| Message ID | 1531131741-19971-7-git-send-email-kgunda@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 09/07/18 11:22, Kiran Gunda wrote: > WLED4 peripheral is present on some PMICs like pmi8998 and > pm660l. It has a different register map and configurations > are also different. Add support for it. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> > --- > Changes from V3: > - The WLED3 specific changes are splitted out > - Merged the wled3_sync_toggle and wled4_syn_toggle functions > - Modified the compatible .data > - Moved from if/else to switch/case to select the version specific data > - Addressed few more minor comments from Bjorn > > drivers/video/backlight/qcom-wled.c | 264 +++++++++++++++++++++++++++++++++++- > 1 file changed, 258 insertions(+), 6 deletions(-) > > diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c > index 87fc1d0..362d254 100644 > --- a/drivers/video/backlight/qcom-wled.c > +++ b/drivers/video/backlight/qcom-wled.c > @@ -64,6 +64,28 @@ > #define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10)) > #define WLED3_SINK_REG_STR_CABC_MASK BIT(7) > > +/* WLED4 specific sink registers */ > +#define WLED4_SINK_REG_CURR_SINK 0x46 > +#define WLED4_SINK_REG_CURR_SINK_MASK GENMASK(7, 4) > +#define WLED4_SINK_REG_CURR_SINK_SHFT 4 > + > +/* WLED4 specific per-'string' registers below */ > +#define WLED4_SINK_REG_STR_MOD_EN(n) (0x50 + (n * 0x10)) > +#define WLED4_SINK_REG_STR_MOD_MASK BIT(7) > + > +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR(n) (0x52 + (n * 0x10)) > +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(3, 0) > + > +#define WLED4_SINK_REG_STR_MOD_SRC(n) (0x53 + (n * 0x10)) > +#define WLED4_SINK_REG_STR_MOD_SRC_MASK BIT(0) > +#define WLED4_SINK_REG_STR_MOD_SRC_INT 0x00 > +#define WLED4_SINK_REG_STR_MOD_SRC_EXT 0x01 > + > +#define WLED4_SINK_REG_STR_CABC(n) (0x56 + (n * 0x10)) > +#define WLED4_SINK_REG_STR_CABC_MASK BIT(7) > + > +#define WLED4_SINK_REG_BRIGHT(n) (0x57 + (n * 0x10)) > + > struct wled_var_cfg { > const u32 *values; > u32 (*fn)(u32); > @@ -98,6 +120,7 @@ struct wled { > struct device *dev; > struct regmap *regmap; > u16 ctrl_addr; > + u16 sink_addr; > u16 max_string_count; > u32 brightness; > u32 max_brightness; > @@ -124,6 +147,29 @@ static int wled3_set_brightness(struct wled *wled, u16 brightness) > return 0; > } > > +static int wled4_set_brightness(struct wled *wled, u16 brightness) > +{ > + int rc, i; > + u16 low_limit = wled->max_brightness * 4 / 1000; > + u8 v[2]; > + > + /* WLED4's lower limit of operation is 0.4% */ > + if (brightness > 0 && brightness < low_limit) > + brightness = low_limit; > + > + v[0] = brightness & 0xff; > + v[1] = (brightness >> 8) & 0xf; > + > + for (i = 0; i < wled->cfg.num_strings; ++i) { > + rc = regmap_bulk_write(wled->regmap, wled->sink_addr + > + WLED4_SINK_REG_BRIGHT(i), v, 2); > + if (rc < 0) > + return rc; > + } > + > + return 0; > +} > + > static int wled_module_enable(struct wled *wled, int val) > { > int rc; > @@ -141,13 +187,13 @@ static int wled_sync_toggle(struct wled *wled) > unsigned int mask = GENMASK(wled->max_string_count - 1, 0); > > rc = regmap_update_bits(wled->regmap, > - wled->ctrl_addr + WLED_SINK_REG_SYNC, > + wled->sink_addr + WLED_SINK_REG_SYNC, > mask, mask); > if (rc < 0) > return rc; > > rc = regmap_update_bits(wled->regmap, > - wled->ctrl_addr + WLED_SINK_REG_SYNC, > + wled->sink_addr + WLED_SINK_REG_SYNC, > mask, WLED_SINK_REG_SYNC_CLEAR); > > return rc; > @@ -274,6 +320,120 @@ static int wled3_setup(struct wled *wled) > .cabc = false, > }; > > +static int wled4_setup(struct wled *wled) > +{ > + int rc, temp, i, j; > + u16 addr; > + u8 sink_en = 0; > + u32 sink_cfg = 0; > + > + rc = regmap_update_bits(wled->regmap, > + wled->ctrl_addr + WLED_CTRL_REG_OVP, > + WLED_CTRL_REG_OVP_MASK, wled->cfg.ovp); > + if (rc < 0) > + return rc; > + > + rc = regmap_update_bits(wled->regmap, > + wled->ctrl_addr + WLED_CTRL_REG_ILIMIT, > + WLED_CTRL_REG_ILIMIT_MASK, > + wled->cfg.boost_i_limit); > + if (rc < 0) > + return rc; > + > + rc = regmap_update_bits(wled->regmap, > + wled->ctrl_addr + WLED_CTRL_REG_FREQ, > + WLED_CTRL_REG_FREQ_MASK, > + wled->cfg.switch_freq); > + if (rc < 0) > + return rc; > + > + rc = regmap_read(wled->regmap, wled->sink_addr + > + WLED4_SINK_REG_CURR_SINK, &sink_cfg); > + if (rc < 0) > + return rc; > + > + for (i = 0; i < wled->cfg.num_strings; i++) { > + j = wled->cfg.enabled_strings[i]; > + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT; > + sink_en |= 1 << temp; > + } > + > + if (sink_cfg == sink_en) > + return 0; > + > + rc = regmap_update_bits(wled->regmap, > + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, > + WLED4_SINK_REG_CURR_SINK_MASK, 0); > + if (rc < 0) > + return rc; > + > + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + > + WLED_CTRL_REG_MOD_EN, > + WLED_CTRL_REG_MOD_EN_MASK, 0); > + if (rc < 0) > + return rc; > + > + /* Per sink/string configuration */ > + for (i = 0; i < wled->cfg.num_strings; i++) { > + j = wled->cfg.enabled_strings[i]; > + > + addr = wled->sink_addr + > + WLED4_SINK_REG_STR_MOD_EN(j); > + rc = regmap_update_bits(wled->regmap, addr, > + WLED4_SINK_REG_STR_MOD_MASK, > + WLED4_SINK_REG_STR_MOD_MASK); > + if (rc < 0) > + return rc; > + > + addr = wled->sink_addr + > + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j); > + rc = regmap_update_bits(wled->regmap, addr, > + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK, > + wled->cfg.string_i_limit); > + if (rc < 0) > + return rc; > + > + addr = wled->sink_addr + > + WLED4_SINK_REG_STR_CABC(j); > + rc = regmap_update_bits(wled->regmap, addr, > + WLED4_SINK_REG_STR_CABC_MASK, > + wled->cfg.cabc ? > + WLED4_SINK_REG_STR_CABC_MASK : 0); > + if (rc < 0) > + return rc; > + } > + > + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + > + WLED_CTRL_REG_MOD_EN, > + WLED_CTRL_REG_MOD_EN_MASK, > + WLED_CTRL_REG_MOD_EN_MASK); > + if (rc < 0) > + return rc; > + > + rc = regmap_update_bits(wled->regmap, > + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, > + WLED4_SINK_REG_CURR_SINK_MASK, sink_en); > + if (rc < 0) > + return rc; > + > + rc = wled_sync_toggle(wled); > + if (rc < 0) { > + dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc); > + return rc; > + } > + > + return 0; > +} > + > +static const struct wled_config wled4_config_defaults = { > + .boost_i_limit = 4, > + .string_i_limit = 10, > + .ovp = 1, > + .num_strings = 4, > + .switch_freq = 11, > + .cabc = false, > +}; > + > static const u32 wled3_boost_i_limit_values[] = { > 105, 385, 525, 805, 980, 1260, 1400, 1680, > }; > @@ -283,6 +443,15 @@ static int wled3_setup(struct wled *wled) > .size = ARRAY_SIZE(wled3_boost_i_limit_values), > }; > > +static const u32 wled4_boost_i_limit_values[] = { > + 105, 280, 450, 620, 970, 1150, 1300, 1500, > +}; > + > +static const struct wled_var_cfg wled4_boost_i_limit_cfg = { > + .values = wled4_boost_i_limit_values, > + .size = ARRAY_SIZE(wled4_boost_i_limit_values), > +}; > + > static const u32 wled3_ovp_values[] = { > 35, 32, 29, 27, > }; > @@ -292,6 +461,15 @@ static int wled3_setup(struct wled *wled) > .size = ARRAY_SIZE(wled3_ovp_values), > }; > > +static const u32 wled4_ovp_values[] = { > + 31100, 29600, 