| Message ID | 20180206131032.62271-1-bfoster@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Feb 06, 2018 at 08:10:32AM -0500, Brian Foster wrote: > The XFS rmapbt extent swap mechanism performs an extent by extent > swap to ensure the rmapbt is rectified with the appropriate extent > owner information after the operation. This implementation suffers > from a corner case that requires extra reservation if the swap > operation results in bouncing one of the associated inodes between > extent and btree formats. When this corner case occurs, it results > in a transaction block reservation overrun and possible corruption > of the free space accounting. > > This regression test provides coverage for this corner case. It > creates two files with a large enough extent count to require btree > format, regardless of inode size, and performs a sequence of extent > swaps between them with a decreasing extent count until all extents > are removed from the file(s). This ensures that one of the swaps > covers the btree <-> extent fork format boundary case. > > This test reproduces fs corruption on rmapbt enabled filesystems > running on kernels without the associated extent swap fix. > > Signed-off-by: Brian Foster <bfoster@redhat.com> > --- > > This test reproduces one of the problems targeted to be fixed by the > following patch series: > > https://marc.info/?l=linux-xfs&m=151785278525201&w=2 > > Also note that this test depends on currently unmerged xfs_io > functionality. The associated functionality is posted for review here: > > https://marc.info/?l=linux-xfs&m=151792224511355&w=2 > > ... and so this test should not be merged until/unless that > functionality is reviewed. Thanks. > > Brian > > tests/xfs/440 | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/xfs/440.out | 2 ++ > tests/xfs/group | 1 + > 3 files changed, 100 insertions(+) > create mode 100755 tests/xfs/440 > create mode 100644 tests/xfs/440.out > > diff --git a/tests/xfs/440 b/tests/xfs/440 > new file mode 100755 > index 00000000..c7667e08 > --- /dev/null > +++ b/tests/xfs/440 > @@ -0,0 +1,97 @@ > +#! /bin/bash > +# FS QA Test 440 > +# > +# Regression test for the XFS rmapbt based extent swap algorithm. The extent > +# swap algorithm for rmapbt=1 filesystems unmaps/remaps individual extents to > +# rectify the rmapbt for each extent swapped between inodes. If one of the > +# inodes happens to straddle the extent <-> btree format boundary (which can > +# vary depending on inode size), the unmap/remap sequence can bounce the inodes > +# back and forth between formats many times during the swap. Since extent -> > +# btree format conversion requires a block allocation, this can consume more > +# blocks than expected, lead to block reservation overrun and free space > +# accounting inconsistency. Yikes. :) <slightly ot here> TBH, I've long wondered a couple of things about the swapext code -- since the rmap version of it can swap extents between any kind of file, does it still make sense to return -EINVAL if the donor file has more extents than the source file? And do we have a use case for allowing extent swaps of parts of files? <ok, back to the test> > +# > +#----------------------------------------------------------------------- > +# Copyright (c) 2018 Red Hat, Inc. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +#----------------------------------------------------------------------- > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > + > +# remove previous $seqres.full before test > +rm -f $seqres.full > + > +# real QA test starts here > + > +# Modify as appropriate. > +_supported_fs generic > +_supported_os Linux > +_require_scratch > +_require_xfs_io_command "falloc" > +_require_xfs_io_command "fpunch" > +_require_xfs_io_command "swapext" > + > +_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" > +_scratch_mount || _fail "mount failed" Before we encode too many _scratch_mount || _fail, can we get a decision from the maintainer about whether or not _scratch_mount should just _fail if the mount doesn't work, instead of each test having to open-code this on its own? I see that 53 of the 1221 mentions of _scratch_mount already do _fail... > + > +file1=$SCRATCH_MNT/file1 > +file2=$SCRATCH_MNT/file2 > + > +# The goal is run an extent swap where one of the associated files has the > +# minimum number of extents to remain in btree format. First, create a couple > +# files with large enough extent counts to ensure btree format on the largest > +# possible inode size filesystems. > +for i in $(seq 0 199); do > + $XFS_IO_PROG -fc "falloc $((i * 8192)) 4k" $file1 > + $XFS_IO_PROG -fc "falloc $((i * 8192)) 4k" $file2 A 4k extent length isn't going to work on a fs with 64k blocks. I'd probably just do: blksz=65536 $XFS_IO_PROG -fc "falloc 0 $((400 * blksz))" $file1 src/punch_alternating $file1 > +done > + > +# Now run an extent swap at every possible extent