[v5,1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points

Message ID	20180724234636.57137-1-mka@chromium.org (mailing list archive)
State	New, archived
Delegated to:	Andy Gross
Headers	show Return-Path: <linux-arm-msm-owner@kernel.org> From: Matthias Kaehlcke <mka@chromium.org> To: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will.deacon@arm.com>, Zhang Rui <rui.zhang@intel.com>, Eduardo Valentin <edubezval@gmail.com> Cc: linux-soc@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, David Collins <collinsd@codeaurora.org>, Douglas Anderson <dianders@chromium.org>, Stephen Boyd <sboyd@kernel.org>, Matthias Kaehlcke <mka@chromium.org> Subject: [PATCH v5 1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points Date: Tue, 24 Jul 2018 16:46:34 -0700 Message-Id: <20180724234636.57137-1-mka@chromium.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk
Series	[v5,1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points \| expand [v5,1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points [v5,2/3] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node [v5,3/3] arm64: dts: qcom: pm8998: Add pm8998 thermal zone

diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom-spmi-temp-alarm.c index ad4f3a8d6560..936e4dde4298 100644 --- a/drivers/thermal/qcom-spmi-temp-alarm.c +++ b/drivers/thermal/qcom-spmi-temp-alarm.c @@ -23,6 +23,8 @@ #include <linux/regmap.h> #include <linux/thermal.h> +#include "thermal_core.h" + #define QPNP_TM_REG_TYPE 0x04 #define QPNP_TM_REG_SUBTYPE 0x05 #define QPNP_TM_REG_STATUS 0x08 @@ -37,9 +39,11 @@ #define STATUS_GEN2_STATE_MASK GENMASK(6, 4) #define STATUS_GEN2_STATE_SHIFT 4 -#define SHUTDOWN_CTRL1_OVERRIDE_MASK GENMASK(7, 6) +#define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6) #define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0) +#define SHUTDOWN_CTRL1_RATE_25HZ BIT(3) + #define ALARM_CTRL_FORCE_ENABLE BIT(7) /* @@ -56,12 +60,17 @@ #define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */ #define THRESH_MIN 0 +#define THRESH_MAX 3 + +#define STAGE2_THRESHOLD_MIN 125000 /* Stage 2 Threshold Min: 125 C */ +#define STAGE2_THRESHOLD_MAX 140000 /* Stage 2 Threshold Max: 140 C */ /* Temperature in Milli Celsius reported during stage 0 if no ADC is present */ #define DEFAULT_TEMP 37000 struct qpnp_tm_chip { struct regmap *map; + struct device *dev; struct thermal_zone_device *tz_dev; unsigned int subtype; long temp; @@ -69,6 +78,10 @@ struct qpnp_tm_chip { unsigned int stage; unsigned int prev_stage; unsigned int base; + /* protects .thresh, .stage and chip registers */ + struct mutex lock; + bool initialized; + struct iio_channel *adc; }; @@ -125,6 +138,8 @@ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip) unsigned int stage, stage_new, stage_old; int ret; + WARN_ON(!mutex_is_locked(&chip->lock)); + ret = qpnp_tm_get_temp_stage(chip); if (ret < 0) return ret; @@ -163,8 +178,15 @@ static int qpnp_tm_get_temp(void *data, int *temp) if (!temp) return -EINVAL; - if (!chip->adc) { + if (!chip->initialized) { + *temp = DEFAULT_TEMP; + return 0; + } + + if (!chip->adc)) { + mutex_lock(&chip->lock); ret = qpnp_tm_update_temp_no_adc(chip); + mutex_unlock(&chip->lock); if (ret < 0) return ret; } else { @@ -180,8 +202,77 @@ static int qpnp_tm_get_temp(void *data, int *temp) return 0; } +static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip, + int temp) +{ + u8 reg; + bool disable_s2_shutdown = false; + int ret; + + WARN_ON(!mutex_is_locked(&chip->lock)); + + /* + * Default: S2 and S3 shutdown enabled, thresholds at + * 105C/125C/145C, monitoring at 25Hz + */ + reg = SHUTDOWN_CTRL1_RATE_25HZ; + + if ((temp == THERMAL_TEMP_INVALID) || + (temp < STAGE2_THRESHOLD_MIN)) { + chip->thresh = THRESH_MIN; + goto skip; + } + + if (temp <= STAGE2_THRESHOLD_MAX) { + chip->thresh = THRESH_MAX - + ((STAGE2_THRESHOLD_MAX - temp) / + TEMP_THRESH_STEP); + disable_s2_shutdown = true; + } else { + chip->thresh = THRESH_MAX; + + if (!IS_ERR(chip->adc)) + disable_s2_shutdown = true; + else + dev_warn(chip->dev, + "No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140°C! Configuring stage 2 shutdown at 140°C.