Message ID | 20180518151743.29937-4-Liviu.Dudau@arm.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Op 18-05-18 om 17:17 schreef Liviu Dudau: > Due to the fact that writeback connectors behave in a special way > in DRM (they always report being disconnected) we might confuse some > userspace. Add a client capability for writeback connectors that will > filter them out for clients that don't understand the capability. > > Re-requested-by: Sean Paul <seanpaul@chromium.org> > Cc: Brian Starkey <brian.starkey@arm.com> > Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> > --- > drivers/gpu/drm/drm_ioctl.c | 7 +++++++ > drivers/gpu/drm/drm_mode_config.c | 5 +++++ > include/drm/drm_file.h | 7 +++++++ > include/uapi/drm/drm.h | 9 +++++++++ > 4 files changed, 28 insertions(+) > > diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c > index af782911c505d..59951ff3e3630 100644 > --- a/drivers/gpu/drm/drm_ioctl.c > +++ b/drivers/gpu/drm/drm_ioctl.c > @@ -325,6 +325,13 @@ drm_setclientcap(struct drm_device *dev, void *data, struct drm_file *file_priv) > file_priv->atomic = req->value; > file_priv->universal_planes = req->value; > break; > + case DRM_CLIENT_CAP_WRITEBACK_CONNECTORS: > + if (!file_priv->atomic || !drm_core_check_feature(dev, DRIVER_ATOMIC)) > + return -EINVAL; Wondering how you can set the atomic cap without DRIVER_ATOMIC. :) That part could be dropped I think. We should probably WARN when trying to create a writeback connector without the DRIVER_ATOMIC cap set. > + if (req->value > 1) > + return -EINVAL; > + file_priv->writeback_connectors = req->value; > + break; > default: > return -EINVAL; > } > diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c > index e5c653357024d..21e353bd3948e 100644 > --- a/drivers/gpu/drm/drm_mode_config.c > +++ b/drivers/gpu/drm/drm_mode_config.c > @@ -145,6 +145,11 @@ int drm_mode_getresources(struct drm_device *dev, void *data, > count = 0; > connector_id = u64_to_user_ptr(card_res->connector_id_ptr); > drm_for_each_connector_iter(connector, &conn_iter) { > + /* only expose writeback connectors if userspace understands them */ > + if (!file_priv->writeback_connectors && > + (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)) > + continue; > + > if (drm_lease_held(file_priv, connector->base.id)) { > if (count < card_res->count_connectors && > put_user(connector->base.id, connector_id + count)) { > diff --git a/include/drm/drm_file.h b/include/drm/drm_file.h > index 5176c3797680c..2a09b3c8965c6 100644 > --- a/include/drm/drm_file.h > +++ b/include/drm/drm_file.h > @@ -181,6 +181,13 @@ struct drm_file { > /** @atomic: True if client understands atomic properties. */ > unsigned atomic:1; > > + /** > + * @writeback_connectors: > + * > + * True if client understands writeback connectors > + */ > + unsigned writeback_connectors:1; > + > /** > * @is_master: > * > diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h > index 6fdff5945c8a0..59f27ea928b42 100644 > --- a/include/uapi/drm/drm.h > +++ b/include/uapi/drm/drm.h > @@ -680,6 +680,15 @@ struct drm_get_cap { > */ > #define DRM_CLIENT_CAP_ATOMIC 3 > > +/** > + * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS > + * > + * If set to 1, the DRM core will expose special connectors to be used for > + * writing back to memory the scene setup in the commit. Depends on client > + * also supporting DRM_CLIENT_CAP_ATOMIC > + */ > +#define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS 4 > + > /** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ > struct drm_set_client_cap { > __u64 capability; ~Maarten
