| Message ID | 20180302015751.25596-18-niklas.soderlund+renesas@ragnatech.se (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Niklas, Thank you for the patch. On Friday, 2 March 2018 03:57:36 EET Niklas Söderlund wrote: > Bus configuration will once the driver is extended to support Gen3 > contain information not specific to only the directly connected parallel > subdevice. Move it to struct rvin_dev to show it's not always coupled > to the parallel subdevice. The subject line still mentions rvin_info. Are you so emotionally attached to it that you have trouble fixing that ? ;-) > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> > --- > drivers/media/platform/rcar-vin/rcar-core.c | 18 +++++++++--------- > drivers/media/platform/rcar-vin/rcar-dma.c | 11 ++++++----- > drivers/media/platform/rcar-vin/rcar-v4l2.c | 2 +- > drivers/media/platform/rcar-vin/rcar-vin.h | 9 ++++----- > 4 files changed, 20 insertions(+), 20 deletions(-) > > diff --git a/drivers/media/platform/rcar-vin/rcar-core.c > b/drivers/media/platform/rcar-vin/rcar-core.c index > cc863e4ec9a4d4b3..449175c3133e42c6 100644 > --- a/drivers/media/platform/rcar-vin/rcar-core.c > +++ b/drivers/media/platform/rcar-vin/rcar-core.c > @@ -65,10 +65,10 @@ static int rvin_digital_subdevice_attach(struct rvin_dev > *vin, vin->digital->sink_pad = ret < 0 ? 0 : ret; > > /* Find compatible subdevices mbus format */ > - vin->digital->code = 0; > + vin->mbus_code = 0; > code.index = 0; > code.pad = vin->digital->source_pad; > - while (!vin->digital->code && > + while (!vin->mbus_code && > !v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL, &code)) { > code.index++; > switch (code.code) { > @@ -76,16 +76,16 @@ static int rvin_digital_subdevice_attach(struct rvin_dev > *vin, case MEDIA_BUS_FMT_UYVY8_2X8: > case MEDIA_BUS_FMT_UYVY10_2X10: > case MEDIA_BUS_FMT_RGB888_1X24: > - vin->digital->code = code.code; > + vin->mbus_code = code.code; > vin_dbg(vin, "Found media bus format for %s: %d\n", > - subdev->name, vin->digital->code); > + subdev->name, vin->mbus_code); > break; > default: > break; > } > } > > - if (!vin->digital->code) { > + if (!vin->mbus_code) { > vin_err(vin, "Unsupported media bus format for %s\n", > subdev->name); > return -EINVAL; > @@ -190,16 +190,16 @@ static int rvin_digital_parse_v4l2(struct device *dev, > if (vep->base.port || vep->base.id) > return -ENOTCONN; > > - rvge->mbus_cfg.type = vep->bus_type; > + vin->mbus_cfg.type = vep->bus_type; > > - switch (rvge->mbus_cfg.type) { > + switch (vin->mbus_cfg.type) { > case V4L2_MBUS_PARALLEL: > vin_dbg(vin, "Found PARALLEL media bus\n"); > - rvge->mbus_cfg.flags = vep->bus.parallel.flags; > + vin->mbus_cfg.flags = vep->bus.parallel.flags; > break; > case V4L2_MBUS_BT656: > vin_dbg(vin, "Found BT656 media bus\n"); > - rvge->mbus_cfg.flags = 0; > + vin->mbus_cfg.flags = 0; > break; > default: > vin_err(vin, "Unknown media bus type\n"); > diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c > b/drivers/media/platform/rcar-vin/rcar-dma.c index > c8831e189d362c8b..4ebf76c30a3e9117 100644 > --- a/drivers/media/platform/rcar-vin/rcar-dma.c > +++ b/drivers/media/platform/rcar-vin/rcar-dma.c > @@ -633,7 +633,7 @@ static int rvin_setup(struct rvin_dev *vin) > /* > * Input interface > */ > - switch (vin->digital->code) { > + switch (vin->mbus_code) { > case MEDIA_BUS_FMT_YUYV8_1X16: > /* BT.601/BT.1358 16bit YCbCr422 */ > vnmc |= VNMC_INF_YUV16; > @@ -641,7 +641,7 @@ static int rvin_setup(struct rvin_dev *vin) > break; > case MEDIA_BUS_FMT_UYVY8_2X8: > /* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */ > - vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ? > + vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ? > VNMC_INF_YUV8_BT656 : VNMC_INF_YUV8_BT601; > input_is_yuv = true; > break; > @@ -650,7 +650,7 @@ static int rvin_setup(struct rvin_dev *vin) > break; > case MEDIA_BUS_FMT_UYVY10_2X10: > /* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */ > - vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ? > + vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ? > VNMC_INF_YUV10_BT656 : VNMC_INF_YUV10_BT601; > input_is_yuv = true; > break; > @@ -662,11 +662,11 @@ static int rvin_setup(struct rvin_dev *vin) > dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1); > > /* Hsync Signal Polarity Select */ > - if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) > + if (!