| Message ID | 1524080715-23228-3-git-send-email-chandanu@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Wed, Apr 18, 2018 at 12:45:15PM -0700, Chandan Uddaraju wrote: > Current DSI driver uses two connectors for dual DSI case even > though we only have one panel. Fix this by implementing one > connector/bridge for dual DSI use case. Use master DSI > controllers to register one connector/bridge. > > Changes in V2: > -Removed Change-Id from the commit text tags. > -Remove extra parentheses > > Changes in V3: > -None > > Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> > --- > drivers/gpu/drm/msm/dsi/dsi.c | 3 + > drivers/gpu/drm/msm/dsi/dsi.h | 1 + > drivers/gpu/drm/msm/dsi/dsi_manager.c | 110 ++++++++-------------------------- > 3 files changed, 29 insertions(+), 85 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c > index b744bcc..ff8164c 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi.c > +++ b/drivers/gpu/drm/msm/dsi/dsi.c > @@ -208,6 +208,9 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev, > goto fail; > } > > + if (!msm_dsi_manager_validate_current_config(msm_dsi->id)) > + goto fail; > + > msm_dsi->encoder = encoder; > > msm_dsi->bridge = msm_dsi_manager_bridge_init(msm_dsi->id); > diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h > index 01c38f6..c858e8e 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi.h > +++ b/drivers/gpu/drm/msm/dsi/dsi.h > @@ -100,6 +100,7 @@ struct msm_dsi { > void msm_dsi_manager_attach_dsi_device(int id, u32 device_flags); > int msm_dsi_manager_register(struct msm_dsi *msm_dsi); > void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi); > +bool msm_dsi_manager_validate_current_config(u8 id); > > /* msm dsi */ > static inline bool msm_dsi_device_connected(struct msm_dsi *msm_dsi) > diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c > index 3bb506b..2a11f82 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c > +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c > @@ -306,67 +306,6 @@ static void dsi_mgr_connector_destroy(struct drm_connector *connector) > kfree(dsi_connector); > } > > -static void dsi_dual_connector_fix_modes(struct drm_connector *connector) > -{ > - struct drm_display_mode *mode, *m; > - > - /* Only support left-right mode */ > - list_for_each_entry_safe(mode, m, &connector->probed_modes, head) { > - mode->clock >>= 1; > - mode->hdisplay >>= 1; > - mode->hsync_start >>= 1; > - mode->hsync_end >>= 1; > - mode->htotal >>= 1; > - drm_mode_set_name(mode); > - } > -} > - > -static int dsi_dual_connector_tile_init( > - struct drm_connector *connector, int id) > -{ > - struct drm_display_mode *mode; > - /* Fake topology id */ > - char topo_id[8] = {'M', 'S', 'M', 'D', 'U', 'D', 'S', 'I'}; > - > - if (connector->tile_group) { > - DBG("Tile property has been initialized"); > - return 0; > - } > - > - /* Use the first mode only for now */ > - mode = list_first_entry(&connector->probed_modes, > - struct drm_display_mode, > - head); > - if (!mode) > - return -EINVAL; > - > - connector->tile_group = drm_mode_get_tile_group( > - connector->dev, topo_id); > - if (!connector->tile_group) > - connector->tile_group = drm_mode_create_tile_group( > - connector->dev, topo_id); > - if (!connector->tile_group) { > - pr_err("%s: failed to create tile group\n", __func__); > - return -ENOMEM; > - } > - > - connector->has_tile = true; > - connector->tile_is_single_monitor = true; > - > - /* mode has been fixed */ > - connector->tile_h_size = mode->hdisplay; > - connector->tile_v_size = mode->vdisplay; > - > - /* Only support left-right mode */ > - connector->num_h_tile = 2; > - connector->num_v_tile = 1; > - > - connector->tile_v_loc = 0; > - connector->tile_h_loc = (id == DSI_RIGHT) ? 1 : 0; > - > - return 0; > -} > - > static int dsi_mgr_connector_get_modes(struct drm_connector *connector) > { > int id = dsi_mgr_connector_get_id(connector); > @@ -377,31 +316,15 @@ static int dsi_mgr_connector_get_modes(struct drm_connector *connector) > if (!panel) > return 0; > > - /* Since we have 2 connectors, but only 1 drm_panel in dual DSI mode, > - * panel should not attach to any connector. > - * Only temporarily attach panel to the current connector here, > - * to let panel set mode to this connector. > + /* > + * In dual DSI mode, we have one connector that can be > + * attached to the drm_panel. > */ > drm_panel_attach(panel, connector); > num = drm_panel_get_modes(panel); > - drm_panel_detach(panel); > if (!num) > return 0; > > - if (IS_DUAL_DSI()) { > - /* report half resolution to user */ > - dsi_dual_connector_fix_modes(connector); > - ret = dsi_dual_connector_tile_init(connector, id); > - if (ret) > - return ret; > - ret = drm_mode_connector_set_tile_property(connector); > - if (ret) { > - pr_err("%s: set tile property failed, %d\n", > - __func__, ret); > - return ret; > - } > - } > - > return num; > } > > @@ -455,8 +378,8 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) > if (ret) > goto phy_en_fail; > > - /* Do nothing with the host if it is DSI 1 in case of dual DSI */ > - if (is_dual_dsi && (DSI_1 == id)) > + /* Do nothing with the host if it is slave-DSI in case of dual DSI */ > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) > return; > > ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_dual_dsi); > @@ -557,11 +480,11 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) > return; > > /* > - * Do nothing with the host if it is DSI 1 in case of dual DSI. > + * Do nothing with the host if it is slave-DSI in case of dual DSI. > * It is safe to call dsi_mgr_phy_disable() here because a single PHY > * won't be diabled until both PHYs request disable. > */ > - if (is_dual_dsi && (DSI_1 == id)) > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) > goto disable_phy; > > if (panel) { > @@ -622,7 +545,7 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge, > mode->vsync_end, mode->vtotal, > mode->type, mode->flags); > > - if (is_dual_dsi && (DSI_1 == id)) > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) > return; > > msm_dsi_host_set_display_mode(host, adjusted_mode); > @@ -690,6 +613,23 @@ struct drm_connector *msm_dsi_manager_connector_init(u8 id) > return connector; > } > > +bool msm_dsi_manager_validate_current_config(u8 id) > +{ > + bool is_dual_dsi = IS_DUAL_DSI(); > + > + /* > + * For dual DSI, we only have one drm panel. For this > + * use case, we register only one bridge/connector. > + * Skip bridge/connector initialisation if it is > + * slave-DSI for dual DSI configuration. > + */ > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) { > + DBG("Skip bridge registration for slave DSI->id: %d\n", id); > + return false; > + } > + return true; > +} > + > /* initialize bridge */ > struct drm_bridge *msm_dsi_manager_bridge_init(u8 id) > { > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
On Wed, Apr 18, 2018 at 12:45:15PM -0700, Chandan Uddaraju wrote: > Current DSI driver uses two connectors for dual DSI case even > though we only have one panel. Fix this by implementing one > connector/bridge for dual DSI use case. Use master DSI > controllers to register one connector/bridge. > > Changes in V2: > -Removed Change-Id from the commit text tags. > -Remove extra parentheses > > Changes in V3: > -None > > Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> > --- > drivers/gpu/drm/msm/dsi/dsi.c | 3 + > drivers/gpu/drm/msm/dsi/dsi.h | 1 + > drivers/gpu/drm/msm/dsi/dsi_manager.c | 110 ++++++++-------------------------- > 3 files changed, 29 insertions(+), 85 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c > index b744bcc..ff8164c 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi.c > +++ b/drivers/gpu/drm/msm/dsi/dsi.c > @@ -208,6 +208,9 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev, > goto fail; > } > > + if (!msm_dsi_manager_validate_current_config(msm_dsi->id)) > + goto fail; > + > msm_dsi->encoder = encoder; > > msm_dsi->bridge = msm_dsi_manager_bridge_init(msm_dsi->id); > diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h > index 01c38f6..c858e8e 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi.h > +++ b/drivers/gpu/drm/msm/dsi/dsi.h > @@ -100,6 +100,7 @@ struct msm_dsi { > void msm_dsi_manager_attach_dsi_device(int id, u32 device_flags); > int msm_dsi_manager_register(struct msm_dsi *msm_dsi); > void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi); > +bool msm_dsi_manager_validate_current_config(u8 id); > > /* msm dsi */ > static inline bool msm_dsi_device_connected(struct msm_dsi *msm_dsi) > diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c > index 3bb506b..2a11f82 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c > +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c > @@ -306,67 +306,6 @@ static void dsi_mgr_connector_destroy(struct drm_connector *connector) > kfree(dsi_connector); > } > > -static void dsi_dual_connector_fix_modes(struct drm_connector *connector) > -{ > - struct drm_display_mode *mode, *m; > - > - /* Only support left-right mode */ > - list_for_each_entry_safe(mode, m, &connector->probed_modes, head) { > - mode->clock >>= 1; > - mode->hdisplay >>= 1; > - mode->hsync_start >>= 1; > - mode->hsync_end >>= 1; > - mode->htotal >>= 1; > - drm_mode_set_name(mode); > - } > -} > - > -static int dsi_dual_connector_tile_init( > - struct drm_connector *connector, int id) > -{ > - struct drm_display_mode *mode; > - /* Fake topology id */ > - char topo_id[8] = {'M', 'S', 'M', 'D', 'U', 'D', 'S', 'I'}; > - > - if (connector->tile_group) { > - DBG("Tile property has been initialized"); > - return 0; > - } > - > - /* Use the first mode only for now */ > - mode = list_first_entry(&connector->probed_modes, > - struct drm_display_mode, > - head); > - if (!mode) > - return -EINVAL; > - > - connector->tile_group = drm_mode_get_tile_group( > - connector->dev, topo_id); > - if (!connector->tile_group) > - connector->tile_group = drm_mode_create_tile_group( > - connector->dev, topo_id); > - if (!connector->tile_group) { > - pr_err("%s: failed to create tile group\n", __func__); > - return -ENOMEM; > - } > - > - connector->has_tile = true; > - connector->tile_is_single_monitor = true; > - > - /* mode has been fixed */ > - connector->tile_h_size = mode->hdisplay; > - connector->tile_v_size = mode->vdisplay; > - > - /* Only support left-right mode */ > - connector->num_h_tile = 2; > - connector->num_v_tile = 1; > - > - connector->tile_v_loc = 0; > - connector->tile_h_loc = (id == DSI_RIGHT) ? 1 : 0; > - > - return 0; > -} > - > static int dsi_mgr_connector_get_modes(struct drm_connector *connector) > { > int id = dsi_mgr_connector_get_id(connector); > @@ -377,31 +316,15 @@ static int dsi_mgr_connector_get_modes(struct drm_connector *connector) > if (!panel) > return 0; > > - /* Since we have 2 connectors, but only 1 drm_panel in dual DSI mode, > - * panel should not attach to any connector. > - * Only temporarily attach panel to the current connector here, > - * to let panel set mode to this connector. > + /* > + * In dual DSI mode, we have one connector that can be > + * attached to the drm_panel. > */ > drm_panel_attach(panel, connector); > num = drm_panel_get_modes(panel); > - drm_panel_detach(panel); > if (!num) > return 0; > > - if (IS_DUAL_DSI()) { > - /* report half resolution to user */ > - dsi_dual_connector_fix_modes(connector); > - ret = dsi_dual_connector_tile_init(connector, id); > - if (ret) > - return ret; > - ret = drm_mode_connector_set_tile_property(connector); > - if (ret) { > - pr_err("%s: set tile property failed, %d\n", > - __func__, ret); > - return ret; > - } > - } > - > return num; > } > > @@ -455,8 +378,8 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) > if (ret) > goto phy_en_fail; > > - /* Do nothing with the host if it is DSI 1 in case of dual DSI */ > - if (is_dual_dsi && (DSI_1 == id)) > + /* Do nothing with the host if it is slave-DSI in case of dual DSI */ > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) > return; > > ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_dual_dsi); > @@ -557,11 +480,11 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) > return; > > /* > - * Do nothing with the host if it is DSI 1 in case of dual DSI. > + * Do nothing with the host if it is slave-DSI in case of dual DSI. > * It is safe to call dsi_mgr_phy_disable() here because a single PHY > * won't be diabled until both PHYs request disable. > */ > - if (is_dual_dsi && (DSI_1 == id)) > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) > goto disable_phy; > > if (panel) { > @@ -622,7 +545,7 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge, > mode->vsync_end, mode->vtotal, > mode->type, mode->flags); > > - if (is_dual_dsi && (DSI_1 == id)) > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) > return; > > msm_dsi_host_set_display_mode(host, adjusted_mode); > @@ -690,6 +613,23 @@ struct drm_connector *msm_dsi_manager_connector_init(u8 id) > return connector; > } > > +bool msm_dsi_manager_validate_current_config(u8 id) > +{ > + bool is_dual_dsi = IS_DUAL_DSI(); > + > + /* > + * For dual DSI, we only have one drm panel. For this > + * use case, we register only one bridge/connector. > + * Skip bridge/connector initialisation if it is > + * slave-DSI for dual DSI configuration. > + */ > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) { > + DBG("Skip bridge registration for slave DSI->id: %d\n", id); > + return false; > + } > + return true; > +} > + > /* initialize bridge */ > struct drm_bridge *msm_dsi_manager_bridge_init(u8 id) > { > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
