diff mbox

crypto: caam: Drop leading zero from input buffer

Message ID 1523739000-27093-1-git-send-email-festevam@gmail.com (mailing list archive)
State Superseded
Delegated to: Herbert Xu
Headers show

Commit Message

Fabio Estevam April 14, 2018, 8:50 p.m. UTC
From: Fabio Estevam <fabio.estevam@nxp.com>

imx6ul and imx7 report the following error:

caam_jr 2142000.jr1: 40000789: DECO: desc idx 7:
Protocol Size Error - A protocol has seen an error in size. When
running RSA, pdb size N < (size of F) when no formatting is used; or
pdb size N < (F + 11) when formatting is used.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at crypto/asymmetric_keys/public_key.c:148
public_key_verify_signature+0x27c/0x2b0

This error happens because the signature contains 257 bytes, including
a leading zero as the first element.

Fix the problem by striping off the leading zero from input data
before feeding it to the CAAM accelerator.

Fixes: 8c419778ab57e497b5 ("crypto: caam - add support for RSA algorithm")
Cc: <stable@vger.kernel.org>
Reported-by: Martin Townsend <mtownsend1973@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 drivers/crypto/caam/caampkc.c | 43 +++++++++++++++++++++++++++++++++++--------
 1 file changed, 35 insertions(+), 8 deletions(-)

Comments

Martin Townsend April 15, 2018, 8:01 a.m. UTC | #1
Hi Fabio

On Sat, Apr 14, 2018 at 9:50 PM, Fabio Estevam <festevam@gmail.com> wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
>
> imx6ul and imx7 report the following error:
>
> caam_jr 2142000.jr1: 40000789: DECO: desc idx 7:
> Protocol Size Error - A protocol has seen an error in size. When
> running RSA, pdb size N < (size of F) when no formatting is used; or
> pdb size N < (F + 11) when formatting is used.
>
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at crypto/asymmetric_keys/public_key.c:148
> public_key_verify_signature+0x27c/0x2b0
>
> This error happens because the signature contains 257 bytes, including
> a leading zero as the first element.
>
> Fix the problem by striping off the leading zero from input data
> before feeding it to the CAAM accelerator.
>
> Fixes: 8c419778ab57e497b5 ("crypto: caam - add support for RSA algorithm")
> Cc: <stable@vger.kernel.org>
> Reported-by: Martin Townsend <mtownsend1973@gmail.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  drivers/crypto/caam/caampkc.c | 43 +++++++++++++++++++++++++++++++++++--------
>  1 file changed, 35 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
> index 7a897209..d2ad547 100644
> --- a/drivers/crypto/caam/caampkc.c
> +++ b/drivers/crypto/caam/caampkc.c
> @@ -166,6 +166,14 @@ static void rsa_priv_f3_done(struct device *dev, u32 *desc, u32 err,
>         akcipher_request_complete(req, err);
>  }
>
> +static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
> +{
> +       while (!**ptr && *nbytes) {
> +               (*ptr)++;
> +               (*nbytes)--;
> +       }
> +}
> +
>  static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
>                                          size_t desclen)
>  {
> @@ -178,7 +186,34 @@ static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
>         int sgc;
>         int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
>         int src_nents, dst_nents;
> +       const u8 *buffer;
> +       size_t len;
> +
> +       buffer = kzalloc(req->src_len, GFP_ATOMIC);
> +       if (!buffer)
> +               return ERR_PTR(-ENOMEM);
> +
> +       sg_copy_to_buffer(req->src, sg_nents(req->src),
> +                         (void *)buffer, req->src_len);
> +       len = req->src_len;
>
> +       /*
> +        * Check if the buffer contains leading zero and if
> +        * it does, drop the leading zero
> +        */
> +       if (buffer[0] == 0) {
> +               caam_rsa_drop_leading_zeros(&buffer, &len);
> +               if (!buffer) {

This would free NULL, I would revert back to using a temp pointer
instead of passing &buffer to caam_rsa_drop_leading_zeros.
> +                       kfree(buffer);
> +                       return ERR_PTR(-ENOMEM);
> +               }
> +