count down to 0. Depending > +# on filesystem geometry (i.e., inode size), one of these swaps will cover the > +# boundary case between extent and btree format. > +for i in $(seq 0 199); do > + # punch one extent from the tmpfile and swap > + $XFS_IO_PROG -c "fpunch $((i * 8192)) 4k" $file2 > + $XFS_IO_PROG -c "swapext $file2" $file1 > + > + # punch the same extent from the old fork (now in file2) to resync the > + # extent counts and repeat > + $XFS_IO_PROG -c "fpunch $((i * 8192)) 4k" $file2 > +done > + > +# failure results in fs corruption and possible assert failure > +echo Silence is golden > + > +# success, all done > +status=0 > +exit > diff --git a/tests/xfs/440.out b/tests/xfs/440.out > new file mode 100644 > index 00000000..fb8dc21f > --- /dev/null > +++ b/tests/xfs/440.out > @@ -0,0 +1,2 @@ > +QA output created by 440 > +Silence is golden > diff --git a/tests/xfs/group b/tests/xfs/group > index cf81451d..ae0c5fc8 100644 > --- a/tests/xfs/group > +++ b/tests/xfs/group > @@ -437,3 +437,4 @@ > 437 auto quick other > 438 auto quick quota dangerous > 439 auto quick fuzzers log > +440 auto quick ioctl Though this isn't a fsr test per se, it does test a regression in the underlying ioctl, so maybe this should also be tagged group fsr? --D > -- > 2.13.6 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-xfs" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Feb 06, 2018 at 09:30:23AM -0800, Darrick J. Wong wrote: > On Tue, Feb 06, 2018 at 08:10:32AM -0500, Brian Foster wrote: > > The XFS rmapbt extent swap mechanism performs an extent by extent > > swap to ensure the rmapbt is rectified with the appropriate extent > > owner information after the operation. This implementation suffers > > from a corner case that requires extra reservation if the swap > > operation results in bouncing one of the associated inodes between > > extent and btree formats. When this corner case occurs, it results > > in a transaction block reservation overrun and possible corruption > > of the free space accounting. > > > > This regression test provides coverage for this corner case. It > > creates two files with a large enough extent count to require btree > > format, regardless of inode size, and performs a sequence of extent > > swaps between them with a decreasing extent count until all extents > > are removed from the file(s). This ensures that one of the swaps > > covers the btree <-> extent fork format boundary case. > > > > This test reproduces fs corruption on rmapbt enabled filesystems > > running on kernels without the associated extent swap fix. > > > > Signed-off-by: Brian Foster <bfoster@redhat.com> > > --- > > > > This test reproduces one of the problems targeted to be fixed by the > > following patch series: > > > > https://marc.info/?l=linux-xfs&m=151785278525201&w=2 > > > > Also note that this test depends on currently unmerged xfs_io > > functionality. The associated functionality is posted for review here: > > > > https://marc.info/?l=linux-xfs&m=151792224511355&w=2 > > > > ... and so this test should not be merged until/unless that > > functionality is reviewed. Thanks. > > > > Brian > > > > tests/xfs/440 | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > tests/xfs/440.out | 2 ++ > > tests/xfs/group | 1 + > > 3 files changed, 100 insertions(+) > > create mode 100755 tests/xfs/440 > > create mode 100644 tests/xfs/440.out > > > > diff --git a/tests/xfs/440 b/tests/xfs/440 > > new file mode 100755 > > index 00000000..c7667e08 > > --- /dev/null > > +++ b/tests/xfs/440 > > @@ -0,0 +1,97 @@ > > +#! /bin/bash > > +# FS QA Test 440 > > +# > > +# Regression test for the XFS rmapbt based extent swap algorithm. The extent > > +# swap algorithm for rmapbt=1 filesystems unmaps/remaps individual extents to > > +# rectify the rmapbt for each extent swapped between inodes. If one of the > > +# inodes happens to straddle the extent <-> btree format boundary (which can > > +# vary depending on inode size), the unmap/remap sequence can bounce the inodes > > +# back and forth between formats many times during the swap. Since extent -> > > +# btree format conversion requires a block allocation, this can consume more > > +# blocks than expected, lead to block reservation overrun and free space > > +# accounting inconsistency. > > Yikes. :) > > <slightly ot here> > > TBH, I've long wondered a couple of things about the swapext code -- > since the rmap version of it can swap extents between any kind of file, > does it still make sense to return -EINVAL if the donor file has more > extents than the source file? And do we have a use case for allowing > extent swaps of parts of files? > None that I'm aware of, but I haven't really thought that hard about it. :P > <ok, back to the test> > > > +# > > +#----------------------------------------------------------------------- > > +# Copyright (c) 2018 Red Hat, Inc. All Rights Reserved. > > +# > > +# This