On Thursday 19 April 2018 01:15 AM, Chandan Uddaraju wrote: > Current DSI driver uses two connectors for dual DSI case even > though we only have one panel. Fix this by implementing one > connector/bridge for dual DSI use case. Use master DSI > controllers to register one connector/bridge. > > Changes in V2: > -Removed Change-Id from the commit text tags. > -Remove extra parentheses > > Changes in V3: > -None Reviewed-by: Archit Taneja <architt@codeaurora.org> > > Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> > --- > drivers/gpu/drm/msm/dsi/dsi.c | 3 + > drivers/gpu/drm/msm/dsi/dsi.h | 1 + > drivers/gpu/drm/msm/dsi/dsi_manager.c | 110 ++++++++-------------------------- > 3 files changed, 29 insertions(+), 85 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c > index b744bcc..ff8164c 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi.c > +++ b/drivers/gpu/drm/msm/dsi/dsi.c > @@ -208,6 +208,9 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev, > goto fail; > } > > + if (!msm_dsi_manager_validate_current_config(msm_dsi->id)) > + goto fail; > + > msm_dsi->encoder = encoder; > > msm_dsi->bridge = msm_dsi_manager_bridge_init(msm_dsi->id); > diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h > index 01c38f6..c858e8e 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi.h > +++ b/drivers/gpu/drm/msm/dsi/dsi.h > @@ -100,6 +100,7 @@ struct msm_dsi { > void msm_dsi_manager_attach_dsi_device(int id, u32 device_flags); > int msm_dsi_manager_register(struct msm_dsi *msm_dsi); > void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi); > +bool msm_dsi_manager_validate_current_config(u8 id); > > /* msm dsi */ > static inline bool msm_dsi_device_connected(struct msm_dsi *msm_dsi) > diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c > index 3bb506b..2a11f82 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c > +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c > @@ -306,67 +306,6 @@ static void dsi_mgr_connector_destroy(struct drm_connector *connector) > kfree(dsi_connector); > } > > -static void dsi_dual_connector_fix_modes(struct drm_connector *connector) > -{ > - struct drm_display_mode *mode, *m; > - > - /* Only support left-right mode */ > - list_for_each_entry_safe(mode, m, &connector->probed_modes, head) { > - mode->clock >>= 1; > - mode->hdisplay >>= 1; > - mode->hsync_start >>= 1; > - mode->hsync_end >>= 1; > - mode->htotal >>= 1; > - drm_mode_set_name(mode); > - } > -} > - > -static int dsi_dual_connector_tile_init( > - struct drm_connector *connector, int id) > -{ > - struct drm_display_mode *mode; > - /* Fake topology id */ > - char topo_id[8] = {'M', 'S', 'M', 'D', 'U', 'D', 'S', 'I'}; > - > - if (connector->tile_group) { > - DBG("Tile property has been initialized"); > - return 0; > - } > - > - /* Use the first mode only for now */ > - mode = list_first_entry(&connector->probed_modes, > - struct drm_display_mode, > - head); > - if (!mode) > - return -EINVAL; > - > - connector->tile_group = drm_mode_get_tile_group( > - connector->dev, topo_id); > - if (!connector->tile_group) > - connector->tile_group = drm_mode_create_tile_group( > - connector->dev, topo_id); > - if (!connector->tile_group) { > - pr_err("%s: failed to create tile group\n", __func__); > - return -ENOMEM; > - } > - > - connector->has_tile = true; > - connector->tile_is_single_monitor = true; > - > - /* mode has been fixed */ > - connector->tile_h_size = mode->hdisplay; > - connector->tile_v_size = mode->vdisplay; > - > - /* Only support left-right mode */ > - connector->num_h_tile = 2; > - connector->num_v_tile = 1; > - > - connector->tile_v_loc = 0; > - connector->tile_h_loc = (id == DSI_RIGHT) ? 