| Message ID | 20180529150455.17300-4-peron.clem@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Tue, May 29, 2018 at 12:04 PM, Clément Péron <peron.clem@gmail.com> wrote: > From: Clément Peron <clement.peron@devialet.com> > > Add devicetree binding document for NXP's i.MX SoC specific > EPIT timer driver. > > Signed-off-by: Clément Peron <clement.peron@devialet.com> > --- > .../devicetree/bindings/clock/imx6q,epit.txt | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx6q,epit.txt > > diff --git a/Documentation/devicetree/bindings/clock/imx6q,epit.txt b/Documentation/devicetree/bindings/clock/imx6q,epit.txt > new file mode 100644 > index 000000000000..d54d455cebdc > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx6q,epit.txt > @@ -0,0 +1,25 @@ > +Binding for the i.MX6 EPIT timer > + > +This binding uses the common clock binding[1]. > + > +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt > + > +Required properties: > +- compatible: should be "fsl,imx6q-epit" > +- reg: physical base address of the controller and length of memory mapped > + region. > +- interrupts: Should contain EPIT controller interrupt > +- clocks: list of clock specifiers, must contain an entry for each required > + entry in clock-names > +- clock-names : as described in the clock bindings Please list the name of each required clock here. I see that the driver does not request a "ckil" clock. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, May 29, 2018 at 10:04 AM, Clément Péron <peron.clem@gmail.com> wrote: > From: Clément Peron <clement.peron@devialet.com> > > Add devicetree binding document for NXP's i.MX SoC specific > EPIT timer driver. > > Signed-off-by: Clément Peron <clement.peron@devialet.com> > --- > .../devicetree/bindings/clock/imx6q,epit.txt | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx6q,epit.txt Please send DT bindings to the correct list. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/imx6q,epit.txt b/Documentation/devicetree/bindings/clock/imx6q,epit.txt new file mode 100644 index 000000000000..d54d455cebdc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6q,epit.txt @@ -0,0 +1,25 @@ +Binding for the i.MX6 EPIT timer + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: should be "fsl,imx6q-epit" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: Should contain EPIT controller interrupt +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names : as described in the clock bindings + +Example: + epit1: epit@20d0000 { + compatible = "fsl,imx6q-epit"; + reg = <0x020d0000 0x4000>; + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_EPIT1>, + <&clks IMX6QDL_CLK_IPG_PER>, + <&clks IMX6QDL_CLK_CKIL>; + clock-names = "ipg", "per", "ckil"; + };