19600, 18100, > +}; > + > +static const struct wled_var_cfg wled4_ovp_cfg = { > + .values = wled4_ovp_values, > + .size = ARRAY_SIZE(wled4_ovp_values), > +}; > + > static u32 wled3_num_strings_values_fn(u32 idx) > { > return idx + 1; > @@ -302,6 +480,11 @@ static u32 wled3_num_strings_values_fn(u32 idx) > .size = 3, > }; > > +static const struct wled_var_cfg wled4_num_strings_cfg = { > + .fn = wled3_num_strings_values_fn, > + .size = 4, > +}; > + > static u32 wled3_switch_freq_values_fn(u32 idx) > { > return 19200 / (2 * (1 + idx)); > @@ -316,10 +499,24 @@ static u32 wled3_switch_freq_values_fn(u32 idx) > .size = 26, > }; > > +static const u32 wled4_string_i_limit_values[] = { > + 0, 2500, 5000, 7500, 10000, 12500, 15000, 17500, 20000, > + 22500, 25000, 27500, 30000, > +}; > + > +static const struct wled_var_cfg wled4_string_i_limit_cfg = { > + .values = wled4_string_i_limit_values, > + .size = ARRAY_SIZE(wled4_string_i_limit_values), > +}; > + > static const struct wled_var_cfg wled3_string_cfg = { > .size = 8, > }; > > +static const struct wled_var_cfg wled4_string_cfg = { > + .size = 16, > +}; > + > static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) > { > if (idx >= cfg->size) > @@ -332,6 +529,7 @@ static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) > } > > #define WLED3 3 > +#define WLED4 4 Are these macros always going to define 3 to be 3 and 4 to be 4. If so we probably don't need them (and they should be removed from patch 5/8 too). There is a degree of nitpicking here however. The rest looks OK to me. Daniel. -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi! > >@@ -332,6 +529,7 @@ static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) > > } > > #define WLED3 3 > >+#define WLED4 4 > > Are these macros always going to define 3 to be 3 and 4 to be 4. If so we > probably don't need them (and they should be removed from patch 5/8 too). > > There is a degree of nitpicking here however. The rest looks OK to me. Really nitpicking, and I don't care much either way, but as natural numbering would be 0-based, I'd keep the defines. Pavel
On 2018-07-21 02:51, Pavel Machek wrote: > Hi! > >> >@@ -332,6 +529,7 @@ static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) >> > } >> > #define WLED3 3 >> >+#define WLED4 4 >> >> Are these macros always going to define 3 to be 3 and 4 to be 4. If so >> we >> probably don't need them (and they should be removed from patch 5/8 >> too). >> >> There is a degree of nitpicking here however. The rest looks OK to me. > > Really nitpicking, and I don't care much either way, but as natural > numbering would be 0-based, I'd keep the defines. > Pavel Thanks Pavale/Daniel! I will remove the macros and use the number 3 and 4 instead. -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon 09 Jul 03:22 PDT 2018, Kiran Gunda wrote: > WLED4 peripheral is present on some PMICs like pmi8998 and > pm660l. It has a different register map and configurations > are also different. Add support for it. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > Changes from V3: > - The WLED3 specific changes are splitted out > - Merged the wled3_sync_toggle and wled4_syn_toggle functions > - Modified the compatible .data > - Moved from if/else to switch/case to select the version specific data > - Addressed few more minor comments from Bjorn > > drivers/video/backlight/qcom-wled.c | 264 +++++++++++++++++++++++++++++++++++- > 1 file changed, 258 insertions(+), 6 deletions(-) > > diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c > index 87fc1d0..362d254 100644 > --- a/drivers/video/backlight/qcom-wled.c > +++ b/drivers/video/backlight/qcom-wled.c > @@ -64,6 +64,28 @@ > #define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10)) > #define WLED3_SINK_REG_STR_CABC_MASK BIT(7) > > +/* WLED4 specific sink registers */ > +#define WLED4_SINK_REG_CURR_SINK 0x46 > +#define WLED4_SINK_REG_CURR_SINK_MASK GENMASK(7, 4) > +#define WLED4_SINK_REG_CURR_SINK_SHFT 4 > + > +/* WLED4 specific per-'string' registers below */ > +#define WLED4_SINK_REG_STR_MOD_EN(n) (0x50 + (n * 0x10)) > +#define WLED4_SINK_REG_STR_MOD_MASK BIT(7) > + > +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR(n) (0x52 + (n * 0x10)) > +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(3, 0) > + > +#define WLED4_SINK_REG_STR_MOD_SRC(n) (0x53 + (n * 0x10)) > +#define WLED4_SINK_REG_STR_MOD_SRC_MASK BIT(0) > +#define WLED4_SINK_REG_STR_MOD_SRC_INT 0x00 > +#define WLED4_SINK_REG_STR_MOD_SRC_EXT 0x01 > + > +#define WLED4_SINK_REG_STR_CABC(n) (0x56 + (n * 0x10)) > +#define WLED4_SINK_REG_STR_CABC_MASK BIT(7) > + > +#define WLED4_SINK_REG_BRIGHT(n) (0x57 + (n * 0x10)) > + > struct wled_var_cfg { > const u32 *values; > u32 (*fn)(u32); > @@ -98,6 +120,7 @@ struct wled { > struct device *dev; > struct regmap *regmap; > u16 ctrl_addr; > + u16 sink_addr; > u16 max_string_count; > u32 brightness; > u32 max_brightness; > @@ -124,6 +147,29 @@ static int wled3_set_brightness(struct wled *wled, u16 brightness) > return 0; > } > > +static int wled4_set_brightness(struct wled *wled, u16 brightness) > +{ > + int rc, i; > + u16 low_limit = wled->max_brightness * 4 / 1000; > + u8 v[2]; > + > + /* WLED4's lower limit of operation is 0.4% */ > + if (brightness > 0 && brightness < low_limit) > + brightness = low_limit; > + > + v[0] = brightness & 0xff; > + v[1] = (brightness >> 8) & 0xf; > + > + for (i = 0; i < wled->cfg.num_strings; ++i) { > + rc = regmap_bulk_write(wled->regmap, wled->sink_addr + > + WLED4_SINK_REG_BRIGHT(i), v, 2); > + if (rc < 0) > + return rc; > + } > + > + return 0; > +} > + > static int wled_module_enable(struct wled *wled, int val) > { > int rc; > @@ -141,13 +187,13 @@ static int wled_sync_toggle(struct wled *wled) > unsigned int mask = GENMASK(wled->max_string_count - 1, 0); > > rc = regmap_update_bits(wled->regmap, > - wled->ctrl_addr + WLED_SINK_REG_SYNC, > + wled->sink_addr + WLED_SINK_REG_SYNC, > mask, mask); > if (rc < 0) > return rc; > > rc = regmap_update_bits(wled->regmap, > - wled->ctrl_addr + WLED_SINK_REG_SYNC, > + wled->sink_addr + WLED_SINK_REG_SYNC, > mask, WLED_SINK_REG_SYNC_CLEAR); > > return rc; > @@ -274,6 +320,120 @@ static int wled3_setup(struct wled *wled) > .cabc = false, > }; > > +static int wled4_setup(struct wled *wled) > +{ > + int rc, temp, i, j; > + u16 addr; > + u8 sink_en = 0; > + u32 sink_cfg = 0; > + > + rc = regmap_update_bits(wled->regmap, > + wled->ctrl_addr + WLED_CTRL_REG_OVP, > + WLED_CTRL_REG_OVP_MASK, wled->cfg.ovp); > + if (rc < 0) > + return rc; > + > + rc = regmap_update_bits(wled->regmap, > + wled->ctrl_addr + WLED_CTRL_REG_ILIMIT, > + WLED_CTRL_REG_ILIMIT_MASK, > + wled->cfg.boost_i_limit); > + if (rc < 0) > + return rc; > + > + rc = regmap_update_bits(wled->regmap, > + wled->ctrl_addr + WLED_CTRL_REG_FREQ, > + WLED_CTRL_REG_FREQ_MASK, > + wled->cfg.switch_freq); > + if (rc < 0) > + return rc; > + > + rc = regmap_read(wled->regmap, wled->sink_addr + > + WLED4_SINK_REG_CURR_SINK, &sink_cfg); > + if (rc < 0) > + return rc; > + > + for (i = 0; i < wled->cfg.num_strings; i++) { > + j = wled->cfg.enabled_strings[i]; > + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT; > + sink_en |= 1 << temp; > + } > + > + if (sink_cfg == sink_en) > + return 0; > + > + rc = regmap_update_bits(wled->regmap, > + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, > + WLED4_SINK_REG_CURR_SINK_MASK, 0); > + if (rc < 0) > + return rc; > + > + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + > + WLED_CTRL_REG_MOD_EN, > + WLED_CTRL_REG_MOD_EN_MASK, 0); > + if (rc < 0) > + return rc; > + > + /* Per sink/string configuration */ > + for (i = 0; i < wled->cfg.num_strings; i++) { > + j = wled->cfg.enabled_strings[i]; > + > + addr = wled->sink_addr + > + WLED4_SINK_REG_STR_MOD_EN(j); > + rc = regmap_update_bits(wled->regmap, addr, > + WLED4_SINK_REG_STR_MOD_MASK, > + WLED4_SINK_REG_STR_MOD_MASK); > + if (rc < 0) > + return rc; > + > + addr = wled->sink_addr + > + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j); > + rc = regmap_update_bits(wled->regmap, addr, > + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK, > + wled->cfg.string_i_limit); > + if (rc < 0) > + return rc; > + > + addr = wled->sink_addr + > + WLED4_SINK_REG_STR_CABC(j); > + rc = regmap_update_bits(wled->regmap, addr, > + WLED4_SINK_REG_STR_CABC_MASK, > + wled->cfg.cabc ? > + WLED4_SINK_REG_STR_CABC_MASK : 0); > + if (rc < 0) > + return rc; > + } > + > + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + > + WLED_CTRL_REG_MOD_EN, > + WLED_CTRL_REG_MOD_EN_MASK, > + WLED_CTRL_REG_MOD_EN_MASK); > + if (rc < 0) > + return rc; > + > + rc = regmap_update_bits(wled->regmap, > + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, > + WLED4_SINK_REG_CURR_SINK_MASK, sink_en); > + if (rc < 0) > + return rc; > + > + rc = wled_sync_toggle(wled); > + if (rc < 0) { > + dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc); > + return rc; > + } > + > + return 0; > +} > + > +static const struct wled_config wled4_config_defaults = { > + .boost_i_limit = 4, > + .string_i_limit = 10, > + .ovp = 1, > + .num_strings = 4, > + .switch_freq = 11, > + .cabc = false, > +}; > + > static const u32 wled3_boost_i_limit_values[] = { > 105, 385, 525, 805, 980, 1260, 1400, 1680, > }; > @@ -283,6 +443,15 @@ static int wled3_setup(struct wled *wled) > .size = ARRAY_SIZE(wled3_boost_i_limit_values), > }; > > +static const u32 wled4_boost_i_limit_values[] = { > + 105, 280, 450, 620, 970, 1150, 1300, 1500, > +}; > + > +static const struct wled_var_cfg wled4_boost_i_limit_cfg = { > + .values = wled4_boost_i_limit_values, > + .size = ARRAY_SIZE(wled4_boost_i_limit_values), > +}; > + > static const u32 wled3_ovp_values[] = { > 35, 32, 29, 27, > }; > @@ -292,6 +461,15 @@ static int wled3_setup(struct wled *wled) > .size = ARRAY_SIZE(wled3_ovp_values), > }; > > +static const u32 wled4_ovp_values[] = { > + 31100, 29600, 19600, 18100, > +}; > + > +static const struct wled_var_cfg wled4_ovp_cfg = { > + .values = wled4_ovp_values, > + .size = ARRAY_SIZE(wled4_ovp_values), > +}; > + > static u32 wled3_num_strings_values_fn(u32 idx) > { > return idx + 1; > @@ -302,6 +480,11 @@ static u32 wled3_num_strings_values_fn(u32 idx) > .size = 3, > }; > > +static const struct wled_var_cfg wled4_num_strings_cfg = { > + .fn = wled3_num_strings_values_fn, > + .size = 4, > +}; > + > static u32 wled3_switch_freq_values_fn(u32 idx) > { > return 19200 / (2 * (1 + idx)); > @@ -316,10 +499,24 @@ static u32 wled3_switch_freq_values_fn(u32 idx) > .size = 26, > }; > > +static const u32 wled4_string_i_limit_values[] = { > + 0, 2500, 5000, 7500, 10000, 12500, 15000, 17500, 20000, > + 22500, 25000, 27500, 30000, > +}; > + > +static const struct wled_var_cfg wled4_string_i_limit_cfg = { > + .values = wled4_string_i_limit_values, > + .size = ARRAY_SIZE(wled4_string_i_limit_values), > +}; > + > static const struct wled_var_cfg wled3_string_cfg = { > .size = 8, > }; > > +static const struct wled_var_cfg wled4_string_cfg = { > + .size = 16, > +}; > + > static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) > { > if (idx >= cfg->size) > @@ -332,6 +529,7 @@ static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) > } > > #define WLED3 3 > +#define WLED4 4 > > static int wled_configure(struct wled *wled, int version) > { > @@ -370,6 +568,34 @@ static int wled_configure(struct wled *wled, int version) > }, > }; > > + const struct wled_u32_opts wled4_opts[] = { > + { > + .name = "qcom,current-boost-limit", > + .val_ptr = &cfg->boost_i_limit, > + .cfg = &wled4_boost_i_limit_cfg, > + }, > + { > + .name = "qcom,current-limit-microamp", > + .val_ptr = &cfg->string_i_limit, > + .cfg = &wled4_string_i_limit_cfg, > + }, > + { > + .name = "qcom,ovp-millivolt", > + .val_ptr = &cfg->ovp, > + .cfg = &wled4_ovp_cfg, > + }, > + { > + .name = "qcom,switching-freq", > + .val_ptr = &cfg->switch_freq, > + .cfg = &wled3_switch_freq_cfg, > + }, > + { > + .name = "qcom,num-strings", > + .val_ptr = &cfg->num_strings, > + .cfg = &wled4_num_strings_cfg, > + }, > + }; > + > const struct wled_bool_opts bool_opts[] = { > { "qcom,cs-out", &cfg->cs_out_en, }, > { "qcom,ext-gen", &cfg->ext_gen, }, > @@ -383,10 +609,6 @@ static int wled_configure(struct wled *wled, int version) > } > wled->ctrl_addr = be32_to_cpu(*prop_addr); > > - rc = of_property_read_string(dev->of_node, "label", &wled->name); > - if (rc) > - wled->name = dev->of_node->name; > - > switch (version) { > case WLED3: > u32_opts = wled3_opts; > @@ -394,6 +616,22 @@ static int wled_configure(struct wled *wled, int version) > *cfg = wled3_config_defaults; > wled->wled_set_brightness = wled3_set_brightness; > wled->max_string_count = 3; > + wled->sink_addr = wled->ctrl_addr; > + break; > + > + case WLED4: > + u32_opts = wled4_opts; > + size = ARRAY_SIZE(wled4_opts); > + *cfg = wled4_config_defaults; > + wled->wled_set_brightness = wled4_set_brightness; > + wled->max_string_count = 4; > + > + prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); > + if (!prop_addr) { > + dev_err(wled->dev, "invalid IO resources\n"); > + return -EINVAL; > + } > + wled->sink_addr = be32_to_cpu(*prop_addr); > break; > > default: > @@ -401,6 +639,10 @@ static int wled_configure(struct wled *wled, int version) > break; > } > > + rc = of_property_read_string(dev->of_node, "label", &wled->name); > + if (rc) > + wled->name = dev->of_node->name; > + > for (i = 0; i < size; ++i) { > rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); > if (rc == -EINVAL) { > @@ -492,6 +734,14 @@ static int wled_probe(struct platform_device *pdev) > } > break; > > + case WLED4: > + rc = wled4_setup(wled); > + if (rc) { > + dev_err(&pdev->dev, "wled4_setup failed\n"); > + return rc; > + } > + break; > + > default: > dev_err(wled->dev, "Invalid WLED version\n"); > break; > @@ -512,6 +762,8 @@ static int wled_probe(struct platform_device *pdev) > > static const struct of_device_id wled_match_table[] = { > { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, > + { .compatible = "qcom,pmi8998-wled", .data = (void *)4 }, > + { .compatible = "qcom,pm660l-wled", .data = (void *)4 }, > {} > }; > MODULE_DEVICE_TABLE(of, wled_match_table); > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project > -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 87fc1d0..362d254 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -64,6 +64,28 @@ #define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10)) #define