| Message ID | 20180205172110.9897-2-s.nawrocki@samsung.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Mon, Feb 5, 2018 at 6:21 PM, Sylwester Nawrocki <s.nawrocki@samsung.com> wrote: > This patch updates the sound node of the exynos5433-tm2 board > and adds clock tree configuration in order to support HDMI sound. > > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > --- > .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 67 ++++++++++++++++++++-- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1 + > 2 files changed, 64 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi > index a77462da4a36..37fb477a2d23 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi > @@ -14,6 +14,7 @@ > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/input/input.h> > #include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/sound/samsung-i2s.h> > > / { > aliases { > @@ -112,8 +113,8 @@ > > sound { > compatible = "samsung,tm2-audio"; > - audio-codec = <&wm5110>; > - i2s-controller = <&i2s0>; > + audio-codec = <&wm5110>, <&hdmi>; > + i2s-controller = <&i2s0 0>, <&i2s1 0>; > audio-amplifier = <&max98504>; > mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; > model = "wm5110"; > @@ -216,9 +217,63 @@ > status = "okay"; > }; > > +&cmu_top { > + assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>; > + assigned-clock-rates = <(196608009 + 1)>; > +}; > + > &cmu_aud { > - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; > - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; > + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>, > + <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>, > + <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>, > + <&cmu_top CLK_MOUT_AUD_PLL>, > + > + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, > + <&cmu_top CLK_MOUT_SCLK_AUDIO0>, > + <&cmu_top CLK_MOUT_SCLK_AUDIO1>, > + <&cmu_top CLK_MOUT_SCLK_SPDIF>, > + > + <&cmu_aud CLK_DIV_AUD_CA5>, > + <&cmu_aud CLK_DIV_ACLK_AUD>, > + <&cmu_aud CLK_DIV_PCLK_DBG_AUD>, > + <&cmu_aud CLK_DIV_SCLK_AUD_I2S>, > + <&cmu_aud CLK_DIV_SCLK_AUD_PCM>, > + <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>, > + <&cmu_aud CLK_DIV_SCLK_AUD_UART>, > + > + <&cmu_top CLK_DIV_SCLK_AUDIO0>, > + <&cmu_top CLK_DIV_SCLK_AUDIO1>, > + <&cmu_top CLK_DIV_SCLK_PCM1>, > + <&cmu_top CLK_DIV_SCLK_I2S1>; > + > + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>, > + <&cmu_aud CLK_MOUT_AUD_PLL_USER>, > + <&cmu_aud CLK_MOUT_AUD_PLL_USER>, > + <&cmu_top CLK_FOUT_AUD_PLL>, > + > + <&cmu_top CLK_MOUT_AUD_PLL>, > + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, > + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, > + <&cmu_top CLK_SCLK_AUDIO0>; > + > + assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, > + <(196608009 + 1)>, > + <((196608009 / 3) + 1)>, > + <((196608009 / 6) + 1)>, > + <((196608009 / 4) + 1)>, > + <((196608009 / 96) + 1)>, > + <((196608009 / 8) + 1)>, > + <(196608010 + 1)>, > + > + <((196608009 / 8) + 1)>, > + <((196608009 / 2) + 1)>, > + <((196608009 / 96) + 1)>, > + <((196608009 / 4) + 1)>; > +}; > + > +&i2s1 { Please move it further to i2s1 so all the nodes/labels will be ordered alphabetically. As with #1 I understand that there is no explicit dependency so please correct me if I am wrong. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/06/2018 02:14 PM, Krzysztof Kozlowski wrote: > Please move it further to i2s1 so all the nodes/labels will be ordered > alphabetically. As with #1 I understand that there is no explicit > dependency so please correct me if I am wrong. Yes, there is no dependency, the only side effect will that the newly introduced ALSA PCM device for the HDMI port will not work until this patch is applied.
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index a77462da4a36..37fb477a2d23 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/sound/samsung-i2s.h> / { aliases { @@ -112,8 +113,8 @@ sound { compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>; - i2s-controller = <&i2s0>; + audio-codec = <&wm5110>, <&hdmi>; + i2s-controller = <&i2s0 0>, <&i2s1 0>; audio-amplifier = <&max98504>; mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; model = "wm5110"; @@ -216,9 +217,63 @@ status = "okay"; }; +&cmu_top { + assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>; + assigned-clock-rates = <(196608009 + 1)>; +}; + &cmu_aud { - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>, + <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>, + <&cmu_top CLK_MOUT_AUD_PLL>, + + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_MOUT_SCLK_AUDIO0>, + <&cmu_top CLK_MOUT_SCLK_AUDIO1>, + <&cmu_top CLK_MOUT_SCLK_SPDIF>, + + <&cmu_aud CLK_DIV_AUD_CA5>, + <&cmu_aud CLK_DIV_ACLK_AUD>, + <&cmu_aud CLK_DIV_PCLK_DBG_AUD>, + <&cmu_aud CLK_DIV_SCLK_AUD_I2S>, + <&cmu_aud CLK_DIV_SCLK_AUD_PCM>, + <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>, + <&cmu_aud CLK_DIV_SCLK_AUD_UART>, + + <&cmu_top CLK_DIV_SCLK_AUDIO0>, + <&cmu_top CLK_DIV_SCLK_AUDIO1>, + <&cmu_top CLK_DIV_SCLK_PCM1>, + <&cmu_top CLK_DIV_SCLK_I2S1>; + + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>, + <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_top CLK_FOUT_AUD_PLL>, + + <&cmu_top CLK_MOUT_AUD_PLL>, + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_SCLK_AUDIO0>; + + assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, + <(196608009 + 1)>, + <((196608009 / 3) + 1)>, + <((196608009 / 6) + 1)>, + <((196608009 / 4) + 1)>, + <((196608009 / 96) + 1)>, + <((196608009 / 8) + 1)>, + <(196608010 + 1)>, + + <((196608009 / 8) + 1)>, + <((196608009 / 2) + 1)>, + <((196608009 / 96) + 1)>, + <((196608009 / 4) + 1)>; +}; + +&i2s1 { + assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>; }; &cmu_fsys { @@ -838,6 +893,10 @@ status = "okay"; }; +&i2s1 { + status = "okay"; +}; + &mshc_0 { status = "okay"; mmc-hs200-1_8v; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 2b73bd86bc56..c0231d077fa6 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -969,6 +969,7 @@ ddc = <&hsi2c_11>; samsung,syscon-phandle = <&pmu_system_controller>; samsung,sysreg-phandle = <&syscon_disp>; + #sound-dai-cells = <0>; status = "disabled"; };
This patch updates the sound node of the exynos5433-tm2 board and adds clock tree configuration in order to support HDMI sound. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> --- .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 67 ++++++++++++++++++++-- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1 + 2 files changed, 64 insertions(+), 4 deletions(-)