@@ -682,6 +682,15 @@ config REGULATOR_QCOM_RPM
Qualcomm RPM as a module. The module will be named
"qcom_rpm-regulator".
+config REGULATOR_QCOM_RPMH
+ tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
+ depends on QCOM_RPMH || COMPILE_TEST
+ help
+ This driver supports control of PMIC regulators via the RPMh hardware
+ block found on Qualcomm Technologies Inc. SoCs. RPMh regulator
+ control allows for voting on regulator state between multiple
+ processors within the SoC.
+
config REGULATOR_QCOM_SMD_RPM
tristate "Qualcomm SMD based RPM regulator driver"
depends on QCOM_SMD_RPM
@@ -78,6 +78,7 @@ obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
new file mode 100644
@@ -0,0 +1,753 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/rpmh.h>
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/**
+ * enum rpmh_regulator_type - supported RPMh accelerator types
+ * %VRM: RPMh VRM accelerator which supports voting on enable, voltage,
+ * and mode of LDO, SMPS, and BOB type PMIC regulators.
+ * %XOB: RPMh XOB accelerator which supports voting on the enable state
+ * of PMIC regulators.
+ */
+enum rpmh_regulator_type {
+ VRM,
+ XOB,
+};
+
+#define RPMH_REGULATOR_REG_VRM_VOLTAGE 0x0
+#define RPMH_REGULATOR_REG_ENABLE 0x4
+#define RPMH_REGULATOR_REG_VRM_MODE 0x8
+
+#define RPMH_REGULATOR_MODE_COUNT 4
+
+#define PMIC4_LDO_MODE_RETENTION 4
+#define PMIC4_LDO_MODE_LPM 5
+#define PMIC4_LDO_MODE_HPM 7
+
+#define PMIC4_SMPS_MODE_RETENTION 4
+#define PMIC4_SMPS_MODE_PFM 5
+#define PMIC4_SMPS_MODE_AUTO 6
+#define PMIC4_SMPS_MODE_PWM 7
+
+#define PMIC4_BOB_MODE_PASS 0
+#define PMIC4_BOB_MODE_PFM 1
+#define PMIC4_BOB_MODE_AUTO 2
+#define PMIC4_BOB_MODE_PWM 3
+
+/**
+ * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations
+ * @regulator_type: RPMh accelerator type used to manage this
+ * regulator
+ * @ops: Pointer to regulator ops callback structure
+ * @voltage_range: The single range of voltages supported by this
+ * PMIC regulator type
+ * @n_voltages: The number of unique voltage set points defined
+ * by voltage_range
+ * @hpm_min_load_uA: Minimum load current in microamps that requires
+ * high power mode (HPM) operation. This is used
+ * for LDO hardware type regulators only.
+ * @pmic_mode_map: Array indexed by regulator framework mode
+ * containing PMIC hardware modes. Must be large
+ * enough to index all framework modes supported
+ * by this regulator hardware type.
+ * @of_map_mode: Maps an RPMH_REGULATOR_MODE_* mode value defined
+ * in device tree to a regulator framework mode
+ */
+struct rpmh_vreg_hw_data {
+ enum rpmh_regulator_type regulator_type;
+ const struct regulator_ops *ops;
+ const struct regulator_linear_range voltage_range;
+ int n_voltages;
+ int hpm_min_load_uA;
+ const int *pmic_mode_map;
+ unsigned int (*of_map_mode)(unsigned int mode);
+};
+
+/**
+ * struct rpmh_vreg - individual RPMh regulator data structure encapsulating a
+ * single regulator device
+ * @dev: Device pointer for the top-level PMIC RPMh
+ * regulator parent device. This is used as a
+ * handle in RPMh write requests.
+ * @addr: Base address of the regulator resource within
+ * an RPMh accelerator
+ * @rdesc: Regulator descriptor
+ * @hw_data: PMIC regulator configuration data for this RPMh
+ * regulator
+ * @always_wait_for_ack: Boolean flag indicating if a request must always
+ * wait for an ACK from RPMh before continuing even
+ * if it corresponds to a strictly lower power
+ * state (e.g. enabled --> disabled).
