diff mbox

[5/5] remoteproc: Introduce prepare and unprepare for subdevices

Message ID 20180515205345.8090-6-elder@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Alex Elder May 15, 2018, 8:53 p.m. UTC
From: Bjorn Andersson <bjorn.andersson@linaro.org>

On rare occasions a subdevice might need to prepare some hardware
resources before a remote processor is booted, and clean up some
state after it has been shut down.

One such example is the IP Accelerator found in various Qualcomm
platforms, which is accessed directly from both the modem remoteproc
and the application subsystem and requires an intricate lockstep
process when bringing the modem up and down.

[elder@linaro.org: minor description and comment edits]

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Alex Elder <elder@linaro.org>
---
 drivers/remoteproc/remoteproc_core.c | 56 ++++++++++++++++++++++++++--
 include/linux/remoteproc.h           |  4 ++
 2 files changed, 57 insertions(+), 3 deletions(-)

Comments

Arnaud POULIQUEN May 29, 2018, 9:16 a.m. UTC | #1
Hello Alex,


On 05/15/2018 10:53 PM, Alex Elder wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> On rare occasions a subdevice might need to prepare some hardware
> resources before a remote processor is booted, and clean up some
> state after it has been shut down.
> 
> One such example is the IP Accelerator found in various Qualcomm
> platforms, which is accessed directly from both the modem remoteproc
> and the application subsystem and requires an intricate lockstep
> process when bringing the modem up and down.
> 
> [elder@linaro.org: minor description and comment edits]
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Acked-by: Alex Elder <elder@linaro.org>
> ---
>  drivers/remoteproc/remoteproc_core.c | 56 ++++++++++++++++++++++++++--
>  include/linux/remoteproc.h           |  4 ++
>  2 files changed, 57 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index 2ede7ae6f5bc..283b258f5e0f 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -776,6 +776,30 @@ static int rproc_handle_resources(struct rproc *rproc,
>  	return ret;
>  }
>  
> +static int rproc_prepare_subdevices(struct rproc *rproc)
> +{
> +	struct rproc_subdev *subdev;
> +	int ret;
> +
> +	list_for_each_entry(subdev, &rproc->subdevs, node) {
> +		if (subdev->prepare) {
> +			ret = subdev->prepare(subdev);
> +			if (ret)
> +				goto unroll_preparation;
> +		}
> +	}
> +
> +	return 0;
> +
> +unroll_preparation:
> +	list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) {
> +		if (subdev->unprepare)
> +			subdev->unprepare(subdev);
> +	}
Here you could call rproc_unprepare_subdevices instead of duplicating
the code.

regards
Arnaud
> +
> +	return ret;
> +}
> +
>  static int rproc_start_subdevices(struct rproc *rproc)
>  {
>  	struct rproc_subdev *subdev;
> @@ -810,6 +834,16 @@ static void rproc_stop_subdevices(struct rproc *rproc, bool crashed)
>  	}
>  }
>  
> +static void rproc_unprepare_subdevices(struct rproc *rproc)
> +{
> +	struct rproc_subdev *subdev;
> +
> +	list_for_each_entry_reverse(subdev, &rproc->subdevs, node) {
> +		if (subdev->unprepare)
> +			subdev->unprepare(subdev);
> +	}
> +}
> +
>  /**
>   * rproc_coredump_cleanup() - clean up dump_segments list
>   * @rproc: the remote processor handle
> @@ -902,11 +936,18 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
>  		rproc->table_ptr = loaded_table;
>  	}
>  
> +	ret = rproc_prepare_subdevices(rproc);
> +	if (ret) {
> +		dev_err(dev, "failed to prepare subdevices for %s: %d\n",
> +			rproc->name, ret);
> +		return ret;
> +	}
> +
>  	/* power up the remote processor */
>  	ret = rproc->ops->start(rproc);
>  	if (ret) {
>  		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);
> -		return ret;
> +		goto unprepare_subdevices;
>  	}
>  
>  	/* Start any subdevices for the remote processor */
> @@ -914,8 +955,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
>  	if (ret) {
>  		dev_err(dev, "failed to probe subdevices for %s: %d\n",
>  			rproc->name, ret);
> -		rproc->ops->stop(rproc);
> -		return ret;
> +		goto stop_rproc;
>  	}
>  
>  	rproc->state = RPROC_RUNNING;
> @@ -923,6 +963,14 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
>  	dev_info(dev, "remote processor %s is now up\n", rproc->name);
>  
>  	return 0;
> +
> +stop_rproc:
> +	rproc->ops->stop(rproc);
> +
> +unprepare_subdevices:
> +	rproc_unprepare_subdevices(rproc);
> +
> +	return ret;
>  }
>  
>  /*
> @@ -1035,6 +1083,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
>  		return ret;
>  	}
>  
> +	rproc_unprepare_subdevices(rproc);
> +
>  	rproc->state = RPROC_OFFLINE;
>  
>  	dev_info(dev, "stopped remote processor %s\n", rproc->name);
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index 8f1426330cca..e3c5d856b6da 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -477,15 +477,19 @@ struct rproc {
>  /**
>   * struct rproc_subdev - subdevice tied to a remoteproc
>   * @node: list node related to the rproc subdevs list
> + * @prepare: prepare function, called before the rproc is started
>   * @start: start function, called after the rproc has been started
>   * @stop: stop function, called before the rproc is stopped; the @crashed
>   *	    parameter indicates if this originates from a recovery
> + * @unprepare: unprepare function, called after the rproc has been stopped
>   */
>  struct rproc_subdev {
>  	struct list_head node;
>  
> +	int (*prepare)(struct rproc_subdev *subdev);
>  	int (*start)(struct rproc_subdev *subdev);
>  	void (*stop)(struct rproc_subdev *subdev, bool crashed);
> +	void (*unprepare)(struct rproc_subdev *subdev);
>  };
>  
>  /* we currently support only two vrings per rvdev */
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Alex Elder May 29, 2018, 11:51 a.m. UTC | #2
On 05/29/2018 04:16 AM, Arnaud Pouliquen wrote:
. . .

