diff mbox

[PATCH/RFT,v3] gpio: gpio-rcar: Support S2RAM

Message ID 1516040426-15507-1-git-send-email-ykaneko0929@gmail.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Yoshihiro Kaneko Jan. 15, 2018, 6:20 p.m. UTC
From: Hien Dang <hien.dang.eb@renesas.com>

This patch adds an implementation that saves and restores the state of
GPIO configuration on suspend and resume.

Signed-off-by: Hien Dang <hien.dang.eb@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Modify structure of the bank info to simplify a saving registers]
[Remove DEV_PM_OPS macro]
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---

This patch is based on the for-next branch of linux-gpio tree.

v2 [Yoshihiro Kaneko]
* Modify structure of the bank info as suggested by Geert Uytterhoeven

v3 [Yoshihiro Kaneko]
* Remove DEV_PM_OPS macro as suggested by Vladimir Zapolskiy

 drivers/gpio/gpio-rcar.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

Comments

Geert Uytterhoeven Jan. 26, 2018, 3:31 p.m. UTC | #1
Hi Kaneko-san,

On Mon, Jan 15, 2018 at 7:20 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote:
> From: Hien Dang <hien.dang.eb@renesas.com>
>
> This patch adds an implementation that saves and restores the state of
> GPIO configuration on suspend and resume.
>
> Signed-off-by: Hien Dang <hien.dang.eb@renesas.com>
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> [Modify structure of the bank info to simplify a saving registers]
> [Remove DEV_PM_OPS macro]
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> ---
>
> This patch is based on the for-next branch of linux-gpio tree.
>
> v2 [Yoshihiro Kaneko]
> * Modify structure of the bank info as suggested by Geert Uytterhoeven
>
> v3 [Yoshihiro Kaneko]
> * Remove DEV_PM_OPS macro as suggested by Vladimir Zapolskiy

Thanks for the updates!

It looks like not much is left from the original patches...

> --- a/drivers/gpio/gpio-rcar.c
> +++ b/drivers/gpio/gpio-rcar.c
> @@ -31,6 +31,16 @@
>  #include <linux/spinlock.h>
>  #include <linux/slab.h>
>
> +struct gpio_rcar_bank_info {
> +       u32 iointsel;
> +       u32 inoutsel;
> +       u32 outdt;
> +       u32 active_high_rising_edge;
> +       u32 level_trigger;
> +       u32 both;
> +       u32 intmsk;
> +};
> +
>  struct gpio_rcar_priv {
>         void __iomem *base;
>         spinlock_t lock;
> @@ -41,6 +51,7 @@ struct gpio_rcar_priv {
>         unsigned int irq_parent;
>         bool has_both_edge_trigger;
>         bool needs_clk;
> +       struct gpio_rcar_bank_info bank_info;
>  };
>
>  #define IOINTSEL 0x00  /* General IO/Interrupt Switching Register */
> @@ -531,11 +542,65 @@ static int gpio_rcar_remove(struct platform_device *pdev)
>         return 0;
>  }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int gpio_rcar_suspend(struct device *dev)
> +{
> +       struct gpio_rcar_priv *p = dev_get_drvdata(dev);
> +
> +       p->bank_info.iointsel = gpio_rcar_read(p, IOINTSEL);
> +       p->bank_info.inoutsel = gpio_rcar_read(p, INOUTSEL);
> +       p->bank_info.outdt = gpio_rcar_read(p, OUTDT);
> +       p->bank_info.intmsk = gpio_rcar_read(p, INTMSK);

Given you just store values read from the hardware registers, why
not name all fields below according to the registers' names, like you did
for the above?
Especially for active_high_rising_edge and level_trigger, as the semantics
are inverted, compared to the POSNEG resp. EDGLEVEL registers.

> +       p->bank_info.active_high_rising_edge = gpio_rcar_read(p, POSNEG);
> +       p->bank_info.level_trigger = gpio_rcar_read(p, EDGLEVEL);
> +       p->bank_info.both = gpio_rcar_read(p, BOTHEDGE);

R-Car Gen1 does not have the BOTHEDGE.
Hence it should be read only if p->has_both_edge_trigger is true;

However, do we need to save/restore the configuration on all supported SoCs?
Shouldn't it depend on PSCI, like is done in drivers/pinctrl/sh-pfc/core.c
and drivers/clk/renesas/renesas-cpg-mssr.c?

> +
> +       return 0;
> +}
> +
> +static int gpio_rcar_resume(struct device *dev)
> +{
> +       struct gpio_rcar_priv *p = dev_get_drvdata(dev);
> +       int offset;

unsigned int

> +       u32 mask;
> +
> +       for (offset = 0; offset < p->gpio_chip.ngpio; offset++) {
> +               mask = BIT(offset);
> +               /* I/O pin */
> +               if (!(p->bank_info.iointsel & mask)) {
> +                       if (p->bank_info.inoutsel & mask)
> +                               gpio_rcar_direction_output(
> +                                       &p->gpio_chip, offset,
> +                                       !!(p->bank_info.outdt & mask));
> +                       else
> +                               gpio_rcar_direction_input(&p->gpio_chip,
> +                                                         offset);
> +               /* Interrupt pin */

The comment above is not properly indented, and should be moved below
the "else" statement.

