Message ID | 1518053328-34687-18-git-send-email-mjc@sifive.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thu, 8 Feb 2018 14:28:42 +1300 Michael Clark <mjc@sifive.com> wrote: > RISC-V machine with device-tree, 16550a UART and VirtIO MMIO. > The following machine is implemented: > > - 'virt'; CLINT, PLIC, 16550A UART, VirtIO MMIO, device-tree > > Signed-off-by: Michael Clark <mjc@sifive.com> > --- > hw/riscv/virt.c | 375 ++++++++++++++++++++++++++++++++++++++++++++++++ > include/hw/riscv/virt.h | 74 ++++++++++ > 2 files changed, 449 insertions(+) > create mode 100644 hw/riscv/virt.c > create mode 100644 include/hw/riscv/virt.h > > diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c > new file mode 100644 > index 0000000..46d95b2 > --- /dev/null > +++ b/hw/riscv/virt.c > @@ -0,0 +1,375 @@ > +/* > + * QEMU RISC-V VirtIO Board > + * > + * Copyright (c) 2017 SiFive, Inc. > + * > + * RISC-V machine with 16550a UART and VirtIO MMIO > + * > + * Permission is hereby granted, free of charge, to any person obtaining a copy > + * of this software and associated documentation files (the "Software"), to deal > + * in the Software without restriction, including without limitation the rights > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell > + * copies of the Software, and to permit persons to whom the Software is > + * furnished to do so, subject to the following conditions: > + * > + * The above copyright notice and this permission notice shall be included in > + * all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN > + * THE SOFTWARE. > + */ > + > +#include "qemu/osdep.h" > +#include "qemu/log.h" > +#include "qemu/error-report.h" > +#include "hw/hw.h" > +#include "hw/boards.h" > +#include "hw/loader.h" > +#include "hw/sysbus.h" > +#include "hw/char/serial.h" > +#include "target/riscv/cpu.h" > +#include "hw/riscv/riscv_htif.h" > +#include "hw/riscv/riscv_hart.h" > +#include "hw/riscv/sifive_plic.h" > +#include "hw/riscv/sifive_clint.h" > +#include "hw/riscv/sifive_test.h" > +#include "hw/riscv/virt.h" > +#include "chardev/char.h" > +#include "sysemu/arch_init.h" > +#include "sysemu/device_tree.h" > +#include "exec/address-spaces.h" > +#include "elf.h" > + > +static const struct MemmapEntry { > + hwaddr base; > + hwaddr size; > +} virt_memmap[] = { > + [VIRT_DEBUG] = { 0x0, 0x100 }, > + [VIRT_MROM] = { 0x1000, 0x2000 }, > + [VIRT_TEST] = { 0x4000, 0x1000 }, > + [VIRT_CLINT] = { 0x2000000, 0x10000 }, > + [VIRT_PLIC] = { 0xc000000, 0x4000000 }, > + [VIRT_UART0] = { 0x10000000, 0x100 }, > + [VIRT_VIRTIO] = { 0x10001000, 0x1000 }, > + [VIRT_DRAM] = { 0x80000000, 0x0 }, > +}; > + > +static uint64_t identity_translate(void *opaque, uint64_t addr) > +{ > + return addr; > +} > + > +static uint64_t load_kernel(const char *kernel_filename) > +{ > + uint64_t kernel_entry, kernel_high; > + > + if (load_elf(kernel_filename, identity_translate, NULL, > + &kernel_entry, NULL, &kernel_high, > + 0, ELF_MACHINE, 1, 0) < 0) { > + error_report("qemu: could not load kernel '%s'", kernel_filename); > + exit(1); > + } > + return kernel_entry; > +} > + > +static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, > + uint64_t mem_size, const char *cmdline) > +{ > + void *fdt; > + int cpu; > + uint32_t *cells; > + char *nodename; > + uint32_t plic_phandle, phandle = 1; > + int i; > + > + fdt = s->fdt = create_device_tree(&s->fdt_size); > + if (!fdt) { > + error_report("create_device_tree() failed"); > + exit(1); > + } > + > + qemu_fdt_setprop_string(fdt, "/", "model", "riscv-virtio,qemu"); > + qemu_fdt_setprop_string(fdt, "/", "compatible", "riscv-virtio"); > + qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); > + qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); > + > + qemu_fdt_add_subnode(fdt, "/soc"); > + qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0); > + qemu_fdt_setprop_string(fdt, "/soc", "compatible", "riscv-virtio-soc"); > + qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2); > + qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2); > + > + nodename = g_strdup_printf("/memory@%lx", > + (long)memmap[VIRT_DRAM].base); > + qemu_fdt_add_subnode(fdt, nodename); > + qemu_fdt_setprop_cells(fdt, nodename, "reg", > + memmap[VIRT_DRAM].base >> 32, memmap[VIRT_DRAM].base, > + mem_size >> 32, mem_size); > + qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); > + g_free(nodename); > + > + qemu_fdt_add_subnode(fdt, "/cpus"); > + qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency", 10000000); > + qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0); > + qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1); > + > + for (cpu = s->soc.num_harts - 1; cpu >= 0; cpu--) { > + int cpu_phandle = phandle++; > + nodename = g_strdup_printf("/cpus/cpu@%d", cpu); > + char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); > + char *isa = riscv_isa_string(&s->soc.harts[cpu]); > + qemu_fdt_add_subnode(fdt, nodename); > + qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 1000000000); > + qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); > + qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa); > + qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv"); > + qemu_fdt_setprop_string(fdt, nodename, "status", "okay"); > + qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu); > + qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu"); > + qemu_fdt_add_subnode(fdt, intc); > + qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle); > + qemu_fdt_setprop_cell(fdt, intc, "linux,phandle", cpu_phandle); > + qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc"); > + qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0); > + qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1); > + g_free(isa); > + g_free(intc); > + g_free(nodename); > + } > + > + cells = g_new0(uint32_t, s->soc.num_harts * 4); > + for (cpu = 0; cpu < s->soc.num_harts; cpu++) { > + nodename = > + g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); > + uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); > + cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); > + cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT); > + cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); > + cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER); > + g_free(nodename); > + } > + nodename = g_strdup_printf("/soc/clint@%lx", > + (long)memmap[VIRT_CLINT].base); > + qemu_fdt_add_subnode(fdt, nodename); > + qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,clint0"); > + qemu_fdt_setprop_cells(fdt, nodename, "reg", > + 0x0, memmap[VIRT_CLINT].base, > + 0x0, memmap[VIRT_CLINT].size); > + qemu_fdt_setprop(fdt, nodename, "interrupts-extended", > + cells, s->soc.num_harts * sizeof(uint32_t) * 4); > + g_free(cells); > + g_free(nodename); > + > + plic_phandle = phandle++; > + cells = g_new0(uint32_t, s->soc.num_harts * 4); > + for (cpu = 0; cpu < s->soc.num_harts; cpu++) { > + nodename = > + g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); > + uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); > + cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); > + cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_EXT); > + cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); > + cells[cpu * 4 + 3] = cpu_to_be32(IRQ_S_EXT); > + g_free(nodename); > + } > + nodename = g_strdup_printf("/soc/interrupt-controller@%lx", > + (long)memmap[VIRT_PLIC].base); > + qemu_fdt_add_subnode(fdt, nodename); > + qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1); > + qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0"); > + qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); > + qemu_fdt_setprop(fdt, nodename, "interrupts-extended", > + cells, s->soc.num_harts * sizeof(uint32_t) * 4); > + qemu_fdt_setprop_cells(fdt, nodename, "reg", > + 0x0, memmap[VIRT_PLIC].base, > + 0x0, memmap[VIRT_PLIC].size); > + qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control"); > + qemu_fdt_setprop_cell(fdt, nodename, "riscv,max-priority", 7); > + qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", VIRTIO_NDEV); > + qemu_fdt_setprop_cells(fdt, nodename, "phandle", plic_phandle); > + qemu_fdt_setprop_cells(fdt, nodename, "linux,phandle", plic_phandle); > + plic_phandle = qemu_fdt_get_phandle(fdt, nodename); > + g_free(cells); > + g_free(nodename); > + > + for (i = 0; i < VIRTIO_COUNT; i++) { > + nodename = g_strdup_printf("/virtio_mmio@%lx", > + (long)(memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size)); > + qemu_fdt_add_subnode(fdt, nodename); > + qemu_fdt_setprop_string(fdt, nodename, "compatible", "virtio,mmio"); > + qemu_fdt_setprop_cells(fdt, nodename, "reg", > + 0x0, memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, > + 0x0, memmap[VIRT_VIRTIO].size); > + qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle); > + qemu_fdt_setprop_cells(fdt, nodename, "interrupts", VIRTIO_IRQ + i); > + g_free(nodename); > + } > + > + nodename = g_strdup_printf("/test@%lx", > + (long)memmap[VIRT_TEST].base); > + qemu_fdt_add_subnode(fdt, nodename); > + qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,test0"); > + qemu_fdt_setprop_cells(fdt, nodename, "reg", > + 0x0, memmap[VIRT_TEST].base, > + 0x0, memmap[VIRT_TEST].size); > + > + nodename = g_strdup_printf("/uart@%lx", > + (long)memmap[VIRT_UART0].base); > + qemu_fdt_add_subnode(fdt, nodename); > + qemu_fdt_setprop_string(fdt, nodename, "compatible", "ns16550a"); > + qemu_fdt_setprop_cells(fdt, nodename, "reg", > + 0x0, memmap[VIRT_UART0].base, > + 0x0, memmap[VIRT_UART0].size); > + qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 3686400); > + qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle); > + qemu_fdt_setprop_cells(fdt, nodename, "interrupts", UART0_IRQ); > + > + qemu_fdt_add_subnode(fdt, "/chosen"); > + qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename); > + qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline); > + g_free(nodename); > +} > + > +static void riscv_virt_board_init(MachineState *machine) > +{ > + const struct MemmapEntry *memmap = virt_memmap; > + > + RISCVVirtState *s = g_new0(RISCVVirtState, 1); > + MemoryRegion *system_memory = get_system_memory(); > + MemoryRegion *main_mem = g_new(MemoryRegion, 1); > + MemoryRegion *boot_rom = g_new(MemoryRegion, 1); > + char *plic_hart_config; > + size_t plic_hart_config_len; > + int i; > + > + /* Initialize SOC */ > + object_initialize(&s->soc, sizeof(s->soc), TYPE_RISCV_HART_ARRAY); > + object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc), > + &error_abort); > + object_property_set_str(OBJECT(&s->soc), TYPE_RISCV_CPU_IMAFDCSU_PRIV_1_10, > + "cpu-type", &error_abort); Consensus seems to be that we should create concrete types of SoC instead of making board to configure it, like aspeed_soc.c > + object_property_set_int(OBJECT(&s->soc), smp_cpus, "num-harts", > + &error_abort); > + object_property_set_bool(OBJECT(&s->soc), true, "realized", > + &error_abort); > + > + /* register system main memory (actual RAM) */ > + memory_region_init_ram(main_mem, NULL, "riscv_virt_board.ram", > + machine->ram_size, &error_fatal); > + memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base, > + main_mem); > + > + /* create device tree */ > + create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline); > + > + /* boot rom */ > + memory_region_init_ram(boot_rom, NULL, "riscv_virt_board.bootrom", > + s->fdt_size + 0x2000, &error_fatal); > + memory_region_add_subregion(system_memory, 0x0, boot_rom); > + > + if (machine->kernel_filename) { > + load_kernel(machine->kernel_filename); > + } > + > + /* reset vector */ > + uint32_t reset_vec[8] = { > + 0x00000297, /* 1: auipc t0, %pcrel_hi(dtb) */ > + 0x02028593, /* addi a1, t0, %pcrel_lo(1b) */ > + 0xf1402573, /* csrr a0, mhartid */ > +#if defined(TARGET_RISCV32) > + 0x0182a283, /* lw t0, 24(t0) */ > +#elif defined(TARGET_RISCV64) > + 0x0182b283, /* ld t0, 24(t0) */ > +#endif > + 0x00028067, /* jr t0 */ > + 0x00000000, > + memmap[VIRT_DRAM].base, /* start: .dword memmap[VIRT_DRAM].base */ > + 0x00000000, > + /* dtb: */ > + }; > + > + /* copy in the reset vector */ > + cpu_physical_memory_write(ROM_BASE, reset_vec, sizeof(reset_vec)); > + > + /* copy in the device tree */ > + qemu_fdt_dumpdtb(s->fdt, s->fdt_size); > + cpu_physical_memory_write(ROM_BASE + sizeof(reset_vec), > + s->fdt, s->fdt_size); > + > + /* create PLIC hart topology configuration string */ > + plic_hart_config_len = (strlen(VIRT_PLIC_HART_CONFIG) + 1) * smp_cpus; > + plic_hart_config = g_malloc0(plic_hart_config_len); > + for (i = 0; i < smp_cpus; i++) { > + if (i != 0) { > + strncat(plic_hart_config, ",", plic_hart_config_len); > + } > + strncat(plic_hart_config, VIRT_PLIC_HART_CONFIG, plic_hart_config_len); > + plic_hart_config_len -= (strlen(VIRT_PLIC_HART_CONFIG) + 1); > + } > + > + /* MMIO */ > + s->plic = sifive_plic_create(memmap[VIRT_PLIC].base, > + plic_hart_config, > + VIRT_PLIC_NUM_SOURCES, > + VIRT_PLIC_NUM_PRIORITIES, > + VIRT_PLIC_PRIORITY_BASE, > + VIRT_PLIC_PENDING_BASE, > + VIRT_PLIC_ENABLE_BASE, > + VIRT_PLIC_ENABLE_STRIDE, > + VIRT_PLIC_CONTEXT_BASE, > + VIRT_PLIC_CONTEXT_STRIDE, > + memmap[VIRT_PLIC].size); > + sifive_clint_create(memmap[VIRT_CLINT].base, > + memmap[VIRT_CLINT].size, smp_cpus, > + SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE); > + sifive_test_create(memmap[VIRT_TEST].base); > + > + for (i = 0; i < VIRTIO_COUNT; i++) { > + sysbus_create_simple("virtio-mmio", > + memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, > + SIFIVE_PLIC(s->plic)->irqs[VIRTIO_IRQ + i]); > + } > + > + serial_mm_init(system_memory, memmap[VIRT_UART0].base, > + 0, SIFIVE_PLIC(s->plic)->irqs[UART0_IRQ], 399193, > + serial_hds[0], DEVICE_LITTLE_ENDIAN); > +} > + > +static int riscv_virt_board_sysbus_device_init(SysBusDevice *sysbusdev) > +{ > + return 0; > +} > + > +static void riscv_virt_board_class_init(ObjectClass *klass, void *data) > +{ > + SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); > + k->init = riscv_virt_board_sysbus_device_init; > +} > + > +static const TypeInfo riscv_virt_board_device = { > + .name = TYPE_RISCV_VIRT_BOARD, > + .parent = TYPE_SYS_BUS_DEVICE, > + .instance_size = sizeof(RISCVVirtState), > + .class_init = riscv_virt_board_class_init, > +}; > + > +static void riscv_virt_board_machine_init(MachineClass *mc) > +{ > + mc->desc = "RISC-V VirtIO Board (Privileged spec v1.10)"; > + mc->init = riscv_virt_board_init; > + mc->max_cpus = 8; /* hardcoded limit in BBL */ > +} > + > +DEFINE_MACHINE("virt", riscv_virt_board_machine_init) > + > +static void riscv_virt_board_register_types(void) > +{ > + type_register_static(&riscv_virt_board_device); > +} > + > +type_init(riscv_virt_board_register_types); > diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h > new file mode 100644 > index 0000000..024a09f > --- /dev/null > +++ b/include/hw/riscv/virt.h > @@ -0,0 +1,74 @@ > +/* > + * SiFive VirtIO Board > + * > + * Copyright (c) 2017 SiFive, Inc. > + * > + * Permission is hereby granted, free of charge, to any person obtaining a copy > + * of this software and associated documentation files (the "Software"), to deal > + * in the Software without restriction, including without limitation the rights > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell > + * copies of the Software, and to permit