; > > + > > + spin_lock_irqsave(&coresight_kdump_lock, flags); > > + list_add_tail(&node->list, &coresight_kdump_list); > > + spin_unlock_irqrestore(&coresight_kdump_lock, flags); > > + return 0; > > +} > > + > > +void coresight_kdump_del(struct coresight_device *csdev) > > +{ > > + struct coresight_kdump_node *node, *next; > > + unsigned long flags; > > + > > + spin_lock_irqsave(&coresight_kdump_lock, flags); > > + list_for_each_entry_safe(node, next, &coresight_kdump_list, list) { > > + if (node->csdev == csdev) { > > + list_del(&node->list); > > + kfree(node); > > + break; > > + } > > + } > > + spin_unlock_irqrestore(&coresight_kdump_lock, flags); > > +} > > + > > +static coresight_cb_t > > +coresight_kdump_get_cb(struct coresight_device *csdev) > > +{ > > + coresight_cb_t cb = NULL; > > + > > + switch (csdev->type) { > > + case CORESIGHT_DEV_TYPE_SINK: > > + case CORESIGHT_DEV_TYPE_LINKSINK: > > + cb = sink_ops(csdev)->panic_cb; > > + break; > > + case CORESIGHT_DEV_TYPE_SOURCE: > > + cb = source_ops(csdev)->panic_cb; > > + break; > > + case CORESIGHT_DEV_TYPE_LINK: > > + cb = link_ops(csdev)->panic_cb; > > + break; > > I don't see why we need a callback for link devices - didn't I raised > that question before? Yes, sorry I have not deleted for link devices completely. Will remove it. > And I've been thinking further about this. The way we call the panic callbacks > won't work. When a panic is triggered there might be trace data in the CS network > that hasn't made it to the sink yet and calling the panic callbacks for sinks > will lead to a loss of data. > > That is why, when accessing from both sysFS and perf, the current implementation > takes great care to stop the tracers first and then deal with the sink. To fix > this I suggest to call the panic callbacks only for sources. What happens there > will depend on what interface is used (sysFS or perf) - look at what is > currently done to get a better understanding. Will look into this. If I understand correctly, we need firstly stop tracers and save trace data from sink, right? If so we need use single callback function to disable path and dump data for sink, will study current case and check what's the clean method for kdump. > > + default: > > + dev_info(&csdev->dev, "Unsupport panic dump\n"); > > I would not bother with the dev_info()... Will remove it. > > + break; > > + } > > + > > + return cb; > > +} > > + > > +/** > > + * coresight_kdump_notify - Invoke panic dump callbacks, this is > > + * the main function to fulfill the panic dump. It distinguishs > > + * to two types: one is pre panic dump which the callback function > > + * handler is NULL and coresight drivers can use function > > + * coresight_kdump_update() to directly update dump buffer base > > + * address and buffer size, for this case this function does nothing > > + * and directly bail out; another case is for post panic dump so > > + * invoke callback on alive CPU. > > Now that pre and post processing are gone the description above doesn't match > what the function is doing. Yeah, will remove 'pre' and 'post' to avoid confusion. > > + * > > + * Returns: 0 on success. > > + */ > > +static int coresight_kdump_notify(struct notifier_block *nb, > > + unsigned long mode, void *_unused) > > +{ > > + struct coresight_kdump_node *node; > > + struct coresight_device *csdev; > > + coresight_cb_t cb; > > + unsigned long flags; > > + > > + spin_lock_irqsave(&coresight_kdump_lock, flags); > > + > > + list_for_each_entry(node, &coresight_kdump_list, list) { > > + csdev = node->csdev; > > + cb = coresight_kdump_get_cb(csdev); > > + if (cb) > > + cb(csdev); > > + } > > + > > + spin_unlock_irqrestore(&coresight_kdump_lock, flags); > > + return 0; > > +} > > + > > +static int __init coresight_kdump_init(void) > > +{ > > + int ret; > > + > > + coresight_kdump_nb.notifier_call = coresight_kdump_notify; > > + ret = atomic_notifier_chain_register(&panic_notifier_list, > > + &coresight_kdump_nb); > > + return ret; > > +} > > +late_initcall(coresight_kdump_init); > > diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h > > index f1d0e21d..937750e 100644 > > --- a/drivers/hwtracing/coresight/coresight-priv.h > > +++ b/drivers/hwtracing/coresight/coresight-priv.h > > @@ -151,4 +151,17 @@ static inline int etm_readl_cp14(u32 off, unsigned int *val) { return 0; } > > static inline int etm_writel_cp14(u32 off, u32 val) { return 0; } > > #endif > > > > +#ifdef CONFIG_CORESIGHT_PANIC_KDUMP > > +extern int coresight_kdump_add(struct coresight_device *csdev, int cpu); > > +extern void coresight_kdump_del(struct coresight_device *csdev); > > +extern int coresight_kdump_update(struct coresight_device *csdev, > > + char *buf, unsigned int buf_size); > > +#else > > +static inline int > > +coresight_kdump_add(struct coresight_device *csdev, int cpu) { return 0; } > > +static inline void coresight_kdump_del(struct coresight_device *csdev) {} > > +static inline int coresight_kdump_update(struct coresight_device *csdev, > > + char *buf, unsigned int buf_size) { return 0; } > > static inline int > coresight_kdump_update(struct coresight_device *csdev, char *buf, > unsigned int buf_size) { return 0; } Will fix. > > +#endif > > + > > #endif > > diff --git a/include/linux/coresight.h b/include/linux/coresight.h > > index d950dad..43e40fa 100644 > > --- a/include/linux/coresight.h > > +++ b/include/linux/coresight.h > > @@ -171,6 +171,7 @@ struct coresight_device { > > bool orphan; > > bool enable; /* true only if configured as part of a path */ > > bool activated; /* true only if a sink is part of a path */ > > + void *dump_node; > > Please add a description for this entry. Will do. Thanks, Leo Yan > > }; > > > > #define to_coresight_device(d) container_of(d, struct coresight_device, dev) > > @@ -189,6 +190,7 @@ struct coresight_device { > > * @set_buffer: initialises buffer mechanic before a trace session. > > * @reset_buffer: finalises buffer mechanic after a trace session. > > * @update_buffer: update buffer pointers after a trace session. > > + * @panic_cb: hook function for panic notifier. > > */ > > struct coresight_ops_sink { > > int (*enable)(struct coresight_device *csdev, u32 mode); > > @@ -205,6 +207,7 @@ struct coresight_ops_sink { > > void (*update_buffer)(struct coresight_device *csdev, > > struct perf_output_handle *handle, > > void *sink_config); > > + void (*panic_cb)(void *data); > > }; > > > > /** > > @@ -212,10 +215,12 @@ struct coresight_ops_sink { > > * Operations available for links. > > * @enable: enables flow between iport and oport. > > * @disable: disables flow between iport and oport. > > + * @panic_cb: hook function for panic notifier. > > */ > > struct coresight_ops_link { > > int (*enable)(struct coresight_device *csdev, int iport, int oport); > > void (*disable)(struct coresight_device *csdev, int iport, int oport); > > + void (*panic_cb)(void *data); > > }; > > > > /** > > @@ -227,6 +232,7 @@ struct coresight_ops_link { > > * to the HW. > > * @enable: enables tracing for a source. > > * @disable: disables tracing for a source. > > + * @panic_cb: hook function for panic notifier. > > */ > > struct coresight_ops_source { > > int (*cpu_id)(struct coresight_device *csdev); > > @@ -235,6 +241,7 @@ struct coresight_ops_source { > > struct perf_event *event, u32 mode); > > void (*disable)(struct coresight_device *csdev, > > struct perf_event *event); > > + void (*panic_cb)(void *data); > > }; > > > > struct coresight_ops { > > -- > > 2.7.4 > >