>> +unroll_preparation:
>> +	list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) {
>> +		if (subdev->unprepare)
>> +			subdev->unprepare(subdev);
>> +	}
> Here you could call rproc_unprepare_subdevices instead of duplicating
> the code.

I thought the same thing, but it won't work because we only want to
unprepare those devices that were successfully prepared.  Here we are
unwinding the work that was partially done; in rproc_unprepare_subdevices()
*all* subdevices have their unprepare function called.

					-Alex

--
To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Arnaud POULIQUEN May 29, 2018, 12:31 p.m. UTC | #3
On 05/29/2018 01:51 PM, Alex Elder wrote:
> On 05/29/2018 04:16 AM, Arnaud Pouliquen wrote:
> . . .
> 
>>> +unroll_preparation:
>>> +	list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) {
>>> +		if (subdev->unprepare)
>>> +			subdev->unprepare(subdev);
>>> +	}
>> Here you could call rproc_unprepare_subdevices instead of duplicating
>> the code.
> 
> I thought the same thing, but it won't work because we only want to
> unprepare those devices that were successfully prepared.  Here we are
> unwinding the work that was partially done; in rproc_unprepare_subdevices()
> *all* subdevices have their unprepare function called.

You right, i missed the "continue"... new for me as i never used it,
thank for teaching!

Arnaud
--
To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Arnaud POULIQUEN May 29, 2018, 3:26 p.m. UTC | #4
Hi Fabien,
Please , could you add your "Tested-by" as you test it on ST platform?

