diff mbox

[v4,14/14] coresight: allow the coresight core driver to be built as a module

Message ID 20180605210710.22227-15-kim.phillips@arm.com (mailing list archive)
State New, archived
Headers show

Commit Message

Kim Phillips June 5, 2018, 9:07 p.m. UTC
Allow to build coresight as a module.  This enhances
coresight developer efficiency by allowing the development to
take place exclusively on the target, and without needing to
reboot in between changes.

- Kconfig becomes a tristate, to allow =m
- append -core to source file name to allow module to
  be called coresight by the Makefile
- modules can have only one init/exit, so we add the core bus
  register/unregister function calls to the etm_perf init/exit
  functions, since coresight.c does not have etm_pmu defined.
- add a MODULE_DEVICE_TABLE for autoloading on boot

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
---
 drivers/hwtracing/coresight/Kconfig             |  5 ++++-
 drivers/hwtracing/coresight/Makefile            |  7 +++++--
 .../coresight/{coresight.c => coresight-core.c} |  6 ------
 .../hwtracing/coresight/coresight-etm-perf.c    | 17 ++++++++++++++++-
 4 files changed, 25 insertions(+), 10 deletions(-)
 rename drivers/hwtracing/coresight/{coresight.c => coresight-core.c} (99%)

Comments

Greg Kroah-Hartman June 6, 2018, 8:33 a.m. UTC | #1
On Tue, Jun 05, 2018 at 04:07:10PM -0500, Kim Phillips wrote:
> Allow to build coresight as a module.  This enhances
> coresight developer efficiency by allowing the development to
> take place exclusively on the target, and without needing to
> reboot in between changes.
> 
> - Kconfig becomes a tristate, to allow =m
> - append -core to source file name to allow module to
>   be called coresight by the Makefile
> - modules can have only one init/exit, so we add the core bus
>   register/unregister function calls to the etm_perf init/exit
>   functions, since coresight.c does not have etm_pmu defined.
> - add a MODULE_DEVICE_TABLE for autoloading on boot
> 
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Leo Yan <leo.yan@linaro.org>
> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
> Cc: Randy Dunlap <rdunlap@infradead.org>
> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Russell King <linux@armlinux.org.uk>
> Signed-off-by: Kim Phillips <kim.phillips@arm.com>
> ---
>  drivers/hwtracing/coresight/Kconfig             |  5 ++++-
>  drivers/hwtracing/coresight/Makefile            |  7 +++++--
>  .../coresight/{coresight.c => coresight-core.c} |  6 ------
>  .../hwtracing/coresight/coresight-etm-perf.c    | 17 ++++++++++++++++-
>  4 files changed, 25 insertions(+), 10 deletions(-)
>  rename drivers/hwtracing/coresight/{coresight.c => coresight-core.c} (99%)
> 
> diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
> index 181a44ea2d61..c05b265f7731 100644
> --- a/drivers/hwtracing/coresight/Kconfig
> +++ b/drivers/hwtracing/coresight/Kconfig
> @@ -2,7 +2,7 @@
>  # Coresight configuration
>  #
>  menuconfig CORESIGHT
> -	bool "CoreSight Tracing Support"
> +	tristate "CoreSight Tracing Support"
>  	select ARM_AMBA
>  	select PERF_EVENTS
>  	help
> @@ -12,6 +12,9 @@ menuconfig CORESIGHT
>  	  specification and configure the right series of components when a
>  	  trace source gets enabled.
>  
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called coresight.
> +
>  if CORESIGHT
>  config CORESIGHT_LINKS_AND_SINKS
>  	tristate "CoreSight Link and Sink drivers"
> diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
> index 45d7a0f34170..ed2d4bcb017b 100644
> --- a/drivers/hwtracing/coresight/Makefile
> +++ b/drivers/hwtracing/coresight/Makefile
> @@ -2,8 +2,11 @@
>  #
>  # Makefile for CoreSight drivers.
>  #
> -obj-$(CONFIG_CORESIGHT) += coresight.o coresight-etm-perf.o
> -obj-$(CONFIG_OF) += of_coresight.o
> +obj-$(CONFIG_CORESIGHT) += coresight.o
> +coresight-objs := coresight-core.o  coresight-etm-perf.o

Shouldn't this line be:
	coresight-y := coresight-core.o  coresight-etm-perf.o

> +ifeq ($(CONFIG_OF), y)
> +coresight-objs += of_coresight.o
> +endif

Those 3 lines should be written as 1 line:
	coresight-$(CONFIG_OF) += of_coresight.o

thanks,

greg k-h
Suzuki K Poulose June 6, 2018, 9:57 a.m. UTC | #2
On 06/05/2018 10:07 PM, Kim Phillips wrote:
> Allow to build coresight as a module.  This enhances
> coresight developer efficiency by allowing the development to
> take place exclusively on the target, and without needing to
> reboot in between changes.
> 
> - Kconfig becomes a tristate, to allow =m
> - append -core to source file name to allow module to
>    be called coresight by the Makefile
> - modules can have only one init/exit, so we add the core bus
>    register/unregister function calls to the etm_perf init/exit
>    functions, since coresight.c does not have etm_pmu defined.

