| Message ID | 20180725073410.730-3-mylene.josserand@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | sun8i-a83t: Add touchscreen support on TBS A711 | expand |
Hi Mylène, On Wed, Jul 25, 2018 at 09:34:09AM +0200, Mylène Josserand wrote: > On resume and suspend, set the value of wake and reset gpios > to be sure that we are in a know state after suspending/resuming. > > Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com> > --- > drivers/input/touchscreen/edt-ft5x06.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c > index dcde719094f7..dad2f1f8bf89 100644 > --- a/drivers/input/touchscreen/edt-ft5x06.c > +++ b/drivers/input/touchscreen/edt-ft5x06.c > @@ -1158,6 +1158,12 @@ static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev) > else > regulator_disable(tsdata->vcc); > > + if (tsdata->wake_gpio) > + gpiod_set_value(tsdata->wake_gpio, 0); > + > + if (tsdata->reset_gpio) > + gpiod_set_value(tsdata->reset_gpio, 1); Ondřej mentioned in previous review that if you power off the controller it will not be able to wake up the system, and you had to move call to regulator_disable() into "else" branch of check whether the controller is a wakeup device. Guess what happens if you unconditionally put the device into reset state? Thanks.
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index dcde719094f7..dad2f1f8bf89 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -1158,6 +1158,12 @@ static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev) else regulator_disable(tsdata->vcc); + if (tsdata->wake_gpio) + gpiod_set_value(tsdata->wake_gpio, 0); + + if (tsdata->reset_gpio) + gpiod_set_value(tsdata->reset_gpio, 1); + return 0; } @@ -1177,6 +1183,12 @@ static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev) } } + if (tsdata->wake_gpio) + gpiod_set_value(tsdata->wake_gpio, 1); + + if (tsdata->reset_gpio) + gpiod_set_value(tsdata->reset_gpio, 0); + return 0; }
On resume and suspend, set the value of wake and reset gpios to be sure that we are in a know state after suspending/resuming. Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com> --- drivers/input/touchscreen/edt-ft5x06.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)