Thanks
Arnaud

On 05/15/2018 10:53 PM, Alex Elder wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> On rare occasions a subdevice might need to prepare some hardware
> resources before a remote processor is booted, and clean up some
> state after it has been shut down.
> 
> One such example is the IP Accelerator found in various Qualcomm
> platforms, which is accessed directly from both the modem remoteproc
> and the application subsystem and requires an intricate lockstep
> process when bringing the modem up and down.
> 
> [elder@linaro.org: minor description and comment edits]
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Acked-by: Alex Elder <elder@linaro.org>
> ---
>  drivers/remoteproc/remoteproc_core.c | 56 ++++++++++++++++++++++++++--
>  include/linux/remoteproc.h           |  4 ++
>  2 files changed, 57 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index 2ede7ae6f5bc..283b258f5e0f 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -776,6 +776,30 @@ static int rproc_handle_resources(struct rproc *rproc,
>  	return ret;
>  }
>  
> +static int rproc_prepare_subdevices(struct rproc *rproc)
> +{
> +	struct rproc_subdev *subdev;
> +	int ret;
> +
> +	list_for_each_entry(subdev, &rproc->subdevs, node) {
> +		if (subdev->prepare) {
> +			ret = subdev->prepare(subdev);
> +			if (ret)
> +				goto unroll_preparation;
> +		}
> +	}
> +
> +	return 0;
> +
> +unroll_preparation:
> +	list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) {
> +		if (subdev->unprepare)
> +			subdev->unprepare(subdev);
> +	}
> +
> +	return ret;
> +}
> +
>  static int rproc_start_subdevices(struct rproc *rproc)
>  {
>  	struct rproc_subdev *subdev;
> @@ -810,6 +834,16 @@ static void rproc_stop_subdevices(struct rproc *rproc, bool crashed)
>  	}
>  }
>  
> +static void rproc_unprepare_subdevices(struct rproc *rproc)
> +{
> +	struct rproc_subdev *subdev;
> +
> +	list_for_each_entry_reverse(subdev, &rproc->subdevs, node) {
> +		if (subdev->unprepare)
> +			subdev->unprepare(subdev);
> +	}
> +}
> +
>  /**
>   * rproc_coredump_cleanup() - clean up dump_segments list
>   * @rproc: the remote processor handle
> @@ -902,11 +936,18 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
>  		rproc->table_ptr = loaded_table;
>  	}
>  
> +	ret = rproc_prepare_subdevices(rproc);
> +	if (ret) {
> +		dev_err(dev, "failed to prepare subdevices for %s: %d\n",
> +			rproc->name, ret);
> +		return ret;
> +	}
> +
>  	/* power up the remote processor */
>  	ret = rproc->ops->start(rproc);
>  	if (ret) {
>  		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);
> -		return ret;
> +		goto unprepare_subdevices;
>  	}
>  
>  	/* Start any subdevices for the remote processor */
> @@ -914,8 +955,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
>  	if (ret) {
>  		dev_err(dev, "failed to probe subdevices for %s: %d\n",
>  			rproc->name, ret);
> -		rproc->ops->stop(rproc);
> -		return ret;
> +		goto stop_rproc;
>  	}
>  
>  	rproc->state = RPROC_RUNNING;
> @@ -923,6 +963,14 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
>  	dev_info(dev, "remote processor %s is now up\n", rproc->name);
>  
>  	return 0;
> +
> +stop_rproc:
> +	rproc->ops->stop(rproc);
> +
> +unprepare_subdevices:
> +	rproc_unprepare_subdevices(rproc);
> +
> +	return ret;
>  }
>  
>  /*
> @@ -1035,6 +1083,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
>  		return ret;
>  	}
>  
> +	rproc_unprepare_subdevices(rproc);
> +
>  	rproc->state = RPROC_OFFLINE;
>  
>  	dev_info(dev, "stopped remote processor %s\n", rproc->name);
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index 8f1426330cca..e3c5d856b6da 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -477,15 +477,19 @@ struct rproc {
>  /**
>   * struct rproc_subdev - subdevice tied to a remoteproc
>   * @node: list node related to the rproc subdevs list
> + * @prepare: prepare function, called before the rproc is started
>   * @start: start function, called after the rproc has been started
>   * @stop: stop function, called before the rproc is stopped; the @crashed
>   *	    parameter indicates if this originates from a recovery
> + * @unprepare: unprepare function, called after the rproc has been stopped
>   */
>  struct rproc_subdev {
>  	struct list_head node;
>  
> +	int (*prepare)(struct rproc_subdev *subdev);
>  	int (*start)(struct rproc_subdev *subdev);
>  	void (*stop)(struct rproc_subdev *subdev, bool crashed);
> +	void (*unprepare)(struct rproc_subdev *subdev);
>  };
>  
>  /* we currently support only two vrings per rvdev */
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Fabien DESSENNE May 29, 2018, 3:30 p.m. UTC | #5
Hi,

Adding my 'Tested-by'.

BR,

Fabien


On 29/05/18 17:26, Arnaud Pouliquen wrote:
> Hi Fabien,

> Please , could you add your "Tested-by" as you test it on ST platform?

>

> Thanks

> Arnaud

>

> On 05/15/2018 10:53 PM, Alex Elder wrote:

>> From: Bjorn Andersson <bjorn.andersson@linaro.org>

>>

>> On rare occasions a subdevice might need to prepare some hardware

>> resources before a remote processor is booted, and clean up some

>> state after it has been shut down.

>>

>> One such example is the IP Accelerator found in various Qualcomm

>> platforms, which is accessed directly from both the modem remoteproc

>> and the application subsystem and requires an intricate lockstep

>> process when bringing the modem up and down.

