| Message ID | 20180315153730.3798004-1-arnd@arndb.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thursday, March 15, 2018 8:37 AM, Arnd Bergmann [mailto:arnd@arndb.de] wrote: > > The *.dtb and *.dtb.S files get removed by 'make' during the build > process, > and later seem to be missed during the 'modpost' stage: > > rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb > drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb > drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S > drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S > drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S > drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb > drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb > drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb > drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S > drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S > WARNING: could not open > drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or > directory > > As a workaround, this adds all those files to the 'extra-y' target list, > but that's really ugly. Any ideas for a better fix? Does this work for you (untested, but the way it is done in drivers/of/unittest-data/Makefile): .PRECIOUS: \ $(obj)/%.dtb.S \ $(obj)/%.dtb -Frank > > Fixes: 81c0e3dd8292 ("drm: rcar-du: Fix legacy DT to create LVDS encoder > nodes") > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > --- > drivers/gpu/drm/rcar-du/Makefile | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/drivers/gpu/drm/rcar-du/Makefile > b/drivers/gpu/drm/rcar-du/Makefile > index 3e58ed93d5b1..e5fc6ec0b8cc 100644 > --- a/drivers/gpu/drm/rcar-du/Makefile > +++ b/drivers/gpu/drm/rcar-du/Makefile > @@ -12,6 +12,21 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS) += rcar_du_of.o \ > rcar_du_of_lvds_r8a7793.dtb.o > \ > rcar_du_of_lvds_r8a7795.dtb.o > \ > rcar_du_of_lvds_r8a7796.dtb.o > + > +extra-y += > rcar_du_of_lvds_r8a7790.dtb \ > + rcar_du_of_lvds_r8a7790.dtb \ > + rcar_du_of_lvds_r8a7791.dtb \ > + rcar_du_of_lvds_r8a7793.dtb \ > + rcar_du_of_lvds_r8a7795.dtb \ > + rcar_du_of_lvds_r8a7796.dtb > + > +extra-y += > rcar_du_of_lvds_r8a7790.dtb.S \ > + rcar_du_of_lvds_r8a7790.dtb.S > \ > + rcar_du_of_lvds_r8a7791.dtb.S > \ > + rcar_du_of_lvds_r8a7793.dtb.S > \ > + rcar_du_of_lvds_r8a7795.dtb.S > \ > + rcar_du_of_lvds_r8a7796.dtb.S > + > rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o > > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o > -- > 2.9.0
On Fri, Mar 16, 2018 at 2:39 AM, <Frank.Rowand@sony.com> wrote: > On Thursday, March 15, 2018 8:37 AM, Arnd Bergmann [mailto:arnd@arndb.de] wrote: >> >> The *.dtb and *.dtb.S files get removed by 'make' during the build >> process, >> and later seem to be missed during the 'modpost' stage: >> >> rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S >> WARNING: could not open >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or >> directory >> >> As a workaround, this adds all those files to the 'extra-y' target list, >> but that's really ugly. Any ideas for a better fix? > > Does this work for you (untested, but the way it is done in > drivers/of/unittest-data/Makefile): > > .PRECIOUS: \ > $(obj)/%.dtb.S \ > $(obj)/%.dtb Yes, that works and looks much better than my version. Arnd
Hi Arnd, On Friday, 16 March 2018 10:25:25 EET Arnd Bergmann wrote: > On Fri, Mar 16, 2018 at 2:39 AM, <Frank.Rowand@sony.com> wrote: > > On Thursday, March 15, 2018 8:37 AM, Arnd Bergmann wrote: > >> The *.dtb and *.dtb.S files get removed by 'make' during the build > >> process, > >> and later seem to be missed during the 'modpost' stage: > >> > >> rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S > >> WARNING: could not open > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or > >> directory > >> > >> As a workaround, this adds all those files to the 'extra-y' target list, > >> but that's really ugly. Any ideas for a better fix? > > > > Does this work for you (untested, but the way it is done in > > drivers/of/unittest-data/Makefile): > > > > .PRECIOUS: \ > > > > $(obj)/%.dtb.S \ > > $(obj)/%.dtb > > Yes, that works and looks much better than my version. Thank you for your patch, and sorry for breaking the build. Do you plan to submit a new version based on Frank's approach ?