It feels a bit weird to move the coresight core specific steps to
etm_perf_init. Why not call etm_perf_init from coresight init routine
and keep everything core specific in the coresight-core.c ?


Suzuki
Mathieu Poirier June 7, 2018, 9:46 p.m. UTC | #3
On 5 June 2018 at 15:07, Kim Phillips <kim.phillips@arm.com> wrote:
> Allow to build coresight as a module.  This enhances
> coresight developer efficiency by allowing the development to
> take place exclusively on the target, and without needing to
> reboot in between changes.
>
> - Kconfig becomes a tristate, to allow =m
> - append -core to source file name to allow module to
>   be called coresight by the Makefile
> - modules can have only one init/exit, so we add the core bus
>   register/unregister function calls to the etm_perf init/exit
>   functions, since coresight.c does not have etm_pmu defined.
> - add a MODULE_DEVICE_TABLE for autoloading on boot
>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Leo Yan <leo.yan@linaro.org>
> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
> Cc: Randy Dunlap <rdunlap@infradead.org>
> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Russell King <linux@armlinux.org.uk>
> Signed-off-by: Kim Phillips <kim.phillips@arm.com>
> ---
>  drivers/hwtracing/coresight/Kconfig             |  5 ++++-
>  drivers/hwtracing/coresight/Makefile            |  7 +++++--
>  .../coresight/{coresight.c => coresight-core.c} |  6 ------
>  .../hwtracing/coresight/coresight-etm-perf.c    | 17 ++++++++++++++++-
>  4 files changed, 25 insertions(+), 10 deletions(-)
>  rename drivers/hwtracing/coresight/{coresight.c => coresight-core.c} (99%)
>
> diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
> index 181a44ea2d61..c05b265f7731 100644
> --- a/drivers/hwtracing/coresight/Kconfig
> +++ b/drivers/hwtracing/coresight/Kconfig
> @@ -2,7 +2,7 @@
>  # Coresight configuration
>  #
>  menuconfig CORESIGHT
> -       bool "CoreSight Tracing Support"
> +       tristate "CoreSight Tracing Support"
>         select ARM_AMBA
>         select PERF_EVENTS
>         help
> @@ -12,6 +12,9 @@ menuconfig CORESIGHT
>           specification and configure the right series of components when a
>           trace source gets enabled.
>
> +         To compile this driver as a module, choose M here: the
> +         module will be called coresight.
> +
>  if CORESIGHT
>  config CORESIGHT_LINKS_AND_SINKS
>         tristate "CoreSight Link and Sink drivers"
> diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
> index 45d7a0f34170..ed2d4bcb017b 100644
> --- a/drivers/hwtracing/coresight/Makefile
> +++ b/drivers/hwtracing/coresight/Makefile
> @@ -2,8 +2,11 @@
>  #
>  # Makefile for CoreSight drivers.
>  #
> -obj-$(CONFIG_CORESIGHT) += coresight.o coresight-etm-perf.o
> -obj-$(CONFIG_OF) += of_coresight.o
> +obj-$(CONFIG_CORESIGHT) += coresight.o
> +coresight-objs := coresight-core.o  coresight-etm-perf.o
> +ifeq ($(CONFIG_OF), y)
> +coresight-objs += of_coresight.o
> +endif
>  obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o
>  coresight-tmc-objs := coresight-tmc-core.o coresight-tmc-etf.o \
>                       coresight-tmc-etr.o
> diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight-core.c
> similarity index 99%
> rename from drivers/hwtracing/coresight/coresight.c
> rename to drivers/hwtracing/coresight/coresight-core.c
> index 1c941351f1d1..f96258de1e9b 100644
> --- a/drivers/hwtracing/coresight/coresight.c
> +++ b/drivers/hwtracing/coresight/coresight-core.c
> @@ -948,12 +948,6 @@ struct bus_type coresight_bustype = {
>         .name   = "coresight",
>  };
>
> -static int __init coresight_init(void)
> -{
> -       return bus_register(&coresight_bustype);
> -}
> -postcore_initcall(coresight_init);
> -
>  struct coresight_device *coresight_register(struct coresight_desc *desc)
>  {
>         int i;
> diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
> index 0fe7e43ea1c4..ceac9aee4a82 100644
> --- a/drivers/hwtracing/coresight/coresight-etm-perf.c
> +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
> @@ -472,6 +472,10 @@ static int __init etm_perf_init(void)
>  {
>         int ret;
>
> +       ret = bus_register(&coresight_bustype);
> +       if (ret)
> +               return ret;
> +
>         etm_pmu.capabilities            = PERF_PMU_CAP_EXCLUSIVE;
>
>         etm_pmu.attr_groups             = etm_pmu_attr_groups;
> @@ -494,4 +498,15 @@ static int __init etm_perf_init(void)
>
>         return ret;
>  }
> -device_initcall(etm_perf_init);
> +postcore_initcall(etm_perf_init);
> +
> +static void __exit etm_perf_exit(void)
> +{
> +       perf_pmu_unregister(&etm_pmu);
> +       bus_unregister(&coresight_bustype);
> +}
> +module_exit(etm_perf_exit);