+ * @enabled: Flag indicating if the regulator is enabled or
+ * not
+ * @bypassed: Boolean indicating if the regulator is in
+ * bypass (pass-through) mode or not. This is
+ * only used by BOB rpmh-regulator resources.
+ * @voltage_selector: Selector used for get_voltage_sel() and
+ * set_voltage_sel() callbacks
+ * @mode: RPMh VRM regulator current framework mode
+ */
+struct rpmh_vreg {
+ struct device *dev;
+ u32 addr;
+ struct regulator_desc rdesc;
+ const struct rpmh_vreg_hw_data *hw_data;
+ bool always_wait_for_ack;
+
+ int enabled;
+ bool bypassed;
+ int voltage_selector;
+ unsigned int mode;
+};
+
+/**
+ * struct rpmh_vreg_init_data - initialization data for an RPMh regulator
+ * @name: Name for the regulator which also corresponds
+ * to the device tree subnode name of the regulator
+ * @resource_name: RPMh regulator resource name format string.
+ * This must include exactly one field: '%s' which
+ * is filled at run-time with the PMIC ID provided
+ * by device tree property qcom,pmic-id. Example:
+ * "ldo%s1" for RPMh resource "ldoa1".
+ * @supply_name: Parent supply regulator name
+ * @hw_data: Configuration data for this PMIC regulator type
+ */
+struct rpmh_vreg_init_data {
+ const char *name;
+ const char *resource_name;
+ const char *supply_name;
+ const struct rpmh_vreg_hw_data *hw_data;
+};
+
+/**
+ * rpmh_regulator_send_request() - send the request to RPMh
+ * @vreg: Pointer to the RPMh regulator
+ * @cmd: Pointer to the RPMh command to send
+ * @wait_for_ack: Boolean indicating if execution must wait until the
+ * request has been acknowledged as complete
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_send_request(struct rpmh_vreg *vreg,
+ struct tcs_cmd *cmd, bool wait_for_ack)
+{
+ int ret;
+
+ if (wait_for_ack || vreg->always_wait_for_ack)
+ ret = rpmh_write(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd, 1);
+ else
+ ret = rpmh_write_async(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd,
+ 1);
+
+ return ret;
+}
+
+static int _rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int selector, bool wait_for_ack)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+ struct tcs_cmd cmd = {
+ .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_VOLTAGE,
+ };
+ int ret;
+
+ /* VRM voltage control register is set with voltage in millivolts. */
+ cmd.data = DIV_ROUND_UP(regulator_list_voltage_linear_range(rdev,
+ selector), 1000);
+
+ ret = rpmh_regulator_send_request(vreg, &cmd, wait_for_ack);
+ if (!ret)
+ vreg->voltage_selector = selector;
+
+ return ret;
+}
+
+static int rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+ if (vreg->enabled == -EINVAL) {
+ /*
+ * Cache the voltage and send it later when the regulator is
+ * enabled or disabled.