On Tue, Mar 20, 2018 at 9:15 PM, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > Hi Arnd, > > On Friday, 16 March 2018 10:25:25 EET Arnd Bergmann wrote: >> On Fri, Mar 16, 2018 at 2:39 AM, <Frank.Rowand@sony.com> wrote: >> > On Thursday, March 15, 2018 8:37 AM, Arnd Bergmann wrote: >> >> The *.dtb and *.dtb.S files get removed by 'make' during the build >> >> process, >> >> and later seem to be missed during the 'modpost' stage: >> >> >> >> rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S >> >> WARNING: could not open >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or >> >> directory >> >> >> >> As a workaround, this adds all those files to the 'extra-y' target list, >> >> but that's really ugly. Any ideas for a better fix? >> > >> > Does this work for you (untested, but the way it is done in >> > drivers/of/unittest-data/Makefile): >> > >> > .PRECIOUS: \ >> > >> > $(obj)/%.dtb.S \ >> > $(obj)/%.dtb >> >> Yes, that works and looks much better than my version. > > Thank you for your patch, and sorry for breaking the build. Do you plan to > submit a new version based on Frank's approach ? I'm currently at Linaro Connect and won't be able to send a tested patch before mid next week. If you want it earlier, feel free to apply that patch with my original description and 'Reported-by: Arnd Bergmann <arnd@arndb.de>'. Arnd
Hi Arnd, On Wednesday, 21 March 2018 09:38:35 EET Arnd Bergmann wrote: > On Tue, Mar 20, 2018 at 9:15 PM, Laurent Pinchart wrote: > > On Friday, 16 March 2018 10:25:25 EET Arnd Bergmann wrote: > >> On Fri, Mar 16, 2018 at 2:39 AM, <Frank.Rowand@sony.com> wrote: > >>> On Thursday, March 15, 2018 8:37 AM, Arnd Bergmann wrote: > >>>> The *.dtb and *.dtb.S files get removed by 'make' during the build > >>>> process, and later seem to be missed during the 'modpost' stage: > >>>> > >>>> rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb > >>>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb > >>>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S > >>>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S > >>>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S > >>>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb > >>>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb > >>>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb > >>>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S > >>>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S > >>>> WARNING: could not open > >>>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or > >>>> directory > >>>> > >>>> As a workaround, this adds all those files to the 'extra-y' target > >>>> list, but that's really ugly. Any ideas for a better fix? > >>> > >>> Does this work for you (untested, but the way it is done in > >>> drivers/of/unittest-data/Makefile): > >>> > >>> .PRECIOUS: \ > >>> $(obj)/%.dtb.S \ > >>> $(obj)/%.dtb > >> > >> Yes, that works and looks much better than my version. > > > > Thank you for your patch, and sorry for breaking the build. Do you plan to > > submit a new version based on Frank's approach ? > > I'm currently at Linaro Connect and won't be able to send a tested patch > before mid next week. If you want it earlier, feel free to apply that patch > with my original description and 'Reported-by: Arnd Bergmann > <arnd@arndb.de>'. I was about to do so, but realized I can't reproduce the problem here. If you don't mind I'll let you submit a v2. Alternatively I can work on it if you give me instruction to reproduce the issue.
Hi Frank, On Fri, Mar 16, 2018 at 2:39 AM, <Frank.Rowand@sony.com> wrote: > On Thursday, March 15, 2018 8:37 AM, Arnd Bergmann [mailto:arnd@arndb.de] wrote: >> >> The *.dtb and *.dtb.S files get removed by 'make' during the build >> process, >> and later seem to be missed during the 'modpost' stage: >> >> rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S >> WARNING: could not open >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or >> directory >> >> As a workaround, this adds all those files to the 'extra-y' target list, >> but that's really ugly. Any ideas for a better fix? > > Does this work for you (untested, but the way it is done in > drivers/of/unittest-data/Makefile): > > .PRECIOUS: \ > $(obj)/%.dtb.S \ > $(obj)/%.dtb Shouldn't that just be moved to scripts/Makefile.lib, just above the rule to make dtb.S, like is done for other precious objects? Gr{oetje,eeting}s, Geert
Hi Geert, On Thursday, 22 March 2018 16:26:22 EET Geert Uytterhoeven wrote: > On Fri, Mar 16, 2018 at 2:39 AM, <Frank.Rowand@sony.com> wrote: > > On Thursday, March 15, 2018 8:37 AM, Arnd Bergmann wrote: > >> The *.dtb and *.dtb.S files get removed by 'make' during the build > >> process, and later seem to be missed during the 'modpost' stage: > >> > >> rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S > >> WARNING: could not open > >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or > >> directory > >> > >> As a workaround, this adds all those files to the 'extra-y' target list, > >> but that's really ugly. Any ideas for a better fix? > > > > Does this work for you (untested, but the way it is done in > > drivers/of/unittest-data/Makefile): > > > > .PRECIOUS: \ > > > > $(obj)/%.dtb.S \ > > $(obj)/%.dtb > > Shouldn't that just be moved to scripts/Makefile.lib, just above the rule > to make dtb.S, like is done for other precious objects? Without any implied acknowledgment that keeping those intermediate files is the right solution (I don't claim to master the kernel build system), I think such a rule would indeed be better in a core Makefile, as the rules to build the .dtb.o file comes from the core too. Could another option be to create a rule to compile a .dtb.o from the .dts file directly without going through intermediate files that will be removed automatically ?
Hi Laurent, CC Yamada-san On Thu, Mar 22, 2018 at 3:50 PM, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > On Thursday, 22 March 2018 16:26:22 EET Geert Uytterhoeven wrote: >> On Fri, Mar 16, 2018 at 2:39 AM, <Frank.Rowand@sony.com> wrote: >> > On Thursday, March 15, 2018 8:37 AM, Arnd Bergmann wrote: >> >> The *.dtb and *.dtb.S files get removed by 'make' during the build >> >> process, and later seem to be missed during the 'modpost' stage: >> >> >> >> rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S >> >> WARNING: could not open >> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or >> >> directory >> >> >> >> As a workaround, this adds all those files to the 'extra-y' target list, >> >> but that's really ugly. Any ideas for a better fix? >> > >> > Does this work for you (untested, but the way it is done in >> > drivers/of/unittest-data/Makefile): >> > >> > .PRECIOUS: \ >> > >> > $(obj)/%.dtb.S \ >> > $(obj)/%.dtb >> >> Shouldn't that just be moved to scripts/Makefile.lib, just above the rule >> to make dtb.S, like is done for other precious objects? > > Without any implied acknowledgment that keeping those intermediate files is > the right solution (I don't claim to master the kernel build system), I think Me neither, but I think it is. Cfr. .y => .tab.c => .tab.o with .tab.c marked PRECIOUS. > such a rule would indeed be better in a core Makefile, as the rules to build > the .dtb.o file comes from the core too. Could another option be to create a > rule to compile a .dtb.o from the .dts file directly without going through > intermediate files that will be removed automatically ? Such a rules needs to execute two commands, which is more tricky, considering error handling. It's easier (to get right) to have two separate rules, and let make chain them automatically. Gr{oetje,eeting}s, Geert
