| Message ID | 20180522062853.24799-1-sebastien.szymanski@armadeus.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 22-05-18, 08:28, Sébastien Szymanski wrote: > Check the max speed supported from the fuses for i.MX6ULL and update the > operating points table accordingly. > > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> > --- > > Changes for v3: > - none @Sascha and Shawn: Can you guys please Ack this series if there is nothing wrong with it ?
On 22-05-18, 08:28, Sébastien Szymanski wrote: > Check the max speed supported from the fuses for i.MX6ULL and update the > operating points table accordingly. > > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> > --- > > Changes for v3: > - none > > Changes for v2: > - none > > drivers/cpufreq/imx6q-cpufreq.c | 29 +++++++++++++++++++++++------ > 1 file changed, 23 insertions(+), 6 deletions(-) > > diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c > index 83cf631fc9bc..f094687cae52 100644 > --- a/drivers/cpufreq/imx6q-cpufreq.c > +++ b/drivers/cpufreq/imx6q-cpufreq.c > @@ -266,6 +266,8 @@ static void imx6q_opp_check_speed_grading(struct device *dev) > } > > #define OCOTP_CFG3_6UL_SPEED_696MHZ 0x2 > +#define OCOTP_CFG3_6ULL_SPEED_792MHZ 0x2 > +#define OCOTP_CFG3_6ULL_SPEED_900MHZ 0x3 > > static void imx6ul_opp_check_speed_grading(struct device *dev) > { > @@ -287,16 +289,30 @@ static void imx6ul_opp_check_speed_grading(struct device *dev) > * Speed GRADING[1:0] defines the max speed of ARM: > * 2b'00: Reserved; > * 2b'01: 528000000Hz; > - * 2b'10: 696000000Hz; > - * 2b'11: Reserved; > + * 2b'10: 696000000Hz on i.MX6UL, 792000000Hz on i.MX6ULL; > + * 2b'11: 900000000Hz on i.MX6ULL only; > * We need to set the max speed of ARM according to fuse map. > */ > val = readl_relaxed(base + OCOTP_CFG3); > val >>= OCOTP_CFG3_SPEED_SHIFT; > val &= 0x3; > - if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) > - if (dev_pm_opp_disable(dev, 696000000)) > - dev_warn(dev, "failed to disable 696MHz OPP\n"); > + > + if (of_machine_is_compatible("fsl,imx6ul")) { > + if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) > + if (dev_pm_opp_disable(dev, 696000000)) > + dev_warn(dev, "failed to disable 696MHz OPP\n"); > + } > + > + if (of_machine_is_compatible("fsl,imx6ull")) { > + if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ) > + if (dev_pm_opp_disable(dev, 792000000)) > + dev_warn(dev, "failed to disable 792MHz OPP\n"); > + > + if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ) > + if (dev_pm_opp_disable(dev, 900000000)) > + dev_warn(dev, "failed to disable 900MHz OPP\n"); > + } > + > iounmap(base); > put_node: > of_node_put(np); > @@ -356,7 +372,8 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) > goto put_reg; > } > > - if (of_machine_is_compatible("fsl,imx6ul")) > + if (of_machine_is_compatible("fsl,imx6ul") || > + of_machine_is_compatible("fsl,imx6ull")) > imx6ul_opp_check_speed_grading(cpu_dev); > else > imx6q_opp_check_speed_grading(cpu_dev); Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
On 22.05.2018 08:28, Sébastien Szymanski wrote: > Check the max speed supported from the fuses for i.MX6ULL and update the > operating points table accordingly. > > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Tested with a 528MHz and 792MHz rated i.MX 6ULL, looks good! Tested-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Stefan Agner <stefan@agner.ch> -- Stefan > --- > > Changes for v3: > - none > > Changes for v2: > - none > > drivers/cpufreq/imx6q-cpufreq.c | 29 +++++++++++++++++++++++------ > 1 file changed, 23 insertions(+), 6 deletions(-) > > diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c > index 83cf631fc9bc..f094687cae52 100644 > --- a/drivers/cpufreq/imx6q-cpufreq.c > +++ b/drivers/cpufreq/imx6q-cpufreq.c > @@ -266,6 +266,8 @@ static void imx6q_opp_check_speed_grading(struct > device *dev) > } > > #define OCOTP_CFG3_6UL_SPEED_696MHZ 0x2 > +#define OCOTP_CFG3_6ULL_SPEED_792MHZ 0x2 > +#define OCOTP_CFG3_6ULL_SPEED_900MHZ 0x3 > > static void imx6ul_opp_check_speed_grading(struct device *dev) > { > @@ -287,16 +289,30 @@ static void > imx6ul_opp_check_speed_grading(struct device *dev) > * Speed GRADING[1:0] defines the max speed of ARM: > * 2b'00: Reserved; > * 2b'01: 528000000Hz; > - * 2b'10: 696000000Hz; > - * 2b'11: Reserved; > + * 2b'10: 696000000Hz on i.MX6UL, 792000000Hz on i.MX6ULL; > + * 2b'11: 900000000Hz on i.MX6ULL only; > * We need to set the max speed of ARM according to fuse map. > */ > val = readl_relaxed(base + OCOTP_CFG3); > val >>= OCOTP_CFG3_SPEED_SHIFT; > val &= 0x3; > - if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) > - if (dev_pm_opp_disable(dev, 696000000)) > - dev_warn(dev, "failed to disable 696MHz OPP\n"); > + > + if (of_machine_is_compatible("fsl,imx6ul")) { > + if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) > + if (dev_pm_opp_disable(dev, 696000000)) > + dev_warn(dev, "failed to disable 696MHz OPP\n"); > + } > + > + if (of_machine_is_compatible("fsl,imx6ull")) { > + if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ) > + if (dev_pm_opp_disable(dev, 792000000)) > + dev_warn(dev, "failed to disable 792MHz OPP\n"); > + > + if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ) > + if (dev_pm_opp_disable(dev, 900000000)) > + dev_warn(dev, "failed to disable 900MHz OPP\n"); > + } > + > iounmap(base); > put_node: > of_node_put(np); > @@ -356,7 +372,8 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) > goto put_reg; > } > > - if (of_machine_is_compatible("fsl,imx6ul")) > + if (of_machine_is_compatible("fsl,imx6ul") || > + of_machine_is_compatible("fsl,imx6ull")) > imx6ul_opp_check_speed_grading(cpu_dev); > else > imx6q_opp_check_speed_grading(cpu_dev);
On 05/23/2018 06:29 AM, Viresh Kumar wrote: > On 22-05-18, 08:28, Sébastien Szymanski wrote: >> Check the max speed supported from the fuses for i.MX6ULL and update the >> operating points table accordingly. >> >> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> >> --- >> >> Changes for v3: >> - none > > @Sascha and Shawn: Can you guys please Ack this series if there is > nothing wrong with it ? > ping...
On Tue, May 22, 2018 at 3:28 AM, Sébastien Szymanski <sebastien.szymanski@armadeus.com> wrote: > Check the max speed supported from the fuses for i.MX6ULL and update the > operating points table accordingly. > > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
On Tue, May 22, 2018 at 08:28:51AM +0200, Sébastien Szymanski wrote: > Check the max speed supported from the fuses for i.MX6ULL and update the > operating points table accordingly. > > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Acked-by: Shawn Guo <shawnguo@kernel.org>
On Monday, June 11, 2018 7:38:27 AM CEST Shawn Guo wrote: > On Tue, May 22, 2018 at 08:28:51AM +0200, Sébastien Szymanski wrote: > > Check the max speed supported from the fuses for i.MX6ULL and update the > > operating points table accordingly. > > > > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> > > Acked-by: Shawn Guo <shawnguo@kernel.org> Patch applied, thanks!
Hi, On 06/11/2018 07:38 AM, Shawn Guo wrote: > On Tue, May 22, 2018 at 08:28:51AM +0200, Sébastien Szymanski wrote: >> Check the max speed supported from the fuses for i.MX6ULL and update the >> operating points table accordingly. >> >> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> > > Acked-by: Shawn Guo <shawnguo@kernel.org> > Thanks, but what about the two others patches ? Now that patch 1 is in 4.18-rc1, should I resend the two others patches ? Should I merge them together ?