On 9 January 2018 at 22:19, Leo Yan <leo.yan@linaro.org> wrote: > On Tue, Jan 09, 2018 at 11:41:26AM -0700, Mathieu Poirier wrote: >> On Thu, Dec 21, 2017 at 04:20:12PM +0800, Leo Yan wrote: >> > After kernel panic happens, coresight has many useful info can be used >> > for analysis. For example, the trace info from ETB RAM can be used to >> > check the CPU execution flows before crash. So we can save the tracing >> > data from sink devices, and rely on kdump to save DDR content and uses >> > "crash" tool to extract coresight dumping from vmcore file. >> > >> > This patch is to add a simple framework to support panic dump >> > functionality; it registers panic notifier, and provide the general APIs >> > {coresight_kdump_add|coresight_kdump_del} as helper functions so any >> > coresight device can add itself into dump list or delete as needed. >> > >> > This driver provides helper function coresight_kdump_update() to update >> > the dump buffer base address and buffer size. This function can be used >> > by coresight driver, e.g. it can be used to save ETM meta data info at >> > runtime and these info can be prepared pre panic happening. >> > >> > When kernel panic happens, the notifier iterates dump list and calls >> > callback function to dump device specific info. The panic dump is >> > mainly used to dump trace data so we can get to know the execution flow >> > before the panic happens. >> > >> > Signed-off-by: Leo Yan <leo.yan@linaro.org> >> > --- >> > drivers/hwtracing/coresight/Kconfig | 9 ++ >> > drivers/hwtracing/coresight/Makefile | 1 + >> > .../hwtracing/coresight/coresight-panic-kdump.c | 154 +++++++++++++++++++++ >> > drivers/hwtracing/coresight/coresight-priv.h | 13 ++ >> > include/linux/coresight.h | 7 + >> > 5 files changed, 184 insertions(+) >> > create mode 100644 drivers/hwtracing/coresight/coresight-panic-kdump.c >> > >> > diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig >> > index ef9cb3c..4812529 100644 >> > --- a/drivers/hwtracing/coresight/Kconfig >> > +++ b/drivers/hwtracing/coresight/Kconfig >> > @@ -103,4 +103,13 @@ config CORESIGHT_CPU_DEBUG >> > properly, please refer Documentation/trace/coresight-cpu-debug.txt >> > for detailed description and the example for usage. >> > >> > +config CORESIGHT_PANIC_KDUMP >> > + bool "CoreSight Panic Kdump driver" >> > + depends on ARM || ARM64 >> >> At this time only ETMv4 supports the feature, so it is only ARM64. > > Thanks for reviewing, Mathieu. > > Will change to only for ARM64. > >> > + help >> > + This driver provides panic kdump functionality for CoreSight >> > + devices. When a kernel panic happen a device supplied callback function >> > + is used to save trace data to memory. From there we rely on kdump to extract >> > + the trace data from kernel dump file. >> > + >> > endif >> > diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile >> > index 61db9dd..946fe19 100644 >> > --- a/drivers/hwtracing/coresight/Makefile >> > +++ b/drivers/hwtracing/coresight/Makefile >> > @@ -18,3 +18,4 @@ obj-$(CONFIG_CORESIGHT_SOURCE_ETM4X) += coresight-etm4x.o \ >> > obj-$(CONFIG_CORESIGHT_DYNAMIC_REPLICATOR) += coresight-dynamic-replicator.o >> > obj-$(CONFIG_CORESIGHT_STM) += coresight-stm.o >> > obj-$(CONFIG_CORESIGHT_CPU_DEBUG) += coresight-cpu-debug.o >> > +obj-$(CONFIG_CORESIGHT_PANIC_KDUMP) += coresight-panic-kdump.o >> > diff --git a/drivers/hwtracing/coresight/coresight-panic-kdump.c b/drivers/hwtracing/coresight/coresight-panic-kdump.c >> > new file mode 100644 >> > index 0000000..c21d20b >> > --- /dev/null >> > +++ b/drivers/hwtracing/coresight/coresight-panic-kdump.c >> > @@ -0,0 +1,154 @@ >> > +// SPDX-License-Identifier: GPL-2.0 >> > +// Copyright (c) 2017 Linaro Limited. >> > +#include <linux/coresight.h> >> > +#include <linux/coresight-pmu.h> >> > +#include <linux/cpumask.h> >> > +#include <linux/device.h> >> > +#include <linux/init.h> >> > +#include <linux/list.h> >> > +#include <linux/mm.h> >> > +#include <linux/perf_event.h> >> > +#include <linux/slab.h> >> > +#include <linux/types.h> >> > + >> > +#include "coresight-priv.h" >> > + >> > +typedef void (*coresight_cb_t)(void *data); >> > + >> > +/** >> > + * struct coresight_kdump_node - Node information for dump >> > + * @cpu: The cpu this node is affined to. >> > + * @csdev: Handler for coresight device. >> > + * @buf: Pointer for dump buffer. >> > + * @buf_size: Length of dump buffer. >> > + * @list: Hook to the list. >> > + */ >> > +struct coresight_kdump_node { >> > + int cpu; >> > + struct coresight_device *csdev; >> > + char *buf; >> > + unsigned int buf_size; >> > + struct list_head list; >> > +}; >> > + >> > +static DEFINE_SPINLOCK(coresight_kdump_lock); >> > +static LIST_HEAD(coresight_kdump_list); >> > +static struct notifier_block coresight_kdump_nb; >> > + >> > +int coresight_kdump_update(struct coresight_device *csdev, char *buf, >> > + unsigned int buf_size) >> > +{ >> > + struct coresight_kdump_node *node = csdev->dump_node; >> > + >> > + if (!node) { >> > + dev_err(&csdev->dev, "Failed to update dump node.\n"); >> > + return -EINVAL; >> > + } >> > + >> > + node->buf = buf; >> > + node->buf_size = buf_size; >> > + return 0; >> > +} >> > + >> > +int coresight_kdump_add(struct coresight_device *csdev, int cpu) >> > +{ >> > + struct coresight_kdump_node *node; >> > + unsigned long flags; >> > + >> > + node = kzalloc(sizeof(*node), GFP_KERNEL); >> > + if (!node) >> > + return -ENOMEM; >> > + >> > + csdev->dump_node = (void *)node; >> > + node->cpu = cpu; >> > + node->csdev = csdev; >> > + >> > + spin_lock_irqsave(&coresight_kdump_lock, flags); >> > + list_add_tail(&node->list, &coresight_kdump_list); >> > + spin_unlock_irqrestore(&coresight_kdump_lock, flags); >> > + return 0; >> > +} >> > + >> > +void coresight_kdump_del(struct coresight_device *csdev) >> > +{ >> > + struct coresight_kdump_node *node, *next; >> > + unsigned long flags; >> > + >> > + spin_lock_irqsave(&coresight_kdump_lock, flags); >> > + list_for_each_entry_safe(node, next, &coresight_kdump_list, list) { >> > + if (node->csdev == csdev) { >> > + list_del(&node->list); >> > + kfree(node); >> > + break; >> > + } >> > + } >> > + spin_unlock_irqrestore(&coresight_kdump_lock, flags); >> > +} >> > + >> > +static coresight_cb_t >> > +coresight_kdump_get_cb(struct coresight_device *csdev) >> > +{ >> > + coresight_cb_t cb = NULL; >> > + >> > + switch (csdev->type) { >> > + case CORESIGHT_DEV_TYPE_SINK: >> > + case CORESIGHT_DEV_TYPE_LINKSINK: >> > + cb = sink_ops(csdev)->panic_cb; >> > + break; >> > + case CORESIGHT_DEV_TYPE_SOURCE: >> > + cb = source_ops(csdev)->panic_cb; >> > + break; >> > + case CORESIGHT_DEV_TYPE_LINK: >> > + cb = link_ops(csdev)->panic_cb; >> > + break; >> >> I don't see why we need a callback for link devices - didn't I raised >> that question before? > > Yes, sorry I have not deleted for link devices completely. Will remove > it. > >> And I've been thinking further about this. The way we call the panic callbacks >> won't work. When a panic is triggered there might be trace data in the CS network >> that hasn't made it to the sink yet and calling the panic callbacks for sinks >> will lead to a loss of data. >> >> That is why, when accessing from both sysFS and perf, the current implementation >> takes great care to stop the tracers first and then deal with the sink. To fix >> this I suggest to call the panic callbacks only for sources. What happens there >> will depend on what interface is used (sysFS or perf) - look at what is >> currently done to get a better understanding. > > Will look into this. > > If I understand correctly, we need firstly stop tracers and save trace > data from sink, right? If so we need use single callback function to > disable path and dump data for sink, will study current case and check > what's the clean method for kdump. You are