+ */
+ vreg->voltage_selector = selector;
+ return 0;
+ }
+
+ return _rpmh_regulator_vrm_set_voltage_sel(rdev, selector,
+ selector > vreg->voltage_selector);
+}
+
+static int rpmh_regulator_vrm_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->voltage_selector;
+}
+
+static int rpmh_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->enabled;
+}
+
+static int rpmh_regulator_set_enable_state(struct regulator_dev *rdev,
+ bool enable)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+ struct tcs_cmd cmd = {
+ .addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
+ .data = enable,
+ };
+ int ret;
+
+ if (vreg->enabled == -EINVAL &&
+ vreg->voltage_selector != -ENOTRECOVERABLE) {
+ ret = _rpmh_regulator_vrm_set_voltage_sel(rdev,
+ vreg->voltage_selector, true);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = rpmh_regulator_send_request(vreg, &cmd, enable);
+ if (!ret)
+ vreg->enabled = enable;
+
+ return ret;
+}
+
+static int rpmh_regulator_enable(struct regulator_dev *rdev)
+{
+ return rpmh_regulator_set_enable_state(rdev, true);
+}
+
+static int rpmh_regulator_disable(struct regulator_dev *rdev)
+{
+ return rpmh_regulator_set_enable_state(rdev, false);
+}
+
+static int rpmh_regulator_vrm_set_mode_bypass(struct rpmh_vreg *vreg,
+ unsigned int mode, bool bypassed)
+{
+ struct tcs_cmd cmd = {
+ .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_MODE,
+ };
+ int pmic_mode;
+
+ if (mode > REGULATOR_MODE_STANDBY)
+ return -EINVAL;
+
+ pmic_mode = vreg->hw_data->pmic_mode_map[mode];
+ if (pmic_mode < 0)
+ return pmic_mode;
+
+ cmd.data = bypassed ? PMIC4_BOB_MODE_PASS : pmic_mode;
+
+ return rpmh_regulator_send_request(vreg, &cmd, true);
+}
+
+static int rpmh_regulator_vrm_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+ int ret;
+
+ if (mode == vreg->mode)
+ return 0;
+
+ ret = rpmh_regulator_vrm_set_mode_bypass(vreg, mode, vreg->bypassed);
+ if (!ret)
+ vreg->mode = mode;
+
+ return ret;
+}
+
+static unsigned int rpmh_regulator_vrm_get_mode(struct regulator_dev *rdev)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->mode;
+}
+
+/**
+ * rpmh_regulator_vrm_set_load() - set the regulator mode based upon the load
+ * current requested
+ * @rdev: Regulator device pointer for the rpmh-regulator
+ * @load_uA: Aggregated load current in microamps
+ *
+ * This function is used in the regulator_ops for VRM type RPMh regulator
+ * devices.
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_vrm_set_load(struct regulator_dev *rdev, int load_uA)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+ unsigned int mode;
+
+ if (load_uA >= vreg->hw_data->hpm_min_load_uA)
+ mode = REGULATOR_MODE_FAST;
+ else
+ mode = REGULATOR_MODE_IDLE;
+
+ return rpmh_regulator_vrm_set_mode(rdev, mode);
+}
+
+static int rpmh_regulator_vrm_set_bypass(struct regulator_dev *rdev,
+ bool enable)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+ int ret;
+
+ if (vreg->bypassed == enable)
+ return 0;
+
+ ret = rpmh_regulator_vrm_set_mode_bypass(vreg, vreg->mode, enable);
+ if (!ret)
+ vreg->bypassed = enable;
+
+ return ret;
+}
+
+static int rpmh_regulator_vrm_get_bypass(struct regulator_dev *rdev,
+ bool *enable)
+{
+ struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+ *enable = vreg->bypassed;
+
+ return 0;
+}
+