\n"); + } + +skip: + reg |= chip->thresh; + if (disable_s2_shutdown) + reg |= SHUTDOWN_CTRL1_OVERRIDE_S2; + + ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg); + if (ret < 0) + return ret; + + return ret; +} + +static int qpnp_tm_set_trip_temp(void *data, int trip, int temp) +{ + struct qpnp_tm_chip *chip = data; + const struct thermal_trip *trip_points; + int ret; + + trip_points = of_thermal_get_trip_points(chip->tz_dev); + if (!trip_points) + return -EINVAL; + + if (trip_points[trip].type != THERMAL_TRIP_CRITICAL) + return 0; + + mutex_lock(&chip->lock); + ret = qpnp_tm_update_critical_trip_temp(chip, temp); + mutex_unlock(&chip->lock); + + return ret; +} + static const struct thermal_zone_of_device_ops qpnp_tm_sensor_ops = { .get_temp = qpnp_tm_get_temp, + .set_trip_temp = qpnp_tm_set_trip_temp, }; static irqreturn_t qpnp_tm_isr(int irq, void *data) @@ -193,6 +284,29 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data) return IRQ_HANDLED; } +static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip) +{ + int ntrips; + const struct thermal_trip *trips; + int i; + + ntrips = of_thermal_get_ntrips(chip->tz_dev); + if (ntrips <= 0) + return THERMAL_TEMP_INVALID; + + trips = of_thermal_get_trip_points(chip->tz_dev); + if (!trips) + return THERMAL_TEMP_INVALID; + + for (i = 0; i < ntrips; i++) { + if (of_thermal_is_trip_valid(chip->tz_dev, i) && + (trips[i].type == THERMAL_TRIP_CRITICAL)) + return trips[i].temperature; + } + + return THERMAL_TEMP_INVALID; +} + /* * This function initializes the internal temp value based on only the * current thermal stage and threshold. Setup threshold control and @@ -203,17 +317,20 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip) unsigned int stage; int ret; u8 reg = 0; + int crit_temp; + + mutex_lock(&chip->lock); ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, &reg); if (ret < 0) - return ret; + goto out; chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK; chip->temp = DEFAULT_TEMP; ret = qpnp_tm_get_temp_stage(chip); if (ret < 0) - return ret; + goto out; chip->stage = ret; stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1 @@ -224,21 +341,17 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip) (stage - 1) * TEMP_STAGE_STEP + TEMP_THRESH_MIN; - /* - * Set threshold and disable software override of stage 2 and 3 - * shutdowns. - */ - chip->thresh = THRESH_MIN; - reg &= ~(SHUTDOWN_CTRL1_OVERRIDE_MASK | SHUTDOWN_CTRL1_THRESHOLD_MASK); - reg |= chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK; - ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg); + crit_temp = qpnp_tm_get_critical_trip_temp(chip); + ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp); if (ret < 0) - return ret; + goto out; /* Enable the thermal alarm PMIC module in always-on mode. */ reg = ALARM_CTRL_FORCE_ENABLE; ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg); +out: + mutex_unlock(&chip->lock); return ret; } @@ -257,6 +370,9 @@ static int qpnp_tm_probe(struct platform_device *pdev) return -ENOMEM; dev_set_drvdata(&pdev->dev, chip); + chip->dev = &pdev->dev; + + mutex_init(&chip->lock); chip->map = dev_get_regmap(pdev->dev.parent, NULL); if (!chip->map) @@ -302,6 +418,18 @@ static int qpnp_tm_probe(struct platform_device *pdev) chip->subtype = subtype; + /* + * Register the sensor before initializing the hardware to be able to + * read the trip points. get_temp() returns the default temperature + * before the hardware initialization is completed. + */ + chip->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, chip, + &qpnp_tm_sensor_ops); + if (IS_ERR(chip->tz_dev)) { + dev_err(&pdev->dev, "failed to register sensor\n"); + return PTR_ERR(chip->tz_dev); + } + ret = qpnp_tm_init(chip); if (ret < 0) { dev_err(&pdev->dev, "init failed\n"); @@ -313,12 +441,7 @@ static int qpnp_tm_probe(struct platform_device *pdev) if (ret < 0) return ret; - chip->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, chip, - &qpnp_tm_sensor_ops); - if (IS_ERR(chip->tz_dev)) { - dev_err(&pdev->dev, "failed to register sensor\n"); - return PTR_ERR(chip->tz_dev); - } + chip->initialized = true; return 0; }

[v5,1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points

Commit Message

Comments

Patch