program is free software; you can redistribute it and/or > > +# modify it under the terms of the GNU General Public License as > > +# published by the Free Software Foundation. > > +# > > +# This program is distributed in the hope that it would be useful, > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > +# GNU General Public License for more details. > > +# > > +# You should have received a copy of the GNU General Public License > > +# along with this program; if not, write the Free Software Foundation, > > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > > +#----------------------------------------------------------------------- > > +# > > + > > +seq=`basename $0` > > +seqres=$RESULT_DIR/$seq > > +echo "QA output created by $seq" > > + > > +here=`pwd` > > +tmp=/tmp/$$ > > +status=1 # failure is the default! > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > + > > +_cleanup() > > +{ > > + cd / > > + rm -f $tmp.* > > +} > > + > > +# get standard environment, filters and checks > > +. ./common/rc > > +. ./common/filter > > + > > +# remove previous $seqres.full before test > > +rm -f $seqres.full > > + > > +# real QA test starts here > > + > > +# Modify as appropriate. > > +_supported_fs generic > > +_supported_os Linux > > +_require_scratch > > +_require_xfs_io_command "falloc" > > +_require_xfs_io_command "fpunch" > > +_require_xfs_io_command "swapext" > > + > > +_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" > > +_scratch_mount || _fail "mount failed" > > Before we encode too many _scratch_mount || _fail, can we get a decision > from the maintainer about whether or not _scratch_mount should just > _fail if the mount doesn't work, instead of each test having to > open-code this on its own? > I'd probably leave it around until a patch hits, regardless. It's easy to remove if a _scratch_mount() fix lands in the meantime. > I see that 53 of the 1221 mentions of _scratch_mount already do _fail... > > > + > > +file1=$SCRATCH_MNT/file1 > > +file2=$SCRATCH_MNT/file2 > > + > > +# The goal is run an extent swap where one of the associated files has the > > +# minimum number of extents to remain in btree format. First, create a couple > > +# files with large enough extent counts to ensure btree format on the largest > > +# possible inode size filesystems. > > +for i in $(seq 0 199); do > > + $XFS_IO_PROG -fc "falloc $((i * 8192)) 4k" $file1 > > + $XFS_IO_PROG -fc "falloc $((i * 8192)) 4k" $file2 > > A 4k extent length isn't going to work on a fs with 64k blocks. I'd > probably just do: > > blksz=65536 > $XFS_IO_PROG -fc "falloc 0 $((400 * blksz))" $file1 > src/punch_alternating $file1 > Indeed, I didn't know about punch_alternating. I suppose we can also get the actual filesystem block size from the filtered mkfs output as well. > > +done > > + > > +# Now run an extent swap at every possible extent count down to 0. Depending > > +# on filesystem geometry (i.e., inode size), one of these swaps will cover the > > +# boundary case between extent and btree format. > > +for i in $(seq 0 199); do > > + # punch one extent from the tmpfile and swap > > + $XFS_IO_PROG -c "fpunch $((i * 8192)) 4k" $file2 > > + $XFS_IO_PROG -c "swapext $file2" $file1 > > + > > + # punch the same extent from the old fork (now in file2) to resync the > > + # extent counts and repeat > > + $XFS_IO_PROG -c "fpunch $((i * 8192)) 4k" $file2 > > +done > > + > > +# failure results in fs corruption and possible assert failure > > +echo Silence is golden > > + > > +# success, all done > > +status=0 > > +exit > > diff --git a/tests/xfs/440.out b/tests/xfs/440.out > > new file mode 100644 > > index 00000000..fb8dc21f > > --- /dev/null > > +++ b/tests/xfs/440.out > > @@ -0,0 +1,2 @@ > > +QA output created by 440 > > +Silence is golden > > diff --git a/tests/xfs/group b/tests/xfs/group > > index cf81451d..ae0c5fc8 100644 > > --- a/tests/xfs/group > > +++ b/tests/xfs/group > > @@ -437,3 +437,4 @@ > > 437 auto quick other > > 438 auto quick quota dangerous > > 439 auto quick fuzzers log > > +440 auto quick ioctl > > Though this isn't a fsr test per se, it does test a regression in the > underlying ioctl, so maybe this should also be tagged group fsr? > No preference. I suppose it does make sense if one wanted to verify a kernel was "fsr safe." I'll add it. Brian > --D > > > -- > > 2.13.6 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-xfs" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Feb 06, 2018 at 09:30:23AM -0800, Darrick J. Wong wrote: > On Tue, Feb 06, 2018 at 08:10:32AM -0500, Brian Foster wrote: > > The XFS rmapbt extent swap mechanism performs an extent by extent > > swap to ensure the rmapbt is rectified with the appropriate extent > > owner information after the operation. This implementation suffers > > from a corner case that requires extra reservation if the swap > > operation results in bouncing one of the associated inodes between > > extent and btree formats. When this corner case occurs, it results > > in a transaction block reservation overrun and possible corruption > > of the free space accounting. > > > > This regression test provides coverage for this corner case. It > > creates two files with a large enough extent count to require btree > > format, regardless of inode size, and performs a sequence of extent > > swaps between them with a decreasing extent count until all extents > > are removed from the file(s). This ensures that one of the swaps > > covers the btree <-> extent fork format boundary case. > > > > This test reproduces fs corruption on rmapbt enabled filesystems > > running on kernels without the associated extent swap fix. > > > > Signed-off-by: Brian Foster <bfoster@redhat.com> > > --- > > > > This test reproduces one of the problems targeted to be fixed by the > > following patch series: > > > > https://marc.info/?l=linux-xfs&m=151785278525201&w=2 > > > > Also note that this test depends on currently unmerged xfs_io > > functionality. The associated functionality is posted for review here: > > > > https://marc.info/?l=linux-xfs&m=151792224511355&w=2 > > > > ... and so this test should not be merged until/unless that > > functionality is reviewed. Thanks. > > > > Brian > > > > tests/xfs/440 | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > tests/xfs/440.out | 2 ++ > > tests/xfs/group | 1 + > > 3 files changed, 100 insertions(+) > > create mode 100755 tests/xfs/440 > > create mode 100644 tests/xfs/440.out > > > > diff --git a/tests/xfs/440 b/tests/xfs/440 > > new file mode 100755 > > index 00000000..c7667e08 > > --- /dev/null > > +++ b/tests/xfs/440 > > @@ -0,0 +1,97 @@ > > +#! /bin/bash > > +# FS QA Test 440 > > +# > > +# Regression test for the XFS rmapbt based extent swap algorithm. The extent > > +# swap algorithm for rmapbt=1 filesystems unmaps/remaps individual extents to > > +# rectify the rmapbt for each extent swapped between inodes. If one of the > > +# inodes happens to straddle the extent <-> btree format boundary (which can > > +# vary depending on inode size), the unmap/remap sequence can bounce the inodes > > +# back and forth between formats many times during the swap. Since extent -> > > +# btree format conversion requires a block allocation, this can consume more > > +# blocks than expected, lead to block reservation overrun and free space > > +# accounting inconsistency. > > Yikes. :) > > <slightly ot here> > > TBH, I've long wondered a couple of things about the swapext code -- > since the rmap version of it can swap extents between any kind of file, > does it still make sense to return -EINVAL if the donor file has more > extents than the source file? And do we have a use case for allowing > extent swaps of parts of files? > > <ok, back to the test> > > > +# > > +#----------------------------------------------------------------------- > > +# Copyright (c) 2018 Red Hat, Inc. All Rights Reserved. > > +# > > +# This program is free software; you can redistribute it and/or > > +# modify it under the terms of the GNU General Public License as > > +# published by the Free Software Foundation. > > +# > > +# This program is distributed in the hope that it would be useful, > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > +# GNU General Public License for more details. > > +# > > +# You should have received a copy of the GNU General Public License > > +# along with this program; if not, write the Free Software Foundation, > > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > > +#----------------------------------------------------------------------- > > +# > > + > > +seq=`basename $0` > > +seqres=$RESULT_DIR/$seq > > +echo "QA output created by $seq" > > + > > +here=`pwd` > > +tmp=/tmp/$$ > > +status=1 # failure is the default! > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > + > > +_cleanup() > > +{ > > + cd / > > + rm -f $tmp.* > > +} > > + > > +# get standard environment, filters and checks > > +. ./common/rc > > +. ./common/filter > > + > > +# remove previous $seqres.full before test > > +rm -f $seqres.full > > + > > +# real QA test starts here > > + > > +# Modify as appropriate. > > +_supported_fs generic > > +_supported_os Linux > > +_require_scratch > > +_require_xfs_io_command "falloc" > > +_require_xfs_io_command "fpunch" > > +_require_xfs_io_command "swapext" > > + > > +_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" > > +_scratch_mount || _fail "mount failed" > > Before we encode too many _scratch_mount || _fail, can we get a decision > from the maintainer about whether or not _scratch_mount should just > _fail if the mount doesn't work, instead of each test having to > open-code this on its own? > > I see that 53 of the 1221 mentions of _scratch_mount already do _fail... Sorry for not responding to the check _scratch_mount status issue early. I'm fine with it