| Message ID | 1517607957-5664-1-git-send-email-khoroshilov@ispras.ru (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Alexey, On 03/02/2018 at 00:45:57 +0300, Alexey Khoroshilov wrote: > ftrtc010_rtc_probe() leaves clks enabled in case of errors. > The patch adds proper disabling code. > > Found by Linux Driver Verification project (linuxtesting.org). > > Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> > --- > drivers/rtc/rtc-ftrtc010.c | 37 ++++++++++++++++++++++++++++--------- > 1 file changed, 28 insertions(+), 9 deletions(-) > > diff --git a/drivers/rtc/rtc-ftrtc010.c b/drivers/rtc/rtc-ftrtc010.c > index af8d6beae20c..67a0aadf488c 100644 > --- a/drivers/rtc/rtc-ftrtc010.c > +++ b/drivers/rtc/rtc-ftrtc010.c > @@ -147,33 +147,52 @@ static int ftrtc010_rtc_probe(struct platform_device *pdev) > ret = clk_prepare_enable(rtc->extclk); > if (ret) { > dev_err(dev, "failed to enable EXTCLK\n"); > - return ret; > + goto err_pclk; > } > } > > res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); > - if (!res) > - return -ENODEV; > + if (!res) { > + ret = -ENODEV; > + goto err_extclk; > + } > > rtc->rtc_irq = res->start; > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > - if (!res) > - return -ENODEV; > + if (!res) { > + ret = -ENODEV; > + goto err_extclk; > + } > > rtc->rtc_base = devm_ioremap(dev, res->start, > resource_size(res)); > - if (!rtc->rtc_base) > - return -ENOMEM; > + if (!rtc->rtc_base) { > + ret = -ENOMEM; > + goto err_extclk; > + } > > ret = devm_request_irq(dev, rtc->rtc_irq, ftrtc010_rtc_interrupt, > IRQF_SHARED, pdev->name, dev); > if (unlikely(ret)) > - return ret; > + goto err_extclk; > To simplify the error handling, it is probably simpler to move the clk_prepare_enable here. > rtc->rtc_dev = rtc_device_register(pdev->name, dev, > &ftrtc010_rtc_ops, THIS_MODULE); > - return PTR_ERR_OR_ZERO(rtc->rtc_dev); > + if (IS_ERR(rtc->rtc_dev)) { > + ret = PTR_ERR(rtc->rtc_dev); > + goto err_extclk; > + } > + > + return 0; > + > +err_extclk: > + if (!IS_ERR(rtc->extclk)) > + clk_disable_unprepare(rtc->extclk); > +err_pclk: > + if (!IS_ERR(rtc->pclk)) > + clk_disable_unprepare(rtc->pclk); > + return ret; > } > > static int ftrtc010_rtc_remove(struct platform_device *pdev) > -- > 2.7.4 >
diff --git a/drivers/rtc/rtc-ftrtc010.c b/drivers/rtc/rtc-ftrtc010.c index af8d6beae20c..67a0aadf488c 100644 --- a/drivers/rtc/rtc-ftrtc010.c +++ b/drivers/rtc/rtc-ftrtc010.c @@ -147,33 +147,52 @@ static int ftrtc010_rtc_probe(struct platform_device *pdev) ret = clk_prepare_enable(rtc->extclk); if (ret) { dev_err(dev, "failed to enable EXTCLK\n"); - return ret; + goto err_pclk; } } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) - return -ENODEV; + if (!res) { + ret = -ENODEV; + goto err_extclk; + } rtc->rtc_irq = res->start; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; + if (!res) { + ret = -ENODEV; + goto err_extclk; + } rtc->rtc_base = devm_ioremap(dev, res->start, resource_size(res)); - if (!rtc->rtc_base) - return -ENOMEM; + if (!rtc->rtc_base) { + ret = -ENOMEM; + goto err_extclk; + } ret = devm_request_irq(dev, rtc->rtc_irq, ftrtc010_rtc_interrupt, IRQF_SHARED, pdev->name, dev); if (unlikely(ret)) - return ret; + goto err_extclk; rtc->rtc_dev = rtc_device_register(pdev->name, dev, &ftrtc010_rtc_ops, THIS_MODULE); - return PTR_ERR_OR_ZERO(rtc->rtc_dev); + if (IS_ERR(rtc->rtc_dev)) { + ret = PTR_ERR(rtc->rtc_dev); + goto err_extclk; + } + + return 0; + +err_extclk: + if (!IS_ERR(rtc->extclk)) + clk_disable_unprepare(rtc->extclk); +err_pclk: + if (!IS_ERR(rtc->pclk)) + clk_disable_unprepare(rtc->pclk); + return ret; } static int ftrtc010_rtc_remove(struct platform_device *pdev)
ftrtc010_rtc_probe() leaves clks enabled in case of errors. The patch adds proper disabling code. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> --- drivers/rtc/rtc-ftrtc010.c | 37 ++++++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 9 deletions(-)