persons to whom the Software is > + * furnished to do so, subject to the following conditions: > + * > + * The above copyright notice and this permission notice shall be included in > + * all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN > + * THE SOFTWARE. > + */ > + > +#ifndef HW_VIRT_H > +#define HW_VIRT_H > + > +#define TYPE_RISCV_VIRT_BOARD "riscv.virt" > +#define VIRT(obj) \ > + OBJECT_CHECK(RISCVVirtState, (obj), TYPE_RISCV_VIRT_BOARD) > + > +enum { ROM_BASE = 0x1000 }; > + > +typedef struct { > + /*< private >*/ > + SysBusDevice parent_obj; > + > + /*< public >*/ > + RISCVHartArrayState soc; > + DeviceState *plic; > + void *fdt; > + int fdt_size; > +} RISCVVirtState; > + > +enum { > + VIRT_DEBUG, > + VIRT_MROM, > + VIRT_TEST, > + VIRT_CLINT, > + VIRT_PLIC, > + VIRT_UART0, > + VIRT_VIRTIO, > + VIRT_DRAM > +}; > + > + > +enum { > + UART0_IRQ = 10, > + VIRTIO_IRQ = 1, /* 1 to 8 */ > + VIRTIO_COUNT = 8, > + VIRTIO_NDEV = 10 > +}; > + > +#define VIRT_PLIC_HART_CONFIG "MS" > +#define VIRT_PLIC_NUM_SOURCES 127 > +#define VIRT_PLIC_NUM_PRIORITIES 7 > +#define VIRT_PLIC_PRIORITY_BASE 0x0 > +#define VIRT_PLIC_PENDING_BASE 0x1000 > +#define VIRT_PLIC_ENABLE_BASE 0x2000 > +#define VIRT_PLIC_ENABLE_STRIDE 0x80 > +#define VIRT_PLIC_CONTEXT_BASE 0x200000 > +#define VIRT_PLIC_CONTEXT_STRIDE 0x1000 > + > +#endif
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c new file mode 100644 index 0000000..46d95b2 --- /dev/null +++ b/hw/riscv/virt.c @@ -0,0 +1,375 @@ +/* + * QEMU RISC-V VirtIO Board + * + * Copyright (c) 2017 SiFive, Inc. + * + * RISC-V machine with 16550a UART and VirtIO MMIO + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "hw/hw.h" +#include "hw/boards.h" +#include "hw/loader.h" +#include "hw/sysbus.h" +#include "hw/char/serial.h" +#include "target/riscv/cpu.h" +#include "hw/riscv/riscv_htif.h" +#include "hw/riscv/riscv_hart.h" +#include "hw/riscv/sifive_plic.h" +#include "hw/riscv/sifive_clint.h" +#include "hw/riscv/sifive_test.h" +#include "hw/riscv/virt.h" +#include "chardev/char.h" +#include "sysemu/arch_init.h" +#include "sysemu/device_tree.h" +#include "exec/address-spaces.h" +#include "elf.h" + +static const struct MemmapEntry { + hwaddr base; + hwaddr size; +} virt_memmap[] = { + [VIRT_DEBUG] = { 0x0, 0x100 }, + [VIRT_MROM] = { 0x1000, 0x2000 }, + [VIRT_TEST] = { 0x4000, 0x1000 }, + [VIRT_CLINT] = { 0x2000000, 0x10000 }, + [VIRT_PLIC] = { 0xc000000, 0x4000000 }, + [VIRT_UART0] = { 0x10000000, 0x100 }, + [VIRT_VIRTIO] = { 0x10001000, 0x1000 }, + [VIRT_DRAM] = { 0x80000000, 0x0 }, +}; + +static uint64_t identity_translate(void *opaque, uint64_t addr) +{ + return addr; +} + +static uint64_t load_kernel(const char *kernel_filename) +{ + uint64_t kernel_entry, kernel_high; + + if (load_elf(kernel_filename, identity_translate, NULL, + &kernel_entry, NULL, &kernel_high, + 0, ELF_MACHINE, 1, 0) < 0) { + error_report("qemu: could not load kernel '%s'", kernel_filename); + exit(1); + } + return kernel_entry; +} + +static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, + uint64_t mem_size, const char *cmdline) +{ + void *fdt; + int cpu; + uint32_t *cells; + char *nodename; + uint32_t plic_phandle, phandle = 1; + int i; + + fdt = s->fdt = create_device_tree(&s->fdt_size); + if (!fdt) { + error_report("create_device_tree() failed"); + exit(1); + } + + qemu_fdt_setprop_string(fdt, "/", "model", "riscv-virtio,qemu"); + qemu_fdt_setprop_string(fdt, "/", "compatible", "riscv-virtio"); + qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); + qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); + + qemu_fdt_add_subnode(fdt, "/soc"); + qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0); + qemu_fdt_setprop_string(fdt, "/soc", "compatible", "riscv-virtio-soc"); + qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2); + qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2); + + nodename = g_strdup_printf("/memory@%lx", + (long)memmap[VIRT_DRAM].base); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_cells(fdt, nodename, "reg", + memmap[VIRT_DRAM].base >> 32, memmap[VIRT_DRAM].base, + mem_size >> 32, mem_size); + qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); + g_free(nodename); + + qemu_fdt_add_subnode(fdt, "/cpus"); + qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency", 10000000); + qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0); + qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1); + + for (cpu = s->soc.num_harts - 1; cpu >= 0; cpu--) { + int cpu_phandle = phandle++; + nodename = g_strdup_printf("/cpus/cpu@%d", cpu); + char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); + char *isa = riscv_isa_string(&s->soc.harts[cpu]); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 1000000000); + qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); + qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa); + qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv"); + qemu_fdt_setprop_string(fdt, nodename, "status", "okay"); + qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu); + qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu"); + qemu_fdt_add_subnode(fdt, intc); + qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle); + qemu_fdt_setprop_cell(fdt, intc, "linux,phandle", cpu_phandle); + qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc"); + qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0); + qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1); + g_free(isa); + g_free(intc); + g_free(nodename); + } + + cells = g_new0(uint32_t, s->soc.num_harts * 4); + for (cpu = 0; cpu < s->soc.num_harts; cpu++) { + nodename = + g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); + uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); + cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); + cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT); + cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); + cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER); + g_free(nodename); + } + nodename = g_strdup_printf("/soc/clint@%lx", + (long)memmap[VIRT_CLINT].base); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,clint0"); + qemu_fdt_setprop_cells(fdt, nodename, "reg", + 0x0, memmap[VIRT_CLINT].base, + 0x0, memmap[VIRT_CLINT].size); + qemu_fdt_setprop(fdt, nodename, "interrupts-extended", + cells, s->soc.num_harts * sizeof(uint32_t) * 4); + g_free(cells); + g_free(nodename); + + plic_phandle = phandle++; + cells = g_new0(uint32_t, s->soc.num_harts * 4); + for (cpu = 0; cpu < s->soc.num_harts; cpu++) { + nodename = + g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); + uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); + cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); + cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_EXT); + cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); + cells[cpu * 4 + 3] = cpu_to_be32(IRQ_S_EXT); + g_free(nodename); + } + nodename = g_strdup_printf("/soc/interrupt-controller@%lx", + (long)memmap[VIRT_PLIC].base); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1); + qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0"); + qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); + qemu_fdt_setprop(fdt, nodename, "interrupts-extended", + cells, s->soc.num_harts * sizeof(uint32_t) * 4); + qemu_fdt_setprop_cells(fdt, nodename, "reg", + 0x0, memmap[VIRT_PLIC].base, + 0x0, memmap[VIRT_PLIC].size); + qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control"); + qemu_fdt_setprop_cell(fdt, nodename, "riscv,max-priority", 7); + qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", VIRTIO_NDEV); + qemu_fdt_setprop_cells(fdt, nodename, "phandle", plic_phandle); + qemu_fdt_setprop_cells(fdt, nodename, "linux,phandle", plic_phandle); + plic_phandle = qemu_fdt_get_phandle(fdt, nodename); + g_free(cells); + g_free(nodename); + + for (i = 0; i < VIRTIO_COUNT; i++) { + nodename = g_strdup_printf("/virtio_mmio@%lx", + (long)(memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size)); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_string(fdt, nodename, "compatible", "virtio,mmio"); + qemu_fdt_setprop_cells(fdt, nodename, "reg", + 0x0, memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, + 0x0, memmap[VIRT_VIRTIO].size); + qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle); + qemu_fdt_setprop_cells(fdt, nodename, "interrupts", VIRTIO_IRQ + i); + g_free(nodename); + } + + nodename = g_strdup_printf("/test@%lx", + (long)memmap[VIRT_TEST].base); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,test0"); + qemu_fdt_setprop_cells(fdt, nodename, "reg", + 0x0, memmap[VIRT_TEST].base, + 0x0, memmap[VIRT_TEST].size); + + nodename = g_strdup_printf("/uart@%lx", + (long)memmap[VIRT_UART0].base); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_string(fdt, nodename, "compatible", "ns16550a"); + qemu_fdt_setprop_cells(fdt, nodename, "reg", + 0x0, memmap[VIRT_UART0].base, + 0x0, memmap[VIRT_UART0].size); + qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 3686400); + qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle); + qemu_fdt_setprop_cells(fdt, nodename, "interrupts", UART0_IRQ); + + qemu_fdt_add_subnode(fdt, "/chosen"); + qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename); + qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline); + g_free(nodename); +} + +static void riscv_virt_board_init(MachineState *machine) +{ + const struct MemmapEntry *memmap = virt_memmap; + + RISCVVirtState *s = g_new0(RISCVVirtState, 1); + MemoryRegion *system_memory = get_system_memory(); + MemoryRegion *main_mem = g_new(MemoryRegion, 1); + MemoryRegion *boot_rom = g_new(MemoryRegion, 1); + char *plic_hart_config; + size_t plic_hart_config_len; + int i; + + /* Initialize SOC */ + object_initialize(&s->soc, sizeof(s->soc), TYPE_RISCV_HART_ARRAY); + object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc), + &error_abort); + object_property_set_str(OBJECT(&s->soc), TYPE_RISCV_CPU_IMAFDCSU_PRIV_1_10, + "cpu-type", &error_abort); + object_property_set_int(OBJECT(&s->soc), smp_cpus, "num-harts", + &error_abort); + object_property_set_bool(OBJECT(&s->soc), true, "realized", + &error_abort); + + /* register system main memory (actual RAM) */ + memory_region_init_ram(main_mem, NULL, "riscv_virt_board.ram", + machine->ram_size, &error_fatal); + memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base, + main_mem); + + /* create device tree */ + create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline); + + /* boot rom */ + memory_region_init_ram(boot_rom, NULL, "riscv_virt_board.bootrom", + s->fdt_size + 0x2000, &error_fatal); + memory_region_add_subregion(system_memory, 0x0, boot_rom); + + if (machine->kernel_filename) { + load_kernel(machine->kernel_filename); + } + + /* reset vector */ + uint32_t reset_vec[8] = { + 0x00000297, /* 1: auipc t0, %pcrel_hi(dtb) */ + 0x02028593, /* addi a1, t0, %pcrel_lo(1b) */ + 0xf1402573, /* csrr a0, mhartid */ +#if defined(TARGET_RISCV32) + 0x0182a283, /* lw t0, 24(t0) */ +#elif defined(TARGET_RISCV64) + 0x0182b283, /* ld t0, 24(t0) */ +#endif + 0x00028067, /* jr t0 */ + 0x00000000, + memmap[VIRT_DRAM].base, /* start: .dword memmap[VIRT_DRAM].base */ + 0x00000000, + /* dtb: */ + }; + + /* copy in the reset vector */ + cpu_physical_memory_write(ROM_BASE, reset_vec, sizeof(reset_vec)); + + /* copy in the device tree */ + qemu_fdt_dumpdtb(s->fdt, s->fdt_size); + cpu_physical_memory_write(ROM_BASE + sizeof(reset_vec), + s->fdt, s->fdt_size); + + /* create