| Message ID | 1523893966-8884-2-git-send-email-pawel.mikolaj.chmiel@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2018-04-17 0:52 GMT+09:00 Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>: > All banks with GPIO interrupts should be at beginning > of bank array and without any other types of banks between them. > This order is expected by exynos_eint_gpio_irq, when doing > interrupt group to bank translation. > Otherwise, kernel NULL pointer dereference would happen > when trying to handle interrupt, due to wrong bank being looked up. > Observed on s5pv210, when trying to handle gpj0 interrupt, > where kernel was mapping it to gpi bank. > > Cc: stable@vger.kernel.org > Fixes: 023e06dfa6882f500b9c86fd61f0b1913aa07f36 ("pinctrl: exynos: add exynos5410 SoC specific data") > Fixes: 608a26a7bc04a39cfd7041f31ca2b2100113d14e ("pinctrl: Add s5pv210 support to pinctrl-exynos) > Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> > --- > > Changes from v1: > - Limit changes to s5pv210 and Exynos5410. Exynos3250 will be handled later. > - Added cc stable > - Added fixes tag > --- > drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Thanks for the patch! Best regards, Tomasz
On Tue, Apr 17, 2018 at 4:12 AM, Tomasz Figa <tomasz.figa@gmail.com> wrote: > 2018-04-17 0:52 GMT+09:00 Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>: >> All banks with GPIO interrupts should be at beginning >> of bank array and without any other types of banks between them. >> This order is expected by exynos_eint_gpio_irq, when doing >> interrupt group to bank translation. >> Otherwise, kernel NULL pointer dereference would happen >> when trying to handle interrupt, due to wrong bank being looked up. >> Observed on s5pv210, when trying to handle gpj0 interrupt, >> where kernel was mapping it to gpi bank. >> >> Cc: stable@vger.kernel.org >> Fixes: 023e06dfa6882f500b9c86fd61f0b1913aa07f36 ("pinctrl: exynos: add exynos5410 SoC specific data") >> Fixes: 608a26a7bc04a39cfd7041f31ca2b2100113d14e ("pinctrl: Add s5pv210 support to pinctrl-exynos) Use short SHA (for example: git config --global core.abbrev 12; git config --global pretty.fixes 'Fixes: %h ("%s")' ; git config --global alias.sf 'show --pretty=fixes' ; git sf COMMIT). The subject prefix should be "pinctrl: samsung:" (git log --oneline -- drivers/pinctrl/samsung/). I fixed this, re-wrapped commit for 72-column and applied to my tree. Linus, I'll send them to you in pull request for next release cycle. Best regards, Krzysztof
On Wed, Apr 18, 2018 at 5:47 PM, Krzysztof Kozlowski <krzk@kernel.org> wrote: > I fixed this, re-wrapped commit for 72-column and applied to my tree. > > Linus, > I'll send them to you in pull request for next release cycle. OK waiting for that. Yours, Linus Walleij
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c index 90c2744..4f4ae66 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c @@ -105,12 +105,12 @@ static const struct samsung_pin_bank_data s5pv210_pin_bank[] __initconst = { EXYNOS_PIN_BANK_EINTG(7, 0x1c0, "gpg1", 0x38), EXYNOS_PIN_BANK_EINTG(7, 0x1e0, "gpg2", 0x3c), EXYNOS_PIN_BANK_EINTG(7, 0x200, "gpg3", 0x40), - EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"), EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x44), EXYNOS_PIN_BANK_EINTG(6, 0x260, "gpj1", 0x48), EXYNOS_PIN_BANK_EINTG(8, 0x280, "gpj2", 0x4c), EXYNOS_PIN_BANK_EINTG(8, 0x2a0, "gpj3", 0x50), EXYNOS_PIN_BANK_EINTG(5, 0x2c0, "gpj4", 0x54), + EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"), EXYNOS_PIN_BANK_EINTN(8, 0x2e0, "mp01"), EXYNOS_PIN_BANK_EINTN(4, 0x300, "mp02"), EXYNOS_PIN_BANK_EINTN(8, 0x320, "mp03"), @@ -630,7 +630,6 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc3", 0x20), EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc1", 0x24), EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc2", 0x28), - EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"), EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x2c), EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpe0", 0x30), EXYNOS_PIN_BANK_EINTG(2, 0x1C0, "gpe1", 0x34), @@ -641,6 +640,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = EXYNOS_PIN_BANK_EINTG(2, 0x260, "gpg2", 0x48), EXYNOS_PIN_BANK_EINTG(4, 0x280, "gph0", 0x4c), EXYNOS_PIN_BANK_EINTG(8, 0x2A0, "gph1", 0x50), + EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"), EXYNOS_PIN_BANK_EINTN(8, 0x2C0, "gpm7"), EXYNOS_PIN_BANK_EINTN(6, 0x2E0, "gpy0"), EXYNOS_PIN_BANK_EINTN(4, 0x300, "gpy1"),
All banks with GPIO interrupts should be at beginning of bank array and without any other types of banks between them. This order is expected by exynos_eint_gpio_irq, when doing interrupt group to bank translation. Otherwise, kernel NULL pointer dereference would happen when trying to handle interrupt, due to wrong bank being looked up. Observed on s5pv210, when trying to handle gpj0 interrupt, where kernel was mapping it to gpi bank. Cc: stable@vger.kernel.org Fixes: 023e06dfa6882f500b9c86fd61f0b1913aa07f36 ("pinctrl: exynos: add exynos5410 SoC specific data") Fixes: 608a26a7bc04a39cfd7041f31ca2b2100113d14e ("pinctrl: Add s5pv210 support to pinctrl-exynos) Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> --- Changes from v1: - Limit changes to s5pv210 and Exynos5410. Exynos3250 will be handled later. - Added cc stable - Added fixes tag --- drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)