| Message ID | 1521228359-32396-3-git-send-email-eajames@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
On Fri, Mar 16, 2018 at 02:25:59PM -0500, Eddie James wrote: > From: Christopher Bostic <cbostic@linux.vnet.ibm.com> > > Expose the gpiN_fault fields of mfr_status as individual debugfs > attributes. This provides a way for users to be easily notified of gpi > faults. Also provide the whole mfr_status register in debugfs. > > Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> > Signed-off-by: Andrew Jeffery <andrew@aj.id.au> > Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> > --- > drivers/hwmon/pmbus/ucd9000.c | 138 +++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 137 insertions(+), 1 deletion(-) > > diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c > index ef2c5bf..88c98fb 100644 > --- a/drivers/hwmon/pmbus/ucd9000.c > +++ b/drivers/hwmon/pmbus/ucd9000.c > @@ -19,6 +19,7 @@ > * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > */ > > +#include <linux/debugfs.h> > #include <linux/kernel.h> > #include <linux/module.h> > #include <linux/of_device.h> > @@ -37,6 +38,7 @@ > #define UCD9000_NUM_PAGES 0xd6 > #define UCD9000_FAN_CONFIG_INDEX 0xe7 > #define UCD9000_FAN_CONFIG 0xe8 > +#define UCD9000_MFR_STATUS 0xf3 > #define UCD9000_GPIO_SELECT 0xfa > #define UCD9000_GPIO_CONFIG 0xfb > #define UCD9000_DEVICE_ID 0xfd > @@ -64,15 +66,24 @@ > #define UCD901XX_NUM_GPIOS 26 > #define UCD90910_NUM_GPIOS 26 > > +#define UCD9000_DEBUGFS_NAME_LEN 24 > +#define UCD9000_GPI_COUNT 8 > + > struct ucd9000_data { > u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; > struct pmbus_driver_info info; > #ifdef CONFIG_GPIOLIB > struct gpio_chip gpio; > #endif > + struct dentry *debugfs; > }; > #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) > > +struct ucd9000_debugfs_entry { > + struct i2c_client *client; > + u8 index; > +}; > + > static int ucd9000_get_fan_config(struct i2c_client *client, int fan) > { > int fan_config = 0; > @@ -359,6 +370,122 @@ static void ucd9000_probe_gpio(struct i2c_client *client, > } > #endif /* CONFIG_GPIOLIB */ > > +#ifdef CONFIG_DEBUG_FS > +static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer) > +{ > + int ret = pmbus_set_page(client, 0); > + > + if (ret < 0) > + return ret; > + > + return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer); > +} > + > +static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val) > +{ > + struct ucd9000_debugfs_entry *entry = data; > + struct i2c_client *client = entry->client; > + u8 buffer[I2C_SMBUS_BLOCK_MAX]; > + int ret; > + > + ret = ucd9000_get_mfr_status(client, buffer); > + if (ret < 0) > + return ret; > + > + /* > + * Attribute only created for devices with gpi fault bits at bits > + * 16-23, which is the second byte of the response. > + */ > + *val = !!(buffer[1] & BIT(entry->index)); > + > + return 0; > +} > +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit, > + ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n"); > + > +static ssize_t ucd9000_debugfs_read_mfr_status(struct file *file, > + char __user *buf, size_t count, > + loff_t *ppos) > +{ > + struct i2c_client *client = file->private_data; > + u8 buffer[I2C_SMBUS_BLOCK_MAX]; > + char str[(I2C_SMBUS_BLOCK_MAX * 2) + 2]; > + char *res; > + int rc; > + > + rc = ucd9000_get_mfr_status(client, buffer); > + if (rc < 0) > + return rc; > + > + res = bin2hex(str, buffer, min(rc, I2C_SMBUS_BLOCK_MAX)); > + *res++ = '\n'; > + *res++ = 0; > + Unless I am missing something, this now returns the