2018-03-23 0:13 GMT+09:00 Geert Uytterhoeven <geert@linux-m68k.org>: > Hi Laurent, > > CC Yamada-san > > On Thu, Mar 22, 2018 at 3:50 PM, Laurent Pinchart > <laurent.pinchart@ideasonboard.com> wrote: >> On Thursday, 22 March 2018 16:26:22 EET Geert Uytterhoeven wrote: >>> On Fri, Mar 16, 2018 at 2:39 AM, <Frank.Rowand@sony.com> wrote: >>> > On Thursday, March 15, 2018 8:37 AM, Arnd Bergmann wrote: >>> >> The *.dtb and *.dtb.S files get removed by 'make' during the build >>> >> process, and later seem to be missed during the 'modpost' stage: >>> >> >>> >> rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S >>> >> WARNING: could not open >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or >>> >> directory >>> >> >>> >> As a workaround, this adds all those files to the 'extra-y' target list, >>> >> but that's really ugly. Any ideas for a better fix? >>> > >>> > Does this work for you (untested, but the way it is done in >>> > drivers/of/unittest-data/Makefile): >>> > >>> > .PRECIOUS: \ >>> > >>> > $(obj)/%.dtb.S \ >>> > $(obj)/%.dtb >>> >>> Shouldn't that just be moved to scripts/Makefile.lib, just above the rule >>> to make dtb.S, like is done for other precious objects? >> >> Without any implied acknowledgment that keeping those intermediate files is >> the right solution (I don't claim to master the kernel build system), I think > > Me neither, but I think it is. > > Cfr. .y => .tab.c => .tab.o with .tab.c marked PRECIOUS. > >> such a rule would indeed be better in a core Makefile, as the rules to build >> the .dtb.o file comes from the core too. Could another option be to create a >> rule to compile a .dtb.o from the .dts file directly without going through >> intermediate files that will be removed automatically ? > > Such a rules needs to execute two commands, which is more tricky, considering > error handling. > It's easier (to get right) to have two separate rules, and let make chain them > automatically. > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds This has been in my TODO list for a while, but I have not had time to finish it. Some people use .PRECIOUS to suppress file removal, but it is wrong IMO. .SECONDARY is the right one, but one problem is, this does not work with pattern rules. I will send a patch soon for the core improvement.
2018-03-23 0:13 GMT+09:00 Geert Uytterhoeven <geert@linux-m68k.org>: > Hi Laurent, > > CC Yamada-san > > On Thu, Mar 22, 2018 at 3:50 PM, Laurent Pinchart > <laurent.pinchart@ideasonboard.com> wrote: >> On Thursday, 22 March 2018 16:26:22 EET Geert Uytterhoeven wrote: >>> On Fri, Mar 16, 2018 at 2:39 AM, <Frank.Rowand@sony.com> wrote: >>> > On Thursday, March 15, 2018 8:37 AM, Arnd Bergmann wrote: >>> >> The *.dtb and *.dtb.S files get removed by 'make' during the build >>> >> process, and later seem to be missed during the 'modpost' stage: >>> >> >>> >> rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S >>> >> WARNING: could not open >>> >> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or >>> >> directory >>> >> >>> >> As a workaround, this adds all those files to the 'extra-y' target list, >>> >> but that's really ugly. Any ideas for a better fix? >>> > >>> > Does this work for you (untested, but the way it is done in >>> > drivers/of/unittest-data/Makefile): >>> > >>> > .PRECIOUS: \ >>> > >>> > $(obj)/%.dtb.S \ >>> > $(obj)/%.dtb >>> >>> Shouldn't that just be moved to scripts/Makefile.lib, just above the rule >>> to make dtb.S, like is done for other precious objects? >> >> Without any implied acknowledgment that keeping those intermediate files is >> the right solution (I don't claim to master the kernel build system), I think > > Me neither, but I think it is. > > Cfr. .y => .tab.c => .tab.o with .tab.c marked PRECIOUS. > >> such a rule would indeed be better in a core Makefile, as the rules to build >> the .dtb.o file comes from the core too. Could another option be to create a >> rule to compile a .dtb.o from the .dts file directly without going through >> intermediate files that will be removed automatically ? > > Such a rules needs to execute two commands, which is more tricky, considering > error handling. > It's easier (to get right) to have two separate rules, and let make chain them > automatically. > > Gr{oetje,eeting}s, > > Geert > I submit the patches. I'd like to queue them up for the next merge window, so your problems will be fixed if Kbuild pull requests are pulled. The driver Makefile has two problems. [1] Objects are always rebuilt due to missing 'targets' [2] Intermediate files are removed due to missing .SECONDARY (or .PRECIOUS) If you want to fix them by yourself, you can. But, those issues will be taken care of by the core Makefile. Specifically, [1] will be fixed by https://patchwork.kernel.org/patch/10304671/ and [2] by https://patchwork.kernel.org/patch/10304651/
Hi Geert, On 03/22/18 07:26, Geert Uytterhoeven wrote: > Hi Frank, > > On Fri, Mar 16, 2018 at 2:39 AM, <Frank.Rowand@sony.com> wrote: >> On Thursday, March 15, 2018 8:37 AM, Arnd Bergmann [mailto:arnd@arndb.de] wrote: >>> >>> The *.dtb and *.dtb.S files get removed by 'make' during the build >>> process, >>> and later seem to be missed during the 'modpost' stage: >>> >>> rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb >>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb >>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S >>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S >>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S >>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb >>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb >>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb >>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S >>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S >>> WARNING: could not open >>> drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or >>> directory >>> >>> As a workaround, this adds all those files to the 'extra-y' target list, >>> but that's really ugly. Any ideas for a better fix? >> >> Does this work for you (untested, but the way it is done in >> drivers/of/unittest-data/Makefile): >> >> .PRECIOUS: \ >> $(obj)/%.dtb.S \ >> $(obj)/%.dtb > > Shouldn't that just be moved to scripts/Makefile.lib, just above the rule > to make dtb.S, like is done for other precious objects? > > Gr{oetje,eeting}s, > > Geert > Thank you for adding Yamada-san (later in this thread). I acked his patch series that does what you suggest. -Frank
diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile index 3e58ed93d5b1..e5fc6ec0b8cc 100644 --- a/drivers/gpu/drm/rcar-du/Makefile +++ b/drivers/gpu/drm/rcar-du/Makefile @@ -12,6 +12,21 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS) += rcar_du_of.o \ rcar_du_of_lvds_r8a7793.dtb.o \ rcar_du_of_lvds_r8a7795.dtb.o \ rcar_du_of_lvds_r8a7796.dtb.o + +extra-y += rcar_du_of_lvds_r8a7790.dtb \ + rcar_du_of_lvds_r8a7790.dtb \ + rcar_du_of_lvds_r8a7791.dtb \ + rcar_du_of_lvds_r8a7793.dtb \ + rcar_du_of_lvds_r8a7795.dtb \ + rcar_du_of_lvds_r8a7796.dtb + +extra-y += rcar_du_of_lvds_r8a7790.dtb.S \ + rcar_du_of_lvds_r8a7790.dtb.S \ + rcar_du_of_lvds_r8a7791.dtb.S \ + rcar_du_of_lvds_r8a7793.dtb.S \ + rcar_du_of_lvds_r8a7795.dtb.S \ + rcar_du_of_lvds_r8a7796.dtb.S + rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o
The *.dtb and *.dtb.S files get removed by 'make' during the build process, and later seem to be missed during the 'modpost' stage: rm drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7791.dtb.S drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7795.dtb.S drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7796.dtb.S drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7793.dtb.S WARNING: could not open drivers/gpu/drm/rcar-du/rcar_du_of_lvds_r8a7790.dtb.S: No such file or directory As a workaround, this adds all those files to the 'extra-y' target list, but that's really ugly. Any ideas for a better fix? Fixes: 81c0e3dd8292 ("drm: rcar-du: Fix legacy DT to create LVDS encoder nodes") Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- drivers/gpu/drm/rcar-du/Makefile | 15 +++++++++++++++ 1 file changed, 15 insertions(+)