correct - only the callback for sources should be used. In that callback processing is different whether trace collection was started from sysFS or perf. The code already exists, it's just a matter of doing the right thing. > >> > + default: >> > + dev_info(&csdev->dev, "Unsupport panic dump\n"); >> >> I would not bother with the dev_info()... > > Will remove it. > >> > + break; >> > + } >> > + >> > + return cb; >> > +} >> > + >> > +/** >> > + * coresight_kdump_notify - Invoke panic dump callbacks, this is >> > + * the main function to fulfill the panic dump. It distinguishs >> > + * to two types: one is pre panic dump which the callback function >> > + * handler is NULL and coresight drivers can use function >> > + * coresight_kdump_update() to directly update dump buffer base >> > + * address and buffer size, for this case this function does nothing >> > + * and directly bail out; another case is for post panic dump so >> > + * invoke callback on alive CPU. >> >> Now that pre and post processing are gone the description above doesn't match >> what the function is doing. > > Yeah, will remove 'pre' and 'post' to avoid confusion. > >> > + * >> > + * Returns: 0 on success. >> > + */ >> > +static int coresight_kdump_notify(struct notifier_block *nb, >> > + unsigned long mode, void *_unused) >> > +{ >> > + struct coresight_kdump_node *node; >> > + struct coresight_device *csdev; >> > + coresight_cb_t cb; >> > + unsigned long flags; >> > + >> > + spin_lock_irqsave(&coresight_kdump_lock, flags); >> > + >> > + list_for_each_entry(node, &coresight_kdump_list, list) { >> > + csdev = node->csdev; >> > + cb = coresight_kdump_get_cb(csdev); >> > + if (cb) >> > + cb(csdev); >> > + } >> > + >> > + spin_unlock_irqrestore(&coresight_kdump_lock, flags); >> > + return 0; >> > +} >> > + >> > +static int __init coresight_kdump_init(void) >> > +{ >> > + int ret; >> > + >> > + coresight_kdump_nb.notifier_call = coresight_kdump_notify; >> > + ret = atomic_notifier_chain_register(&panic_notifier_list, >> > + &coresight_kdump_nb); >> > + return ret; >> > +} >> > +late_initcall(coresight_kdump_init); >> > diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h >> > index f1d0e21d..937750e 100644 >> > --- a/drivers/hwtracing/coresight/coresight-priv.h >> > +++ b/drivers/hwtracing/coresight/coresight-priv.h >> > @@ -151,4 +151,17 @@ static inline int etm_readl_cp14(u32 off, unsigned int *val) { return 0; } >> > static inline int etm_writel_cp14(u32 off, u32 val) { return 0; } >> > #endif >> > >> > +#ifdef CONFIG_CORESIGHT_PANIC_KDUMP >> > +extern int coresight_kdump_add(struct coresight_device *csdev, int cpu); >> > +extern void coresight_kdump_del(struct coresight_device *csdev); >> > +extern int coresight_kdump_update(struct coresight_device *csdev, >> > + char *buf, unsigned int buf_size); >> > +#else >> > +static inline int >> > +coresight_kdump_add(struct coresight_device *csdev, int cpu) { return 0; } >> > +static inline void coresight_kdump_del(struct coresight_device *csdev) {} >> > +static inline int coresight_kdump_update(struct coresight_device *csdev, >> > + char *buf, unsigned int buf_size) { return 0; } >> >> static inline int >> coresight_kdump_update(struct coresight_device *csdev, char *buf, >> unsigned int buf_size) { return 0; } > > Will fix. > >> > +#endif >> > + >> > #endif >> > diff --git a/include/linux/coresight.h b/include/linux/coresight.h >> > index d950dad..43e40fa 100644 >> > --- a/include/linux/coresight.h >> > +++ b/include/linux/coresight.h >> > @@ -171,6 +171,7 @@ struct coresight_device { >> > bool orphan; >> > bool enable; /* true only if configured as part of a path */ >> > bool activated; /* true only if a sink is part of a path */ >> > + void *dump_node; >> >> Please add a description for this entry. > > Will do. > > Thanks, > Leo Yan > >> > }; >> > >> > #define