1 : 0; > - > - return 0; > -} > - > static int dsi_mgr_connector_get_modes(struct drm_connector *connector) > { > int id = dsi_mgr_connector_get_id(connector); > @@ -377,31 +316,15 @@ static int dsi_mgr_connector_get_modes(struct drm_connector *connector) > if (!panel) > return 0; > > - /* Since we have 2 connectors, but only 1 drm_panel in dual DSI mode, > - * panel should not attach to any connector. > - * Only temporarily attach panel to the current connector here, > - * to let panel set mode to this connector. > + /* > + * In dual DSI mode, we have one connector that can be > + * attached to the drm_panel. > */ > drm_panel_attach(panel, connector); > num = drm_panel_get_modes(panel); > - drm_panel_detach(panel); > if (!num) > return 0; > > - if (IS_DUAL_DSI()) { > - /* report half resolution to user */ > - dsi_dual_connector_fix_modes(connector); > - ret = dsi_dual_connector_tile_init(connector, id); > - if (ret) > - return ret; > - ret = drm_mode_connector_set_tile_property(connector); > - if (ret) { > - pr_err("%s: set tile property failed, %d\n", > - __func__, ret); > - return ret; > - } > - } > - > return num; > } > > @@ -455,8 +378,8 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) > if (ret) > goto phy_en_fail; > > - /* Do nothing with the host if it is DSI 1 in case of dual DSI */ > - if (is_dual_dsi && (DSI_1 == id)) > + /* Do nothing with the host if it is slave-DSI in case of dual DSI */ > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) > return; > > ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_dual_dsi); > @@ -557,11 +480,11 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) > return; > > /* > - * Do nothing with the host if it is DSI 1 in case of dual DSI. > + * Do nothing with the host if it is slave-DSI in case of dual DSI. > * It is safe to call dsi_mgr_phy_disable() here because a single PHY > * won't be diabled until both PHYs request disable. > */ > - if (is_dual_dsi && (DSI_1 == id)) > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) > goto disable_phy; > > if (panel) { > @@ -622,7 +545,7 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge, > mode->vsync_end, mode->vtotal, > mode->type, mode->flags); > > - if (is_dual_dsi && (DSI_1 == id)) > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) > return; > > msm_dsi_host_set_display_mode(host, adjusted_mode); > @@ -690,6 +613,23 @@ struct drm_connector *msm_dsi_manager_connector_init(u8 id) > return connector; > } > > +bool msm_dsi_manager_validate_current_config(u8 id) > +{ > + bool is_dual_dsi = IS_DUAL_DSI(); > + > + /* > + * For dual DSI, we only have one drm panel. For this > + * use case, we register only one bridge/connector. > + * Skip bridge/connector initialisation if it is > + * slave-DSI for dual DSI configuration. > + */ > + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) { > + DBG("Skip bridge registration for slave DSI->id: %d\n", id); > + return false; > + } > + return true; > +} > + > /* initialize bridge */ > struct drm_bridge *msm_dsi_manager_bridge_init(u8 id) > { > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c index b744bcc..ff8164c 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.c +++ b/drivers/gpu/drm/msm/dsi/dsi.c @@ -208,6 +208,9 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev, goto fail; } + if (!msm_dsi_manager_validate_current_config(msm_dsi->id)) + goto fail; + msm_dsi->encoder = encoder; msm_dsi->bridge = msm_dsi_manager_bridge_init(msm_dsi->id); diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h index 01c38f6..c858e8e 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.h +++ b/drivers/gpu/drm/msm/dsi/dsi.h @@ -100,6 +100,7 @@ struct msm_dsi { void msm_dsi_manager_attach_dsi_device(int id, u32 device_flags); int msm_dsi_manager_register(struct msm_dsi *msm_dsi); void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi); +bool msm_dsi_manager_validate_current_config(u8 id); /* msm dsi */ static inline bool msm_dsi_device_connected(struct msm_dsi *msm_dsi) diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c index 3bb506b..2a11f82 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c @@ -306,67 +306,6 @@ static void dsi_mgr_connector_destroy(struct drm_connector *connector) kfree(dsi_connector); } -static void dsi_dual_connector_fix_modes(struct drm_connector *connector) -{ - struct drm_display_mode *mode, *m; - - /* Only support left-right mode */ - list_for_each_entry_safe(mode, m, &connector->probed_modes, head) { - mode->clock >>= 1; - mode->hdisplay >>= 1; - mode->hsync_start >>= 1; - mode->hsync_end >>= 1; - mode->htotal >>= 1; - drm_mode_set_name(mode); - } -} - -static int dsi_dual_connector_tile_init( - struct drm_connector *connector, int id) -{ - struct drm_display_mode *mode; - /* Fake topology id */ - char topo_id[8] = {'M', 'S', 