| Message ID | 20180208183035.8461-5-sebastian.reichel@collabora.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Feb 08, 2018 at 07:30:31PM +0100, Sebastian Reichel wrote: > Introduce new "orientation" property for describing in which > orientation a panel has been mounted to the device. This can > be used by the operating system to automatically rotate the > display correctly. > > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> > --- > .../devicetree/bindings/display/panel/panel-common.txt | 12 ++++++++++++ > include/dt-bindings/display/common.h | 14 ++++++++++++++ > 2 files changed, 26 insertions(+) > create mode 100644 include/dt-bindings/display/common.h > > diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.txt b/Documentation/devicetree/bindings/display/panel/panel-common.txt > index 557fa765adcb..c646b8908458 100644 > --- a/Documentation/devicetree/bindings/display/panel/panel-common.txt > +++ b/Documentation/devicetree/bindings/display/panel/panel-common.txt > @@ -18,6 +18,18 @@ Descriptive Properties > physical area where images are displayed. These properties are expressed in > millimeters and rounded to the closest unit. > > +- orientation: The orientation property specifies the panel orientation > + in relation to the device's casing. The following values are possible: > + > + * 0 = The top side of the panel matches the top side of the device's > + casing. > + * 1 = The top side of the panel matches the bottom side of the device's > + casing. In other words the panel is mounted upside-down. > + * 2 = The left side of the panel matches the top side of the device's > + casing. > + * 3 = The right side of the panel matches the top side of the device's > + casing. The rotation property in panel.txt already handles this, right? > + > - label: The label property specifies a symbolic name for the panel as a > string suitable for use by humans. It typically contains a name inscribed on > the system (e.g. as an affixed label) or specified in the system's -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Sun, Feb 18, 2018 at 05:24:24PM -0600, Rob Herring wrote: > On Thu, Feb 08, 2018 at 07:30:31PM +0100, Sebastian Reichel wrote: > > Introduce new "orientation" property for describing in which > > orientation a panel has been mounted to the device. This can > > be used by the operating system to automatically rotate the > > display correctly. > > > > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> > > --- > > .../devicetree/bindings/display/panel/panel-common.txt | 12 ++++++++++++ > > include/dt-bindings/display/common.h | 14 ++++++++++++++ > > 2 files changed, 26 insertions(+) > > create mode 100644 include/dt-bindings/display/common.h > > > > diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.txt b/Documentation/devicetree/bindings/display/panel/panel-common.txt > > index 557fa765adcb..c646b8908458 100644 > > --- a/Documentation/devicetree/bindings/display/panel/panel-common.txt > > +++ b/Documentation/devicetree/bindings/display/panel/panel-common.txt > > @@ -18,6 +18,18 @@ Descriptive Properties > > physical area where images are displayed. These properties are expressed in > > millimeters and rounded to the closest unit. > > > > +- orientation: The orientation property specifies the panel orientation > > + in relation to the device's casing. The following values are possible: > > + > > + * 0 = The top side of the panel matches the top side of the device's > > + casing. > > + * 1 = The top side of the panel matches the bottom side of the device's > > + casing. In other words the panel is mounted upside-down. > > + * 2 = The left side of the panel matches the top side of the device's > > + casing. > > + * 3 = The right side of the panel matches the top side of the device's > > + casing. > > The rotation property in panel.txt already handles this, right? Yes, looks like it can be used. I guess panel.txt and panel-common.txt should be merged, though? > > - label: The label property specifies a symbolic name for the panel as a > > string suitable for use by humans. It typically contains a name inscribed on > > the system (e.g. as an affixed label) or specified in the system's -- Sebastian
On Mon, Feb 19, 2018 at 5:06 AM, Sebastian Reichel <sebastian.reichel@collabora.co.uk> wrote: > Hi, > > On Sun, Feb 18, 2018 at 05:24:24PM -0600, Rob Herring wrote: >> On Thu, Feb 08, 2018 at 07:30:31PM +0100, Sebastian Reichel wrote: >> > Introduce new "orientation" property for describing in which >> > orientation a panel has been mounted to the device. This can >> > be used by the operating system to automatically rotate the >> > display correctly. >> > >> > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> >> > --- >> > .../devicetree/bindings/display/panel/panel-common.txt | 12 ++++++++++++ >> > include/dt-bindings/display/common.h | 14 ++++++++++++++ >> > 2 files changed, 26 insertions(+) >> > create mode 100644 include/dt-bindings/display/common.h >> > >> > diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.txt b/Documentation/devicetree/bindings/display/panel/panel-common.txt >> > index 557fa765adcb..c646b8908458 100644 >> > --- a/Documentation/devicetree/bindings/display/panel/panel-common.txt >> > +++ b/Documentation/devicetree/bindings/display/panel/panel-common.txt >> > @@ -18,6 +18,18 @@ Descriptive Properties >> > physical area where images are displayed. These properties are expressed in >> > millimeters and rounded to the closest unit. >> > >> > +- orientation: The orientation property specifies the panel orientation >> > + in relation to the device's casing. The following values are possible: >> > + >> > + * 0 = The top side of the panel matches the top side of the device's >> > + casing. >> > + * 1 = The top side of the panel matches the bottom side of the device's >> > + casing. In other words the panel is mounted upside-down. >> > + * 2 = The left side of the panel matches the top side of the device's >> > + casing. >> > + * 3 = The right side of the panel matches the top side of the device's >> > + casing. >> >> The rotation property in panel.txt already handles this, right? > > Yes, looks like it can be used. I guess panel.txt and > panel-common.txt should be merged, though? Yes, please. Actually, I'd like to merge simple-panel.txt too because that is really kernel driver, not a type of panel. But there's a lot of references to it to fix. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.txt b/Documentation/devicetree/bindings/display/panel/panel-common.txt index 557fa765adcb..c646b8908458 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.txt +++ b/Documentation/devicetree/bindings/display/panel/panel-common.txt @@ -18,6 +18,18 @@ Descriptive Properties physical area where images are displayed. These properties are expressed in millimeters and rounded to the closest unit. +- orientation: The orientation property specifies the panel orientation + in relation to the device's casing. The following values are possible: + + * 0 = The top side of the panel matches the top side of the device's + casing. + * 1 = The top side of the panel matches the bottom side of the device's + casing. In other words the panel is mounted upside-down. + * 2 = The left side of the panel matches the top side of the device's + casing. + * 3 = The right side of the panel matches the top side of the device's + casing. + - label: The label property specifies a symbolic name for the panel as a string suitable for use by humans. It typically contains a name inscribed on the system (e.g. as an affixed label) or specified in the system's diff --git a/include/dt-bindings/display/common.h b/include/dt-bindings/display/common.h new file mode 100644 index 000000000000..a864775445a0 --- /dev/null +++ b/include/dt-bindings/display/common.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides common constants for displays + */ + +#ifndef _DT_BINDINGS_DISPLAY_COMMON_H +#define _DT_BINDINGS_DISPLAY_COMMON_H + +#define PANEL_ORIENTATION_NORMAL 0 +#define PANEL_ORIENTATION_BOTTOM_UP 1 +#define PANEL_ORIENTATION_LEFT_UP 2 +#define PANEL_ORIENTATION_RIGHT_UP 3 + +#endif
Introduce new "orientation" property for describing in which orientation a panel has been mounted to the device. This can be used by the operating system to automatically rotate the display correctly. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> --- .../devicetree/bindings/display/panel/panel-common.txt | 12 ++++++++++++ include/dt-bindings/display/common.h | 14 ++++++++++++++ 2 files changed, 26 insertions(+) create mode 100644 include/dt-bindings/display/common.h