On Wed, May 23, 2018 at 11:34:32AM +0200, Maarten Lankhorst wrote: > Op 18-05-18 om 17:17 schreef Liviu Dudau: > > Due to the fact that writeback connectors behave in a special way > > in DRM (they always report being disconnected) we might confuse some > > userspace. Add a client capability for writeback connectors that will > > filter them out for clients that don't understand the capability. > > > > Re-requested-by: Sean Paul <seanpaul@chromium.org> > > Cc: Brian Starkey <brian.starkey@arm.com> > > Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> > > --- > > drivers/gpu/drm/drm_ioctl.c | 7 +++++++ > > drivers/gpu/drm/drm_mode_config.c | 5 +++++ > > include/drm/drm_file.h | 7 +++++++ > > include/uapi/drm/drm.h | 9 +++++++++ > > 4 files changed, 28 insertions(+) > > > > diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c > > index af782911c505d..59951ff3e3630 100644 > > --- a/drivers/gpu/drm/drm_ioctl.c > > +++ b/drivers/gpu/drm/drm_ioctl.c > > @@ -325,6 +325,13 @@ drm_setclientcap(struct drm_device *dev, void *data, struct drm_file *file_priv) > > file_priv->atomic = req->value; > > file_priv->universal_planes = req->value; > > break; > > + case DRM_CLIENT_CAP_WRITEBACK_CONNECTORS: > > + if (!file_priv->atomic || !drm_core_check_feature(dev, DRIVER_ATOMIC)) > > + return -EINVAL; > Wondering how you can set the atomic cap without DRIVER_ATOMIC. :) Caps can only be set one at a time. I was trying to cater for the cases where userspace can set the WRITEBACK_CONNECTORS client cap before or after setting the atomic cap. > > That part could be dropped I think. We should probably WARN when trying to create a writeback connector without the DRIVER_ATOMIC cap set. I could still keep the check for file_priv->atomic being set when accepting the DRM_CLIENT_CAP_WRITEBACK_CONNECTORS and would not need a warn. Best regards, Liviu > > + if (req->value > 1) > > + return -EINVAL; > > + file_priv->writeback_connectors = req->value; > > + break; > > default: > > return -EINVAL; > > } > > diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c > > index e5c653357024d..21e353bd3948e 100644 > > --- a/drivers/gpu/drm/drm_mode_config.c > > +++ b/drivers/gpu/drm/drm_mode_config.c > > @@ -145,6 +145,11 @@ int drm_mode_getresources(struct drm_device *dev, void *data, > > count = 0; > > connector_id = u64_to_user_ptr(card_res->connector_id_ptr); > > drm_for_each_connector_iter(connector, &conn_iter) { > > + /* only expose writeback connectors if userspace understands them */ > > + if (!file_priv->writeback_connectors && > > + (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)) > > + continue; > > + > > if (drm_lease_held(file_priv, connector->base.id)) { > > if (count < card_res->count_connectors && > > put_user(connector->base.id, connector_id + count)) { > > diff --git a/include/drm/drm_file.h b/include/drm/drm_file.h > > index 5176c3797680c..2a09b3c8965c6 100644 > > --- a/include/drm/drm_file.h > > +++ b/include/drm/drm_file.h > > @@ -181,6 +181,13 @@ struct drm_file { > > /** @atomic: True if client understands atomic properties. */ > > unsigned atomic:1; > > > > + /** > > + * @writeback_connectors: > > + * > > + * True if client understands writeback connectors > > + */ > > + unsigned writeback_connectors:1; > > + > > /** > > * @is_master: > > * > > diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h > > index 6fdff5945c8a0..59f27ea928b42 100644 > > --- a/include/uapi/drm/drm.h > > +++ b/include/uapi/drm/drm.h > > @@ -680,6 +680,15 @@ struct drm_get_cap { > > */ > > #define DRM_CLIENT_CAP_ATOMIC 3 > > > > +/** > > + * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS > > + * > > + * If set to 1, the DRM core will expose special connectors to be used for > > + * writing back to memory the scene setup in the commit. Depends on client > > + * also supporting DRM_CLIENT_CAP_ATOMIC > > + */ > > +#define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS 4 > > + > > /** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ > > struct drm_set_client_cap { > > __u64 capability; > > ~Maarten >