+static const struct regulator_ops rpmh_regulator_vrm_ops = {
+ .enable = rpmh_regulator_enable,
+ .disable = rpmh_regulator_disable,
+ .is_enabled = rpmh_regulator_is_enabled,
+ .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel,
+ .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_mode = rpmh_regulator_vrm_set_mode,
+ .get_mode = rpmh_regulator_vrm_get_mode,
+};
+
+static const struct regulator_ops rpmh_regulator_vrm_drms_ops = {
+ .enable = rpmh_regulator_enable,
+ .disable = rpmh_regulator_disable,
+ .is_enabled = rpmh_regulator_is_enabled,
+ .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel,
+ .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_mode = rpmh_regulator_vrm_set_mode,
+ .get_mode = rpmh_regulator_vrm_get_mode,
+ .set_load = rpmh_regulator_vrm_set_load,
+};
+
+static const struct regulator_ops rpmh_regulator_vrm_bypass_ops = {
+ .enable = rpmh_regulator_enable,
+ .disable = rpmh_regulator_disable,
+ .is_enabled = rpmh_regulator_is_enabled,
+ .set_voltage_sel = rpmh_regulator_vrm_set_voltage_sel,
+ .get_voltage_sel = rpmh_regulator_vrm_get_voltage_sel,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_mode = rpmh_regulator_vrm_set_mode,
+ .get_mode = rpmh_regulator_vrm_get_mode,
+ .set_bypass = rpmh_regulator_vrm_set_bypass,
+ .get_bypass = rpmh_regulator_vrm_get_bypass,
+};
+
+static const struct regulator_ops rpmh_regulator_xob_ops = {
+ .enable = rpmh_regulator_enable,
+ .disable = rpmh_regulator_disable,
+ .is_enabled = rpmh_regulator_is_enabled,
+};
+
+/**
+ * rpmh_regulator_init_vreg() - initialize all attributes of an rpmh-regulator
+ * vreg: Pointer to the individual rpmh-regulator resource
+ * dev: Pointer to the top level rpmh-regulator PMIC device
+ * node: Pointer to the individual rpmh-regulator resource
+ * device node
+ * pmic_id: String used to identify the top level rpmh-regulator
+ * PMIC device on the board
+ * pmic_rpmh_data: Pointer to a null-terminated array of rpmh-regulator
+ * resources defined for the top level PMIC device
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_init_vreg(struct rpmh_vreg *vreg, struct device *dev,
+ struct device_node *node, const char *pmic_id,
+ const struct rpmh_vreg_init_data *pmic_rpmh_data)
+{
+ struct regulator_config reg_config = {};
+ char rpmh_resource_name[20] = "";
+ const struct rpmh_vreg_init_data *rpmh_data;
+ struct regulator_init_data *init_data;
+ struct regulator_dev *rdev;
+ int ret;
+
+ vreg->dev = dev;
+
+ for (rpmh_data = pmic_rpmh_data; rpmh_data->name; rpmh_data++)
+ if (!strcmp(rpmh_data->name, node->name))
+ break;
+
+ if (!rpmh_data->name) {
+ dev_err(dev, "Unknown regulator %s\n", node->name);
+ return -EINVAL;
+ }
+
+ scnprintf(rpmh_resource_name, sizeof(rpmh_resource_name),
+ rpmh_data->resource_name, pmic_id);
+
+ vreg->addr = cmd_db_read_addr(rpmh_resource_name);
+ if (!vreg->addr) {
+ dev_err(dev, "%s: could not find RPMh address for resource %s\n",
+ node->name, rpmh_resource_name);
+ return -ENODEV;
+ }
+
+ vreg->rdesc.name = rpmh_data->name;
+ vreg->rdesc.supply_name = rpmh_data->supply_name;
+ vreg->hw_data = rpmh_data->hw_data;
+
+ vreg->enabled = -EINVAL;
+ vreg->voltage_selector = -ENOTRECOVERABLE;
+ vreg->mode = REGULATOR_MODE_INVALID;
+
+ if (rpmh_data->hw_data->n_voltages) {
+ vreg->rdesc.linear_ranges = &rpmh_data->hw_data->voltage_range;
