Message ID | 20180718205645.25924-3-lyude@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Wed, Jul 18, 2018 at 04:56:40PM -0400, Lyude Paul wrote: > For nouveau, while the GPU is guaranteed to be on when a hotplug has > been received, the same assertion does not hold true if a connector > probe has been started by userspace without having had received a sysfs > event. > > So ensure that any connector probing keeps the GPU alive for the > duration of the probe by introducing > drm_helper_probe_single_connector_modes_with_rpm(). It's the same as > drm_helper_probe_single_connector_modes, but it handles holding a power > reference to the device for the duration of the connector probe. Hm, a runtime PM ref is already acquired in nouveau_connector_detect(). I'm wondering why that's not sufficient? Thanks, Lukas > > Signed-off-by: Lyude Paul <lyude@redhat.com> > Reviewed-by: Karol Herbst <karolherbst@gmail.com> > Cc: Lukas Wunner <lukas@wunner.de> > Cc: stable@vger.kernel.org > --- > Changes since v1: > - Add a generic helper to DRM to handle this > > drivers/gpu/drm/drm_probe_helper.c | 31 +++++++++++++++++++++ > drivers/gpu/drm/nouveau/dispnv50/disp.c | 2 +- > drivers/gpu/drm/nouveau/nouveau_connector.c | 4 +-- > include/drm/drm_crtc_helper.h | 7 +++-- > 4 files changed, 38 insertions(+), 6 deletions(-) > > diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c > index 527743394150..0a9d6748b854 100644 > --- a/drivers/gpu/drm/drm_probe_helper.c > +++ b/drivers/gpu/drm/drm_probe_helper.c > @@ -31,6 +31,7 @@ > > #include <linux/export.h> > #include <linux/moduleparam.h> > +#include <linux/pm_runtime.h> > > #include <drm/drmP.h> > #include <drm/drm_crtc.h> > @@ -541,6 +542,36 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, > } > EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); > > +/** > + * drm_helper_probe_single_connector_modes_with_rpm - get complete set of > + * display modes > + * @connector: connector to probe > + * @maxX: max width for modes > + * @maxY: max height for modes > + * > + * Same as drm_helper_probe_single_connector_modes, except that it makes sure > + * that the device is active by synchronously grabbing a runtime power > + * reference while probing. > + * > + * Returns: > + * The number of modes found on @connector. > + */ > +int drm_helper_probe_single_connector_modes_with_rpm(struct drm_connector *connector, > + uint32_t maxX, uint32_t maxY) > +{ > + int ret; > + > + ret = pm_runtime_get_sync(connector->dev->dev); > + if (ret < 0 && ret != -EACCES) > + return ret; > + > + ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY); > + > + pm_runtime_put(connector->dev->dev); > + return ret; > +} > +EXPORT_SYMBOL(drm_helper_probe_single_connector_modes_with_rpm); > + > /** > * drm_kms_helper_hotplug_event - fire off KMS hotplug events > * @dev: drm_device whose connector state changed > diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c > index fa3ab618a0f9..c54767b50fd8 100644 > --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c > +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c > @@ -858,7 +858,7 @@ static const struct drm_connector_funcs > nv50_mstc = { > .reset = nouveau_conn_reset, > .detect = nv50_mstc_detect, > - .fill_modes = drm_helper_probe_single_connector_modes, > + .fill_modes = drm_helper_probe_single_connector_modes_with_rpm, > .destroy = nv50_mstc_destroy, > .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, > .atomic_destroy_state = nouveau_conn_atomic_destroy_state, > diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c > index 2a45b4c2ceb0..8d9070779261 100644 > --- a/drivers/gpu/drm/nouveau/nouveau_connector.c > +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c > @@ -1088,7 +1088,7 @@ nouveau_connector_funcs = { > .reset = nouveau_conn_reset, > .detect = nouveau_connector_detect, > .force = nouveau_connector_force, > - .fill_modes = drm_helper_probe_single_connector_modes, > + .fill_modes = drm_helper_probe_single_connector_modes_with_rpm, > .set_property = nouveau_connector_set_property, > .destroy = nouveau_connector_destroy, > .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, > @@ -1103,7 +1103,7 @@ nouveau_connector_funcs_lvds = { > .reset = nouveau_conn_reset, > .detect = nouveau_connector_detect_lvds, > .force = nouveau_connector_force, > - .fill_modes = drm_helper_probe_single_connector_modes, > + .fill_modes = drm_helper_probe_single_connector_modes_with_rpm, > .set_property = nouveau_connector_set_property, > .destroy = nouveau_connector_destroy, > .