>>

>> [elder@linaro.org: minor description and comment edits]

>>

>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

>> Acked-by: Alex Elder <elder@linaro.org>


Tested-by: Fabien Dessenne <fabien.dessenne@st.com>


>> ---

>>   drivers/remoteproc/remoteproc_core.c | 56 ++++++++++++++++++++++++++--

>>   include/linux/remoteproc.h           |  4 ++

>>   2 files changed, 57 insertions(+), 3 deletions(-)

>>

>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c

>> index 2ede7ae6f5bc..283b258f5e0f 100644

>> --- a/drivers/remoteproc/remoteproc_core.c

>> +++ b/drivers/remoteproc/remoteproc_core.c

>> @@ -776,6 +776,30 @@ static int rproc_handle_resources(struct rproc *rproc,

>>   	return ret;

>>   }

>>   

>> +static int rproc_prepare_subdevices(struct rproc *rproc)

>> +{

>> +	struct rproc_subdev *subdev;

>> +	int ret;

>> +

>> +	list_for_each_entry(subdev, &rproc->subdevs, node) {

>> +		if (subdev->prepare) {

>> +			ret = subdev->prepare(subdev);

>> +			if (ret)

>> +				goto unroll_preparation;

>> +		}

>> +	}

>> +

>> +	return 0;

>> +

>> +unroll_preparation:

>> +	list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) {

>> +		if (subdev->unprepare)

>> +			subdev->unprepare(subdev);

>> +	}

>> +

>> +	return ret;

>> +}

>> +

>>   static int rproc_start_subdevices(struct rproc *rproc)

>>   {

>>   	struct rproc_subdev *subdev;

>> @@ -810,6 +834,16 @@ static void rproc_stop_subdevices(struct rproc *rproc, bool crashed)

>>   	}

>>   }

>>   

>> +static void rproc_unprepare_subdevices(struct rproc *rproc)

>> +{

>> +	struct rproc_subdev *subdev;

>> +

>> +	list_for_each_entry_reverse(subdev, &rproc->subdevs, node) {

>> +		if (subdev->unprepare)

>> +			subdev->unprepare(subdev);

>> +	}

>> +}

>> +

>>   /**

>>    * rproc_coredump_cleanup() - clean up dump_segments list

>>    * @rproc: the remote processor handle

>> @@ -902,11 +936,18 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)

>>   		rproc->table_ptr = loaded_table;

>>   	}

>>   

>> +	ret = rproc_prepare_subdevices(rproc);

>> +	if (ret) {

>> +		dev_err(dev, "failed to prepare subdevices for %s: %d\n",

>> +			rproc->name, ret);

>> +		return ret;

>> +	}

>> +

>>   	/* power up the remote processor */

>>   	ret = rproc->ops->start(rproc);

>>   	if (ret) {

>>   		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);

>> -		return ret;

>> +		goto unprepare_subdevices;

>>   	}

>>   

>>   	/* Start any subdevices for the remote processor */

>> @@ -914,8 +955,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)

>>   	if (ret) {

>>   		dev_err(dev, "failed to probe subdevices for %s: %d\n",

>>   			rproc->name, ret);

>> -		rproc->ops->stop(rproc);

>> -		return ret;

>> +		goto stop_rproc;

>>   	}

>>   

>>   	rproc->state = RPROC_RUNNING;

>> @@ -923,6 +963,14 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)

>>   	dev_info(dev, "remote processor %s is now up\n", rproc->name);

>>   

>>   	return 0;

>> +

>> +stop_rproc:

>> +	rproc->ops->stop(rproc);

>> +

>> +unprepare_subdevices:

>> +	rproc_unprepare_subdevices(rproc);

>> +

>> +	return ret;

>>   }

>>   

>>   /*

>> @@ -1035,6 +1083,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed)

>>   		return ret;

>>   	}

>>   

>> +	rproc_unprepare_subdevices(rproc);

>> +

>>   	rproc->state = RPROC_OFFLINE;

>>   

>>   	dev_info(dev, "stopped remote processor %s\n", rproc->name);

>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h

>> index 8f1426330cca..e3c5d856b6da 100644

>> --- a/include/linux/remoteproc.h

>> +++ b/include/linux/remoteproc.h

>> @@ -477,15 +477,19 @@ struct rproc {

>>   /**

>>    * struct rproc_subdev - subdevice tied to a remoteproc

>>    * @node: list node related to the rproc subdevs list

>> + * @prepare: prepare function, called before the rproc is started

>>    * @start: start function, called after the rproc has been started

>>    * @stop: stop function, called before the rproc is stopped; the @crashed

>>    *	    parameter indicates if this originates from a recovery

>> + * @unprepare: unprepare function, called after the rproc has been stopped

>>    */

>>   struct rproc_subdev {

>>   	struct list_head node;

>>   

>> +	int (*prepare)(struct rproc_subdev *subdev);

>>   	int (*start)(struct rproc_subdev *subdev);

>>   	void (*stop)(struct rproc_subdev *subdev, bool crashed);

>> +	void (*unprepare)(struct rproc_subdev *subdev);

>>   };

>>   

>>   /* we currently support only two vrings per rvdev */

>>
Alex Elder May 29, 2018, 3:31 p.m. UTC | #6
On 05/29/2018 10:30 AM, Fabien DESSENNE wrote:
> Hi,
> 
> Adding my 'Tested-by'.