On Wed, May 23, 2018 at 01:27:17PM +0100, Liviu Dudau wrote: > On Wed, May 23, 2018 at 11:34:32AM +0200, Maarten Lankhorst wrote: > > Op 18-05-18 om 17:17 schreef Liviu Dudau: > > > Due to the fact that writeback connectors behave in a special way > > > in DRM (they always report being disconnected) we might confuse some > > > userspace. Add a client capability for writeback connectors that will > > > filter them out for clients that don't understand the capability. > > > > > > Re-requested-by: Sean Paul <seanpaul@chromium.org> > > > Cc: Brian Starkey <brian.starkey@arm.com> > > > Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> > > > --- > > > drivers/gpu/drm/drm_ioctl.c | 7 +++++++ > > > drivers/gpu/drm/drm_mode_config.c | 5 +++++ > > > include/drm/drm_file.h | 7 +++++++ > > > include/uapi/drm/drm.h | 9 +++++++++ > > > 4 files changed, 28 insertions(+) > > > > > > diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c > > > index af782911c505d..59951ff3e3630 100644 > > > --- a/drivers/gpu/drm/drm_ioctl.c > > > +++ b/drivers/gpu/drm/drm_ioctl.c > > > @@ -325,6 +325,13 @@ drm_setclientcap(struct drm_device *dev, void *data, struct drm_file *file_priv) > > > file_priv->atomic = req->value; > > > file_priv->universal_planes = req->value; > > > break; > > > + case DRM_CLIENT_CAP_WRITEBACK_CONNECTORS: > > > + if (!file_priv->atomic || !drm_core_check_feature(dev, DRIVER_ATOMIC)) > > > + return -EINVAL; > > Wondering how you can set the atomic cap without DRIVER_ATOMIC. :) > > Caps can only be set one at a time. I was trying to cater for the cases > where userspace can set the WRITEBACK_CONNECTORS client cap before or > after setting the atomic cap. The way we usually solve this is that if there's a dependency in caps, we set them all. E.g. atomic above also sets universal planes. I recommend we do the same for writeback. > > That part could be dropped I think. We should probably WARN when trying to create a writeback connector without the DRIVER_ATOMIC cap set. > > I could still keep the check for file_priv->atomic being set when > accepting the DRM_CLIENT_CAP_WRITEBACK_CONNECTORS and would not need a > warn. Or this. -Daniel > > Best regards, > Liviu > > > > + if (req->value > 1) > > > + return -EINVAL; > > > + file_priv->writeback_connectors = req->value; > > > + break; > > > default: > > > return -EINVAL; > > > } > > > diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c > > > index e5c653357024d..21e353bd3948e 100644 > > > --- a/drivers/gpu/drm/drm_mode_config.c > > > +++ b/drivers/gpu/drm/drm_mode_config.c > > > @@ -145,6 +145,11 @@ int drm_mode_getresources(struct drm_device *dev, void *data, > > > count = 0; > > > connector_id = u64_to_user_ptr(card_res->connector_id_ptr); > > > drm_for_each_connector_iter(connector, &conn_iter) { > > > + /* only expose writeback connectors if userspace understands them */ > > > + if (!file_priv->writeback_connectors && > > > + (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)) > > > + continue; > > > + > > > if (drm_lease_held(file_priv, connector->base.id)) { > > > if (count < card_res->count_connectors && > > > put_user(connector->base.id, connector_id + count)) { > > > diff --git a/include/drm/drm_file.h b/include/drm/drm_file.h > > > index 5176c3797680c..2a09b3c8965c6 100644 > > > --- a/include/drm/drm_file.h > > > +++ b/include/drm/drm_file.h > > > @@ -181,6 +181,13 @@ struct drm_file { > > > /** @atomic: True if client understands atomic properties. */ > > > unsigned atomic:1; > > > > > > + /** > > > + * @writeback_connectors: > > > + * > > > + * True if client understands writeback connectors > > > + */ > > > + unsigned writeback_connectors:1; > > > + > > > /** > > > * @is_master: > > > * > > > diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h > > > index 6fdff5945c8a0..59f27ea928b42 100644 > > > --- a/include/uapi/drm/drm.h > > > +++ b/include/uapi/drm/drm.h > > > @@ -680,6 +680,15 @@ struct drm_get_cap { > > > */ > > > #define DRM_CLIENT_CAP_ATOMIC 3 > > > > > > +/** > > > + * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS > > > + * > > > + * If set to 1, the DRM core will expose special connectors to be used for > > > + * writing back to memory the scene setup in the commit. Depends on client > > > + * also supporting DRM_CLIENT_CAP_ATOMIC > > > + */ > > > +#define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS 4 > > > + > > > /** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ > > > struct drm_set_client_cap { > > > __u64 capability; > > > > ~Maarten > > > > -- > ==================== > | I would like to | > | fix the world, | > | but they're not | > | giving me the | > \ source code! / > --------------- > ¯\_(ツ)_/¯ > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c index af782911c505d..59951ff3e3630 100644 --- a/drivers/gpu/drm/drm_ioctl.c +++ b/drivers/gpu/drm/drm_ioctl.c @@ -325,6 +325,13 @@ drm_setclientcap(struct drm_device *dev, void *data, struct drm_file *file_priv) file_priv->atomic = req->value; file_priv->universal_planes = req->value; break; + case DRM_CLIENT_CAP_WRITEBACK_CONNECTORS: + if (!file_priv->atomic || !drm_core_check_feature(dev, DRIVER_ATOMIC)) + return -EINVAL; + if (req->value > 1) + return -EINVAL; + file_priv->writeback_connectors = req->value; + break; default: return -EINVAL; } diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c index e5c653357024d..21e353bd3948e 100644 --- a/drivers/gpu/drm/drm_mode_config.c +++ b/drivers/gpu/drm/drm_mode_config.c @@ -145,6 +145,11 @@ int drm_mode_getresources(struct drm_device *dev, void *data, count = 0; connector_id = u64_to_user_ptr(card_res->connector_id_ptr); drm_for_each_connector_iter(connector, &conn_iter) { + /* only expose writeback connectors if userspace understands them */ + if (!file_priv->writeback_connectors && + (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)) + continue; + if (drm_lease_held(file_priv, connector->base.id)) { if (count < card_res->count_connectors && put_user(connector->base.id, connector_id + count)) { diff --git a/include/drm/drm_file.h b/include/drm/drm_file.h index 5176c3797680c..2a09b3c8965c6 100644 --- a/include/drm/drm_file.h +++ b/include/drm/drm_file.h @@ -181,6 +181,13 @@ struct drm_file { /** @atomic: True if client understands atomic properties. */ unsigned atomic:1; + /** + * @writeback_connectors: + * + * True if client understands writeback connectors + */ + unsigned writeback_connectors:1; + /** * @is_master: * diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h index 6fdff5945c8a0..59f27ea928b42 100644 --- a/include/uapi/drm/drm.h +++ b/include/uapi/drm/drm.h @@ -680,6 +680,15 @@ struct drm_get_cap { */ #define DRM_CLIENT_CAP_ATOMIC 3 +/** + * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS + * + * If set to 1, the DRM core will expose special connectors to be used for + * writing back to memory the scene setup in the commit. Depends on client + * also supporting DRM_CLIENT_CAP_ATOMIC + */ +#define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS 4 + /** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ struct drm_set_client_cap { __u64 capability;
Due to the fact that writeback connectors behave in a special way in DRM (they always report being disconnected) we might confuse some userspace. Add a client capability for writeback connectors that will filter them out for clients that don't understand the capability. Re-requested-by: Sean Paul <seanpaul@chromium.org> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> --- drivers/gpu/drm/drm_ioctl.c | 7 +++++++ drivers/gpu/drm/drm_mode_config.c | 5 +++++ include/drm/drm_file.h | 7 +++++++ include/uapi/drm/drm.h | 9 +++++++++ 4 files changed, 28 insertions(+)