| Message ID | 20180309210958.16672-3-georgi.djakov@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Fri 09 Mar 13:09 PST 2018, Georgi Djakov wrote: > diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt [..] > +Required properties: > +- compatible : contains the interconnect provider vendor specific compatible > + string > +- reg : register space of the interconnect controller hardware These properties doesn't relate to the interconnect provider, so there's no need to describe them here. > + > +Examples: > + > + snoc: snoc@580000 { These nodes should be described in a qcom/msm8916 binding document. > + compatible = "qcom,msm8916-snoc"; > + reg = <0x580000 0x14000>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, <&rpmcc RPM_SMD_SNOC_A_CLK>; > + status = "okay"; > + }; Regards, Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Bjorn, On 03/19/2018 06:50 AM, Bjorn Andersson wrote: > On Fri 09 Mar 13:09 PST 2018, Georgi Djakov wrote: >> diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt > [..] >> +Required properties: >> +- compatible : contains the interconnect provider vendor specific compatible >> + string >> +- reg : register space of the interconnect controller hardware > > These properties doesn't relate to the interconnect provider, so there's > no need to describe them here. Agree. > >> + >> +Examples: >> + >> + snoc: snoc@580000 { > > These nodes should be described in a qcom/msm8916 binding document. Ok, will move this and the above to the platform specific binding documentation. > >> + compatible = "qcom,msm8916-snoc"; >> + reg = <0x580000 0x14000>; >> + clock-names = "bus_clk", "bus_a_clk"; >> + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, <&rpmcc RPM_SMD_SNOC_A_CLK>; >> + status = "okay"; >> + }; Thanks for the comments! BR, Georgi -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/03/2018 22:09, Georgi Djakov wrote: > This binding is intended to represent the interconnect hardware present > in some of the modern SoCs. Currently it consists only of a binding for > the interconnect hardware devices (provider). > > Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> > --- > .../bindings/interconnect/interconnect.txt | 47 ++++++++++++++++++++++ > 1 file changed, 47 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interconnect/interconnect.txt > > diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt > new file mode 100644 > index 000000000000..70612bb201e4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt > @@ -0,0 +1,47 @@ > +Interconnect Provider Device Tree Bindings > +========================================= > + > +The purpose of this document is to define a common set of generic interconnect > +providers/consumers properties. > + > + > += interconnect providers = > + > +The interconnect provider binding is intended to represent the interconnect > +controllers in the system. Each provider registers a set of interconnect > +nodes, which expose the interconnect related capabilities of the interconnect > +to consumer drivers. These capabilities can be throughput, latency, priority > +etc. The consumer drivers set constraints on interconnect path (or endpoints) > +depending on the usecase. Interconnect providers can also be interconnect > +consumers, such as in the case where two network-on-chip fabrics interface > +directly Hi, Can't we specify the number of cells for the phandle ? It should be aligned with other consumer/provider bindings. Neil > + > +Required properties: > +- compatible : contains the interconnect provider vendor specific compatible > + string > +- reg : register space of the interconnect controller hardware > + > +Examples: > + > + snoc: snoc@580000 { > + compatible = "qcom,msm8916-snoc"; > + reg = <0x580000 0x14000>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, <&rpmcc RPM_SMD_SNOC_A_CLK>; > + status = "okay"; > + }; > + bimc: bimc@400000 { > + compatible = "qcom,msm8916-bimc"; > + reg = <0x400000 0x62000>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, <&rpmcc RPM_SMD_BIMC_A_CLK>; > + status = "okay"; > + }; > + pnoc: pnoc@500000 { > + compatible = "qcom,msm8916-pnoc"; > + reg = <0x500000 0x11000>; > + clock-names = "bus_clk", "bus_a_clk"; > + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, <&rpmcc RPM_SMD_PCNOC_A_CLK>; > + status = "okay"; > + }; > + > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Neil, Apologies for the delayed response. On 12.04.18 г. 16:15, Neil Armstrong wrote: > On 09/03/2018 22:09, Georgi Djakov wrote: >> This binding is intended to represent the interconnect hardware present >> in some of the modern SoCs. Currently it consists only of a binding for >> the interconnect hardware devices (provider). >> >> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> >> --- >> .../bindings/interconnect/interconnect.txt | 47 ++++++++++++++++++++++ >> 1 file changed, 47 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/interconnect/interconnect.txt >> >> diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt >> new file mode 100644 >> index 000000000000..70612bb201e4 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt >> @@ -0,0 +1,47 @@ >> +Interconnect Provider Device Tree Bindings >> +========================================= >> + >> +The purpose of this document is to define a common set of generic interconnect >> +providers/consumers properties. >> + >> + >> += interconnect providers = >> + >> +The interconnect provider binding is intended to represent the interconnect >> +controllers in the system. Each provider registers a set of interconnect >> +nodes, which expose the interconnect related capabilities of the interconnect >> +to consumer drivers. These capabilities can be throughput, latency, priority >> +etc. The consumer drivers set constraints on interconnect path (or endpoints) >> +depending on the usecase. Interconnect providers can also be interconnect >> +consumers, such as in the case where two network-on-chip fabrics interface >> +directly > > Hi, > > Can't we specify the number of cells for the phandle ? It should be aligned with other consumer/provider bindings. Yes, that's the plan. Will align it! Thanks, Georgi -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt new file mode 100644 index 000000000000..70612bb201e4 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt @@ -0,0 +1,47 @@ +Interconnect Provider Device Tree Bindings +========================================= + +The purpose of this document is to define a common set of generic interconnect +providers/consumers properties. + + += interconnect providers = + +The interconnect provider binding is intended to represent the interconnect +controllers in the system. Each provider registers a set of interconnect +nodes, which expose the interconnect related capabilities of the interconnect +to consumer drivers. These capabilities can be throughput, latency, priority +etc. The consumer drivers set constraints on interconnect path (or endpoints) +depending on the usecase. Interconnect providers can also be interconnect +consumers, such as in the case where two network-on-chip fabrics interface +directly + +Required properties: +- compatible : contains the interconnect provider vendor specific compatible + string +- reg : register space of the interconnect controller hardware + +Examples: + + snoc: snoc@580000 { + compatible = "qcom,msm8916-snoc"; + reg = <0x580000 0x14000>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, <&rpmcc RPM_SMD_SNOC_A_CLK>; + status = "okay"; + }; + bimc: bimc@400000 { + compatible = "qcom,msm8916-bimc"; + reg = <0x400000 0x62000>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, <&rpmcc RPM_SMD_BIMC_A_CLK>; + status = "okay"; + }; + pnoc: pnoc@500000 { + compatible = "qcom,msm8916-pnoc"; + reg = <0x500000 0x11000>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, <&rpmcc RPM_SMD_PCNOC_A_CLK>; + status = "okay"; + }; +
This binding is intended to represent the interconnect hardware present in some of the modern SoCs. Currently it consists only of a binding for the interconnect hardware devices (provider). Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> --- .../bindings/interconnect/interconnect.txt | 47 ++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/interconnect/interconnect.txt -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html