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, > diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h > index 6914633037a5..8f3f6d6fcc8c 100644 > --- a/include/drm/drm_crtc_helper.h > +++ b/include/drm/drm_crtc_helper.h > @@ -64,9 +64,10 @@ int drm_helper_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, > struct drm_framebuffer *old_fb); > > /* drm_probe_helper.c */ > -int drm_helper_probe_single_connector_modes(struct drm_connector > - *connector, uint32_t maxX, > - uint32_t maxY); > +int drm_helper_probe_single_connector_modes(struct drm_connector *connector, > + uint32_t maxX, uint32_t maxY); > +int drm_helper_probe_single_connector_modes_with_rpm(struct drm_connector *connector, > + uint32_t maxX, uint32_t maxY); > int drm_helper_probe_detect(struct drm_connector *connector, > struct drm_modeset_acquire_ctx *ctx, > bool force); > -- > 2.17.1 >
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index 527743394150..0a9d6748b854 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -31,6 +31,7 @@ #include <linux/export.h> #include <linux/moduleparam.h> +#include <linux/pm_runtime.h> #include <drm/drmP.h> #include <drm/drm_crtc.h> @@ -541,6 +542,36 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, } EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); +/** + * drm_helper_probe_single_connector_modes_with_rpm - get complete set of + * display modes + * @connector: connector to probe + * @maxX: max width for modes + * @maxY: max height for modes + * + * Same as drm_helper_probe_single_connector_modes, except that it makes sure + * that the device is active by synchronously grabbing a runtime power + * reference while probing. + * + * Returns: + * The number of modes found on @connector. + */ +int drm_helper_probe_single_connector_modes_with_rpm(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY) +{ + int ret; + + ret = pm_runtime_get_sync(connector->dev->dev); + if (ret < 0 && ret != -EACCES) + return ret; + + ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY); + + pm_runtime_put(connector->dev->dev); + return ret; +} +EXPORT_SYMBOL(drm_helper_probe_single_connector_modes_with_rpm); + /** * drm_kms_helper_hotplug_event - fire off KMS hotplug events * @dev: drm_device whose connector state changed diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index fa3ab618a0f9..c54767b50fd8 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -858,7 +858,7 @@ static const struct drm_connector_funcs nv50_mstc = { .reset = nouveau_conn_reset, .detect = nv50_mstc_detect, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = drm_helper_probe_single_connector_modes_with_rpm, .destroy = nv50_mstc_destroy, .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, .atomic_destroy_state = nouveau_conn_atomic_destroy_state, diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 2a45b4c2ceb0..8d9070779261 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1088,7 +1088,7 @@ nouveau_connector_funcs = { .reset = nouveau_conn_reset, .detect = nouveau_connector_detect, .force = nouveau_connector_force, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = drm_helper_probe_single_connector_modes_with_rpm, .set_property = nouveau_connector_set_property, .destroy = nouveau_connector_destroy, .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, @@ -1103,7 +1103,7 @@ nouveau_connector_funcs_lvds = { .reset = nouveau_conn_reset, .detect = nouveau_connector_detect_lvds, .force = nouveau_connector_force, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = drm_helper_probe_single_connector_modes_with_rpm, .set_property = nouveau_connector_set_property, .destroy = nouveau_connector_destroy, .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 6914633037a5..8f3f6d6fcc8c 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -64,9 +64,10 @@ int drm_helper_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb); /* drm_probe_helper.c */ -int drm_helper_probe_single_connector_modes(struct drm_connector - *connector, uint32_t maxX, - uint32_t maxY); +int drm_helper_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY); +int drm_helper_probe_single_connector_modes_with_rpm(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY); int drm_helper_probe_detect(struct drm_connector *connector, struct drm_modeset_acquire_ctx *ctx, bool force);