| Message ID | 20180604100035.19558-3-peron.clem@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Jun 04, 2018 at 12:00:33PM +0200, Clément Péron wrote: > From: Clément Peron <clement.peron@devialet.com> > > Add devicetree binding document for NXP's i.MX SoC specific > EPIT timer driver. > > Signed-off-by: Clément Peron <clement.peron@devialet.com> > --- > .../devicetree/bindings/timer/fsl,imxepit.txt | 21 +++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxepit.txt > > diff --git a/Documentation/devicetree/bindings/timer/fsl,imxepit.txt b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt > new file mode 100644 > index 000000000000..de2e6ef68d24 > --- /dev/null > +++ b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt > @@ -0,0 +1,21 @@ > +Binding for the i.MX Enhanced Periodic Interrupt Timer (EPIT) > + > +The Enhanced Periodic Interrupt Timer (EPIT) is a 32-bit set-and-forget timer > +that is capable of providing precise interrupts at regular intervals with > +minimal processor intervention. > + > +Required properties: > +- compatible: should be "fsl,<chip>-epit", "fsl,imx31-epit" where <chip> is > + imx25, imx6qdl, imx6sl, imx6sul or imx6sx. > +- reg: physical base address of the controller and length of memory mapped > + region. > +- interrupts: Should contain EPIT controller interrupt > +- clocks : The clock provided by the SoC to drive the timer. > + > +Example for i.MX6QDL: > + epit1: epit@20d0000 { I think I already mentioned this, but: timer@... > + compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit"; > + reg = <0x020d0000 0x4000>; > + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks IMX6QDL_CLK_EPIT1>; > + }; > -- > 2.17.0 >
Hi Rob, On Tue, 5 Jun 2018 at 17:23, Rob Herring <robh@kernel.org> wrote: > > On Mon, Jun 04, 2018 at 12:00:33PM +0200, Clément Péron wrote: > > From: Clément Peron <clement.peron@devialet.com> > > > > Add devicetree binding document for NXP's i.MX SoC specific > > EPIT timer driver. > > > > Signed-off-by: Clément Peron <clement.peron@devialet.com> > > --- > > .../devicetree/bindings/timer/fsl,imxepit.txt | 21 +++++++++++++++++++ > > 1 file changed, 21 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxepit.txt > > > > diff --git a/Documentation/devicetree/bindings/timer/fsl,imxepit.txt b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt > > new file mode 100644 > > index 000000000000..de2e6ef68d24 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt > > @@ -0,0 +1,21 @@ > > +Binding for the i.MX Enhanced Periodic Interrupt Timer (EPIT) > > + > > +The Enhanced Periodic Interrupt Timer (EPIT) is a 32-bit set-and-forget timer > > +that is capable of providing precise interrupts at regular intervals with > > +minimal processor intervention. > > + > > +Required properties: > > +- compatible: should be "fsl,<chip>-epit", "fsl,imx31-epit" where <chip> is > > + imx25, imx6qdl, imx6sl, imx6sul or imx6sx. > > +- reg: physical base address of the controller and length of memory mapped > > + region. > > +- interrupts: Should contain EPIT controller interrupt > > +- clocks : The clock provided by the SoC to drive the timer. > > + > > +Example for i.MX6QDL: > > + epit1: epit@20d0000 { > > I think I already mentioned this, but: My bad, will update it > > timer@... > > > + compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit"; > > + reg = <0x020d0000 0x4000>; > > + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clks IMX6QDL_CLK_EPIT1>; > > + }; > > -- > > 2.17.0 > >
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxepit.txt b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt new file mode 100644 index 000000000000..de2e6ef68d24 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt @@ -0,0 +1,21 @@ +Binding for the i.MX Enhanced Periodic Interrupt Timer (EPIT) + +The Enhanced Periodic Interrupt Timer (EPIT) is a 32-bit set-and-forget timer +that is capable of providing precise interrupts at regular intervals with +minimal processor intervention. + +Required properties: +- compatible: should be "fsl,<chip>-epit", "fsl,imx31-epit" where <chip> is + imx25, imx6qdl, imx6sl, imx6sul or imx6sx. +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: Should contain EPIT controller interrupt +- clocks : The clock provided by the SoC to drive the timer. + +Example for i.MX6QDL: + epit1: epit@20d0000 { + compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit"; + reg = <0x020d0000 0x4000>; + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_EPIT1>; + };