PLIC hart topology configuration string */ + plic_hart_config_len = (strlen(VIRT_PLIC_HART_CONFIG) + 1) * smp_cpus; + plic_hart_config = g_malloc0(plic_hart_config_len); + for (i = 0; i < smp_cpus; i++) { + if (i != 0) { + strncat(plic_hart_config, ",", plic_hart_config_len); + } + strncat(plic_hart_config, VIRT_PLIC_HART_CONFIG, plic_hart_config_len); + plic_hart_config_len -= (strlen(VIRT_PLIC_HART_CONFIG) + 1); + } + + /* MMIO */ + s->plic = sifive_plic_create(memmap[VIRT_PLIC].base, + plic_hart_config, + VIRT_PLIC_NUM_SOURCES, + VIRT_PLIC_NUM_PRIORITIES, + VIRT_PLIC_PRIORITY_BASE, + VIRT_PLIC_PENDING_BASE, + VIRT_PLIC_ENABLE_BASE, + VIRT_PLIC_ENABLE_STRIDE, + VIRT_PLIC_CONTEXT_BASE, + VIRT_PLIC_CONTEXT_STRIDE, + memmap[VIRT_PLIC].size); + sifive_clint_create(memmap[VIRT_CLINT].base, + memmap[VIRT_CLINT].size, smp_cpus, + SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE); + sifive_test_create(memmap[VIRT_TEST].base); + + for (i = 0; i < VIRTIO_COUNT; i++) { + sysbus_create_simple("virtio-mmio", + memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, + SIFIVE_PLIC(s->plic)->irqs[VIRTIO_IRQ + i]); + } + + serial_mm_init(system_memory, memmap[VIRT_UART0].base, + 0, SIFIVE_PLIC(s->plic)->irqs[UART0_IRQ], 399193, + serial_hds[0], DEVICE_LITTLE_ENDIAN); +} + +static int riscv_virt_board_sysbus_device_init(SysBusDevice *sysbusdev) +{ + return 0; +} + +static void riscv_virt_board_class_init(ObjectClass *klass, void *data) +{ + SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); + k->init = riscv_virt_board_sysbus_device_init; +} + +static const TypeInfo riscv_virt_board_device = { + .name = TYPE_RISCV_VIRT_BOARD, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(RISCVVirtState), + .class_init = riscv_virt_board_class_init, +}; + +static void riscv_virt_board_machine_init(MachineClass *mc) +{ + mc->desc = "RISC-V VirtIO Board (Privileged spec v1.10)"; + mc->init = riscv_virt_board_init; + mc->max_cpus = 8; /* hardcoded limit in BBL */ +} + +DEFINE_MACHINE("virt", riscv_virt_board_machine_init) + +static void riscv_virt_board_register_types(void) +{ + type_register_static(&riscv_virt_board_device); +} + +type_init(riscv_virt_board_register_types); diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h new file mode 100644 index 0000000..024a09f --- /dev/null +++ b/include/hw/riscv/virt.h @@ -0,0 +1,74 @@ +/* + * SiFive VirtIO Board + * + * Copyright (c) 2017 SiFive, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_VIRT_H +#define HW_VIRT_H + +#define TYPE_RISCV_VIRT_BOARD "riscv.virt" +#define VIRT(obj) \ + OBJECT_CHECK(RISCVVirtState, (obj), TYPE_RISCV_VIRT_BOARD) + +enum { ROM_BASE = 0x1000 }; + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + RISCVHartArrayState soc; + DeviceState *plic; + void *fdt; + int fdt_size; +} RISCVVirtState; + +enum { + VIRT_DEBUG, + VIRT_MROM, + VIRT_TEST, + VIRT_CLINT, + VIRT_PLIC, + VIRT_UART0, + VIRT_VIRTIO, + VIRT_DRAM +}; + + +enum { + UART0_IRQ = 10, + VIRTIO_IRQ = 1, /* 1 to 8 */ + VIRTIO_COUNT = 8, + VIRTIO_NDEV = 10 +}; + +#define VIRT_PLIC_HART_CONFIG "MS" +#define VIRT_PLIC_NUM_SOURCES 127 +#define VIRT_PLIC_NUM_PRIORITIES 7 +#define VIRT_PLIC_PRIORITY_BASE 0x0 +#define VIRT_PLIC_PENDING_BASE 0x1000 +#define VIRT_PLIC_ENABLE_BASE 0x2000 +#define VIRT_PLIC_ENABLE_STRIDE 0x80 +#define VIRT_PLIC_CONTEXT_BASE 0x200000 +#define VIRT_PLIC_CONTEXT_STRIDE 0x1000 + +#endif
RISC-V machine with device-tree, 16550a UART and VirtIO MMIO. The following machine is implemented: - 'virt'; CLINT, PLIC, 16550A UART, VirtIO MMIO, device-tree Signed-off-by: Michael Clark <mjc@sifive.com> --- hw/riscv/virt.c | 375 ++++++++++++++++++++++++++++++++++++++++++++++++ include/hw/riscv/virt.h | 74 ++++++++++ 2 files changed, 449 insertions(+) create mode 100644 hw/riscv/virt.c create mode 100644 include/hw/riscv/virt.h