+ vreg->rdesc.n_linear_ranges = 1;
+ vreg->rdesc.n_voltages = rpmh_data->hw_data->n_voltages;
+ }
+
+ vreg->always_wait_for_ack = of_property_read_bool(node,
+ "qcom,always-wait-for-ack");
+
+ vreg->rdesc.owner = THIS_MODULE;
+ vreg->rdesc.type = REGULATOR_VOLTAGE;
+ vreg->rdesc.ops = vreg->hw_data->ops;
+ vreg->rdesc.of_map_mode = vreg->hw_data->of_map_mode;
+
+ init_data = of_get_regulator_init_data(dev, node, &vreg->rdesc);
+ if (!init_data)
+ return -ENOMEM;
+
+ if (rpmh_data->hw_data->regulator_type == XOB &&
+ init_data->constraints.min_uV &&
+ init_data->constraints.min_uV == init_data->constraints.max_uV) {
+ vreg->rdesc.fixed_uV = init_data->constraints.min_uV;
+ vreg->rdesc.n_voltages = 1;
+ }
+
+ reg_config.dev = dev;
+ reg_config.init_data = init_data;
+ reg_config.of_node = node;
+ reg_config.driver_data = vreg;
+
+ rdev = devm_regulator_register(dev, &vreg->rdesc, ®_config);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(dev, "%s: devm_regulator_register() failed, ret=%d\n",
+ node->name, ret);
+ return ret;
+ }
+
+ dev_dbg(dev, "%s regulator registered for RPMh resource %s @ 0x%05X\n",
+ node->name, rpmh_resource_name, vreg->addr);
+
+ return 0;
+}
+
+static const int pmic_mode_map_pmic4_ldo[REGULATOR_MODE_STANDBY + 1] = {
+ [REGULATOR_MODE_INVALID] = -EINVAL,
+ [REGULATOR_MODE_STANDBY] = PMIC4_LDO_MODE_RETENTION,
+ [REGULATOR_MODE_IDLE] = PMIC4_LDO_MODE_LPM,
+ [REGULATOR_MODE_NORMAL] = -EINVAL,
+ [REGULATOR_MODE_FAST] = PMIC4_LDO_MODE_HPM,
+};
+
+static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int mode)
+{
+ static const unsigned int of_mode_map[RPMH_REGULATOR_MODE_COUNT] = {
+ [RPMH_REGULATOR_MODE_RET] = REGULATOR_MODE_STANDBY,
+ [RPMH_REGULATOR_MODE_LPM] = REGULATOR_MODE_IDLE,
+ [RPMH_REGULATOR_MODE_AUTO] = REGULATOR_MODE_INVALID,
+ [RPMH_REGULATOR_MODE_HPM] = REGULATOR_MODE_FAST,
+ };
+
+ if (mode >= RPMH_REGULATOR_MODE_COUNT)
+ return -EINVAL;
+
+ return of_mode_map[mode];
+}
+
+static const int pmic_mode_map_pmic4_smps[REGULATOR_MODE_STANDBY + 1] = {
+ [REGULATOR_MODE_INVALID] = -EINVAL,
+ [REGULATOR_MODE_STANDBY] = PMIC4_SMPS_MODE_RETENTION,
+ [REGULATOR_MODE_IDLE] = PMIC4_SMPS_MODE_PFM,
+ [REGULATOR_MODE_NORMAL] = PMIC4_SMPS_MODE_AUTO,
+ [REGULATOR_MODE_FAST] = PMIC4_SMPS_MODE_PWM,
+};
+
+static unsigned int rpmh_regulator_pmic4_smps_of_map_mode(unsigned int mode)
+{
+ static const unsigned int of_mode_map[RPMH_REGULATOR_MODE_COUNT] = {
+ [RPMH_REGULATOR_MODE_RET] = REGULATOR_MODE_STANDBY,
+ [RPMH_REGULATOR_MODE_LPM] = REGULATOR_MODE_IDLE,
+ [RPMH_REGULATOR_MODE_AUTO] = REGULATOR_MODE_NORMAL,
+ [RPMH_REGULATOR_MODE_HPM] = REGULATOR_MODE_FAST,
+ };
+
+ if (mode >= RPMH_REGULATOR_MODE_COUNT)
+ return -EINVAL;
+
+ return of_mode_map[mode];
+}
+
+static const int pmic_mode_map_pmic4_bob[REGULATOR_MODE_STANDBY + 1] = {
+ [REGULATOR_MODE_INVALID] = -EINVAL,
+ [REGULATOR_MODE_STANDBY] = -EINVAL,
+ [REGULATOR_MODE_IDLE] = PMIC4_BOB_MODE_PFM,
+ [REGULATOR_MODE_NORMAL] = PMIC4_BOB_MODE_AUTO,
+ [REGULATOR_MODE_FAST] = PMIC4_BOB_MODE_PWM,
+};
+
+static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int mode)
+{
+ static const unsigned int of_mode_map[RPMH_REGULATOR_MODE_COUNT] = {
+ [RPMH_REGULATOR_MODE_RET] = REGULATOR_MODE_INVALID,
+ [RPMH_REGULATOR_MODE_LPM] = REGULATOR_MODE_IDLE,