Normally you would say:

    Tested-by: Fabien DESSENNE <fabien.dessenne@st.com>

The reason it might be important is you might wish to indicate the
name and/or e-mail as something different from what you're now
sending from.

Is what I wrote above the way you would like it to appear?

I will add that line to every one of my patches when I update them.

Thanks.

					-Alex
> 
> BR,
> 
> Fabien
> 
> 
> On 29/05/18 17:26, Arnaud Pouliquen wrote:
>> Hi Fabien,
>> Please , could you add your "Tested-by" as you test it on ST platform?
>>
>> Thanks
>> Arnaud
>>
>> On 05/15/2018 10:53 PM, Alex Elder wrote:
>>> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>>>
>>> On rare occasions a subdevice might need to prepare some hardware
>>> resources before a remote processor is booted, and clean up some
>>> state after it has been shut down.
>>>
>>> One such example is the IP Accelerator found in various Qualcomm
>>> platforms, which is accessed directly from both the modem remoteproc
>>> and the application subsystem and requires an intricate lockstep
>>> process when bringing the modem up and down.
>>>
>>> [elder@linaro.org: minor description and comment edits]
>>>
>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>>> Acked-by: Alex Elder <elder@linaro.org>
> 
> Tested-by: Fabien Dessenne <fabien.dessenne@st.com>
> 
>>> ---
>>>   drivers/remoteproc/remoteproc_core.c | 56 ++++++++++++++++++++++++++--
>>>   include/linux/remoteproc.h           |  4 ++
>>>   2 files changed, 57 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
>>> index 2ede7ae6f5bc..283b258f5e0f 100644
>>> --- a/drivers/remoteproc/remoteproc_core.c
>>> +++ b/drivers/remoteproc/remoteproc_core.c
>>> @@ -776,6 +776,30 @@ static int rproc_handle_resources(struct rproc *rproc,
>>>   	return ret;
>>>   }
>>>   
>>> +static int rproc_prepare_subdevices(struct rproc *rproc)
>>> +{
>>> +	struct rproc_subdev *subdev;
>>> +	int ret;
>>> +
>>> +	list_for_each_entry(subdev, &rproc->subdevs, node) {
>>> +		if (subdev->prepare) {
>>> +			ret = subdev->prepare(subdev);
>>> +			if (ret)
>>> +				goto unroll_preparation;
>>> +		}
>>> +	}
>>> +
>>> +	return 0;
>>> +
>>> +unroll_preparation:
>>> +	list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) {
>>> +		if (subdev->unprepare)
>>> +			subdev->unprepare(subdev);
>>> +	}
>>> +
>>> +	return ret;
>>> +}
>>> +
>>>   static int rproc_start_subdevices(struct rproc *rproc)
>>>   {
>>>   	struct rproc_subdev *subdev;
>>> @@ -810,6 +834,16 @@ static void rproc_stop_subdevices(struct rproc *rproc, bool crashed)
>>>   	}
>>>   }
>>>   
>>> +static void rproc_unprepare_subdevices(struct rproc *rproc)
>>> +{
>>> +	struct rproc_subdev *subdev;
>>> +
>>> +	list_for_each_entry_reverse(subdev, &rproc->subdevs, node) {
>>> +		if (subdev->unprepare)
>>> +			subdev->unprepare(subdev);
>>> +	}
>>> +}
>>> +
>>>   /**
>>>    * rproc_coredump_cleanup() - clean up dump_segments list
>>>    * @rproc: the remote processor handle
>>> @@ -902,11 +936,18 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
>>>   		rproc->table_ptr = loaded_table;
>>>   	}
>>>   
>>> +	ret = rproc_prepare_subdevices(rproc);
>>> +	if (ret) {
>>> +		dev_err(dev, "failed to prepare subdevices for %s: %d\n",
>>> +			rproc->name, ret);
>>> +		return ret;
>>> +	}
>>> +
>>>   	/* power up the remote processor */
>>>   	ret = rproc->ops->start(rproc);
>>>   	if (ret) {
>>>   		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);
>>> -		return ret;
>>> +		goto unprepare_subdevices;
>>>   	}
>>>   
>>>   	/* Start any subdevices for the remote processor */
>>> @@ -914,8 +955,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
>>>   	if (ret) {
>>>   		dev_err(dev, "failed to probe subdevices for %s: %d\n",
>>>   			rproc->name, ret);
>>> -		rproc->ops->stop(rproc);
>>> -		return ret;
>>> +		goto stop_rproc;
>>>   	}
>>>   
>>>   	rproc->state = RPROC_RUNNING;
>>> @@ -923,6 +963,14 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
>>>   	dev_info(dev, "remote processor %s is now up\n", rproc->name);
>>>   
>>>   	return 0;
>>> +
>>> +stop_rproc:
>>> +	rproc->ops->stop(rproc);
>>> +
>>> +unprepare_subdevices:
>>> +	rproc_unprepare_subdevices(rproc);
>>> +
>>> +	return ret;
>>>   }
>>>   
>>>   /*
>>> @@ -1035,6 +1083,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
>>>   		return ret;
>>>   	}
>>>   
>>> +	rproc_unprepare_subdevices(rproc);
>>> +
>>>   	rproc->state = RPROC_OFFLINE;
>>>   
>>>   	dev_info(dev, "stopped remote processor %s\n", rproc->name);
>>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>>> index 8f1426330cca..e3c5d856b6da 100644
>>> --- a/include/linux/remoteproc.h
>>> +++ b/include/linux/remoteproc.h
>>> @@ -477,15 +477,19 @@ struct rproc {
>>>   /**
>>>    * struct rproc_subdev - subdevice tied to a remoteproc
>>>    * @node: list node related to the rproc subdevs list
>>> + * @prepare: prepare function, called before the rproc is started
>>>    * @start: start function, called after the rproc has been started
>>>    * @stop: stop function, called before the rproc is stopped; the @crashed
>>>    *	    parameter indicates if this originates from a recovery
>>> + * @unprepare: unprepare function, called after the rproc has been stopped
>>>    */
>>>   struct rproc_subdev {
>>>   	struct list_head node;
>>>   
>>> +	int (*prepare)(struct rproc_subdev *subdev);
>>>   	int (*start)(struct rproc_subdev *subdev);
>>>   	void (*stop)(struct rproc_subdev *subdev, bool crashed);
>>> +	void (*unprepare)(struct rproc_subdev *subdev);
>>>   };
>>>   
>>>   /* we currently support only two vrings per rvdev */
>>>