'M', 'D', 'U', 'D', 'S', 'I'}; - - if (connector->tile_group) { - DBG("Tile property has been initialized"); - return 0; - } - - /* Use the first mode only for now */ - mode = list_first_entry(&connector->probed_modes, - struct drm_display_mode, - head); - if (!mode) - return -EINVAL; - - connector->tile_group = drm_mode_get_tile_group( - connector->dev, topo_id); - if (!connector->tile_group) - connector->tile_group = drm_mode_create_tile_group( - connector->dev, topo_id); - if (!connector->tile_group) { - pr_err("%s: failed to create tile group\n", __func__); - return -ENOMEM; - } - - connector->has_tile = true; - connector->tile_is_single_monitor = true; - - /* mode has been fixed */ - connector->tile_h_size = mode->hdisplay; - connector->tile_v_size = mode->vdisplay; - - /* Only support left-right mode */ - connector->num_h_tile = 2; - connector->num_v_tile = 1; - - connector->tile_v_loc = 0; - connector->tile_h_loc = (id == DSI_RIGHT) ? 1 : 0; - - return 0; -} - static int dsi_mgr_connector_get_modes(struct drm_connector *connector) { int id = dsi_mgr_connector_get_id(connector); @@ -377,31 +316,15 @@ static int dsi_mgr_connector_get_modes(struct drm_connector *connector) if (!panel) return 0; - /* Since we have 2 connectors, but only 1 drm_panel in dual DSI mode, - * panel should not attach to any connector. - * Only temporarily attach panel to the current connector here, - * to let panel set mode to this connector. + /* + * In dual DSI mode, we have one connector that can be + * attached to the drm_panel. */ drm_panel_attach(panel, connector); num = drm_panel_get_modes(panel); - drm_panel_detach(panel); if (!num) return 0; - if (IS_DUAL_DSI()) { - /* report half resolution to user */ - dsi_dual_connector_fix_modes(connector); - ret = dsi_dual_connector_tile_init(connector, id); - if (ret) - return ret; - ret = drm_mode_connector_set_tile_property(connector); - if (ret) { - pr_err("%s: set tile property failed, %d\n", - __func__, ret); - return ret; - } - } - return num; } @@ -455,8 +378,8 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) if (ret) goto phy_en_fail; - /* Do nothing with the host if it is DSI 1 in case of dual DSI */ - if (is_dual_dsi && (DSI_1 == id)) + /* Do nothing with the host if it is slave-DSI in case of dual DSI */ + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) return; ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_dual_dsi); @@ -557,11 +480,11 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) return; /* - * Do nothing with the host if it is DSI 1 in case of dual DSI. + * Do nothing with the host if it is slave-DSI in case of dual DSI. * It is safe to call dsi_mgr_phy_disable() here because a single PHY * won't be diabled until both PHYs request disable. */ - if (is_dual_dsi && (DSI_1 == id)) + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) goto disable_phy; if (panel) { @@ -622,7 +545,7 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge, mode->vsync_end, mode->vtotal, mode->type, mode->flags); - if (is_dual_dsi && (DSI_1 == id)) + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) return; msm_dsi_host_set_display_mode(host, adjusted_mode); @@ -690,6 +613,23 @@ struct drm_connector *msm_dsi_manager_connector_init(u8 id) return connector; } +bool msm_dsi_manager_validate_current_config(u8 id) +{ + bool is_dual_dsi = IS_DUAL_DSI(); + + /* + * For dual DSI, we only have one drm panel. For this + * use case, we register only one bridge/connector. + * Skip bridge/connector initialisation if it is + * slave-DSI for dual DSI configuration. + */ + if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) { + DBG("Skip bridge registration for slave DSI->id: %d\n", id); + return false; + } + return true; +} + /* initialize bridge */ struct drm_bridge *msm_dsi_manager_bridge_init(u8 id) {
Current DSI driver uses two connectors for dual DSI case even though we only have one panel. Fix this by implementing one connector/bridge for dual DSI use case. Use master DSI controllers to register one connector/bridge. Changes in V2: -Removed Change-Id from the commit text tags. -Remove extra parentheses Changes in V3: -None Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> --- drivers/gpu/drm/msm/dsi/dsi.c | 3 + drivers/gpu/drm/msm/dsi/dsi.h | 1 + drivers/gpu/drm/msm/dsi/dsi_manager.c | 110 ++++++++-------------------------- 3 files changed, 29 insertions(+), 85 deletions(-)