| Message ID | 1525748846-7767-3-git-send-email-william.wu@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Mon, May 7, 2018 at 8:07 PM, William Wu <william.wu@rock-chips.com> wrote: > If isoc split in transfer with no data (the length of DATA0 > packet is zero), we can't simply return immediately. Because > the DATA0 can be the first transaction or the second transaction > for the isoc split in transaction. If the DATA0 packet with no > data is in the first transaction, we can return immediately. > But if the DATA0 packet with no data is in the second transaction > of isoc split in transaction sequence, we need to increase the > qtd->isoc_frame_index and giveback urb to device driver if needed, > otherwise, the MDATA packet will be lost. > > A typical test case is that connect the dwc2 controller with an > usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics > headset) into the downstream port of Hub. Then use the usb mic > to record, we can find noise when playback. > > In the case, the isoc split in transaction sequence like this: > > - SSPLIT IN transaction > - CSPLIT IN transaction > - MDATA packet (176 bytes) > - CSPLIT IN transaction > - DATA0 packet (0 byte) > > This patch use both the length of DATA0 and qtd->isoc_split_offset > to check if the DATA0 is in the second transaction. > > Signed-off-by: William Wu <william.wu@rock-chips.com> > --- > Changes in v3: > - Remove "qtd->isoc_split_offset = 0" in the if test > > Changes in v2: > - Modify the commit message > > drivers/usb/dwc2/hcd_intr.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c > index ba6fd852..3003594 100644 > --- a/drivers/usb/dwc2/hcd_intr.c > +++ b/drivers/usb/dwc2/hcd_intr.c > @@ -930,9 +930,8 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, > frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; > len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd, > DWC2_HC_XFER_COMPLETE, NULL); > - if (!len) { > + if (!len && !qtd->isoc_split_offset) { > qtd->complete_split = 0; > - qtd->isoc_split_offset = 0; > return 0; > } This looks fine to me now, but as per my comments on the previous version I don't think I've dug through this problem enough to add my Reviewed-by tag. I'll assume that John or someone with more knowledge of the USB protocol than I have will Review / Ack. -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dear Doug, 在 2018年05月08日 13:13, Doug Anderson 写道: > Hi, > > On Mon, May 7, 2018 at 8:07 PM, William Wu <william.wu@rock-chips.com> wrote: >> If isoc split in transfer with no data (the length of DATA0 >> packet is zero), we can't simply return immediately. Because >> the DATA0 can be the first transaction or the second transaction >> for the isoc split in transaction. If the DATA0 packet with no >> data is in the first transaction, we can return immediately. >> But if the DATA0 packet with no data is in the second transaction >> of isoc split in transaction sequence, we need to increase the >> qtd->isoc_frame_index and giveback urb to device driver if needed, >> otherwise, the MDATA packet will be lost. >> >> A typical test case is that connect the dwc2 controller with an >> usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics >> headset) into the downstream port of Hub. Then use the usb mic >> to record, we can find noise when playback. >> >> In the case, the isoc split in transaction sequence like this: >> >> - SSPLIT IN transaction >> - CSPLIT IN transaction >> - MDATA packet (176 bytes) >> - CSPLIT IN transaction >> - DATA0 packet (0 byte) >> >> This patch use both the length of DATA0 and qtd->isoc_split_offset >> to check if the DATA0 is in the second transaction. >> >> Signed-off-by: William Wu <william.wu@rock-chips.com> >> --- >> Changes in v3: >> - Remove "qtd->isoc_split_offset = 0" in the if test >> >> Changes in v2: >> - Modify the commit message >> >> drivers/usb/dwc2/hcd_intr.c | 3 +-- >> 1 file changed, 1 insertion(+), 2 deletions(-) >> >> diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c >> index ba6fd852..3003594 100644 >> --- a/drivers/usb/dwc2/hcd_intr.c >> +++ b/drivers/usb/dwc2/hcd_intr.c >> @@ -930,9 +930,8 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, >> frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; >> len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd, >> DWC2_HC_XFER_COMPLETE, NULL); >> - if (!len) { >> + if (!len && !qtd->isoc_split_offset) { >> qtd->complete_split = 0; >> - qtd->isoc_split_offset = 0; >> return 0; >> } > This looks fine to me now, but as per my comments on the previous > version I don't think I've dug through this problem enough to add my > Reviewed-by tag. I'll assume that John or someone with more knowledge > of the USB protocol than I have will Review / Ack. Thanks very much for your review. Let's wait for other experts' suggestion. > > -Doug > > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index ba6fd852..3003594 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -930,9 +930,8 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd, DWC2_HC_XFER_COMPLETE, NULL); - if (!len) { + if (!len && !qtd->isoc_split_offset) { qtd->complete_split = 0; - qtd->isoc_split_offset = 0; return 0; }
If isoc split in transfer with no data (the length of DATA0 packet is zero), we can't simply return immediately. Because the DATA0 can be the first transaction or the second transaction for the isoc split in transaction. If the DATA0 packet with no data is in the first transaction, we can return immediately. But if the DATA0 packet with no data is in the second transaction of isoc split in transaction sequence, we need to increase the qtd->isoc_frame_index and giveback urb to device driver if needed, otherwise, the MDATA packet will be lost. A typical test case is that connect the dwc2 controller with an usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics headset) into the downstream port of Hub. Then use the usb mic to record, we can find noise when playback. In the case, the isoc split in transaction sequence like this: - SSPLIT IN transaction - CSPLIT IN transaction - MDATA packet (176 bytes) - CSPLIT IN transaction - DATA0 packet (0 byte) This patch use both the length of DATA0 and qtd->isoc_split_offset to check if the DATA0 is in the second transaction. Signed-off-by: William Wu <william.wu@rock-chips.com> --- Changes in v3: - Remove "qtd->isoc_split_offset = 0" in the if test Changes in v2: - Modify the commit message drivers/usb/dwc2/hcd_intr.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)