--
To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Fabien DESSENNE May 29, 2018, 3:44 p.m. UTC | #7
Hi Alex,


That's the correct syntax (I wrote it with the official form a few lines 
later (after the Signed-off-by / Acked-by)).

You can add it to the full patch set (although I tested only the core 
part + the future ST driver part)

BR


Fabien



On 29/05/18 17:31, Alex Elder wrote:
> On 05/29/2018 10:30 AM, Fabien DESSENNE wrote:

>> Hi,

>>

>> Adding my 'Tested-by'.

> Normally you would say:

>

>      Tested-by: Fabien DESSENNE <fabien.dessenne@st.com>

>

> The reason it might be important is you might wish to indicate the

> name and/or e-mail as something different from what you're now

> sending from.

>

> Is what I wrote above the way you would like it to appear?

>

> I will add that line to every one of my patches when I update them.

>

> Thanks.

>

> 					-Alex

>> BR,

>>

>> Fabien

>>

>>

>> On 29/05/18 17:26, Arnaud Pouliquen wrote:

>>> Hi Fabien,

>>> Please , could you add your "Tested-by" as you test it on ST platform?

>>>

>>> Thanks

>>> Arnaud

>>>

>>> On 05/15/2018 10:53 PM, Alex Elder wrote:

>>>> From: Bjorn Andersson <bjorn.andersson@linaro.org>

>>>>

>>>> On rare occasions a subdevice might need to prepare some hardware

>>>> resources before a remote processor is booted, and clean up some

>>>> state after it has been shut down.

>>>>

>>>> One such example is the IP Accelerator found in various Qualcomm

>>>> platforms, which is accessed directly from both the modem remoteproc

>>>> and the application subsystem and requires an intricate lockstep

>>>> process when bringing the modem up and down.

>>>>

>>>> [elder@linaro.org: minor description and comment edits]

>>>>

>>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

>>>> Acked-by: Alex Elder <elder@linaro.org>

>> Tested-by: Fabien Dessenne <fabien.dessenne@st.com>

>>

>>>> ---

>>>>    drivers/remoteproc/remoteproc_core.c | 56 ++++++++++++++++++++++++++--

>>>>    include/linux/remoteproc.h           |  4 ++

>>>>    2 files changed, 57 insertions(+), 3 deletions(-)

>>>>

>>>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c

>>>> index 2ede7ae6f5bc..283b258f5e0f 100644

>>>> --- a/drivers/remoteproc/remoteproc_core.c

>>>> +++ b/drivers/remoteproc/remoteproc_core.c

>>>> @@ -776,6 +776,30 @@ static int rproc_handle_resources(struct rproc *rproc,

>>>>    	return ret;