(vin->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) > dmr2 |= VNDMR2_HPS; > > /* Vsync Signal Polarity Select */ > - if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) > + if (!(vin->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) > dmr2 |= VNDMR2_VPS; > > /* > @@ -875,6 +875,7 @@ static void rvin_capture_stop(struct rvin_dev *vin) > rvin_write(vin, rvin_read(vin, VNMC_REG) & ~VNMC_ME, VNMC_REG); > } > > + This is not needed. Apart from that, Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > /* ------------------------------------------------------------------------ > * DMA Functions > */ > diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c > b/drivers/media/platform/rcar-vin/rcar-v4l2.c index > 55640c6b2a1200ca..20be21cb1cf521e5 100644 > --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c > +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c > @@ -199,7 +199,7 @@ static int rvin_try_format(struct rvin_dev *vin, u32 > which, if (pad_cfg == NULL) > return -ENOMEM; > > - v4l2_fill_mbus_format(&format.format, pix, vin->digital->code); > + v4l2_fill_mbus_format(&format.format, pix, vin->mbus_code); > > /* Allow the video device to override field and to scale */ > field = pix->field; > diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h > b/drivers/media/platform/rcar-vin/rcar-vin.h index > 39051da31650bd79..491f3187b932f81e 100644 > --- a/drivers/media/platform/rcar-vin/rcar-vin.h > +++ b/drivers/media/platform/rcar-vin/rcar-vin.h > @@ -62,8 +62,6 @@ struct rvin_video_format { > * struct rvin_graph_entity - Video endpoint from async framework > * @asd: sub-device descriptor for async framework > * @subdev: subdevice matched using async framework > - * @code: Media bus format from source > - * @mbus_cfg: Media bus format from DT > * @source_pad: source pad of remote subdevice > * @sink_pad: sink pad of remote subdevice > */ > @@ -71,9 +69,6 @@ struct rvin_graph_entity { > struct v4l2_async_subdev asd; > struct v4l2_subdev *subdev; > > - u32 code; > - struct v4l2_mbus_config mbus_cfg; > - > unsigned int source_pad; > unsigned int sink_pad; > }; > @@ -114,6 +109,8 @@ struct rvin_info { > * @sequence: V4L2 buffers sequence number > * @state: keeps track of operation state > * > + * @mbus_cfg: media bus configuration from DT > + * @mbus_code: media bus format code > * @format: active V4L2 pixel format > * > * @crop: active cropping > @@ -140,6 +137,8 @@ struct rvin_dev { > unsigned int sequence; > enum rvin_dma_state state; > > + struct v4l2_mbus_config mbus_cfg; > + u32 mbus_code; > struct v4l2_pix_format format; > > struct v4l2_rect crop;
Hi Laurent, Thanks for your feedback. On 2018-03-02 13:26:58 +0200, Laurent Pinchart wrote: > Hi Niklas, > > Thank you for the patch. > > On Friday, 2 March 2018 03:57:36 EET Niklas Söderlund wrote: > > Bus configuration will once the driver is extended to support Gen3 > > contain information not specific to only the directly connected parallel > > subdevice. Move it to struct rvin_dev to show it's not always coupled > > to the parallel subdevice. > > The subject line still mentions rvin_info. Are you so emotionally attached to > it that you have trouble fixing that ? ;-) I had fixed this, but when I reviewed the patches before I sent them out I miss read the diff and it looked like I had forgotten to fix this and I broke it again. So in short it seems my subconscious are still emotionally attached to rvin_info :-) > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > > Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> > > --- > > drivers/media/platform/rcar-vin/rcar-core.c | 18 +++++++++--------- > > drivers/media/platform/rcar-vin/rcar-dma.c | 11 ++++++----- > > drivers/media/platform/rcar-vin/rcar-v4l2.c | 2 +- > > drivers/media/platform/rcar-vin/rcar-vin.h | 9 ++++----- > > 4 files changed, 20 insertions(+), 20 deletions(-) > > > > diff --git a/drivers/media/platform/rcar-vin/rcar-core.c > > b/drivers/media/platform/rcar-vin/rcar-core.c index > > cc863e4ec9a4d4b3..449175c3133e42c6 100644 > > --- a/drivers/media/platform/rcar-vin/rcar-core.c > > +++ b/drivers/media/platform/rcar-vin/rcar-core.c > > @@ -65,10 +65,10 @@ static int rvin_digital_subdevice_attach(struct rvin_dev > > *vin, vin->digital->sink_pad = ret < 0 ? 0 : ret; > > > > /* Find compatible subdevices mbus format */ > > - vin->digital->code = 0; > > + vin->mbus_code = 0; > > code.index = 0; > > code.pad = vin->digital->source_pad; > > - while (!vin->digital->code && > > + while (!vin->mbus_code && > > !v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL, &code)) { > > code.index++; > > switch (code.code) { > > @@ -76,16 +76,16 @@ static int rvin_digital_subdevice_attach(struct rvin_dev > > *vin, case MEDIA_BUS_FMT_UYVY8_2X8: > > case MEDIA_BUS_FMT_UYVY10_2X10: > > case MEDIA_BUS_FMT_RGB888_1X24: > > - vin->digital->code = code.code; > > + vin->mbus_code = code.code; > > vin_dbg(vin, "Found media bus format for %s: %d\n", > > - subdev->name, vin->digital->code); > > + subdev->name, vin->mbus_code); > > break; > > default: > > break; > > } > > } > > > > - if (!vin->digital->code) { > > + if (!vin->mbus_code) { > > vin_err(vin, "Unsupported media bus format for %s\n", > > subdev->name); > > return -EINVAL; > > @@ -190,16 +190,16 @@ static int rvin_digital_parse_v4l2(struct device *dev, > > if (vep->base.port || vep->base.id) > > return -ENOTCONN; > > > > - rvge->mbus_cfg.type = vep->bus_type; > > + vin->mbus_cfg.type = vep->bus_type; > > > > - switch (rvge->mbus_cfg.type) { > > + switch (vin->mbus_cfg.type) { > > case V4L2_MBUS_PARALLEL: > > vin_dbg(vin, "Found PARALLEL media bus\n"); > > - rvge->mbus_cfg.flags = vep->bus.parallel.flags; > > + vin->mbus_cfg.flags = vep->bus.parallel.flags; > > break; > > case V4L2_MBUS_BT656: > > vin_dbg(vin, "Found BT656 media bus\n"); > > - rvge->mbus_cfg.flags = 0; > > + vin->mbus_cfg.flags = 0; > > break; > > default: > > vin_err(vin, "Unknown media bus type\n"); > > diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c > > b/drivers/media/platform/rcar-vin/rcar-dma.c index > > c8831e189d362c8b..4ebf76c30a3e9117 100644 > > --- a/drivers/media/platform/rcar-vin/rcar-dma.c > > +++ b/drivers/media/platform/rcar-vin/rcar-dma.c > > @@ -633,7 +633,7 @@ static int rvin_setup(struct rvin_dev *vin) > > /* > > * Input interface > > */ > > - switch (vin->digital->code) { > > + switch (vin->mbus_code) { > > case MEDIA_BUS_FMT_YUYV8_1X16: > > /* BT.601/BT.1358 16bit YCbCr422 */ > > vnmc |= VNMC_INF_YUV16; > > @@ -641,7 +641,7 @@ static int rvin_setup(struct rvin_dev *vin) > > break; > > case MEDIA_BUS_FMT_UYVY8_2X8: > > /* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */ > > - vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ? > > + vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ? > > VNMC_INF_YUV8_BT656 : VNMC_INF_YUV8_BT601; > > input_is_yuv = true; > > break; > > @@ -650,7 +650,7 @@ static int rvin_setup(struct rvin_dev *vin) > > break; > > case MEDIA_BUS_FMT_UYVY10_2X10: > > /* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */ > > - vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ? > > + vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ? > > VNMC_INF_YUV10_BT656 : VNMC_INF_YUV10_BT601; > > input_is_yuv = true; > > break; > > @@ -662,11 +662,11 @@ static int rvin_setup(struct rvin_dev *vin) > > dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1); > > > > /* Hsync Signal Polarity Select */ > > - if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) > > + if (!(vin->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) > > dmr2 |= VNDMR2_HPS; > > > > /* Vsync Signal Polarity Select */ > > - if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) > > + if (!