overall, as more people are running into this problem and get annoyed by the implicit failures. I just wanted to think more about it and see what would be the better way to do this. And Ted complained about not checking return status _scratch_mkfs and similar functions a month ago, I think we can fix them all together. Thanks, Eryu -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/tests/xfs/440 b/tests/xfs/440 new file mode 100755 index 00000000..c7667e08 --- /dev/null +++ b/tests/xfs/440 @@ -0,0 +1,97 @@ +#! /bin/bash +# FS QA Test 440 +# +# Regression test for the XFS rmapbt based extent swap algorithm. The extent +# swap algorithm for rmapbt=1 filesystems unmaps/remaps individual extents to +# rectify the rmapbt for each extent swapped between inodes. If one of the +# inodes happens to straddle the extent <-> btree format boundary (which can +# vary depending on inode size), the unmap/remap sequence can bounce the inodes +# back and forth between formats many times during the swap. Since extent -> +# btree format conversion requires a block allocation, this can consume more +# blocks than expected, lead to block reservation overrun and free space +# accounting inconsistency. +# +#----------------------------------------------------------------------- +# Copyright (c) 2018 Red Hat, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +# Modify as appropriate. +_supported_fs generic +_supported_os Linux +_require_scratch +_require_xfs_io_command "falloc" +_require_xfs_io_command "fpunch" +_require_xfs_io_command "swapext" + +_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" +_scratch_mount || _fail "mount failed" + +file1=$SCRATCH_MNT/file1 +file2=$SCRATCH_MNT/file2 + +# The goal is run an extent swap where one of the associated files has the +# minimum number of extents to remain in btree format. First, create a couple +# files with large enough extent counts to ensure btree format on the largest +# possible inode size filesystems. +for i in $(seq 0 199); do + $XFS_IO_PROG -fc "falloc $((i * 8192)) 4k" $file1 + $XFS_IO_PROG -fc "falloc $((i * 8192)) 4k" $file2 +done + +# Now run an extent swap at every possible extent count down to 0. Depending +# on filesystem geometry (i.e., inode size), one of these swaps will cover the +# boundary case between extent and btree format. +for i in $(seq 0 199); do + # punch one extent from the tmpfile and swap + $XFS_IO_PROG -c "fpunch $((i * 8192)) 4k" $file2 + $XFS_IO_PROG -c "swapext $file2" $file1 + + # punch the same extent from the old fork (now in file2) to resync the + # extent counts and repeat + $XFS_IO_PROG -c "fpunch $((i * 8192)) 4k" $file2 +done + +# failure results in fs corruption and possible assert failure +echo Silence is golden + +# success, all done +status=0 +exit diff --git a/tests/xfs/440.out b/tests/xfs/440.out new file mode 100644 index 00000000..fb8dc21f --- /dev/null +++ b/tests/xfs/440.out @@ -0,0 +1,2 @@ +QA output created by 440 +Silence is golden diff --git a/tests/xfs/group b/tests/xfs/group index cf81451d..ae0c5fc8 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -437,3 +437,4 @@ 437 auto quick other 438 auto quick quota dangerous 439 auto quick fuzzers log +440 auto quick ioctl
The XFS rmapbt extent swap mechanism performs an extent by extent swap to ensure the rmapbt is rectified with the appropriate extent owner information after the operation. This implementation suffers from a corner case that requires extra reservation if the swap operation results in bouncing one of the associated inodes between extent and btree formats. When this corner case occurs, it results in a transaction block reservation overrun and possible corruption of the free space accounting. This regression test provides coverage for this corner case. It creates two files with a large enough extent count to require btree format, regardless of inode size, and performs a sequence of extent swaps between them with a decreasing extent count until all extents are removed from the file(s). This ensures that one of the swaps covers the btree <-> extent fork format boundary case. This test reproduces fs corruption on rmapbt enabled filesystems running on kernels without the associated extent swap fix. Signed-off-by: Brian Foster <bfoster@redhat.com> --- This test reproduces one of the problems targeted to be fixed by the following patch series: https://marc.info/?l=linux-xfs&m=151785278525201&w=2 Also note that this test depends on currently unmerged xfs_io functionality. The associated functionality is posted for review here: https://marc.info/?l=linux-xfs&m=151792224511355&w=2 ... and so this test should not be merged until/unless that functionality is reviewed. Thanks. Brian tests/xfs/440 | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/440.out | 2 ++ tests/xfs/group | 1 + 3 files changed, 100 insertions(+) create mode 100755 tests/xfs/440 create mode 100644 tests/xfs/440.out