I would set req->src_len to len here and then we're covered if there
are more than 1 leading zero.
> +               req->src_len -= 1;
> +               sg_copy_from_buffer(req->src, sg_nents(req->src),
> +                                   (void *)buffer, req->src_len);
> +       }
> +

If we have a leading zero buffer will now point to a different memory
location than the one allocated, using temp as above should fix this.
> +       kfree(buffer);
>         src_nents = sg_nents_for_len(req->src, req->src_len);
>         dst_nents = sg_nents_for_len(req->dst, req->dst_len);
>
> @@ -683,14 +718,6 @@ static void caam_rsa_free_key(struct caam_rsa_key *key)
>         memset(key, 0, sizeof(*key));
>  }
>
> -static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
> -{
> -       while (!**ptr && *nbytes) {
> -               (*ptr)++;
> -               (*nbytes)--;
> -       }
> -}
> -
>  /**
>   * caam_read_rsa_crt - Used for reading dP, dQ, qInv CRT members.
>   * dP, dQ and qInv could decode to less than corresponding p, q length, as the
> --
> 2.7.4
>

Fixing these things I have tested the patch on my board and have not
seen any issues yet and it has booted to the prompt and I've checked
/sys/kernel/security/ima/ascii_runtime_measurements and can see all
the files that have been measured. :)

Cheers, Martin.
Fabio Estevam April 15, 2018, 11:07 a.m. UTC | #2
Hi Martin,

On Sun, Apr 15, 2018 at 5:01 AM, Martin Townsend
<mtownsend1973@gmail.com> wrote:

> Fixing these things I have tested the patch on my board and have not
> seen any issues yet and it has booted to the prompt and I've checked
> /sys/kernel/security/ima/ascii_runtime_measurements and can see all
> the files that have been measured. :)

Thanks for your feedback.

I have just sent a v2 with your suggestions.

If it works well for you, please reply with your Tested-by tag.

Thanks
diff mbox

Patch

diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
index 7a897209..d2ad547 100644
--- a/drivers/crypto/caam/caampkc.c
+++ b/drivers/crypto/caam/caampkc.c
@@ -166,6 +166,14 @@  static void rsa_priv_f3_done(struct device *dev, u32 *desc, u32 err,
 	akcipher_request_complete(req, err);
 }
 
+static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
+{
+	while (!**ptr && *nbytes) {
+		(*ptr)++;
+		(*nbytes)--;
+	}
+}
+
 static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
 					 size_t desclen)
 {
@@ -178,7 +186,34 @@  static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
 	int sgc;
 	int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
 	int src_nents, dst_nents;
+	const u8 *buffer;
+	size_t len;
+
+	buffer = kzalloc(req->src_len, GFP_ATOMIC);
+	if (!buffer)
+		return ERR_PTR(-ENOMEM);
+
+	sg_copy_to_buffer(req->src, sg_nents(req->src),
+			  (void *)buffer, req->src_len);
+	len = req->src_len;
 
+	/*
+	 * Check if the buffer contains leading zero and if
+	 * it does, drop the leading zero
+	 */
+	if (buffer[0] == 0) {
+		caam_rsa_drop_leading_zeros(&buffer, &len);
+		if (!buffer) {
+			kfree(buffer);
+			return ERR_PTR(-ENOMEM);
+		}
+
+		req->src_len -= 1;
+		sg_copy_from_buffer(req->src, sg_nents(req->src),
+				    (void *)buffer, req->src_len);
+	}
+
+	kfree(buffer);
 	src_nents = sg_nents_for_len(req->src, req->src_len);
 	dst_nents = sg_nents_for_len(req->dst, req->dst_len);
 
@@ -683,14 +718,6 @@  static void caam_rsa_free_key(struct caam_rsa_key *key)
 	memset(key, 0, sizeof(*key));
 }
 
-static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
-{
-	while (!**ptr && *nbytes) {
-		(*ptr)++;
-		(*nbytes)--;
-	}
-}
-
 /**
  * caam_read_rsa_crt - Used for reading dP, dQ, qInv CRT members.
  * dP, dQ and qInv could decode to less than corresponding p, q length, as the