diff mbox

[v8,09/14] dt-bindings: iommu/rockchip: Add clock property

Message ID 20180323073814.5802-10-jeffy.chen@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jeffy Chen March 23, 2018, 7:38 a.m. UTC
Add clock property, since we are going to control clocks in rockchip
iommu driver.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
---

Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 Documentation/devicetree/bindings/iommu/rockchip,iommu.txt | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Rob Herring (Arm) March 25, 2018, 11:52 p.m. UTC | #1
On Fri, Mar 23, 2018 at 03:38:09PM +0800, Jeffy Chen wrote:
> Add clock property, since we are going to control clocks in rockchip
> iommu driver.
> 
> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
> ---

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
index 2098f7732264..6ecefea1c6f9 100644
--- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
@@ -14,6 +14,11 @@  Required properties:
                     "single-master" device, and needs no additional information
                     to associate with its master device.  See:
                     Documentation/devicetree/bindings/iommu/iommu.txt
+- clocks          : A list of clocks required for the IOMMU to be accessible by
+                    the host CPU.
+- clock-names     : Should contain the following:
+	"iface" - Main peripheral bus clock (PCLK/HCL) (required)
+	"aclk"  - AXI bus clock (required)
 
 Optional properties:
 - rockchip,disable-mmu-reset : Don't use the mmu reset operation.
@@ -27,5 +32,7 @@  Example:
 		reg = <0xff940300 0x100>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "vopl_mmu";
+		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
 	};