| Message ID | 1528687580-549-23-git-send-email-stu.hsieh@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, Stu: On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote: > This patch add the connection from RDMA2 to DSI3 > > Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > index ce89a1d86b93..5a8569fa6505 100644 > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > @@ -96,6 +96,7 @@ > #define RDMA2_MOUT_DPI1 0x3 > #define RDMA2_MOUT_DSI1 0x1 > #define RDMA2_MOUT_DSI2 0x4 > +#define RDMA2_MOUT_DSI3 0x5 Usually, each bit of a mout register represent a output enable. Is this value 0x5 a correct value? Regards, CK > #define DPI0_SEL_IN_RDMA1 0x1 > #define DPI0_SEL_IN_RDMA2 0x3 > #define DPI1_SEL_IN_RDMA1 (0x1 << 8) > @@ -105,6 +106,7 @@ > #define DSI2_SEL_IN_RDMA1 (0x1 << 16) > #define DSI2_SEL_IN_RDMA2 (0x4 << 16) > #define DSI3_SEL_IN_RDMA1 (0x1 << 16) > +#define DSI3_SEL_IN_RDMA2 (0x4 << 16) > #define COLOR1_SEL_IN_OVL1 0x1 > > #define OVL_MOUT_EN_RDMA 0x1 > @@ -214,6 +216,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur, > } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI2) { > *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT; > value = RDMA2_MOUT_DSI2; > + } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI3) { > + *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT; > + value = RDMA2_MOUT_DSI3; > } else { > value = 0; > } > @@ -257,6 +262,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur, > } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI2) { > *addr = DISP_REG_CONFIG_DSIE_SEL_IN; > value = DSI2_SEL_IN_RDMA2; > + } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI3) { > + *addr = DISP_REG_CONFIG_DSIE_SEL_IN; > + value = DSI3_SEL_IN_RDMA2; > } else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) { > *addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN; > value = COLOR1_SEL_IN_OVL1;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c index ce89a1d86b93..5a8569fa6505 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c @@ -96,6 +96,7 @@ #define RDMA2_MOUT_DPI1 0x3 #define RDMA2_MOUT_DSI1 0x1 #define RDMA2_MOUT_DSI2 0x4 +#define RDMA2_MOUT_DSI3 0x5 #define DPI0_SEL_IN_RDMA1 0x1 #define DPI0_SEL_IN_RDMA2 0x3 #define DPI1_SEL_IN_RDMA1 (0x1 << 8) @@ -105,6 +106,7 @@ #define DSI2_SEL_IN_RDMA1 (0x1 << 16) #define DSI2_SEL_IN_RDMA2 (0x4 << 16) #define DSI3_SEL_IN_RDMA1 (0x1 << 16) +#define DSI3_SEL_IN_RDMA2 (0x4 << 16) #define COLOR1_SEL_IN_OVL1 0x1 #define OVL_MOUT_EN_RDMA 0x1 @@ -214,6 +216,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur, } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI2) { *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT; value = RDMA2_MOUT_DSI2; + } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI3) { + *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT; + value = RDMA2_MOUT_DSI3; } else { value = 0; } @@ -257,6 +262,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur, } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI2) { *addr = DISP_REG_CONFIG_DSIE_SEL_IN; value = DSI2_SEL_IN_RDMA2; + } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI3) { + *addr = DISP_REG_CONFIG_DSIE_SEL_IN; + value = DSI3_SEL_IN_RDMA2; } else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) { *addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN; value = COLOR1_SEL_IN_OVL1;
This patch add the connection from RDMA2 to DSI3 Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> --- drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++ 1 file changed, 8 insertions(+)