+ [RPMH_REGULATOR_MODE_AUTO] = REGULATOR_MODE_NORMAL,
+ [RPMH_REGULATOR_MODE_HPM] = REGULATOR_MODE_FAST,
+ };
+
+ if (mode >= RPMH_REGULATOR_MODE_COUNT)
+ return -EINVAL;
+
+ return of_mode_map[mode];
+}
+
+static const struct rpmh_vreg_hw_data pmic4_pldo = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000),
+ .n_voltages = 256,
+ .hpm_min_load_uA = 10000,
+ .pmic_mode_map = pmic_mode_map_pmic4_ldo,
+ .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_pldo_lv = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000),
+ .n_voltages = 128,
+ .hpm_min_load_uA = 10000,
+ .pmic_mode_map = pmic_mode_map_pmic4_ldo,
+ .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_nldo = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
+ .n_voltages = 128,
+ .hpm_min_load_uA = 30000,
+ .pmic_mode_map = pmic_mode_map_pmic4_ldo,
+ .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_hfsmps3 = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
+ .n_voltages = 216,
+ .pmic_mode_map = pmic_mode_map_pmic4_smps,
+ .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_ftsmps426 = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000),
+ .n_voltages = 259,
+ .pmic_mode_map = pmic_mode_map_pmic4_smps,
+ .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_bob = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_bypass_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000),
+ .n_voltages = 84,
+ .pmic_mode_map = pmic_mode_map_pmic4_bob,
+ .of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_lvs = {
+ .regulator_type = XOB,
+ .ops = &rpmh_regulator_xob_ops,
+ /* LVS hardware does not support voltage or mode configuration. */
+};
+
+#define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \
+{ \
+ .name = _name, \
+ .resource_name = _resource_name, \
+ .hw_data = _hw_data, \
+ .supply_name = _supply_name, \
+}
+
+static const struct rpmh_vreg_init_data pm8998_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic4_ftsmps426, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic4_hfsmps3, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic4_hfsmps3, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic4_hfsmps3, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic4_ftsmps426, "vdd-s6"),
+ RPMH_VREG("smps7", "smp%s7", &pmic4_ftsmps426, "vdd-s7"),
+ RPMH_VREG("smps8", "smp%s8", &pmic4_ftsmps426, "vdd-s8"),
+ RPMH_VREG("smps9", "smp%s9", &pmic4_ftsmps426, "vdd-s9"),
+ RPMH_VREG("smps10", "smp%s10", &pmic4_ftsmps426, "vdd-s10"),
+ RPMH_VREG("smps11", "smp%s11", &pmic4_ftsmps426, "vdd-s11"),
+ RPMH_VREG("smps12", "smp%s12", &pmic4_ftsmps426, "vdd-s12"),
+ RPMH_VREG("smps13", "smp%s13", &pmic4_ftsmps426, "vdd-s13"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic4_nldo, "vdd-l1-l27"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic4_nldo, "vdd-l2-l8-l17"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic4_nldo, "vdd-l3-l11"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic4_nldo, "vdd-l4-l5"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic4_nldo, "vdd-l4-l5"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic4_pldo, "vdd-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic4_nldo, "vdd-l2-l8-l17"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic4_pldo, "vdd-l9"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic4_pldo, "vdd-l10-l23-l25"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic4_nldo, "vdd-l3-l11"),