to_coresight_device(d) container_of(d, struct coresight_device, dev) >> > @@ -189,6 +190,7 @@ struct coresight_device { >> > * @set_buffer: initialises buffer mechanic before a trace session. >> > * @reset_buffer: finalises buffer mechanic after a trace session. >> > * @update_buffer: update buffer pointers after a trace session. >> > + * @panic_cb: hook function for panic notifier. >> > */ >> > struct coresight_ops_sink { >> > int (*enable)(struct coresight_device *csdev, u32 mode); >> > @@ -205,6 +207,7 @@ struct coresight_ops_sink { >> > void (*update_buffer)(struct coresight_device *csdev, >> > struct perf_output_handle *handle, >> > void *sink_config); >> > + void (*panic_cb)(void *data); >> > }; >> > >> > /** >> > @@ -212,10 +215,12 @@ struct coresight_ops_sink { >> > * Operations available for links. >> > * @enable: enables flow between iport and oport. >> > * @disable: disables flow between iport and oport. >> > + * @panic_cb: hook function for panic notifier. >> > */ >> > struct coresight_ops_link { >> > int (*enable)(struct coresight_device *csdev, int iport, int oport); >> > void (*disable)(struct coresight_device *csdev, int iport, int oport); >> > + void (*panic_cb)(void *data); >> > }; >> > >> > /** >> > @@ -227,6 +232,7 @@ struct coresight_ops_link { >> > * to the HW. >> > * @enable: enables tracing for a source. >> > * @disable: disables tracing for a source. >> > + * @panic_cb: hook function for panic notifier. >> > */ >> > struct coresight_ops_source { >> > int (*cpu_id)(struct coresight_device *csdev); >> > @@ -235,6 +241,7 @@ struct coresight_ops_source { >> > struct perf_event *event, u32 mode); >> > void (*disable)(struct coresight_device *csdev, >> > struct perf_event *event); >> > + void (*panic_cb)(void *data); >> > }; >> > >> > struct coresight_ops { >> > -- >> > 2.7.4 >> >
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig index ef9cb3c..4812529 100644 --- a/drivers/hwtracing/coresight/Kconfig +++ b/drivers/hwtracing/coresight/Kconfig @@ -103,4 +103,13 @@ config CORESIGHT_CPU_DEBUG properly, please refer Documentation/trace/coresight-cpu-debug.txt for detailed description and the example for usage. +config CORESIGHT_PANIC_KDUMP + bool "CoreSight Panic Kdump driver" + depends on ARM || ARM64 + help + This driver provides panic kdump functionality for CoreSight + devices. When a kernel panic happen a device supplied callback function + is used to save trace data to memory. From there we rely on kdump to extract + the trace data from kernel dump file. + endif diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index 61db9dd..946fe19 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_CORESIGHT_SOURCE_ETM4X) += coresight-etm4x.o \ obj-$(CONFIG_CORESIGHT_DYNAMIC_REPLICATOR) += coresight-dynamic-replicator.o obj-$(CONFIG_CORESIGHT_STM) += coresight-stm.o obj-$(CONFIG_CORESIGHT_CPU_DEBUG) += coresight-cpu-debug.o +obj-$(CONFIG_CORESIGHT_PANIC_KDUMP) += coresight-panic-kdump.o diff --git a/drivers/hwtracing/coresight/coresight-panic-kdump.c b/drivers/hwtracing/coresight/coresight-panic-kdump.c new file mode 100644 index 0000000..c21d20b --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-panic-kdump.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017 Linaro Limited. +#include <linux/coresight.h> +#include <linux/coresight-pmu.h> +#include <linux/cpumask.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/mm.h> +#include <linux/perf_event.