diff mbox

[v4,13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu

Message ID 1522358807-10413-14-git-send-email-ilialin@codeaurora.org (mailing list archive)
State Changes Requested
Delegated to: Andy Gross
Headers show

Commit Message

Ilia Lin March 29, 2018, 9:26 p.m. UTC
In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
that have KRYO processors, the CPU ferequencies subset and voltage value
of each OPP varies based on the silicon variant in use.
Qualcomm Technologies, Inc. Process Voltage Scaling Tables
defines the voltage and frequency value based on the msm-id in SMEM
and speedbin blown in the efuse combination.
The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information.
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.

This change adds documentation.

Change-Id: I1953f652a48249fb516d175f0e965a9510cd4209
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
---
 .../devicetree/bindings/cpufreq/kryo-cpufreq.txt   | 693 +++++++++++++++++++++
 1 file changed, 693 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt

Comments

Viresh Kumar April 2, 2018, 9:30 a.m. UTC | #1
+Sricharan,

On 30-03-18, 00:26, Ilia Lin wrote:
> In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
> that have KRYO processors, the CPU ferequencies subset and voltage value
> of each OPP varies based on the silicon variant in use.
> Qualcomm Technologies, Inc. Process Voltage Scaling Tables
> defines the voltage and frequency value based on the msm-id in SMEM
> and speedbin blown in the efuse combination.
> The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
> to provide the OPP framework with required information.
> This is used to determine the voltage and frequency value for each OPP of
> operating-points-v2 table when it is parsed by the OPP framework.
> 
> This change adds documentation.
> 
> Change-Id: I1953f652a48249fb516d175f0e965a9510cd4209
> Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
> ---
>  .../devicetree/bindings/cpufreq/kryo-cpufreq.txt   | 693 +++++++++++++++++++++
>  1 file changed, 693 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
> 
> diff --git a/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt

This should really go in opp directory.

> new file mode 100644
> index 0000000..20cef9d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
> @@ -0,0 +1,693 @@
> +Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
> +===================================
> +
> +In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
> +that have KRYO processors, the CPU ferequencies subset and voltage value
> +of each OPP varies based on the silicon variant in use.
> +Qualcomm Technologies, Inc. Process Voltage Scaling Tables
> +defines the voltage and frequency value based on the msm-id in SMEM
> +and speedbin blown in the efuse combination.
> +The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
> +to provide the OPP framework with required information (existing HW bitmap).
> +This is used to determine the voltage and frequency value for each OPP of
> +operating-points-v2 table when it is parsed by the OPP framework.
> +
> +Required properties:
> +--------------------
> +In 'cpus' nodes:
> +- operating-points-v2: Phandle to the operating-points-v2 table to use.
> +
> +In 'operating-points-v2' table:
> +- compatible: Should be
> +	- 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
> +- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
> +		efuse registers that has information about the
> +		speedbin that is used to select the right frequency/voltage
> +		value pair.
> +		Please refer the for nvmem-cells
> +		bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
> +		and also examples below.

Sricharan is also working on adding these, just make sure you guys do the same
thing..
Sricharan Ramabadhran April 2, 2018, 3:07 p.m. UTC | #2
Hi Viresh,

On 4/2/2018 3:00 PM, Viresh Kumar wrote:
> +Sricharan,
> 
> On 30-03-18, 00:26, Ilia Lin wrote:
>> In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
>> that have KRYO processors, the CPU ferequencies subset and voltage value
>> of each OPP varies based on the silicon variant in use.
>> Qualcomm Technologies, Inc. Process Voltage Scaling Tables
>> defines the voltage and frequency value based on the msm-id in SMEM
>> and speedbin blown in the efuse combination.
>> The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
>> to provide the OPP framework with required information.
>> This is used to determine the voltage and frequency value for each OPP of
>> operating-points-v2 table when it is parsed by the OPP framework.
>>
>> This change adds documentation.
>>
>> Change-Id: I1953f652a48249fb516d175f0e965a9510cd4209
>> Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
>> ---
>>  .../devicetree/bindings/cpufreq/kryo-cpufreq.txt   | 693 +++++++++++++++++++++
>>  1 file changed, 693 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
>>
>> diff --git a/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
> 
> This should really go in opp directory.
> 
>> new file mode 100644
>> index 0000000..20cef9d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
>> @@ -0,0 +1,693 @@
>> +Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
>> +===================================
>> +
>> +In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
>> +that have KRYO processors, the CPU ferequencies subset and voltage value
>> +of each OPP varies based on the silicon variant in use.
>> +Qualcomm Technologies, Inc. Process Voltage Scaling Tables
>> +defines the voltage and frequency value based on the msm-id in SMEM
>> +and speedbin blown in the efuse combination.
>> +The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
>> +to provide the OPP framework with required information (existing HW bitmap).
>> +This is used to determine the voltage and frequency value for each OPP of
>> +operating-points-v2 table when it is parsed by the OPP framework.
>> +
>> +Required properties:
>> +--------------------
>> +In 'cpus' nodes:
>> +- operating-points-v2: Phandle to the operating-points-v2 table to use.
>> +
>> +In 'operating-points-v2' table:
>> +- compatible: Should be
>> +	- 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
>> +- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
>> +		efuse registers that has information about the
>> +		speedbin that is used to select the right frequency/voltage
>> +		value pair.
>> +		Please refer the for nvmem-cells
>> +		bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
>> +		and also examples below.
> 
> Sricharan is also working on adding these, just make sure you guys do the same
> thing..
> 

