diff mbox

arm64: dts: qcom: sdm845: Sort nodes in the soc by address

Message ID 20180504220356.261711-1-dianders@chromium.org (mailing list archive)
State New, archived
Delegated to: Andy Gross
Headers show

Commit Message

Doug Anderson May 4, 2018, 10:03 p.m. UTC 
This is pure-churn and should be a no-op.  I'm doing it in the hopes
of reducing merge conflicts.  When things are sorted in a sane way
(and by base address seems sane) then it's less likely that future
patches will cause merge conflicts.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 152 +++++++++++++--------------
 1 file changed, 76 insertions(+), 76 deletions(-)

Comments

Bjorn Andersson May 7, 2018, 6:49 p.m. UTC | #1 
On Fri 04 May 15:03 PDT 2018, Douglas Anderson wrote:

> This is pure-churn and should be a no-op.  I'm doing it in the hopes
> of reducing merge conflicts.  When things are sorted in a sane way
> (and by base address seems sane) then it's less likely that future
> patches will cause merge conflicts.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Nice, I like it.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 486ace9a9e8b..101350743bd2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -158,32 +158,50 @@ 
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
-		intc: interrupt-controller@17a00000 {
-			compatible = "arm,gic-v3";
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm845";
+			reg = <0x100000 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0xac0000 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc 105>,
+				 <&gcc 106>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x17a00000 0x10000>,     /* GICD */
-			      <0x17a60000 0x100000>;    /* GICR * 8 */
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 
-			gic-its@17a40000 {
-				compatible = "arm,gic-v3-its";
-				msi-controller;
-				#msi-cells = <1>;
-				reg = <0x17a40000 0x20000>;
+			uart2: serial@a84000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0xa84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc 89>;
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&qup_uart2_default>;
+				pinctrl-1 = <&qup_uart2_sleep>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
-		};
 
-		gcc: clock-controller@100000 {
-			compatible = "qcom,gcc-sdm845";
-			reg = <0x100000 0x1f0000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc 91>;
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&qup_i2c10_default>;
+				pinctrl-1 = <&qup_i2c10_sleep>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		tlmm: pinctrl@3400000 {
@@ -224,6 +242,45 @@ 
 			};
 		};
 
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xc440000 0x1100>,
+			      <0xc600000 0x2000000>,
+			      <0xe600000 0x100000>,
+			      <0xe700000 0xa0000>,
+			      <0xc40a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x17a00000 0x10000>,     /* GICD */
+			      <0x17a60000 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			gic-its@17a40000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0x17a40000 0x20000>;
+				status = "disabled";
+			};
+		};
+
 		timer@17c90000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -281,62 +338,5 @@ 
 				status = "disabled";
 			};
 		};
-
-		spmi_bus: spmi@c440000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0xc440000 0x1100>,
-			      <0xc600000 0x2000000>,
-			      <0xe600000 0x100000>,
-			      <0xe700000 0xa0000>,
-			      <0xc40a000 0x26000>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-			cell-index = <0>;
-		};
-
-		geniqup@ac0000 {
-			compatible = "qcom,geni-se-qup";
-			reg = <0xac0000 0x6000>;
-			clock-names = "m-ahb", "s-ahb";
-			clocks = <&gcc 105>,
-				 <&gcc 106>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			uart2: serial@a84000 {
-				compatible = "qcom,geni-debug-uart";
-				reg = <0xa84000 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc 89>;
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&qup_uart2_default>;
-				pinctrl-1 = <&qup_uart2_sleep>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			i2c10: i2c@a88000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0xa88000 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc 91>;
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&qup_i2c10_default>;
-				pinctrl-1 = <&qup_i2c10_sleep>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
 	};
 };