terminating '\0' to the user. Is this really what you want ? I see other code adding the terminator, but it doesn't usually return it to the user. Guenter > + return simple_read_from_buffer(buf, count, ppos, str, res - str); > +} > + > +static const struct file_operations ucd9000_debugfs_show_mfr_status_fops = { > + .llseek = noop_llseek, > + .read = ucd9000_debugfs_read_mfr_status, > + .open = simple_open, > +}; > + > +static int ucd9000_init_debugfs(struct i2c_client *client, > + const struct i2c_device_id *mid, > + struct ucd9000_data *data) > +{ > + struct dentry *debugfs; > + struct ucd9000_debugfs_entry *entries; > + int i; > + char name[UCD9000_DEBUGFS_NAME_LEN]; > + > + debugfs = pmbus_get_debugfs_dir(client); > + if (!debugfs) > + return -ENOENT; > + > + data->debugfs = debugfs_create_dir(client->name, debugfs); > + if (!data->debugfs) > + return -ENOENT; > + > + /* > + * Of the chips this driver supports, only the UCD9090, UCD90160, > + * and UCD90910 report GPI faults in their MFR_STATUS register, so only > + * create the GPI fault debugfs attributes for those chips. > + */ > + if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 || > + mid->driver_data == ucd90910) { > + entries = devm_kzalloc(&client->dev, > + sizeof(*entries) * UCD9000_GPI_COUNT, > + GFP_KERNEL); > + if (!entries) > + return -ENOMEM; > + > + for (i = 0; i < UCD9000_GPI_COUNT; i++) { > + entries[i].client = client; > + entries[i].index = i; > + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, > + "gpi%d_alarm", i + 1); > + debugfs_create_file(name, 0444, data->debugfs, > + &entries[i], > + &ucd9000_debugfs_mfr_status_bit); > + } > + } > + > + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, "mfr_status"); > + debugfs_create_file(name, 0444, data->debugfs, client, > + &ucd9000_debugfs_show_mfr_status_fops); > + > + return 0; > +} > +#else > +static int ucd9000_init_debugfs(struct i2c_client *client, > + const struct i2c_device_id *mid, > + struct ucd9000_data *data) > +{ > + return 0; > +} > +#endif /* CONFIG_DEBUG_FS */ > + > static int ucd9000_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > @@ -475,7 +602,16 @@ static int ucd9000_probe(struct i2c_client *client, > > ucd9000_probe_gpio(client, mid, data); > > - return pmbus_do_probe(client, mid, info); > + ret = pmbus_do_probe(client, mid, info); > + if (ret) > + return ret; > + > + ret = ucd9000_init_debugfs(client, mid, data); > + if (ret) > + dev_warn(&client->dev, "Failed to register debugfs: %d\n", > + ret); > + > + return 0; > } > > /* This is the driver that will be inserted */ > -- > 1.8.3.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03/16/2018 02:59 PM, Guenter Roeck wrote: > On Fri, Mar 16, 2018 at 02:25:59PM -0500, Eddie James wrote: >> From: Christopher Bostic <cbostic@linux.vnet.ibm.com> >> >> Expose the gpiN_fault fields of mfr_status as individual debugfs >> attributes. This provides a way for users to be easily notified of gpi >> faults. Also provide the whole mfr_status register in debugfs. >> >> Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> >> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> >> Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> >> --- >> drivers/hwmon/pmbus/ucd9000.c | 138 +++++++++++++++++++++++++++++++++++++++++- >> 1 file changed, 137 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c >> index ef2c5bf..88c98fb 100644 >> --- a/drivers/hwmon/pmbus/ucd9000.c >> +++ b/drivers/hwmon/pmbus/ucd9000.c >> @@ -19,6 +19,7 @@ >> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. >> */ >> >> +#include <linux/debugfs.h> >> #include <linux/kernel.h> >> #include <linux/module.h> >> #include <linux/of_device.h> >> @@ -37,6 +38,7 @@ >> #define UCD9000_NUM_PAGES 0xd6 >> #define UCD9000_FAN_CONFIG_INDEX 0xe7 >> #define UCD9000_FAN_CONFIG 0xe8 >> +#define UCD9000_MFR_STATUS 0xf3 >> #define UCD9000_GPIO_SELECT 0xfa >> #define UCD9000_GPIO_CONFIG 0xfb >> #define UCD9000_DEVICE_ID 0xfd >> @@ -64,15 +66,24 @@ >> #define UCD901XX_NUM_GPIOS 26 >> #define UCD90910_NUM_GPIOS 26 >> >> +#define UCD9000_DEBUGFS_NAME_LEN 24 >> +#define UCD9000_GPI_COUNT 8 >> + >> struct ucd9000_data { >> u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; >> struct pmbus_driver_info info; >> #ifdef CONFIG_GPIOLIB >> struct gpio_chip gpio; >> #endif >> + struct dentry *debugfs; >> }; >> #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) >> >> +struct ucd9000_debugfs_entry { >> + struct i2c_client *client; >> + u8 index; >> +}; >> + >> static int ucd9000_get_fan_config(struct i2c_client *client, int fan) >> { >> int fan_config = 0; >> @@ -359,6 +370,122 @@ static void ucd9000_probe_gpio(struct i2c_client *client, >> } >> #endif /* CONFIG_GPIOLIB */ >> >> +#ifdef CONFIG_DEBUG_FS >> +static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer) >> +{ >> + int ret = pmbus_set_page(client, 0); >> + >> + if (ret < 0) >> + return ret; >> + >> + return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer); >> +} >> + >> +static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val) >> +{ >> + struct ucd9000_debugfs_entry *entry = data; >> + struct i2c_client *client = entry->client; >> + u8 buffer[I2C_SMBUS_BLOCK_MAX]; >> + int ret; >> + >> + ret = ucd9000_get_mfr_status(client, buffer); >> + if (ret < 0) >> + return ret; >> + >> + /* >> + * Attribute only created for devices with gpi fault bits at bits >> + * 16-23, which is the second byte of the response. >> + */ >> + *val = !!(buffer[1] & BIT(entry->index)); >> + >> + return 0; >> +} >> +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit, >> + ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n"); >> + >> +static ssize_t ucd9000_debugfs_read_mfr_status(struct file *file, >> + char __user *buf, size_t count, >> + loff_t *ppos) >> +{ >> + struct i2c_client *client = file->private_data; >> + u8 buffer[I2C_SMBUS_BLOCK_MAX]; >> + char str[(I2C_SMBUS_BLOCK_MAX * 2) + 2]; >> + char *res; >> + int rc; >> + >> + rc = ucd9000_get_mfr_status(client, buffer); >> + if (rc < 0) >> + return rc; >> + >> + res = bin2hex(str, buffer, min(rc, I2C_SMBUS_BLOCK_MAX)); >> + *res++ = '\n'; >> + *res++ = 0; >> + > Unless I am missing something, this now returns the terminating '\0' > to the user. Is this really what you want ? Yes, that was my intention. I thought that was normal. It worked fine when I cat'ed the file. Up to you, I can change it if you like. Thanks, Eddie > > I see other code adding the terminator, but it doesn't usually return it > to the user. > > Guenter > >> + return simple_read_from_buffer(buf, count, ppos, str, res - str); >> +} >> + >> +static const struct file_operations ucd9000_debugfs_show_mfr_status_fops = { >> + .llseek = noop_llseek, >> + .read = ucd9000_debugfs_read_mfr_status, >> + .open = simple_open, >> +}; >> + >> +static int ucd9000_init_debugfs(struct i2c_client *client, >> + const struct i2c_device_id *mid, >> + struct ucd9000_data *data) >> +{ >> + struct dentry *debugfs; >> + struct ucd9000_debugfs_entry *entries; >> + int i; >> + char name[UCD9000_DEBUGFS_NAME_LEN]; >> + >> + debugfs = pmbus_get_debugfs_dir(client); >> + if (!debugfs) >> + return -ENOENT; >> + >> + data->debugfs = debugfs_create_dir(client->name, debugfs); >> + if (!data->debugfs) >> + return -ENOENT; >> + >> + /* >> + * Of the chips this driver supports, only the UCD9090, UCD90160, >> + * and UCD90910 report GPI faults in their MFR_STATUS register, so only >> + * create the GPI fault debugfs attributes for those chips. >> + */ >> + if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 || >> + mid->driver_data == ucd90910) { >> + entries = devm_kzalloc(&client->dev, >> + sizeof(*entries) * UCD9000_GPI_COUNT, >> + GFP_KERNEL); >> + if (!entries) >> + return -ENOMEM; >> + >> + for (i = 0; i < UCD9000_GPI_COUNT; i++) { >> + entries[i].client = client; >> + entries[i].index = i; >> + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, >> + "gpi%d_alarm", i + 1); >> + debugfs_create_file(name, 0444, data->debugfs, >> + &entries[i], >> + &ucd9000_debugfs_mfr_status_bit); >> + } >> + } >> + >> + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, "mfr_status"); >> + debugfs_create_file(name, 0444, data->debugfs, client, >> + &ucd9000_debugfs_show_mfr_status_fops); >> + >> + return 0; >> +} >> +#else >> +static int ucd9000_init_debugfs(struct i2c_client *client, >> + const struct i2c_device_id *mid, >> + struct ucd9000_data *data) >> +{ >> + return 0; >> +} >> +#endif /* CONFIG_DEBUG_FS */ >> + >> static int ucd9000_probe(struct i2c_client *client, >> const struct i2c_device_id *id) >> { >> @@ -475,7 +602,16 @@ static int ucd9000_probe(struct i2c_client *client, >> >> ucd9000_probe_gpio(client, mid, data); >> >> - return pmbus_do_probe(client, mid, info); >> + ret = pmbus_do_probe(client, mid, info); >> + if (ret) >> + return ret; >> + >> + ret = ucd9000_init_debugfs(client, mid, data); >> + if (ret) >> + dev_warn(&client->dev, "Failed to register debugfs: %d\n", >> + ret); >> + >> + return 0; >> } >> >> /* This is the driver that will be inserted */ >> -- >> 1.8.3.1 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Mar 16, 2018 at 03:04:47PM -0500, Eddie James wrote: > > > On 03/16/2018 02:59 PM, Guenter Roeck wrote: > >On Fri, Mar 16, 2018 at 02:25:59PM -0500, Eddie James wrote: > >>From: Christopher Bostic <cbostic@linux.vnet.ibm.com> > >> > >>Expose the gpiN_fault fields of mfr_status as individual debugfs > >>attributes. This provides a way for users to be easily notified of gpi > >>faults. Also provide the whole mfr_status register in debugfs. > >> > >>Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> > >>Signed-off-by: Andrew Jeffery <andrew@aj.id.au> > >>Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> > >>--- > >> drivers/hwmon/pmbus/ucd9000.c | 138 +++++++++++++++++++++++++++++++++++++++++- > >> 1 file changed, 137 insertions(+), 1 deletion(-) > >> > >>diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c > >>index ef2c5bf..88c98fb 100644 > >>--- a/drivers/hwmon/pmbus/ucd9000.c > >>+++ b/drivers/hwmon/pmbus/ucd9000.c > >>@@ -19,6 +19,7 @@ > >> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > >> */ > >>+#include <linux/debugfs.h> > >> #include <linux/kernel.h> > >> #include <linux/module.h> > >> #include <linux/of_device.h> > >>@@ -37,6 +38,7 @@ > >> #define UCD9000_NUM_PAGES 0xd6 > >> #define UCD9000_FAN_CONFIG_INDEX 0xe7 > >> #define UCD9000_FAN_CONFIG 0xe8 > >>+#define UCD9000_MFR_STATUS 0xf3 > >> #define UCD9000_GPIO_SELECT 0xfa > >> #define UCD9000_GPIO_CONFIG 0xfb > >> #define UCD9000_DEVICE_ID 0xfd > >>@@ -64,15 +66,24 @@ > >> #define UCD901XX_NUM_GPIOS 26 > >> #define UCD90910_NUM_GPIOS 26 > >>+#define UCD9000_DEBUGFS_NAME_LEN 24 > >>+#define UCD9000_GPI_COUNT 8 > >>+ > >> struct ucd9000_data { > >> u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; > >> struct pmbus_driver_info info; > >> #ifdef CONFIG_GPIOLIB > >> struct gpio_chip gpio; > >> #endif > >>+ struct dentry *debugfs; > >> }; > >> #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) > >>+struct ucd9000_debugfs_entry { > >>+ struct i2c_client *client; > >>+ u8 index; > >>+}; > >>+ > >> static int ucd9000_get_fan_config(struct i2c_client *client, int fan) > >> { > >> int fan_config = 0; > >>@@ -359,6 +370,122 @@ static void ucd9000_probe_gpio(struct i2c_client *client, > >> } > >> #endif /* CONFIG_GPIOLIB */ > >>+#ifdef CONFIG_DEBUG_FS > >>+static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer) > >>+{ > >>+ int ret = pmbus_set_page(client, 0); > >>+ > >>+ if (ret < 0) > >>+ return ret; > >>+ > >>+ return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer); > >>+} > >>+ > >>+static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val) > >>+{ > >>+ struct ucd9000_debugfs_entry *entry = data; > >>+ struct i2c_client *client = entry->client; > >>+ u8 buffer[I2C_SMBUS_BLOCK_MAX]; > >>+ int ret; > >>+ > >>+ ret = ucd9000_get_mfr_status(client, buffer); > >>+ if (ret < 0) > >>+ return ret; > >>+ > >>+ /* > >>+ * Attribute only created for devices with gpi fault bits at bits > >>+ * 16-23, which is the second byte of the response. > >>+ */ > >>+ *val = !!(buffer[1] & BIT(entry->index)); > >>+ > >>+ return 0; > >>+} > >>+DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit, > >>+ ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n"); > >>+ > >>+static ssize_t ucd9000_debugfs_read_mfr_status(struct file *file, > >>+ char __user *buf, size_t count, > >>+ loff_t *ppos) > >>+{ > >>+ struct i2c_client *client = file->private_data; > >>+ u8 buffer[I2C_SMBUS_BLOCK_MAX]; > >>+ char str[(I2C_SMBUS_BLOCK_MAX * 2) + 2]; > >>+ char *res; > >>+ int rc; > >>+ > >>+ rc = ucd9000_get_mfr_status(client, buffer); > >>+ if (rc < 0) > >>+ return rc; > >>+ > >>+ res = bin2hex(str, buffer, min(rc, I2C_SMBUS_BLOCK_MAX)); > >>+ *res++ = '\n'; > >>+ *res++ = 0; > >>+ > >Unless I am missing something, this now returns the terminating '\0' > >to the user. Is this really what you want ? > > Yes, that was my intention. I thought that was normal. It worked fine when I > cat'ed the file. Up to you, I can change it if you like. > Please do. I suspect that you'll see the '\0' if you send the output to od. That is unexpected. I browsed through the kernel and was unable to find any other code doing the same, so we should not be the ones starting it. Example is DEFINE_DEBUGFS_ATTRIBUTE, which ends up calling simple_attr_read(). This in turn passes the result of scnprintf() or strlen() to simple_read_from_buffer(). Both not include the terminating '\0'. Thanks, Guenter > Thanks, > Eddie > > > > >I see other code adding the terminator, but it doesn't usually return it > >to the user. > > > >Guenter > > > >>+ return simple_read_from_buffer(buf, count, ppos, str, res - str); > >>+} > >>+ > >>+static const struct file_operations ucd9000_debugfs_show_mfr_status_fops = { > >>+ .llseek = noop_llseek, > >>+ .read = ucd9000_debugfs_read_mfr_status, > >>+ .open = simple_open, > >>+}; > >>+ > >>+static int ucd9000_init_debugfs(struct i2c_client *client, > >>+ const struct i2c_device_id *mid, > >>+ struct ucd9000_data *data) > >>+{ > >>+ struct dentry *debugfs; > >>+ struct ucd9000_debugfs_entry *entries; > >>+ int i; > >>+ char name[UCD9000_DEBUGFS_NAME_LEN]; > >>+ > >>+ debugfs = pmbus_get_debugfs_dir(client); > >>+ if (!debugfs) > >>+ return -ENOENT; > >>+ > >>+ data->debugfs = debugfs_create_dir(client->name, debugfs); > >>+ if (!data->debugfs) > >>+ return -ENOENT; > >>+ > >>+ /* > >>+ * Of the chips this driver supports, only the UCD9090, UCD90160, > >>+ * and UCD90910 report GPI faults in their MFR_STATUS register, so only > >>+ * create the GPI fault debugfs attributes for those chips. > >>+ */ > >>+ if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 || > >>+ mid->driver_data == ucd90910) { > >>+ entries = devm_kzalloc(&client->dev, > >>+ sizeof(*entries) * UCD9000_GPI_COUNT, > >>+ GFP_KERNEL); > >>+ if (!entries) > >>+ return -ENOMEM; > >>+ > >>+ for (i = 0; i < UCD9000_GPI_COUNT; i++) { > >>+ entries[i].client = client; > >>+ entries[i].index = i; > >>+ scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, > >>+ "gpi%d_alarm", i + 1); > >>+ debugfs_create_file(name, 0444, data->debugfs, > >>+ &entries[i], > >>+ &ucd9000_debugfs_mfr_status_bit); > >>+ } > >>+ } > >>+ > >>+ scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, "mfr_status"); > >>+ debugfs_create_file(name, 0444, data->debugfs, client, > >>+ &ucd9000_debugfs_show_mfr_status_fops); > >>+ > >>+ return 0; > >>+} > >>+#else > >>+static int ucd9000_init_debugfs(struct i2c_client *client, > >>+ const struct i2c_device_id *mid, > >>+ struct ucd9000_data *data) > >>+{ > >>+ return 0; > >>+} > >>+#endif /* CONFIG_DEBUG_FS */ > >>+ > >> static int ucd9000_probe(struct i2c_client *client, > >> const struct i2c_device_id *id) > >> { > >>@@ -475,7 +602,16 @@ static int ucd9000_probe(struct i2c_client *client, > >> ucd9000_probe_gpio(client, mid, data); > >>- return pmbus_do_probe(client, mid, info); > >>+ ret = pmbus_do_probe(client, mid, info); > >>+ if (ret) > >>+ return ret; > >>+ > >>+ ret = ucd9000_init_debugfs(client, mid, data); > >>+ if (ret) > >>+ dev_warn(&client->dev, "Failed to register debugfs: %d\n", > >>+ ret); > >>+ > >>+ return 0; > >> } > >> /* This is the driver that will be inserted */ > >>-- > >>1.8.3.1 > >> > >>-- > >>To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in > >>the body of a message to majordomo@vger.kernel.org > >>More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index ef2c5bf..88c98fb 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -19,6 +19,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/debugfs.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_device.h> @@ -37,6 +38,7 @@ #define UCD9000_NUM_PAGES 0xd6 #define UCD9000_FAN_CONFIG_INDEX 0xe7 #define UCD9000_FAN_CONFIG 0xe8 +#define UCD9000_MFR_STATUS 0xf3 #define UCD9000_GPIO_SELECT 0xfa #define UCD9000_GPIO_CONFIG 0xfb #define UCD9000_DEVICE_ID 0xfd @@ -64,15 +66,24 @@ #define UCD901XX_NUM_GPIOS 26 #define UCD90910_NUM_GPIOS 26 +#define UCD9000_DEBUGFS_NAME_LEN 24 +#define UCD9000_GPI_COUNT 8 + struct ucd9000_data { u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; struct pmbus_driver_info info; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; #endif + struct dentry *debugfs; }; #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) +struct ucd9000_debugfs_entry { + struct i2c_client *client; + u8 index; +}; + static int ucd9000_get_fan_config(struct i2c_client *client, int fan) { int fan_config = 0; @@ -359,6 +370,122 @@ static void ucd9000_probe_gpio(struct i2c_client *client, } #endif /* CONFIG_GPIOLIB */ +#ifdef CONFIG_DEBUG_FS +static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer) +{ + int ret = pmbus_set_page(client, 0); + + if (ret < 0) + return ret; + + return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer); +} + +static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val) +{ + struct ucd9000_debugfs_entry *entry = data; + struct i2c_client *client = entry->client; + u8 buffer[I2C_SMBUS_BLOCK_MAX]; + int ret; + + ret = ucd9000_get_mfr_status(client, buffer); + if (ret < 0) + return ret; + + /* + * Attribute only created for devices with gpi fault bits at bits + * 16-23, which is the second byte of the response. + */ + *val = !!(buffer[1] & BIT(entry->index)); + + return 0; +} +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit, + ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n"); + +static ssize_t ucd9000_debugfs_read_mfr_status(struct file *file, + char __user *buf, size_t count, + loff_t *ppos) +{ + struct i2c_client *client = file->private_data; + u8 buffer[I2C_SMBUS_BLOCK_MAX]; + char str[(I2C_SMBUS_BLOCK_MAX * 2) + 2]; + char *res; + int rc; + + rc = ucd9000_get_mfr_status(client, buffer); + if (rc < 0) + return rc; + + res = bin2hex(str, buffer, min(rc, I2C_SMBUS_BLOCK_MAX)); + *res++ = '\n'; + *res++ = 0; + + return simple_read_from_buffer(buf, count, ppos, str, res - str); +} + +static const struct file_operations ucd9000_debugfs_show_mfr_status_fops = { + .llseek = noop_llseek, + .read = ucd9000_debugfs_read_mfr_status, + .open = simple_open, +}; + +static int ucd9000_init_debugfs(struct i2c_client *client, + const struct i2c_device_id *mid, + struct ucd9000_data *data) +{ + struct dentry *debugfs; + struct ucd9000_debugfs_entry *entries; + int i; + char name[UCD9000_DEBUGFS_NAME_LEN]; + + debugfs = pmbus_get_debugfs_dir(client); + if (!debugfs) + return -ENOENT; + + data->debugfs = debugfs_create_dir(client->name, debugfs); + if (!data->debugfs) + return -ENOENT; + + /* + * Of the chips this driver supports, only the UCD9090, UCD90160, + * and UCD90910 report GPI faults in their MFR_STATUS register, so only + * create the GPI fault debugfs attributes for those chips. + */ + if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 || + mid->driver_data == ucd90910) { + entries = devm_kzalloc(&client->dev, + sizeof(*entries) * UCD9000_GPI_COUNT, + GFP_KERNEL); + if (!entries) + return -ENOMEM; + + for (i = 0; i < UCD9000_GPI_COUNT; i++) { + entries[i].client = client; + entries[i].index = i; + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, + "gpi%d_alarm", i + 1); + debugfs_create_file(name, 0444, data->debugfs, + &entries[i], + &ucd9000_debugfs_mfr_status_bit); + } + } + + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, "mfr_status"); + debugfs_create_file(name, 0444, data->debugfs, client, + &ucd9000_debugfs_show_mfr_status_fops); + + return 0; +} +#else +static int ucd9000_init_debugfs(struct i2c_client *client, + const struct i2c_device_id *mid, + struct ucd9000_data *data) +{ + return 0; +} +#endif /* CONFIG_DEBUG_FS */ + static int ucd9000_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -475,7 +602,16 @@ static int ucd9000_probe(struct i2c_client *client, ucd9000_probe_gpio(client, mid, data); - return pmbus_do_probe(client, mid, info); + ret = pmbus_do_probe(client, mid, info); + if (ret) + return ret; + + ret = ucd9000_init_debugfs(client, mid, data); + if (ret) + dev_warn(&client->dev, "Failed to register debugfs: %d\n", + ret); + + return 0; } /* This is the driver that will be inserted */