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include "coresight-priv.h" + +typedef void (*coresight_cb_t)(void *data); + +/** + * struct coresight_kdump_node - Node information for dump + * @cpu: The cpu this node is affined to. + * @csdev: Handler for coresight device. + * @buf: Pointer for dump buffer. + * @buf_size: Length of dump buffer. + * @list: Hook to the list. + */ +struct coresight_kdump_node { + int cpu; + struct coresight_device *csdev; + char *buf; + unsigned int buf_size; + struct list_head list; +}; + +static DEFINE_SPINLOCK(coresight_kdump_lock); +static LIST_HEAD(coresight_kdump_list); +static struct notifier_block coresight_kdump_nb; + +int coresight_kdump_update(struct coresight_device *csdev, char *buf, + unsigned int buf_size) +{ + struct coresight_kdump_node *node = csdev->dump_node; + + if (!node) { + dev_err(&csdev->dev, "Failed to update dump node.\n"); + return -EINVAL; + } + + node->buf = buf; + node->buf_size = buf_size; + return 0; +} + +int coresight_kdump_add(struct coresight_device *csdev, int cpu) +{ + struct coresight_kdump_node *node; + unsigned long flags; + + node = kzalloc(sizeof(*node), GFP_KERNEL); + if (!node) + return -ENOMEM; + + csdev->dump_node = (void *)node; + node->cpu = cpu; + node->csdev = csdev; + + spin_lock_irqsave(&coresight_kdump_lock, flags); + list_add_tail(&node->list, &coresight_kdump_list); + spin_unlock_irqrestore(&coresight_kdump_lock, flags); + return 0; +} + +void coresight_kdump_del(struct coresight_device *csdev) +{ + struct coresight_kdump_node *node, *next; + unsigned long flags; + + spin_lock_irqsave(&coresight_kdump_lock, flags); + list_for_each_entry_safe(node, next, &coresight_kdump_list, list) { + if (node->csdev == csdev) { + list_del(&node->list); + kfree(node); + break; + } + } + spin_unlock_irqrestore(&coresight_kdump_lock, flags); +} + +static coresight_cb_t +coresight_kdump_get_cb(struct coresight_device *csdev) +{ + coresight_cb_t cb = NULL; + + switch (csdev->type) { + case CORESIGHT_DEV_TYPE_SINK: + case CORESIGHT_DEV_TYPE_LINKSINK: + cb = sink_ops(csdev)->panic_cb; + break; + case CORESIGHT_DEV_TYPE_SOURCE: + cb = source_ops(csdev)->panic_cb; + break; + case CORESIGHT_DEV_TYPE_LINK: + cb = link_ops(csdev)->panic_cb; + break; + default: + dev_info(&csdev->dev, "Unsupport panic dump\n"); + break; + } + + return cb; +} + +/** + * coresight_kdump_notify - Invoke panic dump callbacks, this is + * the main function to fulfill the panic dump. It distinguishs + * to two types: one is pre panic dump which the callback function + * handler is NULL and coresight drivers can use function + * coresight_kdump_update() to directly update dump buffer base + * address and buffer size, for this case this function does nothing + * and directly bail out; another case is for post panic dump so + * invoke callback on alive CPU. + * + * Returns: 0 on success. + */ +static int coresight_kdump_notify(struct notifier_block *nb, + unsigned long mode, void *_unused) +{ + struct coresight_kdump_node *node; + struct coresight_device *csdev; + coresight_cb_t cb; + unsigned long flags; + + spin_lock_irqsave(&coresight_kdump_lock, flags); + + list_for_each_entry(node, &coresight_kdump_list, list) { + csdev = node->csdev; + cb = coresight_kdump_get_cb(csdev); + if (cb) + cb(csdev); + } + + spin_unlock_irqrestore(&coresight_kdump_lock, flags); + return 0; +} + +static int __init coresight_kdump_init(void) +{ + int ret; + + coresight_kdump_nb.notifier_call = coresight_kdump_notify; + ret = atomic_notifier_chain_register(&panic_notifier_list, + &coresight_kdump_nb); + return ret; +} +late_initcall(coresight_kdump_init); diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h index f1d0e21d..937750e 100644 --- a/drivers/hwtracing/coresight/coresight-priv.h +++ b/drivers/hwtracing/coresight/coresight-priv.h @@ -151,4 +151,17 @@ static inline int etm_readl_cp14(u32 off, unsigned int *val) { return 0; } static inline int etm_writel_cp14(u32 off, u32 val) { return 0; } #endif +#ifdef CONFIG_CORESIGHT_PANIC_KDUMP +extern int coresight_kdump_add(struct coresight_device *csdev, int cpu); +extern void coresight_kdump_del(struct coresight_device *csdev); +extern int coresight_kdump_update(struct