@@ -236,91 +236,20 @@ GLOBAL(entry_SYSCALL_64_after_hwframe)
pushq %r9 /* pt_regs->r9 */
pushq %r10 /* pt_regs->r10 */
pushq %r11 /* pt_regs->r11 */
- sub $(6*8), %rsp /* pt_regs->bp, bx, r12-15 not saved */
- UNWIND_HINT_REGS extra=0
-
- TRACE_IRQS_OFF
-
- /*
- * If we need to do entry work or if we guess we'll need to do
- * exit work, go straight to the slow path.
- */
- movq PER_CPU_VAR(current_task), %r11
- testl $_TIF_WORK_SYSCALL_ENTRY|_TIF_ALLWORK_MASK, TASK_TI_flags(%r11)
- jnz entry_SYSCALL64_slow_path
-
-entry_SYSCALL_64_fastpath:
- /*
- * Easy case: enable interrupts and issue the syscall. If the syscall
- * needs pt_regs, we'll call a stub that disables interrupts again
- * and jumps to the slow path.
- */
- TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_NONE)
-#if __SYSCALL_MASK == ~0
- cmpq $__NR_syscall_max, %rax
-#else
- andl $__SYSCALL_MASK, %eax
- cmpl $__NR_syscall_max, %eax
-#endif
- ja 1f /* return -ENOSYS (already in pt_regs->ax) */
- movq %r10, %rcx
-
- /*
- * This call instruction is handled specially in stub_ptregs_64.
- * It might end up jumping to the slow path. If it jumps, RAX
- * and all argument registers are clobbered.
- */
-#ifdef CONFIG_RETPOLINE
- movq sys_call_table(, %rax, 8), %rax
- call __x86_indirect_thunk_rax
-#else
- call *sys_call_table(, %rax, 8)
-#endif
-.Lentry_SYSCALL_64_after_fastpath_call:
-
- movq %rax, RAX(%rsp)
-1:
+ pushq %rbx /* pt_regs->rbx */
+ pushq %rbp /* pt_regs->rbp */
+ pushq %r12 /* pt_regs->r12 */
+ pushq %r13 /* pt_regs->r13 */
+ pushq %r14 /* pt_regs->r14 */
+ pushq %r15 /* pt_regs->r15 */
+ UNWIND_HINT_REGS
- /*
- * If we get here, then we know that pt_regs is clean for SYSRET64.
- * If we see that no exit work is required (which we are required
- * to check with IRQs off), then we can go straight to SYSRET64.
- */
- DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_OFF
- movq PER_CPU_VAR(current_task), %r11
- testl $_TIF_ALLWORK_MASK, TASK_TI_flags(%r11)
- jnz 1f
- LOCKDEP_SYS_EXIT
- TRACE_IRQS_ON /* user mode is traced as IRQs on */
- movq RIP(%rsp), %rcx
- movq EFLAGS(%rsp), %r11
- addq $6*8, %rsp /* skip extra regs -- they were preserved */
- UNWIND_HINT_EMPTY
- jmp .Lpop_c_regs_except_rcx_r11_and_sysret
-
-1:
- /*
- * The fast path looked good when we started, but something changed
- * along the way and we need to switch to the slow path. Calling
- * raise(3) will trigger this, for example. IRQs are off.
- */
- TRACE_IRQS_ON
- ENABLE_INTERRUPTS(CLBR_ANY)
- SAVE_EXTRA_REGS
- movq %rsp, %rdi
- call syscall_return_slowpath /* returns with IRQs disabled */
- jmp return_from_SYSCALL_64
-
-entry_SYSCALL64_slow_path:
/* IRQs are off. */
- SAVE_EXTRA_REGS
movq %rsp, %rdi
call do_syscall_64 /* returns with IRQs disabled */
-return_from_SYSCALL_64:
TRACE_IRQS_IRETQ /* we're about to change IF */
/*
@@ -393,7 +322,6 @@ syscall_return_via_sysret:
/* rcx and r11 are already restored (see code above) */
UNWIND_HINT_EMPTY
POP_EXTRA_REGS
-.Lpop_c_regs_except_rcx_r11_and_sysret:
popq %rsi /* skip r11 */
popq %r10
popq %r9
@@ -424,47 +352,6 @@ syscall_return_via_sysret:
USERGS_SYSRET64
END(entry_SYSCALL_64)
-ENTRY(stub_ptregs_64)
- /*
- * Syscalls marked as needing ptregs land here.
- * If we are on the fast path, we need to save the extra regs,
- * which we achieve by trying again on the slow path. If we are on
- * the slow path, the extra regs are already saved.
- *
- * RAX stores a pointer to the C function implementing the syscall.
- * IRQs are on.
- */
- cmpq $.Lentry_SYSCALL_64_after_fastpath_call, (%rsp)
- jne 1f
-
- /*
- * Called from fast path -- disable IRQs again, pop return address
- * and jump to slow path
- */
- DISABLE_INTERRUPTS(CLBR_ANY)
- TRACE_IRQS_OFF
- popq %rax
- UNWIND_HINT_REGS extra=0
- jmp entry_SYSCALL64_slow_path
-
-1:
- JMP_NOSPEC %rax /* Called from C */
-END(stub_ptregs_64)
-
-.macro ptregs_stub func
-ENTRY(ptregs_\func)
- UNWIND_HINT_FUNC
- leaq \func(%rip), %rax
- jmp stub_ptregs_64
-END(ptregs_\func)
-.endm
-
-/* Instantiate ptregs_stub for each ptregs-using syscall */
-#define __SYSCALL_64_QUAL_(sym)
-#define __SYSCALL_64_QUAL_ptregs(sym) ptregs_stub sym
-#define __SYSCALL_64(nr, sym, qual) __SYSCALL_64_QUAL_##qual(sym)
-#include <asm/syscalls_64.h>
-
/*
* %rdi: prev task
* %rsi: next task
@@ -7,14 +7,11 @@
#include <asm/asm-offsets.h>
#include <asm/syscall.h>
-#define __SYSCALL_64_QUAL_(sym) sym
-#define __SYSCALL_64_QUAL_ptregs(sym) ptregs_##sym
-
-#define __SYSCALL_64(nr, sym, qual) extern asmlinkage long __SYSCALL_64_QUAL_##qual(sym)(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
+#define __SYSCALL_64(nr, sym, qual) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
#include <asm/syscalls_64.h>
#undef __SYSCALL_64
-#define __SYSCALL_64(nr, sym, qual) [nr] = __SYSCALL_64_QUAL_##qual(sym),
+#define __SYSCALL_64(nr, sym, qual) [nr] = sym,
extern long sys_ni_syscall(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
The SYCALLL64 fast path was a nice, if small, optimization back in the good old days when syscalls were actually reasonably fast. Now we have PTI to slow everything down, and indirect branches are verboten, making everything messier. The retpoline code in the fast path was particularly nasty. Just get rid of the fast path. The slow path is barely slower. Signed-off-by: Andy Lutomirski <luto@kernel.org> --- This isn't quite identical to Linus' patch. I cleaned up the SYSCALL64 entry code to use all pushes rather than pushing all but 6 regs and moving the rest. arch/x86/entry/entry_64.S | 127 +++----------------------------------------- arch/x86/entry/syscall_64.c | 7 +-- 2 files changed, 9 insertions(+), 125 deletions(-)