+ RPMH_VREG("ldo12", "ldo%s12", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo13", "ldo%s13", &pmic4_pldo, "vdd-l13-l19-l21"),
+ RPMH_VREG("ldo14", "ldo%s14", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic4_pldo_lv, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo16", "ldo%s16", &pmic4_pldo, "vdd-l16-l28"),
+ RPMH_VREG("ldo17", "ldo%s17", &pmic4_nldo, "vdd-l2-l8-l17"),
+ RPMH_VREG("ldo18", "ldo%s18", &pmic4_pldo, "vdd-l18-l22"),
+ RPMH_VREG("ldo19", "ldo%s19", &pmic4_pldo, "vdd-l13-l19-l21"),
+ RPMH_VREG("ldo20", "ldo%s20", &pmic4_pldo, "vdd-l20-l24"),
+ RPMH_VREG("ldo21", "ldo%s21", &pmic4_pldo, "vdd-l13-l19-l21"),
+ RPMH_VREG("ldo22", "ldo%s22", &pmic4_pldo, "vdd-l18-l22"),
+ RPMH_VREG("ldo23", "ldo%s23", &pmic4_pldo, "vdd-l10-l23-l25"),
+ RPMH_VREG("ldo24", "ldo%s24", &pmic4_pldo, "vdd-l20-l24"),
+ RPMH_VREG("ldo25", "ldo%s25", &pmic4_pldo, "vdd-l10-l23-l25"),
+ RPMH_VREG("ldo26", "ldo%s26", &pmic4_nldo, "vdd-l26"),
+ RPMH_VREG("ldo27", "ldo%s27", &pmic4_nldo, "vdd-l1-l27"),
+ RPMH_VREG("ldo28", "ldo%s28", &pmic4_pldo, "vdd-l16-l28"),
+ RPMH_VREG("lvs1", "vs%s1", &pmic4_lvs, "vin-lvs-1-2"),
+ RPMH_VREG("lvs2", "vs%s2", &pmic4_lvs, "vin-lvs-1-2"),
+ {},
+};
+
+static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = {
+ RPMH_VREG("bob", "bob%s1", &pmic4_bob, "vdd-bob"),
+ {},
+};
+
+static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic4_ftsmps426, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic4_ftsmps426, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic4_ftsmps426, "vdd-s4"),
+ {},
+};
+
+static int rpmh_regulator_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct rpmh_vreg_init_data *vreg_data;
+ struct device_node *node;
+ struct rpmh_vreg *vreg;
+ const char *pmic_id;
+ int ret;
+
+ ret = cmd_db_ready();
+ if (ret < 0) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Command DB not available, ret=%d\n", ret);
+ return ret;
+ }
+
+ vreg_data = of_device_get_match_data(dev);
+ if (!vreg_data)
+ return -ENODEV;
+
+ ret = of_property_read_string(dev->of_node, "qcom,pmic-id", &pmic_id);
+ if (ret < 0) {
+ dev_err(dev, "qcom,pmic-id missing in DT node\n");
+ return ret;
+ }
+
+ for_each_available_child_of_node(dev->of_node, node) {
+ vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ of_node_put(node);
+ return -ENOMEM;
+ }
+
+ ret = rpmh_regulator_init_vreg(vreg, dev, node, pmic_id,
+ vreg_data);
+ if (ret < 0) {
+ of_node_put(node);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id rpmh_regulator_match_table[] = {
+ {
+ .compatible = "qcom,pm8998-rpmh-regulators",
+ .data = pm8998_vreg_data,
+ },
+ {
+ .compatible = "qcom,pmi8998-rpmh-regulators",
+ .data = pmi8998_vreg_data,
+ },
+ {
+ .compatible = "qcom,pm8005-rpmh-regulators",
+ .data = pm8005_vreg_data,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
+
+static struct platform_driver rpmh_regulator_driver = {
+ .driver = {
+ .name = "qcom-rpmh-regulator",
+ .of_match_table = of_match_ptr(rpmh_regulator_match_table),
+ },
+ .probe = rpmh_regulator_probe,
+};
+module_platform_driver(rpmh_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm RPMh regulator driver");
+MODULE_LICENSE("GPL v2");