| Message ID | 20180227101109.6088-1-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Feb 27, 2018 at 11:11:09AM +0100, Linus Walleij wrote: > This fixes up the .mode_valid() vtable entry documentation > by copyediting the documentation from the .mode_valid() > documentation in the drm_modeset_helper_vtables.h file. > > Fixes: 40275dc4edb4 ("drm: simple_kms_helper: Add mode_valid() callback support") > Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> > --- > include/drm/drm_simple_kms_helper.h | 27 ++++++++++++++++++++++++--- > 1 file changed, 24 insertions(+), 3 deletions(-) > > diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h > index d9e4c3c3f009..0d700a869cc8 100644 > --- a/include/drm/drm_simple_kms_helper.h > +++ b/include/drm/drm_simple_kms_helper.h > @@ -24,9 +24,30 @@ struct drm_simple_display_pipe_funcs { > /** > * @mode_valid: > * > - * This function is called to filter out valid modes from the > - * suggestions suggested by the bridge or display. This optional > - * hook is passed in when initializing the pipeline. > + * This callback is used to check if a specific mode is valid in the > + * crtc used in this simple display pipe. This should be implemented > + * if the display pipe has some sort of restriction in the modes > + * it can display. For example, a given display pipe may be responsible > + * to set a clock value. If the clock can not produce all the values > + * for the available modes then this callback can be used to restrict > + * the number of modes to only the ones that can be displayed. Another > + * reason can be bandwidth mitigation: the memory port on the display > + * controller can have bandwidth limitations not allowing pixel data > + * to be fetched at any rate. > + * > + * This hook is used by the probe helpers to filter the mode list in > + * drm_helper_probe_single_connector_modes(), and it is used by the > + * atomic helpers to validate modes supplied by userspace in > + * drm_atomic_helper_check_modeset(). > + * > + * This function is optional. > + * > + * NOTE: > + * > + * Since this function is both called from the check phase of an atomic > + * commit, and the mode validation in the probe paths it is not allowed > + * to look at anything else but the passed-in mode, and validate it > + * against configuration-invariant hardware constraints. > * > * RETURNS: > * > -- > 2.14.3 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h index d9e4c3c3f009..0d700a869cc8 100644 --- a/include/drm/drm_simple_kms_helper.h +++ b/include/drm/drm_simple_kms_helper.h @@ -24,9 +24,30 @@ struct drm_simple_display_pipe_funcs { /** * @mode_valid: * - * This function is called to filter out valid modes from the - * suggestions suggested by the bridge or display. This optional - * hook is passed in when initializing the pipeline. + * This callback is used to check if a specific mode is valid in the + * crtc used in this simple display pipe. This should be implemented + * if the display pipe has some sort of restriction in the modes + * it can display. For example, a given display pipe may be responsible + * to set a clock value. If the clock can not produce all the values + * for the available modes then this callback can be used to restrict + * the number of modes to only the ones that can be displayed. Another + * reason can be bandwidth mitigation: the memory port on the display + * controller can have bandwidth limitations not allowing pixel data + * to be fetched at any rate. + * + * This hook is used by the probe helpers to filter the mode list in + * drm_helper_probe_single_connector_modes(), and it is used by the + * atomic helpers to validate modes supplied by userspace in + * drm_atomic_helper_check_modeset(). + * + * This function is optional. + * + * NOTE: + * + * Since this function is both called from the check phase of an atomic + * commit, and the mode validation in the probe paths it is not allowed + * to look at anything else but the passed-in mode, and validate it + * against configuration-invariant hardware constraints. * * RETURNS: *
This fixes up the .mode_valid() vtable entry documentation by copyediting the documentation from the .mode_valid() documentation in the drm_modeset_helper_vtables.h file. Fixes: 40275dc4edb4 ("drm: simple_kms_helper: Add mode_valid() callback support") Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- include/drm/drm_simple_kms_helper.h | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-)