[V2] video: fbdev: atmel_lcdfb: convert to use GPIO descriptors

Commit Message

Ludovic Desroches Feb. 6, 2018, 7:31 a.m. UTC

Use GPIO descriptors instead of relying on the old method.

Signed-off-by: Ludovic Desroches <[e-mail]>
Acked-by: Nicolas Ferre <[e-mail]>
Reviewed-by: Linus Walleij <[e-mail]>
Reviewed-by: Andy Shevchenko <[e-mail]>
---
Changes
- V2:
  - remove of_gpio.h.
  - move gpiod declaration to preserve reversed tree style.
  - use devm_gpiod_get_index instead of devm_gpiod_get_index_optional
  since all errors are treated in the same way.

 drivers/video/fbdev/atmel_lcdfb.c | 31 ++++++++++++-------------------
 1 file changed, 12 insertions(+), 19 deletions(-)

Comments

Bartlomiej Zolnierkiewicz March 12, 2018, 2:35 p.m. UTC | #1

On Tuesday, February 06, 2018 08:31:22 AM Ludovic Desroches wrote:
> Use GPIO descriptors instead of relying on the old method.
> 
> Signed-off-by: Ludovic Desroches <[e-mail]>
> Acked-by: Nicolas Ferre <[e-mail]>
> Reviewed-by: Linus Walleij <[e-mail]>
> Reviewed-by: Andy Shevchenko <[e-mail]>

Patch queued for 4.17, thanks.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index 3dee267d7c75..076d24afbd72 100644
--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -18,10 +18,10 @@ 
 #include <linux/delay.h>
 #include <linux/backlight.h>
 #include <linux/gfp.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <video/of_display_timing.h>
 #include <linux/regulator/consumer.h>
 #include <video/videomode.h>
@@ -61,8 +61,7 @@  struct atmel_lcdfb_info {
 };
 
 struct atmel_lcdfb_power_ctrl_gpio {
-	int gpio;
-	int active_low;
+	struct gpio_desc *gpiod;
 
 	struct list_head list;
 };
@@ -1018,7 +1017,7 @@  static void atmel_lcdfb_power_control_gpio(struct atmel_lcdfb_pdata *pdata, int
 	struct atmel_lcdfb_power_ctrl_gpio *og;
 
 	list_for_each_entry(og, &pdata->pwr_gpios, list)
-		gpio_set_value(og->gpio, on);
+		gpiod_set_value(og->gpiod, on);
 }
 
 static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
@@ -1031,11 +1030,11 @@  static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
 	struct device_node *display_np;
 	struct device_node *timings_np;
 	struct display_timings *timings;
-	enum of_gpio_flags flags;
 	struct atmel_lcdfb_power_ctrl_gpio *og;
 	bool is_gpio_power = false;
+	struct gpio_desc *gpiod;
 	int ret = -ENOENT;
-	int i, gpio;
+	int i;
 
 	sinfo->config = (struct atmel_lcdfb_config*)
 		of_match_device(atmel_lcdfb_dt_ids, dev)->data;
@@ -1072,28 +1071,22 @@  static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
 
 	INIT_LIST_HEAD(&pdata->pwr_gpios);
 	ret = -ENOMEM;
-	for (i = 0; i < of_gpio_named_count(display_np, "atmel,power-control-gpio"); i++) {
-		gpio = of_get_named_gpio_flags(display_np, "atmel,power-control-gpio",
-					       i, &flags);
-		if (gpio < 0)
+	for (i = 0; i < gpiod_count(dev, "atmel,power-control"); i++) {
+		gpiod = devm_gpiod_get_index(dev, "atmel,power-control",
+					     i, GPIOD_ASIS);
+		if (IS_ERR(gpiod))
 			continue;
 
 		og = devm_kzalloc(dev, sizeof(*og), GFP_KERNEL);
 		if (!og)
 			goto put_display_node;
 
-		og->gpio = gpio;
-		og->active_low = flags & OF_GPIO_ACTIVE_LOW;
+		og->gpiod = gpiod;
 		is_gpio_power = true;
-		ret = devm_gpio_request(dev, gpio, "lcd-power-control-gpio");
-		if (ret) {
-			dev_err(dev, "request gpio %d failed\n", gpio);
-			goto put_display_node;
-		}
 
-		ret = gpio_direction_output(gpio, og->active_low);
+		ret = gpiod_direction_output(gpiod, gpiod_is_active_low(gpiod));
 		if (ret) {
-			dev_err(dev, "set direction output gpio %d failed\n", gpio);
+			dev_err(dev, "set direction output gpio atmel,power-control[%d] failed\n", i);
 			goto put_display_node;
 		}
 		list_add(&og->list, &pdata->pwr_gpios);