diff mbox

[13/14] ARM: dts: exynos: remove no longer needed samsung thermal properties

Message ID 1523873525-23718-14-git-send-email-b.zolnierkie@samsung.com (mailing list archive)
State Not Applicable, archived
Delegated to: Eduardo Valentin
Headers show

Commit Message

Bartlomiej Zolnierkiewicz April 16, 2018, 10:12 a.m. UTC 
Remove no longer needed samsung thermal properties.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 arch/arm/boot/dts/exynos3250.dtsi                 |  2 +-
 arch/arm/boot/dts/exynos4.dtsi                    |  2 +-
 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi | 20 --------------------
 arch/arm/boot/dts/exynos5250.dtsi                 |  2 +-
 arch/arm/boot/dts/exynos5410.dtsi                 |  8 ++++----
 arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi | 21 ---------------------
 arch/arm/boot/dts/exynos5420.dtsi                 | 10 +++++-----
 arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi | 20 --------------------
 arch/arm/boot/dts/exynos5440.dtsi                 |  6 +++---
 9 files changed, 15 insertions(+), 76 deletions(-)
 delete mode 100644 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
 delete mode 100644 arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
 delete mode 100644 arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi

Comments

Krzysztof Kozlowski April 16, 2018, 12:16 p.m. UTC | #1 
On Mon, Apr 16, 2018 at 12:12 PM, Bartlomiej Zolnierkiewicz
<b.zolnierkie@samsung.com> wrote:
> Remove no longer needed samsung thermal properties.
>
> There should be no functional changes caused by this patch.
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---
>  arch/arm/boot/dts/exynos3250.dtsi                 |  2 +-
>  arch/arm/boot/dts/exynos4.dtsi                    |  2 +-
>  arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi | 20 --------------------
>  arch/arm/boot/dts/exynos5250.dtsi                 |  2 +-
>  arch/arm/boot/dts/exynos5410.dtsi                 |  8 ++++----
>  arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi | 21 ---------------------
>  arch/arm/boot/dts/exynos5420.dtsi                 | 10 +++++-----
>  arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi | 20 --------------------
>  arch/arm/boot/dts/exynos5440.dtsi                 |  6 +++---
>  9 files changed, 15 insertions(+), 76 deletions(-)
>  delete mode 100644 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
>  delete mode 100644 arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
>  delete mode 100644 arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi

Thanks for splitting. Looks good. I'll take both (#13 and #14) after
thermal changes hit mainline (so probably for v4.19).
https://patchwork.kernel.org/bundle/krzk/for-v4.19/

Best regards,
Krzysztof
Krzysztof Kozlowski June 20, 2018, 7:17 p.m. UTC | #2 
On Mon, Apr 16, 2018 at 12:12:04PM +0200, Bartlomiej Zolnierkiewicz wrote:
> Remove no longer needed samsung thermal properties.
> 
> There should be no functional changes caused by this patch.
> 
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---
>  arch/arm/boot/dts/exynos3250.dtsi                 |  2 +-
>  arch/arm/boot/dts/exynos4.dtsi                    |  2 +-
>  arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi | 20 --------------------
>  arch/arm/boot/dts/exynos5250.dtsi                 |  2 +-
>  arch/arm/boot/dts/exynos5410.dtsi                 |  8 ++++----
>  arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi | 21 ---------------------
>  arch/arm/boot/dts/exynos5420.dtsi                 | 10 +++++-----
>  arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi | 20 --------------------
>  arch/arm/boot/dts/exynos5440.dtsi                 |  6 +++---
>  9 files changed, 15 insertions(+), 76 deletions(-)
>  delete mode 100644 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
>  delete mode 100644 arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
>  delete mode 100644 arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
>

A lot of changes came in recently so this does not apply anymore. Could
you rebase on my for-next branch?

Best regards,
Krzysztof
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 0a5f989..d6e014f 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -227,7 +227,7 @@ 
 			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 909a9f2..ca1921d 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -736,7 +736,7 @@ 
 			reg = <0x100C0000 0x100>;
 			interrupts = <2 4>;
 			status = "disabled";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		jpeg_codec: jpeg-codec@11840000 {
diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
deleted file mode 100644
index 489b58c..0000000
--- a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos4412 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <55>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 45283a6..45242ba 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -282,7 +282,7 @@ 
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		sata: sata@122f0000 {
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 55509c6..b8b68ec 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -93,7 +93,7 @@ 
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu1: tmu@10064000 {
@@ -102,7 +102,7 @@ 
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu2: tmu@10068000 {
@@ -111,7 +111,7 @@ 
 			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu3: tmu@1006c000 {
@@ -120,7 +120,7 @@ 
 			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		mmc_0: mmc@12200000 {
diff --git a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
deleted file mode 100644
index fbc77cb..0000000
--- a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5420 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- * Copyright (c) 2017 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <55>;
-samsung,tmu_min_efuse_value = <0>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 2f3cb2a..85d8656 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -722,7 +722,7 @@ 
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu1: tmu@10064000 {
@@ -731,7 +731,7 @@ 
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu2: tmu@10068000 {
@@ -740,7 +740,7 @@ 
 			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
 			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu3: tmu@1006c000 {
@@ -749,7 +749,7 @@ 
 			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
 			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_gpu: tmu@100a0000 {
@@ -758,7 +758,7 @@ 
 			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
 			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		sysmmu_g2dr: sysmmu@0x10A60000 {
diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
deleted file mode 100644
index 0421c3d..0000000
--- a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5440 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <5>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <0x5d2d>;
-samsung,tmu_min_efuse_value = <16>;
-samsung,tmu_max_efuse_value = <76>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <70>;
-samsung,tmu_default_temp_offset = <25>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index f3abecc4..a6323a4 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -234,7 +234,7 @@ 
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_B_125>;
 			clock-names = "tmu_apbif";
-			#include "exynos5440-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmuctrl_1: tmuctrl@16011c {
@@ -243,7 +243,7 @@ 
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_B_125>;
 			clock-names = "tmu_apbif";
-			#include "exynos5440-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmuctrl_2: tmuctrl@160120 {
@@ -252,7 +252,7 @@ 
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_B_125>;
 			clock-names = "tmu_apbif";
-			#include "exynos5440-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		sata@210000 {