| Message ID | 1525357562-20810-3-git-send-email-robert.chiras@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, May 03, 2018 at 05:26:02PM +0300, Robert Chiras wrote: > Signed-off-by: Robert Chiras <robert.chiras@nxp.com> > --- > .../bindings/display/panel/raydium,rm67191.txt | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt > new file mode 100644 > index 0000000..0fe6d4b > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt > @@ -0,0 +1,38 @@ > +Raydium RM67171 OLED LCD panel with MIPI-DSI protocol > + > +Required properties: > +- compatible: "raydium,rm67191" > +- reg: virtual channel for MIPI-DSI protocol > + must be <0> > +- dsi-lanes: number of DSI lanes to be used > + must be <3> or <4> > +- port: input port node with endpoint definition as > + defined in Documentation/devicetree/bindings/graph.txt; > + the input port should be connected to a MIPI-DSI device > + driver > + > +Optional properties: > +- reset-gpio: a GPIO spec for the RST_B GPIO pin > +- pinctrl-0 phandle to the pin settings for the reset pin > +- panel-width-mm: physical panel width [mm] > +- panel-height-mm: physical panel height [mm] width-mm and height-mm are the common property names. > + > +[1]: Documentation/devicetree/bindings/display/display-timing.txt Footnote to what?
On Lu, 2018-05-07 at 11:50 -0500, Rob Herring wrote: > On Thu, May 03, 2018 at 05:26:02PM +0300, Robert Chiras wrote: > > > > Signed-off-by: Robert Chiras <robert.chiras@nxp.com> > > --- > > .../bindings/display/panel/raydium,rm67191.txt | 38 > > ++++++++++++++++++++++ > > 1 file changed, 38 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt > > > > diff --git > > a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t > > xt > > b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t > > xt > > new file mode 100644 > > index 0000000..0fe6d4b > > --- /dev/null > > +++ > > b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t > > xt > > @@ -0,0 +1,38 @@ > > +Raydium RM67171 OLED LCD panel with MIPI-DSI protocol > > + > > +Required properties: > > +- compatible: "raydium,rm67191" > > +- reg: virtual channel for MIPI-DSI > > protocol > > + must be <0> > > +- dsi-lanes: number of DSI lanes to be used > > + must be <3> or <4> > > +- port: input port node with endpoint definition > > as > > + defined in > > Documentation/devicetree/bindings/graph.txt; > > + the input port should be connected to a > > MIPI-DSI device > > + driver > > + > > +Optional properties: > > +- reset-gpio: a GPIO spec for the RST_B GPIO pin > > +- pinctrl-0 phandle to the pin settings for the > > reset pin > > +- panel-width-mm: physical panel width [mm] > > +- panel-height-mm: physical panel height [mm] > width-mm and height-mm are the common property names. OK, I will change them accordingly. > > > > > + > > +[1]: Documentation/devicetree/bindings/display/display-timing.txt > Footnote to what? In the previous version it had an optional display-timing property. I removed it in this version, but I forgot to remove the footnote. I will remove this in the next version of the patch-set. >
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt new file mode 100644 index 0000000..0fe6d4b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt @@ -0,0 +1,38 @@ +Raydium RM67171 OLED LCD panel with MIPI-DSI protocol + +Required properties: +- compatible: "raydium,rm67191" +- reg: virtual channel for MIPI-DSI protocol + must be <0> +- dsi-lanes: number of DSI lanes to be used + must be <3> or <4> +- port: input port node with endpoint definition as + defined in Documentation/devicetree/bindings/graph.txt; + the input port should be connected to a MIPI-DSI device + driver + +Optional properties: +- reset-gpio: a GPIO spec for the RST_B GPIO pin +- pinctrl-0 phandle to the pin settings for the reset pin +- panel-width-mm: physical panel width [mm] +- panel-height-mm: physical panel height [mm] + +[1]: Documentation/devicetree/bindings/display/display-timing.txt + +Example: + + panel@0 { + compatible = "raydium,rm67191"; + reg = <0>; + pinctrl-0 = <&pinctrl_mipi_dsi_0_1_en>; + reset-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + dsi-lanes = <4>; + panel-width-mm = <68>; + panel-height-mm = <121>; + + port { + panel1_in: endpoint { + remote-endpoint = <&mipi1_out>; + }; + }; + };
Signed-off-by: Robert Chiras <robert.chiras@nxp.com> --- .../bindings/display/panel/raydium,rm67191.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt