| Message ID | 1520287361-12569-5-git-send-email-tharvey@gateworks.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Mar 05, 2018 at 02:02:41PM -0800, Tim Harvey wrote: > Add support for dispatching Linux Input events for the various interrupts > the Gateworks System Controller provides. > > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Signed-off-by: Tim Harvey <tharvey@gateworks.com> > --- > v2: > - reword Kconfig > - revise license comment block > - remove unnecessary read of status register > - remove unnecessary setting of input->dev.parent > - use dt bindings for irq to keycode mapping > - add support for platform-data > - remove work-queue > > drivers/input/misc/Kconfig | 9 ++ > drivers/input/misc/Makefile | 1 + > drivers/input/misc/gsc-input.c | 180 ++++++++++++++++++++++++++++++++ > include/linux/platform_data/gsc_input.h | 30 ++++++ > 4 files changed, 220 insertions(+) > create mode 100644 drivers/input/misc/gsc-input.c > create mode 100644 include/linux/platform_data/gsc_input.h > > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig > index 9f082a3..e05f4fe 100644 > --- a/drivers/input/misc/Kconfig > +++ b/drivers/input/misc/Kconfig > @@ -117,6 +117,15 @@ config INPUT_E3X0_BUTTON > To compile this driver as a module, choose M here: the > module will be called e3x0_button. > > +config INPUT_GSC > + tristate "Gateworks System Controller input support" > + depends on MFD_GSC > + help > + Support GSC events as Linux input events. > + > + To compile this driver as a module, choose M here: the > + module will be called gsc_input. > + > config INPUT_PCSPKR > tristate "PC Speaker support" > depends on PCSPKR_PLATFORM > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile > index 4b6118d..969debe 100644 > --- a/drivers/input/misc/Makefile > +++ b/drivers/input/misc/Makefile > @@ -38,6 +38,7 @@ obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o > obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o > obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o > obj-$(CONFIG_INPUT_GPIO_DECODER) += gpio_decoder.o > +obj-$(CONFIG_INPUT_GSC) += gsc-input.o > obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o > obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o > obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o > diff --git a/drivers/input/misc/gsc-input.c b/drivers/input/misc/gsc-input.c > new file mode 100644 > index 0000000..27b5e93 > --- /dev/null > +++ b/drivers/input/misc/gsc-input.c > @@ -0,0 +1,180 @@ > +/* SPDX-License-Identifier: GPL-2.0 > + * > + * Copyright (C) 2018 Gateworks Corporation > + * > + * This driver dispatches Linux input events for GSC interrupt events > + */ > +#include <linux/input.h> > +#include <linux/interrupt.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_irq.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > + > +#include <linux/mfd/gsc.h> > +#include <linux/platform_data/gsc_input.h> > + > +struct gsc_input_button_priv { > + struct input_dev *input; > + const struct gsc_input_button *button; > +}; > + > +struct gsc_input_data { > + struct gsc_dev *gsc; > + struct gsc_input_platform_data *pdata; > + struct input_dev *input; > + struct gsc_input_button_priv *buttons; > + int nbuttons; > + unsigned int irqs[]; > +#if 0 > + int irq; > + struct work_struct irq_work; > + struct mutex mutex; > +#endif > +}; > + > +static irqreturn_t gsc_input_irq(int irq, void *data) > +{ > + const struct gsc_input_button_priv *button_priv = data; > + struct input_dev *input = button_priv->input; > + > + dev_dbg(&input->dev, "irq%d code=%d\n", irq, button_priv->button->code); > + input_report_key(input, button_priv->button->code, 1); > + input_sync(input); > + input_report_key(input, button_priv->button->code, 0); > + input_sync(input); > + > + return IRQ_HANDLED; Hmm, so in the end this is just a bunch of buttons connected to interrupt lines. We already have a driver for that, called gpio-keys. It can work in pure interrupt mode (i.e. do not need real GPIO pin, just interrupt, and it will generate key down and up events when interrupt arrives, with possible delay for the up event). Thanks.