>>>>    }

>>>>    

>>>> +static int rproc_prepare_subdevices(struct rproc *rproc)

>>>> +{

>>>> +	struct rproc_subdev *subdev;

>>>> +	int ret;

>>>> +

>>>> +	list_for_each_entry(subdev, &rproc->subdevs, node) {

>>>> +		if (subdev->prepare) {

>>>> +			ret = subdev->prepare(subdev);

>>>> +			if (ret)

>>>> +				goto unroll_preparation;

>>>> +		}

>>>> +	}

>>>> +

>>>> +	return 0;

>>>> +

>>>> +unroll_preparation:

>>>> +	list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) {

>>>> +		if (subdev->unprepare)

>>>> +			subdev->unprepare(subdev);

>>>> +	}

>>>> +

>>>> +	return ret;

>>>> +}

>>>> +

>>>>    static int rproc_start_subdevices(struct rproc *rproc)

>>>>    {

>>>>    	struct rproc_subdev *subdev;

>>>> @@ -810,6 +834,16 @@ static void rproc_stop_subdevices(struct rproc *rproc, bool crashed)

>>>>    	}

>>>>    }

>>>>    

>>>> +static void rproc_unprepare_subdevices(struct rproc *rproc)

>>>> +{

>>>> +	struct rproc_subdev *subdev;

>>>> +

>>>> +	list_for_each_entry_reverse(subdev, &rproc->subdevs, node) {

>>>> +		if (subdev->unprepare)

>>>> +			subdev->unprepare(subdev);

>>>> +	}

>>>> +}

>>>> +

>>>>    /**

>>>>     * rproc_coredump_cleanup() - clean up dump_segments list

>>>>     * @rproc: the remote processor handle

>>>> @@ -902,11 +936,18 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)

>>>>    		rproc->table_ptr = loaded_table;

>>>>    	}

>>>>    

>>>> +	ret = rproc_prepare_subdevices(rproc);

>>>> +	if (ret) {

>>>> +		dev_err(dev, "failed to prepare subdevices for %s: %d\n",

>>>> +			rproc->name, ret);

>>>> +		return ret;

>>>> +	}

>>>> +

>>>>    	/* power up the remote processor */

>>>>    	ret = rproc->ops->start(rproc);

>>>>    	if (ret) {

>>>>    		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);

>>>> -		return ret;

>>>> +		goto unprepare_subdevices;

>>>>    	}

>>>>    

>>>>    	/* Start any subdevices for the remote processor */

>>>> @@ -914,8 +955,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)

>>>>    	if (ret) {

>>>>    		dev_err(dev, "failed to probe subdevices for %s: %d\n",

>>>>    			rproc->name, ret);

>>>> -		rproc->ops->stop(rproc);

>>>> -		return ret;

>>>> +		goto stop_rproc;

>>>>    	}

>>>>    

>>>>    	rproc->state = RPROC_RUNNING;

>>>> @@ -923,6 +963,14 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)

>>>>    	dev_info(dev, "remote processor %s is now up\n", rproc->name);

>>>>    

>>>>    	return 0;

>>>> +

>>>> +stop_rproc:

>>>> +	rproc->ops->stop(rproc);

>>>> +

>>>> +unprepare_subdevices:

>>>> +	rproc_unprepare_subdevices(rproc);

>>>> +

>>>> +	return ret;

>>>>    }

>>>>    

>>>>    /*

>>>> @@ -1035,6 +1083,8 @@ static int rproc_stop(struct rproc *rproc, bool crashed)

>>>>    		return ret;

>>>>    	}

>>>>    

>>>> +	rproc_unprepare_subdevices(rproc);

>>>> +

>>>>    	rproc->state = RPROC_OFFLINE;

>>>>    

>>>>    	dev_info(dev, "stopped remote processor %s\n", rproc->name);

>>>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h

>>>> index 8f1426330cca..e3c5d856b6da 100644

>>>> --- a/include/linux/remoteproc.h

>>>> +++ b/include/linux/remoteproc.h

>>>> @@ -477,15 +477,19 @@ struct rproc {

>>>>    /**

>>>>     * struct rproc_subdev - subdevice tied to a remoteproc

>>>>     * @node: list node related to the rproc subdevs list

>>>> + * @prepare: prepare function, called before the rproc is started

>>>>     * @start: start function, called after the rproc has been started

>>>>     * @stop: stop function, called before the rproc is stopped; the @crashed

>>>>     *	    parameter indicates if this originates from a recovery

>>>> + * @unprepare: unprepare function, called after the rproc has been stopped

>>>>     */

>>>>    struct rproc_subdev {

>>>>    	struct list_head node;