I see the perf functionality as an accessory to the core rather than
the other way around.  Initialisation in the core code should be
driving the PMU registration.

> +
> +MODULE_AUTHOR("Mathieu Poirier <mathieu.poirier@linaro.org>");
> +MODULE_DESCRIPTION("Arm CoreSight tracer driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.17.0
>
diff mbox

Patch

diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
index 181a44ea2d61..c05b265f7731 100644
--- a/drivers/hwtracing/coresight/Kconfig
+++ b/drivers/hwtracing/coresight/Kconfig
@@ -2,7 +2,7 @@ 
 # Coresight configuration
 #
 menuconfig CORESIGHT
-	bool "CoreSight Tracing Support"
+	tristate "CoreSight Tracing Support"
 	select ARM_AMBA
 	select PERF_EVENTS
 	help
@@ -12,6 +12,9 @@  menuconfig CORESIGHT
 	  specification and configure the right series of components when a
 	  trace source gets enabled.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called coresight.
+
 if CORESIGHT
 config CORESIGHT_LINKS_AND_SINKS
 	tristate "CoreSight Link and Sink drivers"
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
index 45d7a0f34170..ed2d4bcb017b 100644
--- a/drivers/hwtracing/coresight/Makefile
+++ b/drivers/hwtracing/coresight/Makefile
@@ -2,8 +2,11 @@ 
 #
 # Makefile for CoreSight drivers.
 #
-obj-$(CONFIG_CORESIGHT) += coresight.o coresight-etm-perf.o
-obj-$(CONFIG_OF) += of_coresight.o
+obj-$(CONFIG_CORESIGHT) += coresight.o
+coresight-objs := coresight-core.o  coresight-etm-perf.o
+ifeq ($(CONFIG_OF), y)
+coresight-objs += of_coresight.o
+endif
 obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o
 coresight-tmc-objs := coresight-tmc-core.o coresight-tmc-etf.o \
 		      coresight-tmc-etr.o
diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight-core.c
similarity index 99%
rename from drivers/hwtracing/coresight/coresight.c
rename to drivers/hwtracing/coresight/coresight-core.c
index 1c941351f1d1..f96258de1e9b 100644
--- a/drivers/hwtracing/coresight/coresight.c
+++ b/drivers/hwtracing/coresight/coresight-core.c
@@ -948,12 +948,6 @@  struct bus_type coresight_bustype = {
 	.name	= "coresight",
 };
 
-static int __init coresight_init(void)
-{
-	return bus_register(&coresight_bustype);
-}
-postcore_initcall(coresight_init);
-
 struct coresight_device *coresight_register(struct coresight_desc *desc)
 {
 	int i;
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 0fe7e43ea1c4..ceac9aee4a82 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -472,6 +472,10 @@  static int __init etm_perf_init(void)
 {
 	int ret;
 
+	ret = bus_register(&coresight_bustype);
+	if (ret)
+		return ret;
+
 	etm_pmu.capabilities		= PERF_PMU_CAP_EXCLUSIVE;
 
 	etm_pmu.attr_groups		= etm_pmu_attr_groups;
@@ -494,4 +498,15 @@  static int __init etm_perf_init(void)
 
 	return ret;
 }
-device_initcall(etm_perf_init);
+postcore_initcall(etm_perf_init);
+
+static void __exit etm_perf_exit(void)
+{
+	perf_pmu_unregister(&etm_pmu);
+	bus_unregister(&coresight_bustype);
+}
+module_exit(etm_perf_exit);
+
+MODULE_AUTHOR("Mathieu Poirier <mathieu.poirier@linaro.org>");
+MODULE_DESCRIPTION("Arm CoreSight tracer driver");
+MODULE_LICENSE("GPL v2");