diff mbox

[dts] fix green/blue pio-led on bananapi-r2

Message ID trinity-0d48bc23-f754-4da3-af01-c3a7abe1d34b-1529682783853@3c-app-gmx-bs42 (mailing list archive)
State New, archived
Headers show

Commit Message

Frank Wunderlich June 22, 2018, 3:53 p.m. UTC 
From: Frank Wunderlich <frank-w@public-files.de>
Date: Sun, 17 Jun 2018 19:11:58 +0200
Subject: [PATCH] [dts] fix green/blue pio-led
 green/blue pio-leds (near GPIO-Header) are swapped and LOW-active
 this patch restore this expected behaviour
 red cannot be switched afaik
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Comments

Sean Wang June 25, 2018, 9:17 a.m. UTC | #1 
On Fri, 2018-06-22 at 17:53 +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> Date: Sun, 17 Jun 2018 19:11:58 +0200
> Subject: [PATCH] [dts] fix green/blue pio-led
>  green/blue pio-leds (near GPIO-Header) are swapped and LOW-active
>  this patch restore this expected behaviour
>  red cannot be switched afaik
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
>  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 531d905d924ff..3e8a0ffe8b13e 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -89,21 +89,21 @@
>          pinctrl-names = "default";
>          pinctrl-0 = <&led_pins_a>;
>  
> -        blue {
> -            label = "bpi-r2:pio:blue";
> -            gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
> +        green {
> +            label = "bpi-r2:pio:green";
> +            gpios = <&pio 241 GPIO_ACTIVE_LOW>;
>              default-state = "off";
>          };
>  
> -        green {
> -            label = "bpi-r2:pio:green";
> -            gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
> +        blue {
> +            label = "bpi-r2:pio:blue";
> +            gpios = <&pio 240 GPIO_ACTIVE_LOW>;
>              default-state = "off";
>          };
>  
>          red {
>              label = "bpi-r2:pio:red";
> -            gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
> +            gpios = <&pio 239 GPIO_ACTIVE_LOW>;
>              default-state = "off";
>          };
>      };
>  

Hi, Frank

Node name should be listed in alphabetic order that means you should
keep the order and only have the fixes for its content.

Apart from that
	Reviewed-by: Sean Wang <sean.wang@mediatek.com>
	
>  
>  
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
diff mbox

Patch

diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 531d905d924ff..3e8a0ffe8b13e 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -89,21 +89,21 @@ 
         pinctrl-names = "default";
         pinctrl-0 = <&led_pins_a>;
 
-        blue {
-            label = "bpi-r2:pio:blue";
-            gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
+        green {
+            label = "bpi-r2:pio:green";
+            gpios = <&pio 241 GPIO_ACTIVE_LOW>;
             default-state = "off";
         };
 
-        green {
-            label = "bpi-r2:pio:green";
-            gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
+        blue {
+            label = "bpi-r2:pio:blue";
+            gpios = <&pio 240 GPIO_ACTIVE_LOW>;
             default-state = "off";
         };
 
         red {
             label = "bpi-r2:pio:red";
-            gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
+            gpios = <&pio 239 GPIO_ACTIVE_LOW>;
             default-state = "off";
         };
     };