>>>>    

>>>> +	int (*prepare)(struct rproc_subdev *subdev);

>>>>    	int (*start)(struct rproc_subdev *subdev);

>>>>    	void (*stop)(struct rproc_subdev *subdev, bool crashed);

>>>> +	void (*unprepare)(struct rproc_subdev *subdev);

>>>>    };

>>>>    

>>>>    /* we currently support only two vrings per rvdev */

>>>>
diff mbox

Patch

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 2ede7ae6f5bc..283b258f5e0f 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -776,6 +776,30 @@  static int rproc_handle_resources(struct rproc *rproc,
 	return ret;
 }
 
+static int rproc_prepare_subdevices(struct rproc *rproc)
+{
+	struct rproc_subdev *subdev;
+	int ret;
+
+	list_for_each_entry(subdev, &rproc->subdevs, node) {
+		if (subdev->prepare) {
+			ret = subdev->prepare(subdev);
+			if (ret)
+				goto unroll_preparation;
+		}
+	}
+
+	return 0;
+
+unroll_preparation:
+	list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) {
+		if (subdev->unprepare)
+			subdev->unprepare(subdev);
+	}
+
+	return ret;
+}
+
 static int rproc_start_subdevices(struct rproc *rproc)
 {
 	struct rproc_subdev *subdev;
@@ -810,6 +834,16 @@  static void rproc_stop_subdevices(struct rproc *rproc, bool crashed)
 	}
 }
 
+static void rproc_unprepare_subdevices(struct rproc *rproc)
+{
+	struct rproc_subdev *subdev;
+
+	list_for_each_entry_reverse(subdev, &rproc->subdevs, node) {
+		if (subdev->unprepare)
+			subdev->unprepare(subdev);
+	}
+}
+
 /**
  * rproc_coredump_cleanup() - clean up dump_segments list
  * @rproc: the remote processor handle
@@ -902,11 +936,18 @@  static int rproc_start(struct rproc *rproc, const struct firmware *fw)
 		rproc->table_ptr = loaded_table;
 	}
 
+	ret = rproc_prepare_subdevices(rproc);
+	if (ret) {
+		dev_err(dev, "failed to prepare subdevices for %s: %d\n",
+			rproc->name, ret);
+		return ret;
+	}
+
 	/* power up the remote processor */
 	ret = rproc->ops->start(rproc);
 	if (ret) {
 		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);
-		return ret;
+		goto unprepare_subdevices;
 	}
 
 	/* Start any subdevices for the remote processor */
@@ -914,8 +955,7 @@  static int rproc_start(struct rproc *rproc, const struct firmware *fw)
 	if (ret) {
 		dev_err(dev, "failed to probe subdevices for %s: %d\n",
 			rproc->name, ret);
-		rproc->ops->stop(rproc);
-		return ret;
+		goto stop_rproc;
 	}
 
 	rproc->state = RPROC_RUNNING;
@@ -923,6 +963,14 @@  static int rproc_start(struct rproc *rproc, const struct firmware *fw)
 	dev_info(dev, "remote processor %s is now up\n", rproc->name);
 
 	return 0;
+
+stop_rproc:
+	rproc->ops->stop(rproc);
+
+unprepare_subdevices:
+	rproc_unprepare_subdevices(rproc);
+
+	return ret;
 }
 
 /*
@@ -1035,6 +1083,8 @@  static int rproc_stop(struct rproc *rproc, bool crashed)
 		return ret;
 	}
 
+	rproc_unprepare_subdevices(rproc);
+
 	rproc->state = RPROC_OFFLINE;
 
 	dev_info(dev, "stopped remote processor %s\n", rproc->name);
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 8f1426330cca..e3c5d856b6da 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -477,15 +477,19 @@  struct rproc {
 /**
  * struct rproc_subdev - subdevice tied to a remoteproc
  * @node: list node related to the rproc subdevs list
+ * @prepare: prepare function, called before the rproc is started
  * @start: start function, called after the rproc has been started
  * @stop: stop function, called before the rproc is stopped; the @crashed
  *	    parameter indicates if this originates from a recovery
+ * @unprepare: unprepare function, called after the rproc has been stopped
  */
 struct rproc_subdev {
 	struct list_head node;
 
+	int (*prepare)(struct rproc_subdev *subdev);
 	int (*start)(struct rproc_subdev *subdev);
 	void (*stop)(struct rproc_subdev *subdev, bool crashed);
+	void (*unprepare)(struct rproc_subdev *subdev);
 };
 
 /* we currently support only two vrings per rvdev */