diff mbox

[RFC,05/10] i2c: s3c2410: Remove support for Exynos5440

Message ID 20180424203239.21885-6-krzk@kernel.org (mailing list archive)
State New, archived
Headers show

Commit Message

Krzysztof Kozlowski April 24, 2018, 8:32 p.m. UTC
The Exynos5440 is not actively developed, there are no development
boards available and probably there are no real products with it.
Remove wide-tree support for Exynos5440.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt | 4 +---
 drivers/i2c/busses/i2c-s3c2410.c                      | 2 --
 2 files changed, 1 insertion(+), 5 deletions(-)

Comments

On 04/24/2018 10:32 PM, Krzysztof Kozlowski wrote:
> The Exynos5440 is not actively developed, there are no development
> boards available and probably there are no real products with it.
> Remove wide-tree support for Exynos5440.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Andi Shyti April 26, 2018, 4:33 a.m. UTC | #2
Hi Krzysztof,

On 25.04.2018 05:32, Krzysztof Kozlowski wrote:
> The Exynos5440 is not actively developed, there are no development
> boards available and probably there are no real products with it.
> Remove wide-tree support for Exynos5440.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

looks good, Reviewed-by: Andi Shyti <andi@etezian.org>

Thanks,
Andi
Wolfram Sang April 28, 2018, 12:44 p.m. UTC | #3
On Tue, Apr 24, 2018 at 10:32:34PM +0200, Krzysztof Kozlowski wrote:
> The Exynos5440 is not actively developed, there are no development
> boards available and probably there are no real products with it.
> Remove wide-tree support for Exynos5440.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Applied to for-next, thanks!
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
index 89b3250f049b..66ae46d3bc2f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -8,9 +8,7 @@  Required properties:
       (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
       (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
           inside HDMIPHY block found on several samsung SoCs
-      (d) "samsung, exynos5440-i2c", for s3c2440-like i2c used
-	   on EXYNOS5440 which does not need GPIO configuration.
-      (e) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as
+      (d) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as
 	   a host to SATA PHY controller on an internal bus.
   - reg: physical base address of the controller and length of memory mapped
     region.
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 5d97510ee48b..9fe2b6951895 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -154,8 +154,6 @@  static const struct of_device_id s3c24xx_i2c_match[] = {
 	{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
 	{ .compatible = "samsung,s3c2440-hdmiphy-i2c",
 	  .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
-	{ .compatible = "samsung,exynos5440-i2c",
-	  .data = (void *)(QUIRK_S3C2440 | QUIRK_NO_GPIO) },
 	{ .compatible = "samsung,exynos5-sata-phy-i2c",
 	  .data = (void *)(QUIRK_S3C2440 | QUIRK_POLL | QUIRK_NO_GPIO) },
 	{},