coresight_device *csdev, + char *buf, unsigned int buf_size); +#else +static inline int +coresight_kdump_add(struct coresight_device *csdev, int cpu) { return 0; } +static inline void coresight_kdump_del(struct coresight_device *csdev) {} +static inline int coresight_kdump_update(struct coresight_device *csdev, + char *buf, unsigned int buf_size) { return 0; } +#endif + #endif diff --git a/include/linux/coresight.h b/include/linux/coresight.h index d950dad..43e40fa 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -171,6 +171,7 @@ struct coresight_device { bool orphan; bool enable; /* true only if configured as part of a path */ bool activated; /* true only if a sink is part of a path */ + void *dump_node; }; #define to_coresight_device(d) container_of(d, struct coresight_device, dev) @@ -189,6 +190,7 @@ struct coresight_device { * @set_buffer: initialises buffer mechanic before a trace session. * @reset_buffer: finalises buffer mechanic after a trace session. * @update_buffer: update buffer pointers after a trace session. + * @panic_cb: hook function for panic notifier. */ struct coresight_ops_sink { int (*enable)(struct coresight_device *csdev, u32 mode); @@ -205,6 +207,7 @@ struct coresight_ops_sink { void (*update_buffer)(struct coresight_device *csdev, struct perf_output_handle *handle, void *sink_config); + void (*panic_cb)(void *data); }; /** @@ -212,10 +215,12 @@ struct coresight_ops_sink { * Operations available for links. * @enable: enables flow between iport and oport. * @disable: disables flow between iport and oport. + * @panic_cb: hook function for panic notifier. */ struct coresight_ops_link { int (*enable)(struct coresight_device *csdev, int iport, int oport); void (*disable)(struct coresight_device *csdev, int iport, int oport); + void (*panic_cb)(void *data); }; /** @@ -227,6 +232,7 @@ struct coresight_ops_link { * to the HW. * @enable: enables tracing for a source. * @disable: disables tracing for a source. + * @panic_cb: hook function for panic notifier. */ struct coresight_ops_source { int (*cpu_id)(struct coresight_device *csdev); @@ -235,6 +241,7 @@ struct coresight_ops_source { struct perf_event *event, u32 mode); void (*disable)(struct coresight_device *csdev, struct perf_event *event); + void (*panic_cb)(void *data); }; struct coresight_ops {
After kernel panic happens, coresight has many useful info can be used for analysis. For example, the trace info from ETB RAM can be used to check the CPU execution flows before crash. So we can save the tracing data from sink devices, and rely on kdump to save DDR content and uses "crash" tool to extract coresight dumping from vmcore file. This patch is to add a simple framework to support panic dump functionality; it registers panic notifier, and provide the general APIs {coresight_kdump_add|coresight_kdump_del} as helper functions so any coresight device can add itself into dump list or delete as needed. This driver provides helper function coresight_kdump_update() to update the dump buffer base address and buffer size. This function can be used by coresight driver, e.g. it can be used to save ETM meta data info at runtime and these info can be prepared pre panic happening. When kernel panic happens, the notifier iterates dump list and calls callback function to dump device specific info. The panic dump is mainly used to dump trace data so we can get to know the execution flow before the panic happens. Signed-off-by: Leo Yan <leo.yan@linaro.org> --- drivers/hwtracing/coresight/Kconfig | 9 ++ drivers/hwtracing/coresight/Makefile | 1 + .../hwtracing/coresight/coresight-panic-kdump.c | 154 +++++++++++++++++++++ drivers/hwtracing/coresight/coresight-priv.h | 13 ++ include/linux/coresight.h | 7 + 5 files changed, 184 insertions(+) create mode 100644 drivers/hwtracing/coresight/coresight-panic-kdump.c