Message ID | 20180125063949.12916-3-yi.zhang@huawei.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thu, Jan 25, 2018 at 8:39 AM, zhangyi (F) <yi.zhang@huawei.com> wrote: > Hook filesystem check helper to _check_test_fs and _check_scratch_fs for > constants underlying dirs of overlay filesystem, and introduce scratch > check helpers for optionally lower/upper/work dirs. These helpers works > only if fsck.overlay exists. > > [ _check_test_fs/_check_scratch_fs part picked from Amir's patch, thanks ] > > Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> > --- > common/overlay | 120 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > common/rc | 4 +- > 2 files changed, 122 insertions(+), 2 deletions(-) > > diff --git a/common/overlay b/common/overlay > index c19dabc..524976f 100644 > --- a/common/overlay > +++ b/common/overlay > @@ -152,6 +152,14 @@ _require_scratch_overlay_feature() > _scratch_unmount > } > > +# Require the same scratch device as _require_scratch, but do not check > +# the constants OVL_LOWER/OVL_UPPER/OVL_WORK dirs, should use together > +# with optionally lower/upper/work dirs and do check explicitly after test. > +_require_overlay_scratch_dirs() > +{ > + _require_scratch_nocheck > +} > + > # Helper function to check underlying dirs of overlay filesystem > _overlay_fsck_dirs() > { > @@ -165,3 +173,115 @@ _overlay_fsck_dirs() > $FSCK_OVERLAY_PROG -o lowerdir=$lowerdir -o upperdir=$upperdir \ > -o workdir=$workdir $options > } > + > +_overlay_check_dirs() > +{ > + local lowerdir=$1 > + local upperdir=$2 > + local workdir=$3 > + local err=0 > + > + _overlay_fsck_dirs $* $FSCK_OPTIONS >>$tmp.fsck 2>&1 > + if [ $? -ne 0 ]; then > + _log_err "_overlay_check_fs: overlayfs on $lowerdir,$upperdir,$workdir is inconsistent" > + > + echo "*** fsck.overlay output ***" >>$seqres.full > + cat $tmp.fsck >>$seqres.full > + echo "*** end fsck.overlay output" >>$seqres.full > + > + echo "*** mount output ***" >>$seqres.full > + _mount >>$seqres.full > + echo "*** end mount output" >>$seqres.full > + > + err=1 > + fi > + rm -f $tmp.fsck > + > + return $err > +} > + > +# Check the same mnt/dev of _check_overlay_scratch_fs, but check optionally > +# lower/upper/work dirs of overlay filesystem, should use together with > +# _require_overlay_scratch_dirs > +_overlay_check_scratch_dirs() > +{ > + local lowerdir=$1 > + local upperdir=$2 > + local workdir=$3 > + > + # Need to umount overlay for scratch dir check > + local ovl_mounted=`_is_mounted $SCRATCH_MNT` > + [ -z "$ovl_mounted" ] || $UMOUNT_PROG $SCRATCH_MNT > + > + _overlay_check_dirs $lowerdir $upperdir $workdir > + local ret=$? > + > + if [ $ret -eq 0 -a -n "$ovl_mounted" ]; then > + # overlay was mounted, remount besides extra mount options > + _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir I think that 'shift 3' and passing $* to _overlay_scratch_mount_dirs would be good practice here. Especially, because extra mount options may affect fsck.overlay someday. Imagine that fsck.overlay ... -oindex=on may be used to verify consistency and rebuild index for hardlinks and -onfs_export=on may be used to specify consistency check and rebuild of index for all files and directories. > + ret=$? > + fi > + > + return $ret > +} > + > +_overlay_check_fs() > +{ > + local ovl_mnt=$1 > + local base_dev=$4 > + local base_mnt=$5 > + shift 1 This shift 1 is confusing. Should document that it aligns arguments for _overlay_base_mount. Probably would be nicer to shift right after assigning ovl_mnt and then assign $3/$4 to base_dev/mnt. Nice