| Message ID | 20180307164656.12194-2-s.nawrocki@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On 2018년 03월 08일 01:46, Sylwester Nawrocki wrote: > Adding these EPLL output frequency entries allows to support all required > audio sample rates on the CODEC and the HDMI interface on Peach-Pit > Chromebook. > > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > --- > drivers/clk/samsung/clk-exynos5420.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c > index 1f204ba37f0f..f2607cb97a97 100644 > --- a/drivers/clk/samsung/clk-exynos5420.c > +++ b/drivers/clk/samsung/clk-exynos5420.c > @@ -1360,8 +1360,11 @@ static const struct samsung_pll_rate_table exynos5420_epll_24mhz_tbl[] = { > PLL_36XX_RATE(180633609U, 301, 5, 3, 3671), > PLL_36XX_RATE(131072006U, 131, 3, 3, 4719), > PLL_36XX_RATE(100000000U, 200, 3, 4, 0), > + PLL_36XX_RATE( 73728000U, 98, 2, 4, 19923), > + PLL_36XX_RATE( 67737602U, 90, 2, 4, 20762), > PLL_36XX_RATE( 65536003U, 131, 3, 4, 4719), > PLL_36XX_RATE( 49152000U, 197, 3, 5, -25690), > + PLL_36XX_RATE( 45158401U, 90, 3, 4, 20762), > PLL_36XX_RATE( 32768001U, 131, 3, 5, 4719), > }; > > Looks good to me. Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
On 03/08/2018 02:55 AM, Chanwoo Choi wrote: > On 2018년 03월 08일 01:46, Sylwester Nawrocki wrote: >> Adding these EPLL output frequency entries allows to support all required >> audio sample rates on the CODEC and the HDMI interface on Peach-Pit >> Chromebook. >> >> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> >> --- >> drivers/clk/samsung/clk-exynos5420.c | 3 +++ >> 1 file changed, 3 insertions(+) >> >> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c >> index 1f204ba37f0f..f2607cb97a97 100644 >> --- a/drivers/clk/samsung/clk-exynos5420.c >> +++ b/drivers/clk/samsung/clk-exynos5420.c >> @@ -1360,8 +1360,11 @@ static const struct samsung_pll_rate_table exynos5420_epll_24mhz_tbl[] = { >> PLL_36XX_RATE(180633609U, 301, 5, 3, 3671), >> PLL_36XX_RATE(131072006U, 131, 3, 3, 4719), >> PLL_36XX_RATE(100000000U, 200, 3, 4, 0), >> + PLL_36XX_RATE( 73728000U, 98, 2, 4, 19923), >> + PLL_36XX_RATE( 67737602U, 90, 2, 4, 20762), >> PLL_36XX_RATE( 65536003U, 131, 3, 4, 4719), >> PLL_36XX_RATE( 49152000U, 197, 3, 5, -25690), >> + PLL_36XX_RATE( 45158401U, 90, 3, 4, 20762), >> PLL_36XX_RATE( 32768001U, 131, 3, 5, 4719), >> }; >> >> > Looks good to me. > Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Thanks for your review, patch applied to the clk/samsung tree.
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 1f204ba37f0f..f2607cb97a97 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -1360,8 +1360,11 @@ static const struct samsung_pll_rate_table exynos5420_epll_24mhz_tbl[] = { PLL_36XX_RATE(180633609U, 301, 5, 3, 3671), PLL_36XX_RATE(131072006U, 131, 3, 3, 4719), PLL_36XX_RATE(100000000U, 200, 3, 4, 0), + PLL_36XX_RATE( 73728000U, 98, 2, 4, 19923), + PLL_36XX_RATE( 67737602U, 90, 2, 4, 20762), PLL_36XX_RATE( 65536003U, 131, 3, 4, 4719), PLL_36XX_RATE( 49152000U, 197, 3, 5, -25690), + PLL_36XX_RATE( 45158401U, 90, 3, 4, 20762), PLL_36XX_RATE( 32768001U, 131, 3, 5, 4719), };
Adding these EPLL output frequency entries allows to support all required audio sample rates on the CODEC and the HDMI interface on Peach-Pit Chromebook. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> --- drivers/clk/samsung/clk-exynos5420.c | 3 +++ 1 file changed, 3 insertions(+)