(vin->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) > > dmr2 |= VNDMR2_VPS; > > > > /* > > @@ -875,6 +875,7 @@ static void rvin_capture_stop(struct rvin_dev *vin) > > rvin_write(vin, rvin_read(vin, VNMC_REG) & ~VNMC_ME, VNMC_REG); > > } > > > > + > > This is not needed. > > Apart from that, > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Thank you. > > > /* ------------------------------------------------------------------------ > > * DMA Functions > > */ > > diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c > > b/drivers/media/platform/rcar-vin/rcar-v4l2.c index > > 55640c6b2a1200ca..20be21cb1cf521e5 100644 > > --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c > > +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c > > @@ -199,7 +199,7 @@ static int rvin_try_format(struct rvin_dev *vin, u32 > > which, if (pad_cfg == NULL) > > return -ENOMEM; > > > > - v4l2_fill_mbus_format(&format.format, pix, vin->digital->code); > > + v4l2_fill_mbus_format(&format.format, pix, vin->mbus_code); > > > > /* Allow the video device to override field and to scale */ > > field = pix->field; > > diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h > > b/drivers/media/platform/rcar-vin/rcar-vin.h index > > 39051da31650bd79..491f3187b932f81e 100644 > > --- a/drivers/media/platform/rcar-vin/rcar-vin.h > > +++ b/drivers/media/platform/rcar-vin/rcar-vin.h > > @@ -62,8 +62,6 @@ struct rvin_video_format { > > * struct rvin_graph_entity - Video endpoint from async framework > > * @asd: sub-device descriptor for async framework > > * @subdev: subdevice matched using async framework > > - * @code: Media bus format from source > > - * @mbus_cfg: Media bus format from DT > > * @source_pad: source pad of remote subdevice > > * @sink_pad: sink pad of remote subdevice > > */ > > @@ -71,9 +69,6 @@ struct rvin_graph_entity { > > struct v4l2_async_subdev asd; > > struct v4l2_subdev *subdev; > > > > - u32 code; > > - struct v4l2_mbus_config mbus_cfg; > > - > > unsigned int source_pad; > > unsigned int sink_pad; > > }; > > @@ -114,6 +109,8 @@ struct rvin_info { > > * @sequence: V4L2 buffers sequence number > > * @state: keeps track of operation state > > * > > + * @mbus_cfg: media bus configuration from DT > > + * @mbus_code: media bus format code > > * @format: active V4L2 pixel format > > * > > * @crop: active cropping > > @@ -140,6 +137,8 @@ struct rvin_dev { > > unsigned int sequence; > > enum rvin_dma_state state; > > > > + struct v4l2_mbus_config mbus_cfg; > > + u32 mbus_code; > > struct v4l2_pix_format format; > > > > struct v4l2_rect crop; > > -- > Regards, > > Laurent Pinchart >
diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c index cc863e4ec9a4d4b3..449175c3133e42c6 100644 --- a/drivers/media/platform/rcar-vin/rcar-core.c +++ b/drivers/media/platform/rcar-vin/rcar-core.c @@ -65,10 +65,10 @@ static int rvin_digital_subdevice_attach(struct rvin_dev *vin, vin->digital->sink_pad = ret < 0 ? 0 : ret; /* Find compatible subdevices mbus format */ - vin->digital->code = 0; + vin->mbus_code = 0; code.index = 0; code.pad = vin->digital->source_pad; - while (!vin->digital->code && + while (!vin->mbus_code && !v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL, &code)) { code.index++; switch (code.code) { @@ -76,16 +76,16 @@ static int rvin_digital_subdevice_attach(struct rvin_dev *vin, case MEDIA_BUS_FMT_UYVY8_2X8: case MEDIA_BUS_FMT_UYVY10_2X10: case MEDIA_BUS_FMT_RGB888_1X24: - vin->digital->code = code.code; + vin->mbus_code = code.code; vin_dbg(vin, "Found media bus format for %s: %d\n", - subdev->name, vin->digital->code); + subdev->name, vin->mbus_code); break; default: break; } } - if (!vin->digital->code) { + if (!vin->mbus_code) { vin_err(vin, "Unsupported media bus format for %s\n", subdev->name); return -EINVAL; @@ -190,16 +190,16 @@ static int rvin_digital_parse_v4l2(struct device *dev, if (vep->base.port || vep->base.id) return -ENOTCONN; - rvge->mbus_cfg.type = vep->bus_type; + vin->mbus_cfg.type = vep->bus_type; - switch (rvge->mbus_cfg.type) { + switch (vin->mbus_cfg.type) { case V4L2_MBUS_PARALLEL: vin_dbg(vin, "Found PARALLEL media bus\n"); - rvge->mbus_cfg.flags = vep->bus.parallel.flags; + vin->mbus_cfg.flags = vep->bus.parallel.flags; break; case V4L2_MBUS_BT656: vin_dbg(vin, "Found BT656 media bus\n"); - rvge->mbus_cfg.flags = 0; + vin->mbus_cfg.flags = 0; break; default: vin_err(vin, "Unknown media bus type\n"); diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c index c8831e189d362c8b..4ebf76c30a3e9117 100644 --- a/drivers/media/platform/rcar-vin/rcar-dma.c +++ b/drivers/media/platform/rcar-vin/rcar-dma.c @@ -633,7 +633,7 @@ static int rvin_setup(struct rvin_dev *vin) /* * Input interface */ - switch (vin->digital->code) { + switch (vin->mbus_code) { case MEDIA_BUS_FMT_YUYV8_1X16: /* BT.601/BT.1358 16bit YCbCr422 */ vnmc |= VNMC_INF_YUV16; @@ -641,7 +641,7 @@ static int rvin_setup(struct rvin_dev *vin) break; case MEDIA_BUS_FMT_UYVY8_2X8: /* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */ - vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ? + vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ? VNMC_INF_YUV8_BT656 : VNMC_INF_YUV8_BT601; input_is_yuv = true; break; @@ -650,7 +650,7 @@ static int rvin_setup(struct rvin_dev *vin) break; case MEDIA_BUS_FMT_UYVY10_2X10: /* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */ - vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ? + vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ? VNMC_INF_YUV10_BT656 : VNMC_INF_YUV10_BT601; input_is_yuv = true; break; @@ -662,11 +662,11 @@ static int rvin_setup(struct rvin_dev *vin) dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1); /* Hsync Signal Polarity Select */ - if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) + if (!(vin->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) dmr2 |= VNDMR2_HPS; /* Vsync Signal Polarity Select */ - if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) + if (!(vin->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) dmr2 |= VNDMR2_VPS; /* @@ -875,6 +875,7 @@ static void rvin_capture_stop(struct rvin_dev *vin) rvin_write(vin, rvin_read(vin, VNMC_REG) & ~VNMC_ME, VNMC_REG); } + /* ----------------------------------------------------------------------------- * DMA Functions */ diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c index 55640c6b2a1200ca..20be21cb1cf521e5 100644 --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c @@ -199,7 +199,7 @@ static int rvin_try_format(struct rvin_dev *vin, u32 which, if (pad_cfg == NULL) return -ENOMEM; - v4l2_fill_mbus_format(&format.format, pix, vin->digital->code); + v4l2_fill_mbus_format(&format.format, pix, vin->mbus_code); /* Allow the video device to override field and to scale */ field = pix->field; diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h index 39051da31650bd79..491f3187b932f81e 100644 --- a/drivers/media/platform/rcar-vin/rcar-vin.h +++ b/drivers/media/platform/rcar-vin/rcar-vin.h @@ -62,8 +62,6 @@ struct rvin_video_format { * struct rvin_graph_entity - Video endpoint from async framework * @asd: sub-device descriptor for async framework * @subdev: subdevice matched using async framework - * @code: Media bus format from source - * @mbus_cfg: Media bus format from DT * @source_pad: source pad of remote subdevice * @sink_pad: sink pad of remote subdevice */ @@ -71,9 +69,6 @@ struct rvin_graph_entity { struct v4l2_async_subdev asd; struct v4l2_subdev *subdev; - u32 code; - struct v4l2_mbus_config mbus_cfg; - unsigned int source_pad; unsigned int sink_pad; }; @@ -114,6 +109,8 @@ struct rvin_info { * @sequence: V4L2 buffers sequence number * @state: keeps track of operation state * + * @mbus_cfg: media bus configuration from DT + * @mbus_code: media bus format code * @format: active V4L2 pixel format * * @crop: active cropping @@ -140,6 +137,8 @@ struct rvin_dev { unsigned int sequence; enum rvin_dma_state state; + struct v4l2_mbus_config mbus_cfg; + u32 mbus_code; struct v4l2_pix_format format; struct v4l2_rect crop;