 Right, i was adding a similar one for krait cores [1]. There is code common in the
 init sequence across both (little). Do you intent to make them common ?

Regards,
 Sricharan

 [1] https://patchwork.kernel.org/patch/10261873/
Sricharan Ramabadhran April 3, 2018, 2:41 a.m. UTC | #3
Hi Viresh,

On 4/2/2018 8:37 PM, Sricharan R wrote:
> Hi Viresh,
> 
> On 4/2/2018 3:00 PM, Viresh Kumar wrote:
>> +Sricharan,
>>
>> On 30-03-18, 00:26, Ilia Lin wrote:
>>> In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
>>> that have KRYO processors, the CPU ferequencies subset and voltage value
>>> of each OPP varies based on the silicon variant in use.
>>> Qualcomm Technologies, Inc. Process Voltage Scaling Tables
>>> defines the voltage and frequency value based on the msm-id in SMEM
>>> and speedbin blown in the efuse combination.
>>> The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
>>> to provide the OPP framework with required information.
>>> This is used to determine the voltage and frequency value for each OPP of
>>> operating-points-v2 table when it is parsed by the OPP framework.
>>>
>>> This change adds documentation.
>>>
>>> Change-Id: I1953f652a48249fb516d175f0e965a9510cd4209
>>> Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
>>> ---
>>>  .../devicetree/bindings/cpufreq/kryo-cpufreq.txt   | 693 +++++++++++++++++++++
>>>  1 file changed, 693 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
>>
>> This should really go in opp directory.
>>
>>> new file mode 100644
>>> index 0000000..20cef9d
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
>>> @@ -0,0 +1,693 @@
>>> +Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
>>> +===================================
>>> +
>>> +In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
>>> +that have KRYO processors, the CPU ferequencies subset and voltage value
>>> +of each OPP varies based on the silicon variant in use.
>>> +Qualcomm Technologies, Inc. Process Voltage Scaling Tables
>>> +defines the voltage and frequency value based on the msm-id in SMEM
>>> +and speedbin blown in the efuse combination.
>>> +The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
>>> +to provide the OPP framework with required information (existing HW bitmap).
>>> +This is used to determine the voltage and frequency value for each OPP of
>>> +operating-points-v2 table when it is parsed by the OPP framework.
>>> +
>>> +Required properties:
>>> +--------------------
>>> +In 'cpus' nodes:
>>> +- operating-points-v2: Phandle to the operating-points-v2 table to use.
>>> +
>>> +In 'operating-points-v2' table:
>>> +- compatible: Should be
>>> +	- 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
>>> +- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
>>> +		efuse registers that has information about the
>>> +		speedbin that is used to select the right frequency/voltage
>>> +		value pair.
>>> +		Please refer the for nvmem-cells
>>> +		bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
>>> +		and also examples below.
>>
>> Sricharan is also working on adding these, just make sure you guys do the same
>> thing..
>>
 Right, i was adding a similar one for krait cores [1]. There is code common in the
 init sequence across both (little). Do you suggest to make them common ?

Regards,
 Sricharan

 [1] https://patchwork.kernel.org/patch/10261873/
Viresh Kumar April 3, 2018, 4:23 a.m. UTC | #4
On 03-04-18, 08:11, Sricharan R wrote:
>  Right, i was adding a similar one for krait cores [1]. There is code common in the
>  init sequence across both (little). Do you suggest to make them common ?

It may make sense as we are talking about one SoC family here :)
Sricharan Ramabadhran April 3, 2018, 4:39 p.m. UTC | #5
Hi Viresh,

On 4/3/2018 9:53 AM, Viresh Kumar wrote:
> On 03-04-18, 08:11, Sricharan R wrote:
>>  Right, i was adding a similar one for krait cores [1]. There is code common in the
>>  init sequence across both (little). Do you suggest to make them common ?
> 
> It may make sense as we are talking about one SoC family here :)
> 
  ok. So either of us can merge, depending upon which one goes first.

