diff mbox

[v3,1/7] dt-bindings: reset: Add AOSS reset bindings for SDM845 SoCs

Message ID 1521019283-32212-2-git-send-email-sibis@codeaurora.org (mailing list archive)
State Changes Requested
Delegated to: Andy Gross
Headers show

Commit Message

Sibi Sankar March 14, 2018, 9:21 a.m. UTC
Add SDM845 AOSS (always on subsystem) reset controller binding

Signed-off-by: Sibi S <sibis@codeaurora.org>
---
 .../devicetree/bindings/reset/qcom,aoss-reset.txt  | 54 ++++++++++++++++++++++
 include/dt-bindings/reset/qcom,sdm845-aoss.h       | 17 +++++++
 2 files changed, 71 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
 create mode 100644 include/dt-bindings/reset/qcom,sdm845-aoss.h

Comments

Rob Herring March 18, 2018, 12:49 p.m. UTC | #1
On Wed, Mar 14, 2018 at 02:51:17PM +0530, Sibi S wrote:
> Add SDM845 AOSS (always on subsystem) reset controller binding
> 
> Signed-off-by: Sibi S <sibis@codeaurora.org>

Still need a full name.

Otherwise, looks fine.

> ---
>  .../devicetree/bindings/reset/qcom,aoss-reset.txt  | 54 ++++++++++++++++++++++
>  include/dt-bindings/reset/qcom,sdm845-aoss.h       | 17 +++++++
>  2 files changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
>  create mode 100644 include/dt-bindings/reset/qcom,sdm845-aoss.h
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bjorn Andersson March 18, 2018, 10:44 p.m. UTC | #2
On Wed 14 Mar 02:21 PDT 2018, Sibi S wrote:
> +- reg:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: must specify the base address and size of the register
> +	            space.
> +
> +

Double empty lines.

> +- #reset-cells:
> +	Usage: required
> +	Value type: <uint>
> +	Definition: must be 1; cell entry represents the reset index.
> +
> +example:

Please capitalize the initial char.

> +
> +aoss_reset: qcom,reset-controller@b2e0100 {
> +	compatible = "qcom,sdm845-aoss-reset";
> +	reg = <0xc2b0000 0x20004>;

0x20004 does seem very even, please verify this size.

> +	#reset-cells = <1>;
> +};
> +
> +
> +Specifying reset lines connected to IP modules

"AOSS reset clients"

Although you could probably get a way with just referring to reset.txt
and the header file.

> +==============================================
> +
> +Device nodes that need access to reset lines should
> +specify them as a reset phandle in their corresponding node as
> +specified in reset.txt.
> +
> +For list of all valid reset indicies see
> +<dt-bindings/reset/qcom,sdm845-aoss.h>
> +
> +Example:
> +
> +modem-pil@4080000 {
> +	...
> +
> +	resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
> +	reset-names = "mss_restart";
> +
> +	...
> +};
> diff --git a/include/dt-bindings/reset/qcom,sdm845-aoss.h b/include/dt-bindings/reset/qcom,sdm845-aoss.h
> new file mode 100644
> index 0000000..e9b38fc
> --- /dev/null
> +++ b/include/dt-bindings/reset/qcom,sdm845-aoss.h
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0

For tooling reasons header files should have their SPDX License tag
wrapped in /* */

> +/*
> + * Copyright (C) 2018 The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_RESET_AOSS_SDM_845_H
> +#define _DT_BINDINGS_RESET_AOSS_SDM_845_H
> +
> +#define AOSS_CC_MSS_RESTART	0
> +#define AOSS_CC_CAMSS_RESTART	1
> +#define AOSS_CC_VENUS_RESTART	2
> +#define AOSS_CC_GPU_RESTART	3
> +#define AOSS_CC_DISPSS_RESTART	4
> +#define AOSS_CC_WCSS_RESTART	5
> +#define AOSS_CC_LPASS_RESTART	6
> +
> +#endif

Apart from these nits this looks reasonable.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sibi Sankar March 21, 2018, 6:29 a.m. UTC | #3
Hi Bjorn,
Thanks for the review.

