@@ -27,6 +27,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/hid.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/usb.h>
@@ -1721,6 +1722,83 @@ static int snd_microii_controls_create(struct usb_mixer_interface *mixer)
return 0;
}
+/* Creative Sound Blaster E1 */
+
+static int snd_soundblaster_e1_switch_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = kcontrol->private_value;
+ return 0;
+}
+
+static int snd_soundblaster_e1_switch_update(struct usb_mixer_interface *mixer,
+ unsigned char state)
+{
+ struct snd_usb_audio *chip = mixer->chip;
+ int err;
+ unsigned char buff[2];
+
+ buff[0] = 0x02;
+ buff[1] = state ? 0x02 : 0x00;
+
+ err = snd_usb_lock_shutdown(chip);
+ if (err < 0)
+ return err;
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_sndctrlpipe(chip->dev, 0), HID_REQ_SET_REPORT,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ 0x0202, 3, buff, 2);
+ snd_usb_unlock_shutdown(chip);
+ return err;
+}
+
+static int snd_soundblaster_e1_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+ unsigned char value = !!ucontrol->value.integer.value[0];
+ int err;
+
+ if (kcontrol->private_value == value)
+ return 0;
+ kcontrol->private_value = value;
+ err = snd_soundblaster_e1_switch_update(list->mixer, value);
+ return err < 0 ? err : 1;
+}
+
+static int snd_soundblaster_e1_switch_resume(struct usb_mixer_elem_list *list)
+{
+ return snd_soundblaster_e1_switch_update(list->mixer,
+ list->kctl->private_value);
+}
+
+static int snd_soundblaster_e1_switch_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static const char *const texts[2] = {
+ "Mic", "Aux"
+ };
+
+ return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
+}
+
+static struct snd_kcontrol_new snd_soundblaster_e1_input_switch = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Input Source",
+ .info = snd_soundblaster_e1_switch_info,
+ .get = snd_soundblaster_e1_switch_get,
+ .put = snd_soundblaster_e1_switch_put,
+ .private_value = 0,
+};
+
+static int snd_soundblaster_e1_switch_create(struct usb_mixer_interface *mixer)
+{
+ return add_single_ctl_with_resume(mixer, 0,
+ snd_soundblaster_e1_switch_resume,
+ &snd_soundblaster_e1_input_switch,
+ NULL);
+}
+
int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
{
int err = 0;
@@ -1802,6 +1880,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
case USB_ID(0x1235, 0x800c): /* Focusrite Scarlett 18i20 */
err = snd_scarlett_controls_create(mixer);
break;
+
+ case USB_ID(0x041e, 0x323b): /* Creative Sound Blaster E1 */
+ err = snd_soundblaster_e1_switch_create(mixer);
+ break;
}
return err;
The E1 has two headphone jacks, one of which can be set as a microphone input. In the default mode, it uses the built-in microphone as an input. By sending a special command, the second headphone jack is instead used as an input. This might work with the E3 as well, but I don't have one of those to test it. Signed-off-by: Ian Douglas Scott <ian@iandouglasscott.com> --- sound/usb/mixer_quirks.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+)