diff mbox

[v2,09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file

Message ID 1521193101-4586-10-git-send-email-sricharan@codeaurora.org (mailing list archive)
State New, archived
Headers show

Commit Message

Sricharan Ramabadhran March 16, 2018, 9:38 a.m. UTC 
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
 arch/arm/boot/dts/Makefile                      |  1 +
 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 65 +++++++++++++++++++++++++
 2 files changed, 66 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts

Comments

Abhishek Sahu March 16, 2018, 10:25 a.m. UTC | #1 
On 2018-03-16 15:08, Sricharan R wrote:
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
>  arch/arm/boot/dts/Makefile                      |  1 +
>  arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 65 
> +++++++++++++++++++++++++
>  2 files changed, 66 insertions(+)
>  create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b71487a..8c93fd0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -749,6 +749,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>  	qcom-ipq4019-ap.dk01.1-c1.dtb \
>  	qcom-ipq4019-ap.dk04.1-c1.dtb \
>  	qcom-ipq4019-ap.dk04.1-c3.dtb \
> +	qcom-ipq4019-ap.dk07.1-c1.dtb \
>  	qcom-ipq8064-ap148.dtb \
>  	qcom-msm8660-surf.dtb \
>  	qcom-msm8960-cdp.dtb \
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> new file mode 100644
> index 0000000..4562f7f
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> @@ -0,0 +1,65 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> +
> +#include "qcom-ipq4019-ap.dk07.1.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK07.1-C1";

  s/IPQ40xx/IPQ4019

  with that.

  Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>

> +
> +	soc {
> +		pcie0: pci@40000000 {
> +			status = "ok";
> +			perst-gpio = <&tlmm 38 0x1>;
> +		};
> +
> +		spi_1: spi@78b6000 { /* BLSP1 QUP2 */
> +			status = "ok";
> +		};
> +
> +		pinctrl@1000000 {
> +			serial_1_pins: serial1_pinmux {
> +				mux {
> +					pins = "gpio8", "gpio9",
> +						"gpio10", "gpio11";
> +					function = "blsp_uart1";
> +					bias-disable;
> +				};
> +			};
> +
> +			spi_0_pins: spi_0_pinmux {
> +				pinmux {
> +					function = "blsp_spi0";
> +					pins = "gpio13", "gpio14", "gpio15";
> +					bias-disable;
> +				};
> +				pinmux_cs {
> +					function = "gpio";
> +					pins = "gpio12";
> +					bias-disable;
> +					output-high;
> +				};
> +			};
> +		};
> +
> +		serial@78b0000 {
> +			pinctrl-0 = <&serial_1_pins>;
> +			pinctrl-names = "default";
> +			status = "ok";
> +		};
> +
> +		spi_0: spi@78b5000 { /* BLSP1 QUP1 */
> +			pinctrl-0 = <&spi_0_pins>;
> +			pinctrl-names = "default";
> +			status = "ok";
> +			cs-gpios = <&tlmm 12 0>;
> +
> +			m25p80@0 {
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				reg = <0>;
> +				compatible = "n25q128a11";
> +				spi-max-frequency = <24000000>;
> +			};
> +		};
> +	};
> +};
Sricharan Ramabadhran March 16, 2018, 12:45 p.m. UTC | #2 
On 3/16/2018 3:55 PM, Abhishek Sahu wrote:
> On 2018-03-16 15:08, Sricharan R wrote:
>> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
>> ---
>>  arch/arm/boot/dts/Makefile                      |  1 +
>>  arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 65 +++++++++++++++++++++++++
>>  2 files changed, 66 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index b71487a..8c93fd0 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -749,6 +749,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>>      qcom-ipq4019-ap.dk01.1-c1.dtb \
>>      qcom-ipq4019-ap.dk04.1-c1.dtb \
>>      qcom-ipq4019-ap.dk04.1-c3.dtb \
>> +    qcom-ipq4019-ap.dk07.1-c1.dtb \
>>      qcom-ipq8064-ap148.dtb \
>>      qcom-msm8660-surf.dtb \
>>      qcom-msm8960-cdp.dtb \
>> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
>> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
>> new file mode 100644
>> index 0000000..4562f7f
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
>> @@ -0,0 +1,65 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
>> +
>> +#include "qcom-ipq4019-ap.dk07.1.dtsi"
>> +
>> +/ {
>> +    model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK07.1-C1";
> 
>  s/IPQ40xx/IPQ4019
> 
>  with that.
> 
>  Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
  Thanks, will update

Regards,
 Sricharan
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b71487a..8c93fd0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -749,6 +749,7 @@  dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq4019-ap.dk01.1-c1.dtb \
 	qcom-ipq4019-ap.dk04.1-c1.dtb \
 	qcom-ipq4019-ap.dk04.1-c3.dtb \
+	qcom-ipq4019-ap.dk07.1-c1.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
new file mode 100644
index 0000000..4562f7f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -0,0 +1,65 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk07.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK07.1-C1";
+
+	soc {
+		pcie0: pci@40000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 38 0x1>;
+		};
+
+		spi_1: spi@78b6000 { /* BLSP1 QUP2 */
+			status = "ok";
+		};
+
+		pinctrl@1000000 {
+			serial_1_pins: serial1_pinmux {
+				mux {
+					pins = "gpio8", "gpio9",
+						"gpio10", "gpio11";
+					function = "blsp_uart1";
+					bias-disable;
+				};
+			};
+
+			spi_0_pins: spi_0_pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio13", "gpio14", "gpio15";
+					bias-disable;
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio12";
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP1 */
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+			cs-gpios = <&tlmm 12 0>;
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				spi-max-frequency = <24000000>;
+			};
+		};
+	};
+};