On Sat, Mar 10, 2018 at 10:45 AM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote: > On Mon, Mar 05, 2018 at 02:02:41PM -0800, Tim Harvey wrote: >> Add support for dispatching Linux Input events for the various interrupts >> the Gateworks System Controller provides. >> >> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> >> Signed-off-by: Tim Harvey <tharvey@gateworks.com> >> --- >> v2: >> - reword Kconfig >> - revise license comment block >> - remove unnecessary read of status register >> - remove unnecessary setting of input->dev.parent >> - use dt bindings for irq to keycode mapping >> - add support for platform-data >> - remove work-queue >> >> drivers/input/misc/Kconfig | 9 ++ >> drivers/input/misc/Makefile | 1 + >> drivers/input/misc/gsc-input.c | 180 ++++++++++++++++++++++++++++++++ >> include/linux/platform_data/gsc_input.h | 30 ++++++ >> 4 files changed, 220 insertions(+) >> create mode 100644 drivers/input/misc/gsc-input.c >> create mode 100644 include/linux/platform_data/gsc_input.h >> >> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig >> index 9f082a3..e05f4fe 100644 >> --- a/drivers/input/misc/Kconfig >> +++ b/drivers/input/misc/Kconfig >> @@ -117,6 +117,15 @@ config INPUT_E3X0_BUTTON >> To compile this driver as a module, choose M here: the >> module will be called e3x0_button. >> >> +config INPUT_GSC >> + tristate "Gateworks System Controller input support" >> + depends on MFD_GSC >> + help >> + Support GSC events as Linux input events. >> + >> + To compile this driver as a module, choose M here: the >> + module will be called gsc_input. >> + >> config INPUT_PCSPKR >> tristate "PC Speaker support" >> depends on PCSPKR_PLATFORM >> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile >> index 4b6118d..969debe 100644 >> --- a/drivers/input/misc/Makefile >> +++ b/drivers/input/misc/Makefile >> @@ -38,6 +38,7 @@ obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o >> obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o >> obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o >> obj-$(CONFIG_INPUT_GPIO_DECODER) += gpio_decoder.o >> +obj-$(CONFIG_INPUT_GSC) += gsc-input.o >> obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o >> obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o >> obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o >> diff --git a/drivers/input/misc/gsc-input.c b/drivers/input/misc/gsc-input.c >> new file mode 100644 >> index 0000000..27b5e93 >> --- /dev/null >> +++ b/drivers/input/misc/gsc-input.c >> @@ -0,0 +1,180 @@ >> +/* SPDX-License-Identifier: GPL-2.0 >> + * >> + * Copyright (C) 2018 Gateworks Corporation >> + * >> + * This driver dispatches Linux input events for GSC interrupt events >> + */ >> +#include <linux/input.h> >> +#include <linux/interrupt.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/of_irq.h> >> +#include <linux/platform_device.h> >> +#include <linux/regmap.h> >> + >> +#include <linux/mfd/gsc.h> >> +#include <linux/platform_data/gsc_input.h> >> + >> +struct gsc_input_button_priv { >> + struct input_dev *input; >> + const struct gsc_input_button *button; >> +}; >> + >> +struct gsc_input_data { >> + struct gsc_dev *gsc; >> + struct gsc_input_platform_data *pdata; >> + struct input_dev *input; >> + struct gsc_input_button_priv *buttons; >> + int nbuttons; >> + unsigned int irqs[]; >> +#if 0 >> + int irq; >> + struct work_struct irq_work; >> + struct mutex mutex; >> +#endif >> +}; >> + >> +static irqreturn_t gsc_input_irq(int irq, void *data) >> +{ >> + const struct gsc_input_button_priv *button_priv = data; >> + struct input_dev *input = button_priv->input; >> + >> + dev_dbg(&input->dev, "irq%d code=%d\n", irq, button_priv->button->code); >> + input_report_key(input, button_priv->button->code, 