to review my own patch ;-) > + > + [ "$FSTYP" = overlay ] || return 0 > + > + # Base fs needs to be mounted to check overlay dirs > + local base_mounted="" > + [ -z "$base_dev" ] || \ > + base_mounted=`_is_mounted $base_dev $OVL_BASE_FSTYP` Not that I am proposing to support -overlay run where FSTYP is not defined in config file, but how does this behave in such a case? Perhaps add || [ -z "$OVL_BASE_FSTYP" ] above? > + > + if [ -z "$base_mounted" ]; then > + _overlay_base_mount $* > + else > + # Need to umount overlay for dir check > + local ovl_mounted=`_is_mounted $ovl_mnt` Define local outside if scope. Thanks, Amir. -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2018/1/25 16:21, Amir Goldstein Wrote: > On Thu, Jan 25, 2018 at 8:39 AM, zhangyi (F) <yi.zhang@huawei.com> wrote: >> +# Check the same mnt/dev of _check_overlay_scratch_fs, but check optionally >> +# lower/upper/work dirs of overlay filesystem, should use together with >> +# _require_overlay_scratch_dirs >> +_overlay_check_scratch_dirs() >> +{ >> + local lowerdir=$1 >> + local upperdir=$2 >> + local workdir=$3 >> + >> + # Need to umount overlay for scratch dir check >> + local ovl_mounted=`_is_mounted $SCRATCH_MNT` >> + [ -z "$ovl_mounted" ] || $UMOUNT_PROG $SCRATCH_MNT >> + >> + _overlay_check_dirs $lowerdir $upperdir $workdir >> + local ret=$? >> + >> + if [ $ret -eq 0 -a -n "$ovl_mounted" ]; then >> + # overlay was mounted, remount besides extra mount options >> + _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir > > I think that 'shift 3' and passing $* to _overlay_scratch_mount_dirs > would be good practice here. > Especially, because extra mount options may affect fsck.overlay > someday. Imagine that fsck.overlay ... -oindex=on may be used to > verify consistency and rebuild index for hardlinks and -onfs_export=on may > be used to specify consistency check and rebuild of index for all > files and directories. > Good suggestion, fsck.overlay will handles these extra options sooner or later. [..] >> + >> + [ "$FSTYP" = overlay ] || return 0 >> + >> + # Base fs needs to be mounted to check overlay dirs >> + local base_mounted="" >> + [ -z "$base_dev" ] || \ >> + base_mounted=`_is_mounted $base_dev $OVL_BASE_FSTYP` > > Not that I am proposing to support -overlay run where FSTYP is not > defined in config file, but how does this behave in such a case? > Perhaps add || [ -z "$OVL_BASE_FSTYP" ] above? > If FSTYP is not defined, _is_mounted will check the wrong fs and base_mounted becomes empty, and it's same to add [ -z "$OVL_BASE_FSTYP" ], both will lead to double mount. I think it's better to use _fs_type as _check_generic_filesystem does. Thanks, Yi. -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/common/overlay b/common/overlay index c19dabc..524976f 100644 --- a/common/overlay +++ b/common/overlay @@ -152,6 +152,14 @@ _require_scratch_overlay_feature() _scratch_unmount } +# Require the same scratch device as _require_scratch, but do not check +# the constants OVL_LOWER/OVL_UPPER/OVL_WORK dirs, should use together +# with optionally lower/upper/work dirs and do check explicitly after test. +_require_overlay_scratch_dirs() +{ + _require_scratch_nocheck +} + # Helper function to check underlying dirs of overlay filesystem _overlay_fsck_dirs() { @@ -165,3 +173,115 @@ _overlay_fsck_dirs() $FSCK_OVERLAY_PROG -o lowerdir=$lowerdir -o upperdir=$upperdir \ -o workdir=$workdir $options } + +_overlay_check_dirs() +{ + local lowerdir=$1 + local upperdir=$2 + local workdir=$3 + local err=0 + + _overlay_fsck_dirs $* $FSCK_OPTIONS >>$tmp.fsck 2>&1 + if [ $? -ne 0 ]; then + _log_err "_overlay_check_fs: overlayfs on $lowerdir,$upperdir,$workdir is inconsistent" + + echo "*** fsck.overlay output ***" >>$seqres.full + cat $tmp.fsck >>$seqres.full + echo "*** end fsck.overlay output" >>$seqres.full + + echo "*** mount output ***" >>$seqres.full + _mount >>$seqres.full + echo "*** end mount output" >>$seqres.full + + err=1 + fi + rm -f $tmp.fsck + + return $err +} + +# Check the same mnt/dev of _check_overlay_scratch_fs, but check optionally +# lower/upper/work dirs of overlay filesystem, should use together with +# _require_overlay_scratch_dirs +_overlay_check_scratch_dirs() +{ + local lowerdir=$1 + local upperdir=$2 + local workdir=$3 + + # Need to umount overlay for scratch dir check + local ovl_mounted=`_is_mounted $SCRATCH_MNT` + [ -z "$ovl_mounted" ] || $UMOUNT_PROG $SCRATCH_MNT + + _overlay_check_dirs $lowerdir $upperdir $workdir + local ret=$? + + if [ $ret -eq 0 -a -n "$ovl_mounted" ]; then + # overlay was mounted, remount besides extra mount options + _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir + ret=$? + fi + + return $ret +} + +_overlay_check_fs() +{ + local ovl_mnt=$1 + local base_dev=$4 + local base_mnt=$5 + shift 1 + + [ "$FSTYP" = overlay ] || return 0 + + # Base fs needs to be mounted to check overlay dirs + local base_mounted="" + [ -z "$base_dev" ] || \ + base_mounted=`_is_mounted $base_dev $OVL_BASE_FSTYP` + + if [ -z "$base_mounted" ]; then + _overlay_base_mount $* + else + # Need to umount overlay for dir check + local ovl_mounted=`_is_mounted $ovl_mnt` + [ -z "$ovl_mounted" ] || $UMOUNT_PROG $ovl_mnt + fi + + _overlay_check_dirs $base_mnt/$OVL_LOWER $base_mnt/$OVL_UPPER \ + $base_mnt/$OVL_WORK + local ret=$? + + if [ -z "$base_mounted" ]; then + _overlay_base_unmount "$base_dev" "$base_mnt" + elif [ $ret -eq 0 -a -n "$ovl_mounted" ]; then + # overlay was mounted, remount besides extra mount options + _overlay_mount $base_mnt $ovl_mnt + ret=$? + fi + + if [ $ret != 0 ]; then + status=1 + if [ "$iam" != "check" ]; then + exit 1 + fi + return 1 + fi + + return 0 +} + +_check_overlay_test_fs() +{ + _overlay_check_fs "$TEST_DIR" \ + OVL_BASE_TEST_DEV OVL_BASE_TEST_DIR \ + "$OVL_BASE_TEST_DEV" "$OVL_BASE_TEST_DIR" \ + $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS +} + +_check_overlay_scratch_fs() +{ + _overlay_check_fs "$SCRATCH_MNT" \ + OVL_BASE_SCRATCH_DEV OVL_BASE_SCRATCH_MNT \ + "$OVL_BASE_SCRATCH_DEV" "$OVL_BASE_SCRATCH_MNT" \ + $OVL_BASE_MOUNT_OPTIONS $SELINUX_MOUNT_OPTIONS +} diff --git a/common/rc b/common/rc index ceb5d44..5dfed1e 100644 --- a/common/rc +++ b/common/rc @@ -2585,7 +2585,7 @@ _check_test_fs() # no way to check consistency for GlusterFS ;; overlay) - # no way to check consistency for overlay + _check_overlay_test_fs ;; pvfs2) ;; @@ -2643,7 +2643,7 @@ _check_scratch_fs() # no way to check consistency for GlusterFS ;; overlay) - # no way to check consistency for overlay + _check_overlay_scratch_fs ;; pvfs2) ;;
Hook filesystem check helper to _check_test_fs and _check_scratch_fs for constants underlying dirs of overlay filesystem, and introduce scratch check helpers for optionally lower/upper/work dirs. These helpers works only if fsck.overlay exists. [ _check_test_fs/_check_scratch_fs part picked from Amir's patch, thanks ] Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> --- common/overlay | 120 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ common/rc | 4 +- 2 files changed, 122 insertions(+), 2 deletions(-)