> +               } else {
> +                       gpio_rcar_config_interrupt_input_mode(
> +                               p,
> +                               offset,
> +                               !(p->bank_info.active_high_rising_edge & mask),
> +                               !!(p->bank_info.level_trigger & mask),

This logic seems to be inverted, shouldn't it be

        !(p->bank_info.level_trigger & mask),

?

> +                               !!(p->bank_info.both & mask));
> +
> +                       if (p->bank_info.intmsk & mask)
> +                               gpio_rcar_write(p, MSKCLR, mask);
> +               }
> +       }
> +
> +       return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP*/
> +
> +static SIMPLE_DEV_PM_OPS(gpio_rcar_pm_ops, gpio_rcar_suspend, gpio_rcar_resume);
> +
>  static struct platform_driver gpio_rcar_device_driver = {
>         .probe          = gpio_rcar_probe,
>         .remove         = gpio_rcar_remove,
>         .driver         = {
>                 .name   = "gpio_rcar",
> +               .pm     = &gpio_rcar_pm_ops,
>                 .of_match_table = of_match_ptr(gpio_rcar_of_table),
>         }
>  };

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
diff mbox

Patch

diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index e76de57..88fbb3e 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -31,6 +31,16 @@ 
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 
+struct gpio_rcar_bank_info {
+	u32 iointsel;
+	u32 inoutsel;
+	u32 outdt;
+	u32 active_high_rising_edge;
+	u32 level_trigger;
+	u32 both;
+	u32 intmsk;
+};
+
 struct gpio_rcar_priv {
 	void __iomem *base;
 	spinlock_t lock;
@@ -41,6 +51,7 @@  struct gpio_rcar_priv {
 	unsigned int irq_parent;
 	bool has_both_edge_trigger;
 	bool needs_clk;
+	struct gpio_rcar_bank_info bank_info;
 };
 
 #define IOINTSEL 0x00	/* General IO/Interrupt Switching Register */
@@ -531,11 +542,65 @@  static int gpio_rcar_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int gpio_rcar_suspend(struct device *dev)
+{
+	struct gpio_rcar_priv *p = dev_get_drvdata(dev);
+
+	p->bank_info.iointsel = gpio_rcar_read(p, IOINTSEL);
+	p->bank_info.inoutsel = gpio_rcar_read(p, INOUTSEL);
+	p->bank_info.outdt = gpio_rcar_read(p, OUTDT);
+	p->bank_info.intmsk = gpio_rcar_read(p, INTMSK);
+	p->bank_info.active_high_rising_edge = gpio_rcar_read(p, POSNEG);
+	p->bank_info.level_trigger = gpio_rcar_read(p, EDGLEVEL);
+	p->bank_info.both = gpio_rcar_read(p, BOTHEDGE);
+
+	return 0;
+}
+
+static int gpio_rcar_resume(struct device *dev)
+{
+	struct gpio_rcar_priv *p = dev_get_drvdata(dev);
+	int offset;
+	u32 mask;
+
+	for (offset = 0; offset < p->gpio_chip.ngpio; offset++) {
+		mask = BIT(offset);
+		/* I/O pin */
+		if (!(p->bank_info.iointsel & mask)) {
+			if (p->bank_info.inoutsel & mask)
+				gpio_rcar_direction_output(
+					&p->gpio_chip, offset,
+					!!(p->bank_info.outdt & mask));
+			else
+				gpio_rcar_direction_input(&p->gpio_chip,
+							  offset);
+		/* Interrupt pin */
+		} else {
+			gpio_rcar_config_interrupt_input_mode(
+				p,
+				offset,
+				!(p->bank_info.active_high_rising_edge & mask),
+				!!(p->bank_info.level_trigger & mask),
+				!!(p->bank_info.both & mask));
+
+			if (p->bank_info.intmsk & mask)
+				gpio_rcar_write(p, MSKCLR, mask);
+		}
+	}
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP*/
+
+static SIMPLE_DEV_PM_OPS(gpio_rcar_pm_ops, gpio_rcar_suspend, gpio_rcar_resume);
+
 static struct platform_driver gpio_rcar_device_driver = {
 	.probe		= gpio_rcar_probe,
 	.remove		= gpio_rcar_remove,
 	.driver		= {
 		.name	= "gpio_rcar",
+		.pm     = &gpio_rcar_pm_ops,
 		.of_match_table = of_match_ptr(gpio_rcar_of_table),
 	}
 };