1); >> + input_sync(input); >> + input_report_key(input, button_priv->button->code, 0); >> + input_sync(input); >> + >> + return IRQ_HANDLED; > > Hmm, so in the end this is just a bunch of buttons connected to > interrupt lines. We already have a driver for that, called gpio-keys. It > can work in pure interrupt mode (i.e. do not need real GPIO pin, just > interrupt, and it will generate key down and up events when interrupt > arrives, with possible delay for the up event). > Dmitry, Yes that's what it does and yes your correct the gpio-keys driver will work perfect for that. Thanks for calling me out on that - I had not realized the gpio-keys driver could work from 'interrupts'. I'll remove the input driver in my next submission. At least I know how to properly write an input driver now from your previous review :) Thanks, Tim -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 9f082a3..e05f4fe 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -117,6 +117,15 @@ config INPUT_E3X0_BUTTON To compile this driver as a module, choose M here: the module will be called e3x0_button. +config INPUT_GSC + tristate "Gateworks System Controller input support" + depends on MFD_GSC + help + Support GSC events as Linux input events. + + To compile this driver as a module, choose M here: the + module will be called gsc_input. + config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 4b6118d..969debe 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o obj-$(CONFIG_INPUT_GPIO_DECODER) += gpio_decoder.o +obj-$(CONFIG_INPUT_GSC) += gsc-input.o obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o diff --git a/drivers/input/misc/gsc-input.c b/drivers/input/misc/gsc-input.c new file mode 100644 index 0000000..27b5e93 --- /dev/null +++ b/drivers/input/misc/gsc-input.c @@ -0,0 +1,180 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright (C) 2018 Gateworks Corporation + * + * This driver dispatches Linux input events for GSC interrupt events + */ +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include <linux/mfd/gsc.h> +#include <linux/platform_data/gsc_input.h> + +struct gsc_input_button_priv { + struct input_dev *input; + const struct gsc_input_button *button; +}; + +struct gsc_input_data { + struct gsc_dev *gsc; + struct gsc_input_platform_data *pdata; + struct input_dev *input; + struct gsc_input_button_priv *buttons; + int nbuttons; + unsigned int irqs[]; +#if 0 + int irq; + struct work_struct irq_work; + struct mutex mutex; +#endif +}; + +static irqreturn_t gsc_input_irq(int irq, void *data) +{ + const struct gsc_input_button_priv *button_priv = data; + struct input_dev *input = button_priv->input; + + dev_dbg(&input->dev, "irq%d code=%d\n", irq, button_priv->button->code); + input_report_key(input, button_priv->button->code, 1); + input_sync(input); + input_report_key(input, button_priv->button->code, 0); + input_sync(input); + + return IRQ_HANDLED; +} + +static struct gsc_input_platform_data * +gsc_input_get_devtree_pdata(struct device *dev) +{ + struct gsc_input_platform_data *pdata; + struct fwnode_handle *child; + struct gsc_input_button *button; + int nbuttons; + + nbuttons = device_get_child_node_count(dev); + dev_dbg(dev, "buttons=%d\n", nbuttons); + if (nbuttons == 0) + return ERR_PTR(-ENODEV); + + pdata = devm_kzalloc(dev, + sizeof(*pdata) + nbuttons * sizeof(*button), + GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + button = (struct gsc_input_button *)(pdata + 1); + pdata->buttons = button; + pdata->nbuttons = nbuttons; + + device_property_read_string(dev, "label", &pdata->name); + + device_for_each_child_node(dev, child) { + if (is_of_node(child)) + button->irq = irq_of_parse_and_map(to_of_node(child), + 0); + if (fwnode_property_read_u32(child, "linux,code", + &button->code)) { + dev_err(dev, "Button without keycode\n"); + fwnode_handle_put(child); + return