On Mon, Jun 25, 2018 at 10:01 AM, Sébastien Szymanski <sebastien.szymanski@armadeus.com> wrote: > Hi, > > On 06/11/2018 07:38 AM, Shawn Guo wrote: >> On Tue, May 22, 2018 at 08:28:51AM +0200, Sébastien Szymanski wrote: >>> Check the max speed supported from the fuses for i.MX6ULL and update the >>> operating points table accordingly. >>> >>> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> >> >> Acked-by: Shawn Guo <shawnguo@kernel.org> >> > > Thanks, but what about the two others patches ? Now that patch 1 is in > 4.18-rc1, should I resend the two others patches ? Please do. > Should I merge them together ? If they make related changes, you can do that.
On Mon, Jun 25, 2018 at 10:01:44AM +0200, Sébastien Szymanski wrote: > Hi, > > On 06/11/2018 07:38 AM, Shawn Guo wrote: > > On Tue, May 22, 2018 at 08:28:51AM +0200, Sébastien Szymanski wrote: > >> Check the max speed supported from the fuses for i.MX6ULL and update the > >> operating points table accordingly. > >> > >> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> > > > > Acked-by: Shawn Guo <shawnguo@kernel.org> > > > > Thanks, but what about the two others patches ? Now that patch 1 is in > 4.18-rc1, should I resend the two others patches ? Should I merge them > together ? Yes, please. That's what Viresh and Stefan were asking in the review. Shawn
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 83cf631fc9bc..f094687cae52 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -266,6 +266,8 @@ static void imx6q_opp_check_speed_grading(struct device *dev) } #define OCOTP_CFG3_6UL_SPEED_696MHZ 0x2 +#define OCOTP_CFG3_6ULL_SPEED_792MHZ 0x2 +#define OCOTP_CFG3_6ULL_SPEED_900MHZ 0x3 static void imx6ul_opp_check_speed_grading(struct device *dev) { @@ -287,16 +289,30 @@ static void imx6ul_opp_check_speed_grading(struct device *dev) * Speed GRADING[1:0] defines the max speed of ARM: * 2b'00: Reserved; * 2b'01: 528000000Hz; - * 2b'10: 696000000Hz; - * 2b'11: Reserved; + * 2b'10: 696000000Hz on i.MX6UL, 792000000Hz on i.MX6ULL; + * 2b'11: 900000000Hz on i.MX6ULL only; * We need to set the max speed of ARM according to fuse map. */ val = readl_relaxed(base + OCOTP_CFG3); val >>= OCOTP_CFG3_SPEED_SHIFT; val &= 0x3; - if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) - if (dev_pm_opp_disable(dev, 696000000)) - dev_warn(dev, "failed to disable 696MHz OPP\n"); + + if (of_machine_is_compatible("fsl,imx6ul")) { + if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) + if (dev_pm_opp_disable(dev, 696000000)) + dev_warn(dev, "failed to disable 696MHz OPP\n"); + } + + if (of_machine_is_compatible("fsl,imx6ull")) { + if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ) + if (dev_pm_opp_disable(dev, 792000000)) + dev_warn(dev, "failed to disable 792MHz OPP\n"); + + if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ) + if (dev_pm_opp_disable(dev, 900000000)) + dev_warn(dev, "failed to disable 900MHz OPP\n"); + } + iounmap(base); put_node: of_node_put(np); @@ -356,7 +372,8 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) goto put_reg; } - if (of_machine_is_compatible("fsl,imx6ul")) + if (of_machine_is_compatible("fsl,imx6ul") || + of_machine_is_compatible("fsl,imx6ull")) imx6ul_opp_check_speed_grading(cpu_dev); else imx6q_opp_check_speed_grading(cpu_dev);
Check the max speed supported from the fuses for i.MX6ULL and update the operating points table accordingly. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> --- Changes for v3: - none Changes for v2: - none drivers/cpufreq/imx6q-cpufreq.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-)