@@ -55,6 +55,13 @@ struct tas6424_data {
*/
static DECLARE_TLV_DB_SCALE(dac_tlv, -10350, 50, 0);
+
+static const char * const diags_enum_texts[] = {"OFF", "ON"};
+static unsigned int diags_enum_values[] = {1, 0};
+SOC_VALUE_ENUM_SINGLE_DECL(diags_enum, TAS6424_DC_DIAG_CTRL1,
+ TAS6424_LDGBYPASS_SHIFT, TAS6424_LDGBYPASS_MASK,
+ diags_enum_texts, diags_enum_values);
+
static const struct snd_kcontrol_new tas6424_snd_controls[] = {
SOC_SINGLE_TLV("Speaker Driver CH1 Playback Volume",
TAS6424_CH1_VOL_CTRL, 0, 0xff, 0, dac_tlv),
@@ -64,6 +71,7 @@ static const struct snd_kcontrol_new tas6424_snd_controls[] = {
TAS6424_CH3_VOL_CTRL, 0, 0xff, 0, dac_tlv),
SOC_SINGLE_TLV("Speaker Driver CH4 Playback Volume",
TAS6424_CH4_VOL_CTRL, 0, 0xff, 0, dac_tlv),
+ SOC_ENUM("Auto Diagnostics", diags_enum),
};
static int tas6424_dac_event(struct snd_soc_dapm_widget *w,
@@ -297,6 +305,11 @@ static int tas6424_power_on(struct snd_soc_component *component)
struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component);
int ret;
u8 chan_states;
+ int no_auto_diags = 0;
+ unsigned int reg_val;
+
+ if (!regmap_read(tas6424->regmap, TAS6424_DC_DIAG_CTRL1, ®_val))
+ no_auto_diags = reg_val & TAS6424_LDGBYPASS_MASK;
ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies),
tas6424->supplies);
@@ -327,9 +340,11 @@ static int tas6424_power_on(struct snd_soc_component *component)
snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, chan_states);
/* any time we come out of HIZ, the output channels automatically run DC
- * load diagnostics, wait here until this completes
+ * load diagnostics if autodiagnotics are enabled. wait here until this
+ * completes.
*/
- msleep(230);
+ if (!no_auto_diags)
+ msleep(230);
return 0;
}
@@ -111,6 +111,10 @@
TAS6424_CH3_STATE_DIAG | \
TAS6424_CH4_STATE_DIAG)
+/* TAS6424_DC_DIAG_CTRL1 */
+#define TAS6424_LDGBYPASS_SHIFT 0
+#define TAS6424_LDGBYPASS_MASK BIT(TAS6424_LDGBYPASS_SHIFT)
+
/* TAS6424_GLOB_FAULT1_REG */
#define TAS6424_FAULT_CLOCK BIT(4)
#define TAS6424_FAULT_PVDD_OV BIT(3)
The TAS6424 incorporates both DC-load and AC-load diagnostics which are used to determine the status of the load. The DC diagnostics runs when any channel is directed to leave the Hi-Z state and enter the MUTE or PLAY state. The DC diagnostics are turned on by default but, if a fast startup without diagnostics is required, the diagnostics can be disabled using a dedicated ALSA control. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> --- sound/soc/codecs/tas6424.c | 19 +++++++++++++++++-- sound/soc/codecs/tas6424.h | 4 ++++ 2 files changed, 21 insertions(+), 2 deletions(-)