| Message ID | 20180706153805.25842-4-icenowy@aosc.io (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Jul 6, 2018 at 11:37 PM, Icenowy Zheng <icenowy@aosc.io> wrote: > Allwinner H6 has two USB2 ports, one OTG and one host-only. > > Add device tree nodes related to them. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > --- > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 90 ++++++++++++++++++++ > 1 file changed, 90 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > index c72da8cd9ef5..62fc0f5e10ba 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > @@ -174,6 +174,96 @@ > status = "disabled"; > }; > > + usb2otg: usb@5100000 { > + compatible = "allwinner,sun8i-a33-musb"; > + reg = <0x05100000 0x0400>; > + clocks = <&ccu CLK_BUS_OTG>; > + resets = <&ccu RST_BUS_OTG>; > + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "mc"; > + phys = <&usb2phy 0>; > + phy-names = "usb"; > + extcon = <&usb2phy 0>; > + status = "disabled"; > + }; > + > + usb2phy: phy@5100400 { > + compatible = "allwinner,sun50i-h6-usb-phy"; > + reg = <0x05100400 0x14>, > + <0x05101800 0x4>, > + <0x05311800 0x4>; > + reg-names = "phy_ctrl", > + "pmu0", > + "pmu3"; > + clocks = <&ccu CLK_USB_PHY0>, > + <&ccu CLK_USB_PHY3>; > + clock-names = "usb0_phy", > + "usb3_phy"; > + resets = <&ccu RST_USB_PHY0>, > + <&ccu RST_USB_PHY3>; > + reset-names = "usb0_reset", > + "usb3_reset"; > + status = "disabled"; > + #phy-cells = <1>; > + }; > + > + ehci0: usb@5101000 { > + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; > + reg = <0x05101000 0x100>; > + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_OHCI0>, > + <&ccu CLK_BUS_EHCI0>, > + <&ccu CLK_USB_OHCI0>; > + resets = <&ccu RST_BUS_OHCI0>, > + <&ccu RST_BUS_EHCI0>; > + status = "disabled"; > + }; > + > + ohci0: usb@5101400 { > + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci"; > + reg = <0x05101400 0x100>; > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_OHCI0>, > + <&ccu CLK_USB_OHCI0>; > + resets = <&ccu RST_BUS_OHCI0>; > + status = "disabled"; > + }; > + > + usb3phy: phy@5210000 { Maybe you should split this one out and put it in the USB 3.0 patch? ChenYu > + compatible = "allwinner,sun50i-h6-usb3-phy"; > + reg = <0x5210000 0x10000>; > + clocks = <&ccu CLK_USB_PHY1>; > + resets = <&ccu RST_USB_PHY1>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + > + ehci3: usb@5311000 { > + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; > + reg = <0x05311000 0x100>; > + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_OHCI3>, > + <&ccu CLK_BUS_EHCI3>, > + <&ccu CLK_USB_OHCI3>; > + resets = <&ccu RST_BUS_OHCI3>, > + <&ccu RST_BUS_EHCI3>; > + phys = <&usb2phy 3>; > + phy-names = "usb"; > + status = "disabled"; > + }; > + > + ohci3: usb@5311400 { > + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci"; > + reg = <0x05311400 0x100>; > + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_OHCI3>, > + <&ccu CLK_USB_OHCI3>; > + resets = <&ccu RST_BUS_OHCI3>; > + phys = <&usb2phy 3>; > + phy-names = "usb"; > + status = "disabled"; > + }; > + > r_ccu: clock@7010000 { > compatible = "allwinner,sun50i-h6-r-ccu"; > reg = <0x07010000 0x400>; > -- > 2.17.1 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout.
于 2018年7月7日 GMT+08:00 上午11:31:39, Chen-Yu Tsai <wens@csie.org> 写到: >On Fri, Jul 6, 2018 at 11:37 PM, Icenowy Zheng <icenowy@aosc.io> wrote: >> Allwinner H6 has two USB2 ports, one OTG and one host-only. >> >> Add device tree nodes related to them. >> >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> >> --- >> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 90 >++++++++++++++++++++ >> 1 file changed, 90 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi >b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi >> index c72da8cd9ef5..62fc0f5e10ba 100644 >> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi >> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi >> @@ -174,6 +174,96 @@ >> status = "disabled"; >> }; >> >> + usb2otg: usb@5100000 { >> + compatible = "allwinner,sun8i-a33-musb"; >> + reg = <0x05100000 0x0400>; >> + clocks = <&ccu CLK_BUS_OTG>; >> + resets = <&ccu RST_BUS_OTG>; >> + interrupts = <GIC_SPI 23 >IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-names = "mc"; >> + phys = <&usb2phy 0>; >> + phy-names = "usb"; >> + extcon = <&usb2phy 0>; >> + status = "disabled"; >> + }; >> + >> + usb2phy: phy@5100400 { >> + compatible = "allwinner,sun50i-h6-usb-phy"; >> + reg = <0x05100400 0x14>, >> + <0x05101800 0x4>, >> + <0x05311800 0x4>; >> + reg-names = "phy_ctrl", >> + "pmu0", >> + "pmu3"; >> + clocks = <&ccu CLK_USB_PHY0>, >> + <&ccu CLK_USB_PHY3>; >> + clock-names = "usb0_phy", >> + "usb3_phy"; >> + resets = <&ccu RST_USB_PHY0>, >> + <&ccu RST_USB_PHY3>; >> + reset-names = "usb0_reset", >> + "usb3_reset"; >> + status = "disabled"; >> + #phy-cells = <1>; >> + }; >> + >> + ehci0: usb@5101000 { >> + compatible = "allwinner,sun50i-h6-ehci", >"generic-ehci"; >> + reg = <0x05101000 0x100>; >> + interrupts = <GIC_SPI 24 >IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&ccu CLK_BUS_OHCI0>, >> + <&ccu CLK_BUS_EHCI0>, >> + <&ccu CLK_USB_OHCI0>; >> + resets = <&ccu RST_BUS_OHCI0>, >> + <&ccu RST_BUS_EHCI0>; >> + status = "disabled"; >> + }; >> + >> + ohci0: usb@5101400 { >> + compatible = "allwinner,sun50i-h6-ohci", >"generic-ohci"; >> + reg = <0x05101400 0x100>; >> + interrupts = <GIC_SPI 25 >IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&ccu CLK_BUS_OHCI0>, >> + <&ccu CLK_USB_OHCI0>; >> + resets = <&ccu RST_BUS_OHCI0>; >> + status = "disabled"; >> + }; >> + >> + usb3phy: phy@5210000 { > >Maybe you should split this one out and put it in the USB 3.0 patch? Sorry, -EREBASE. > >ChenYu > >> + compatible = "allwinner,sun50i-h6-usb3-phy"; >> + reg = <0x5210000 0x10000>; >> + clocks = <&ccu CLK_USB_PHY1>; >> + resets = <&ccu RST_USB_PHY1>; >> + #phy-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + ehci3: usb@5311000 { >> + compatible = "allwinner,sun50i-h6-ehci", >"generic-ehci"; >> + reg = <0x05311000 0x100>; >> + interrupts = <GIC_SPI 28 >IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&ccu CLK_BUS_OHCI3>, >> + <&ccu CLK_BUS_EHCI3>, >> + <&ccu CLK_USB_OHCI3>; >> + resets = <&ccu RST_BUS_OHCI3>, >> + <&ccu RST_BUS_EHCI3>; >> + phys = <&usb2phy 3>; >> + phy-names = "usb"; >> + status = "disabled"; >> + }; >> + >> + ohci3: usb@5311400 { >> + compatible = "allwinner,sun50i-h6-ohci", >"generic-ohci"; >> + reg = <0x05311400 0x100>; >> + interrupts = <GIC_SPI 29 >IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&ccu CLK_BUS_OHCI3>, >> + <&ccu CLK_USB_OHCI3>; >> + resets = <&ccu RST_BUS_OHCI3>; >> + phys = <&usb2phy 3>; >> + phy-names = "usb"; >> + status = "disabled"; >> + }; >> + >> r_ccu: clock@7010000 { >> compatible = "allwinner,sun50i-h6-r-ccu"; >> reg = <0x07010000 0x400>; >> -- >> 2.17.1 >> >> -- >> You received this message because you are subscribed to the Google >Groups "linux-sunxi" group. >> To unsubscribe from this group and stop receiving emails from it, >send an email to linux-sunxi+unsubscribe@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > >_______________________________________________ >linux-arm-kernel mailing list >linux-arm-kernel@lists.infradead.org >http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index c72da8cd9ef5..62fc0f5e10ba 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -174,6 +174,96 @@ status = "disabled"; }; + usb2otg: usb@5100000 { + compatible = "allwinner,sun8i-a33-musb"; + reg = <0x05100000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usb2phy 0>; + phy-names = "usb"; + extcon = <&usb2phy 0>; + status = "disabled"; + }; + + usb2phy: phy@5100400 { + compatible = "allwinner,sun50i-h6-usb-phy"; + reg = <0x05100400 0x14>, + <0x05101800 0x4>, + <0x05311800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu3"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY3>; + clock-names = "usb0_phy", + "usb3_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY3>; + reset-names = "usb0_reset", + "usb3_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@5101000 { + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; + reg = <0x05101000 0x100>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_BUS_EHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>, + <&ccu RST_BUS_EHCI0>; + status = "disabled"; + }; + + ohci0: usb@5101400 { + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci"; + reg = <0x05101400 0x100>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>; + status = "disabled"; + }; + + usb3phy: phy@5210000 { + compatible = "allwinner,sun50i-h6-usb3-phy"; + reg = <0x5210000 0x10000>; + clocks = <&ccu CLK_USB_PHY1>; + resets = <&ccu RST_USB_PHY1>; + #phy-cells = <0>; + status = "disabled"; + }; + + ehci3: usb@5311000 { + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; + reg = <0x05311000 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_BUS_EHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_OHCI3>, + <&ccu RST_BUS_EHCI3>; + phys = <&usb2phy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci3: usb@5311400 { + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci"; + reg = <0x05311400 0x100>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_OHCI3>; + phys = <&usb2phy 3>; + phy-names = "usb"; + status = "disabled"; + }; + r_ccu: clock@7010000 { compatible = "allwinner,sun50i-h6-r-ccu"; reg = <0x07010000 0x400>;
Allwinner H6 has two USB2 ports, one OTG and one host-only. Add device tree nodes related to them. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 90 ++++++++++++++++++++ 1 file changed, 90 insertions(+)