Regards,
 Sricharan
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
new file mode 100644
index 0000000..20cef9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
@@ -0,0 +1,693 @@ 
+Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
+===================================
+
+In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
+that have KRYO processors, the CPU ferequencies subset and voltage value
+of each OPP varies based on the silicon variant in use.
+Qualcomm Technologies, Inc. Process Voltage Scaling Tables
+defines the voltage and frequency value based on the msm-id in SMEM
+and speedbin blown in the efuse combination.
+The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
+to provide the OPP framework with required information (existing HW bitmap).
+This is used to determine the voltage and frequency value for each OPP of
+operating-points-v2 table when it is parsed by the OPP framework.
+
+Required properties:
+--------------------
+In 'cpus' nodes:
+- operating-points-v2: Phandle to the operating-points-v2 table to use.
+
+In 'operating-points-v2' table:
+- compatible: Should be
+	- 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
+- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
+		efuse registers that has information about the
+		speedbin that is used to select the right frequency/voltage
+		value pair.
+		Please refer the for nvmem-cells
+		bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
+		and also examples below.
+
+In every OPP node:
+- opp-supported-hw: A single 32 bit bitmap value, representing compatible HW.
+		    Bitmap:
+			0:	MSM8996 V3, speedbin 0
+			1:	MSM8996 V3, speedbin 1
+			2:	MSM8996 V3, speedbin 2
+			3:	unused
+			4:	MSM8996 SG, speedbin 0
+			5:	MSM8996 SG, speedbin 1
+			6:	MSM8996 SG, speedbin 2
+			7-31:	unused
+
+Example 1:
+---------
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster0_opp>;
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster0_opp>;
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster1_opp>;
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster1_opp>;
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU2>;
+				};
+
+				core1 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <  307200000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <  384000000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-422400000 {
+			opp-hz = /bits/ 64 <  422400000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <  460800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <  480000000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <  537600000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <  556800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <  614400000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <  652800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <  691200000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <  729600000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-768000000 {
+			opp-hz = /bits/ 64 <  768000000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <  844800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <  902400000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-960000000 {
+			opp-hz = /bits/ 64 <  960000000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <  979200000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 < 1036800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 < 1056000000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 < 1113600000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 < 1132800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 < 1190400000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 < 1209600000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1228800000 {
+			opp-hz = /bits/ 64 < 1228800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 < 1286400000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 < 1324800000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 < 1363200000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x72>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 < 1401600000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 < 1440000000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 < 1478400000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1497600000 {
+			opp-hz = /bits/ 64 < 1497600000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x4>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 < 1516800000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 < 1593600000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x71>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 < 1996800000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x20>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2188800000 {
+			opp-hz = /bits/ 64 < 2188800000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <  307200000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <  384000000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <  403200000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <  460800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <  480000000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <  537600000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <  556800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <  614400000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <  652800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <  691200000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <  729600000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-748800000 {
+			opp-hz = /bits/ 64 <  748800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <  806400000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-825600000 {
+			opp-hz = /bits/ 64 <  825600000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-883200000 {
+			opp-hz = /bits/ 64 <  883200000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <  902400000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <  940800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <  979200000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 < 1036800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 < 1056000000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 < 1113600000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 < 1132800000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 < 1190400000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 < 1209600000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 < 1248000000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 < 1286400000 >;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 < 1324800000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 < 1363200000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 < 1401600000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 < 1440000000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 < 1478400000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 < 1516800000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 < 1555200000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 < 1593600000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 < 1632000000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 < 1670400000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1708800000 {
+			opp-hz = /bits/ 64 < 1708800000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 < 1747200000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 < 1785600000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1804800000 {
+			opp-hz = /bits/ 64 < 1804800000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x6>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 < 1824000000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x71>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 < 1900800000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x74>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1920000000 {
+			opp-hz = /bits/ 64 < 1920000000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 < 1977600000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 < 1996800000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2054400000 {
+			opp-hz = /bits/ 64 < 2054400000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 < 2073600000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 < 2150400000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x31>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 < 2246400000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 < 2342400000 >;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+
+	};
+
+....
+
+reserved-memory {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+....
+	smem_mem: smem-mem@86000000 {
+		reg = <0x0 0x86000000 0x0 0x200000>;
+		no-map;
+	};
+....
+};
+
+smem {
+	compatible = "qcom,smem";
+	memory-region = <&smem_mem>;
+	hwlocks = <&tcsr_mutex 3>;
+};
+
+soc {
+....
+	qfprom: qfprom@74000 {
+		compatible = "qcom,qfprom";
+		reg = <0x00074000 0x8ff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		....
+		speedbin_efuse: speedbin@133 {
+			reg = <0x133 0x1>;
+			bits = <5 3>;
+		};
+	};
+};