| Message ID | 1526824191-7000-8-git-send-email-nipun.gupta@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On 20/05/18 14:49, Nipun Gupta wrote: > fsl-mc bus support the new iommu-map property. Comply to this binding > for fsl_mc bus. > > Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> > Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> > --- > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > index 137ef4d..6010505 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > @@ -184,6 +184,7 @@ > #address-cells = <2>; > #size-cells = <2>; > ranges; > + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; > > clockgen: clocking@1300000 { > compatible = "fsl,ls2080a-clockgen"; > @@ -357,6 +358,8 @@ > reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ > <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ > msi-parent = <&its>; > + iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ > + dma-coherent; > #address-cells = <3>; > #size-cells = <1>; > > @@ -460,6 +463,8 @@ > compatible = "arm,mmu-500"; > reg = <0 0x5000000 0 0x800000>; > #global-interrupts = <12>; > + #iommu-cells = <1>; > + stream-match-mask = <0x7C00>; > interrupts = <0 13 4>, /* global secure fault */ > <0 14 4>, /* combined secure interrupt */ > <0 15 4>, /* global non-secure fault */ > @@ -502,7 +507,6 @@ > <0 204 4>, <0 205 4>, > <0 206 4>, <0 207 4>, > <0 208 4>, <0 209 4>; > - mmu-masters = <&fsl_mc 0x300 0>; Since we're in here, is the SMMU itself also coherent? If it is, you probably want to say so and avoid the overhead of pointlessly cleaning cache lines on every page table update. Robin. > }; > > dspi: dspi@2100000 { >
> -----Original Message----- > From: Robin Murphy [mailto:robin.murphy@arm.com] > Sent: Tuesday, July 3, 2018 10:06 PM > To: Nipun Gupta <nipun.gupta@nxp.com>; will.deacon@arm.com; > robh+dt@kernel.org; robh@kernel.org; mark.rutland@arm.com; > catalin.marinas@arm.com; gregkh@linuxfoundation.org; Laurentiu Tudor > <laurentiu.tudor@nxp.com>; bhelgaas@google.com > Cc: hch@lst.de; joro@8bytes.org; m.szyprowski@samsung.com; > shawnguo@kernel.org; frowand.list@gmail.com; iommu@lists.linux- > foundation.org; linux-kernel@vger.kernel.org; devicetree@vger.kernel.org; > linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org; linux- > pci@vger.kernel.org; Bharat Bhushan <bharat.bhushan@nxp.com>; > stuyoder@gmail.com; Leo Li <leoyang.li@nxp.com> > Subject: Re: [PATCH 7/7 v5] arm64: dts: ls208xa: comply with the iommu map > binding for fsl_mc > > On 20/05/18 14:49, Nipun Gupta wrote: > > fsl-mc bus support the new iommu-map property. Comply to this binding > > for fsl_mc bus. > > > > Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> > > Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> > > --- > > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 6 +++++- > > 1 file changed, 5 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > > index 137ef4d..6010505 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi > > @@ -184,6 +184,7 @@ > > #address-cells = <2>; > > #size-cells = <2>; > > ranges; > > + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; > > > > clockgen: clocking@1300000 { > > compatible = "fsl,ls2080a-clockgen"; > > @@ -357,6 +358,8 @@ > > reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal > base */ > > <0x00000000 0x08340000 0 0x40000>; /* MC > control reg */ > > msi-parent = <&its>; > > + iommu-map = <0 &smmu 0 0>; /* This is fixed-up by > u-boot */ > > + dma-coherent; > > #address-cells = <3>; > > #size-cells = <1>; > > > > @@ -460,6 +463,8 @@ > > compatible = "arm,mmu-500"; > > reg = <0 0x5000000 0 0x800000>; > > #global-interrupts = <12>; > > + #iommu-cells = <1>; > > + stream-match-mask = <0x7C00>; > > interrupts = <0 13 4>, /* global secure fault */ > > <0 14 4>, /* combined secure interrupt */ > > <0 15 4>, /* global non-secure fault */ > > @@ -502,7 +507,6 @@ > > <0 204 4>, <0 205 4>, > > <0 206 4>, <0 207 4>, > > <0 208 4>, <0 209 4>; > > - mmu-masters = <&fsl_mc 0x300 0>; > > Since we're in here, is the SMMU itself also coherent? If it is, you > probably want to say so and avoid the overhead of pointlessly cleaning > cache lines on every page table update. Yes, dma-coherent property is also required here. I missed it somehow. Thanks for pointing this. Regards, Nipun > > Robin. > > > }; > > > > dspi: dspi@2100000 { > >
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 137ef4d..6010505 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -184,6 +184,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; clockgen: clocking@1300000 { compatible = "fsl,ls2080a-clockgen"; @@ -357,6 +358,8 @@ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ msi-parent = <&its>; + iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ + dma-coherent; #address-cells = <3>; #size-cells = <1>; @@ -460,6 +463,8 @@ compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; #global-interrupts = <12>; + #iommu-cells = <1>; + stream-match-mask = <0x7C00>; interrupts = <0 13 4>, /* global secure fault */ <0 14 4>, /* combined secure interrupt */ <0 15 4>, /* global non-secure fault */ @@ -502,7 +507,6 @@ <0 204 4>, <0 205 4>, <0 206 4>, <0 207 4>, <0 208 4>, <0 209 4>; - mmu-masters = <&fsl_mc 0x300 0>; }; dspi: dspi@2100000 {