ERR_PTR(-EINVAL); + } + fwnode_property_read_string(child, "label", &button->desc); + button++; + } + + return pdata; +} + +static int gsc_input_probe(struct platform_device *pdev) +{ + struct gsc_dev *gsc = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct gsc_input_platform_data *pdata = dev_get_platdata(dev); + struct gsc_input_data *input; + int i, ret; + + if (!pdata) { + pdata = gsc_input_get_devtree_pdata(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } + + input = devm_kzalloc(dev, sizeof(*input), GFP_KERNEL); + if (!input) + return -ENOMEM; + input->gsc = gsc; + input->pdata = pdata; + + input->buttons = devm_kzalloc(dev, pdata->nbuttons * + sizeof(struct gsc_input_button_priv), + GFP_KERNEL); + if (!input->buttons) + return -ENOMEM; + + /* Register input device */ + input->input = devm_input_allocate_device(dev); + if (!input->input) { + dev_err(dev, "Can't allocate input device\n"); + return -ENOMEM; + } + input->input->name = pdata->name ? : pdev->name; + + platform_set_drvdata(pdev, gsc); + + for (i = 0; i < pdata->nbuttons; i++) { + const struct gsc_input_button *button = &pdata->buttons[i]; + struct gsc_input_button_priv *button_priv = &input->buttons[i]; + + button_priv = &input->buttons[i]; + button_priv->button = &pdata->buttons[i]; + button_priv->input = input->input; + input_set_capability(input->input, EV_KEY, button->code); + + ret = devm_request_threaded_irq(dev, button->irq, NULL, + gsc_input_irq, 0, + button->desc, + button_priv); + if (ret) { + dev_err(dev, "irq%d request failed: %d\n)", button->irq, + ret); + return ret; + } + dev_dbg(dev, "button: irq%d/%d code=%d %s\n", + button->irq - pdata->buttons[0].irq, + button->irq, + button->code, button->desc); + } + + ret = input_register_device(input->input); + if (ret < 0) { + dev_err(dev, "Can't register input device: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct of_device_id gsc_input_dt_ids[] = { + { .compatible = "gw,gsc-input", }, + {} +}; + +static struct platform_driver gsc_input_driver = { + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = gsc_input_dt_ids, + }, + .probe = gsc_input_probe, +}; + +module_platform_driver(gsc_input_driver); + +MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>"); +MODULE_DESCRIPTION("GSC input driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/gsc_input.h b/include/linux/platform_data/gsc_input.h new file mode 100644 index 0000000..1a34284 --- /dev/null +++ b/include/linux/platform_data/gsc_input.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _GSC_INPUT_H +#define _GSC_INPUT_H + +/** + * struct gsc_input_button - configuration parameters + * @code: input event code (KEY_*, SW_*) + * @irq: irq index + * @desc: name of interrupt + */ +struct gsc_input_button { + unsigned int irq; + unsigned int code; + const char *desc; +}; + +/** + * struct gsc_input_platform_data - platform data for gsc_input driver + * @buttons: pointer to array of gsc_input_button structures + * describing buttons mapped to interrupt events + * @nbuttons: number of elements in @buttons array + * @name: input device name + */ +struct gsc_input_platform_data { + const struct gsc_input_button *buttons; + int nbuttons; + const char *name; +}; + +#endif
Add support for dispatching Linux Input events for the various interrupts the Gateworks System Controller provides. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- v2: - reword Kconfig - revise license comment block - remove unnecessary read of status register - remove unnecessary setting of input->dev.parent - use dt bindings for irq to keycode mapping - add support for platform-data - remove work-queue drivers/input/misc/Kconfig | 9 ++ drivers/input/misc/Makefile | 1 + drivers/input/misc/gsc-input.c | 180 ++++++++++++++++++++++++++++++++ include/linux/platform_data/gsc_input.h | 30 ++++++ 4 files changed, 220 insertions(+) create mode 100644 drivers/input/misc/gsc-input.c create mode 100644 include/linux/platform_data/gsc_input.h