On 03/19/2018 04:14 AM, Bjorn Andersson wrote:
> On Wed 14 Mar 02:21 PDT 2018, Sibi S wrote:
>> +- reg:
>> +	Usage: required
>> +	Value type: <prop-encoded-array>
>> +	Definition: must specify the base address and size of the register
>> +	            space.
>> +
>> +
> 
> Double empty lines.
> 

will remove them

>> +- #reset-cells:
>> +	Usage: required
>> +	Value type: <uint>
>> +	Definition: must be 1; cell entry represents the reset index.
>> +
>> +example:
> 
> Please capitalize the initial char.
>

sure

>> +
>> +aoss_reset: qcom,reset-controller@b2e0100 {
>> +	compatible = "qcom,sdm845-aoss-reset";
>> +	reg = <0xc2b0000 0x20004>;
> 
> 0x20004 does seem very even, please verify this size.
> 

even though the reg space after that range is unused, the AOSS reset
driver is supposed to control only those listed reset lines

>> +	#reset-cells = <1>;
>> +};
>> +
>> +
>> +Specifying reset lines connected to IP modules
> 
> "AOSS reset clients"
> 

yep this heading makes much more sense

> Although you could probably get a way with just referring to reset.txt
> and the header file.
> 
>> +==============================================
>> +
>> +Device nodes that need access to reset lines should
>> +specify them as a reset phandle in their corresponding node as
>> +specified in reset.txt.
>> +
>> +For list of all valid reset indicies see
>> +<dt-bindings/reset/qcom,sdm845-aoss.h>
>> +
>> +Example:
>> +
>> +modem-pil@4080000 {
>> +	...
>> +
>> +	resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
>> +	reset-names = "mss_restart";
>> +
>> +	...
>> +};
>> diff --git a/include/dt-bindings/reset/qcom,sdm845-aoss.h b/include/dt-bindings/reset/qcom,sdm845-aoss.h
>> new file mode 100644
>> index 0000000..e9b38fc
>> --- /dev/null
>> +++ b/include/dt-bindings/reset/qcom,sdm845-aoss.h
>> @@ -0,0 +1,17 @@
>> +// SPDX-License-Identifier: GPL-2.0
> 
> For tooling reasons header files should have their SPDX License tag
> wrapped in /* */
> 

Sure will replace it

>> +/*
>> + * Copyright (C) 2018 The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_RESET_AOSS_SDM_845_H
>> +#define _DT_BINDINGS_RESET_AOSS_SDM_845_H
>> +
>> +#define AOSS_CC_MSS_RESTART	0
>> +#define AOSS_CC_CAMSS_RESTART	1
>> +#define AOSS_CC_VENUS_RESTART	2
>> +#define AOSS_CC_GPU_RESTART	3
>> +#define AOSS_CC_DISPSS_RESTART	4
>> +#define AOSS_CC_WCSS_RESTART	5
>> +#define AOSS_CC_LPASS_RESTART	6
>> +
>> +#endif
> 
> Apart from these nits this looks reasonable.
> 
> Regards,
> Bjorn
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
new file mode 100644
index 0000000..04dca76
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
@@ -0,0 +1,54 @@ 
+Qualcomm AOSS Reset Controller
+======================================
+
+This binding describes a reset-controller found on AOSS (always on subsystem)
+for Qualcomm SDM845 SoCs.
+
+Required properties:
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be:
+		    "qcom,sdm845-aoss-reset"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must specify the base address and size of the register
+	            space.
+
+
+- #reset-cells:
+	Usage: required
+	Value type: <uint>
+	Definition: must be 1; cell entry represents the reset index.
+
+example:
+
+aoss_reset: qcom,reset-controller@b2e0100 {
+	compatible = "qcom,sdm845-aoss-reset";
+	reg = <0xc2b0000 0x20004>;
+	#reset-cells = <1>;
+};
+
+
+Specifying reset lines connected to IP modules
+==============================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For list of all valid reset indicies see
+<dt-bindings/reset/qcom,sdm845-aoss.h>
+
+Example:
+
+modem-pil@4080000 {
+	...
+
+	resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
+	reset-names = "mss_restart";
+
+	...
+};
diff --git a/include/dt-bindings/reset/qcom,sdm845-aoss.h b/include/dt-bindings/reset/qcom,sdm845-aoss.h
new file mode 100644
index 0000000..e9b38fc
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,sdm845-aoss.h
@@ -0,0 +1,17 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_RESET_AOSS_SDM_845_H
+#define _DT_BINDINGS_RESET_AOSS_SDM_845_H
+
+#define AOSS_CC_MSS_RESTART	0
+#define AOSS_CC_CAMSS_RESTART	1
+#define AOSS_CC_VENUS_RESTART	2
+#define AOSS_CC_GPU_RESTART	3
+#define AOSS_CC_DISPSS_RESTART	4
+#define AOSS_CC_WCSS_RESTART	5
+#define AOSS_CC_LPASS_RESTART	6
+
+#endif