WLED3_SINK_REG_STR_CABC_MASK BIT(7) +/* WLED4 specific sink registers */ +#define WLED4_SINK_REG_CURR_SINK 0x46 +#define WLED4_SINK_REG_CURR_SINK_MASK GENMASK(7, 4) +#define WLED4_SINK_REG_CURR_SINK_SHFT 4 + +/* WLED4 specific per-'string' registers below */ +#define WLED4_SINK_REG_STR_MOD_EN(n) (0x50 + (n * 0x10)) +#define WLED4_SINK_REG_STR_MOD_MASK BIT(7) + +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR(n) (0x52 + (n * 0x10)) +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(3, 0) + +#define WLED4_SINK_REG_STR_MOD_SRC(n) (0x53 + (n * 0x10)) +#define WLED4_SINK_REG_STR_MOD_SRC_MASK BIT(0) +#define WLED4_SINK_REG_STR_MOD_SRC_INT 0x00 +#define WLED4_SINK_REG_STR_MOD_SRC_EXT 0x01 + +#define WLED4_SINK_REG_STR_CABC(n) (0x56 + (n * 0x10)) +#define WLED4_SINK_REG_STR_CABC_MASK BIT(7) + +#define WLED4_SINK_REG_BRIGHT(n) (0x57 + (n * 0x10)) + struct wled_var_cfg { const u32 *values; u32 (*fn)(u32); @@ -98,6 +120,7 @@ struct wled { struct device *dev; struct regmap *regmap; u16 ctrl_addr; + u16 sink_addr; u16 max_string_count; u32 brightness; u32 max_brightness; @@ -124,6 +147,29 @@ static int wled3_set_brightness(struct wled *wled, u16 brightness) return 0; } +static int wled4_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, i; + u16 low_limit = wled->max_brightness * 4 / 1000; + u8 v[2]; + + /* WLED4's lower limit of operation is 0.4% */ + if (brightness > 0 && brightness < low_limit) + brightness = low_limit; + + v[0] = brightness & 0xff; + v[1] = (brightness >> 8) & 0xf; + + for (i = 0; i < wled->cfg.num_strings; ++i) { + rc = regmap_bulk_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_BRIGHT(i), v, 2); + if (rc < 0) + return rc; + } + + return 0; +} + static int wled_module_enable(struct wled *wled, int val) { int rc; @@ -141,13 +187,13 @@ static int wled_sync_toggle(struct wled *wled) unsigned int mask = GENMASK(wled->max_string_count - 1, 0); rc = regmap_update_bits(wled->regmap, - wled->ctrl_addr + WLED_SINK_REG_SYNC, + wled->sink_addr + WLED_SINK_REG_SYNC, mask, mask); if (rc < 0) return rc; rc = regmap_update_bits(wled->regmap, - wled->ctrl_addr + WLED_SINK_REG_SYNC, + wled->sink_addr + WLED_SINK_REG_SYNC, mask, WLED_SINK_REG_SYNC_CLEAR); return rc; @@ -274,6 +320,120 @@ static int wled3_setup(struct wled *wled) .cabc = false, }; +static int wled4_setup(struct wled *wled) +{ + int rc, temp, i, j; + u16 addr; + u8 sink_en = 0; + u32 sink_cfg = 0; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED_CTRL_REG_OVP, + WLED_CTRL_REG_OVP_MASK, wled->cfg.ovp); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED_CTRL_REG_ILIMIT, + WLED_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED_CTRL_REG_FREQ, + WLED_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); + if (rc < 0) + return rc; + + rc = regmap_read(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_CURR_SINK, &sink_cfg); + if (rc < 0) + return rc; + + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT; + sink_en |= 1 << temp; + } + + if (sink_cfg == sink_en) + return 0; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, 0); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED_CTRL_REG_MOD_EN, + WLED_CTRL_REG_MOD_EN_MASK, 0); + if (rc < 0) + return rc; + + /* Per sink/string configuration */ + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + + addr = wled->sink_addr + + WLED4_SINK_REG_STR_MOD_EN(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_MOD_MASK, + WLED4_SINK_REG_STR_MOD_MASK); + if (rc < 0) + return rc; + + addr = wled->sink_addr + + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); + if (rc < 0) + return rc; + + addr = wled->sink_addr + + WLED4_SINK_REG_STR_CABC(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_CABC_MASK, + wled->cfg.cabc ? + WLED4_SINK_REG_STR_CABC_MASK : 0); + if (rc < 0) + return rc; + } + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED_CTRL_REG_MOD_EN, + WLED_CTRL_REG_MOD_EN_MASK, + WLED_CTRL_REG_MOD_EN_MASK); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc < 0) + return rc; + + rc = wled_sync_toggle(wled); + if (rc < 0) { + dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc); + return rc; + } + + return 0; +} + +static const struct wled_config wled4_config_defaults = { + .boost_i_limit = 4, + .string_i_limit = 10, + .ovp = 1, + .num_strings = 4, + .switch_freq = 11, + .cabc = false, +}; + static const u32 wled3_boost_i_limit_values[] = { 105, 385, 525, 805, 980, 1260, 1400, 1680, }; @@ -283,6 +443,15 @@ static int wled3_setup(struct wled *wled) .size = ARRAY_SIZE(wled3_boost_i_limit_values), }; +static const u32 wled4_boost_i_limit_values[] = { + 105, 280, 450, 620, 970, 1150, 1300, 1500, +}; + +static const struct wled_var_cfg wled4_boost_i_limit_cfg = { + .values = wled4_boost_i_limit_values, + .size = ARRAY_SIZE(wled4_boost_i_limit_values), +}; + static const u32 wled3_ovp_values[] = { 35, 32, 29, 27, }; @@ -292,6 +461,15 @@ static int wled3_setup(struct wled *wled) .size = ARRAY_SIZE(wled3_ovp_values), }; +static const u32 wled4_ovp_values[] = { + 31100, 29600, 19600, 18100, +}; + +static const struct wled_var_cfg wled4_ovp_cfg = { + .values = wled4_ovp_values, + .size = ARRAY_SIZE(wled4_ovp_values), +}; + static u32 wled3_num_strings_values_fn(u32 idx) { return idx + 1; @@ -302,6 +480,11 @@ static u32 wled3_num_strings_values_fn(u32 idx) .size = 3, }; +static const struct wled_var_cfg wled4_num_strings_cfg = { + .fn = wled3_num_strings_values_fn, + .size = 4, +}; + static u32 wled3_switch_freq_values_fn(u32 idx) { return 19200 / (2 * (1 + idx)); @@ -316,10 +499,24 @@ static u32 wled3_switch_freq_values_fn(u32 idx) .size = 26, }; +static const u32 wled4_string_i_limit_values[] = { + 0, 2500, 5000, 7500, 10000, 12500, 15000, 17500, 20000, + 22500, 25000, 27500, 30000, +}; + +static const struct wled_var_cfg wled4_string_i_limit_cfg = { + .values = wled4_string_i_limit_values, + .size = ARRAY_SIZE(wled4_string_i_limit_values), +}; + static const struct wled_var_cfg wled3_string_cfg = { .size = 8, }; +static const struct wled_var_cfg wled4_string_cfg = { + .size = 16, +}; + static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) { if (idx >= cfg->size) @@ -332,6 +529,7 @@ static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) } #define WLED3 3 +#define WLED4 4 static int wled_configure(struct wled *wled, int version) { @@ -370,6 +568,34 @@ static int wled_configure(struct wled *wled, int version) }, }; + const struct wled_u32_opts wled4_opts[] = { + { + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, + .cfg = &wled4_boost_i_limit_cfg, + }, + { + .name = "qcom,current-limit-microamp", + .val_ptr = &cfg->string_i_limit, + .cfg = &wled4_string_i_limit_cfg, + }, + { + .name = "qcom,ovp-millivolt", + .val_ptr = &cfg->ovp, + .cfg = &wled4_ovp_cfg, + }, + { + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, + .cfg = &wled3_switch_freq_cfg, + }, + { + .name = "qcom,num-strings", + .val_ptr = &cfg->num_strings, + .cfg = &wled4_num_strings_cfg, + }, + }; + const struct wled_bool_opts bool_opts[] = { { "qcom,cs-out", &cfg->cs_out_en, }, { "qcom,ext-gen", &cfg->ext_gen, }, @@ -383,10 +609,6 @@ static int wled_configure(struct wled *wled, int version) } wled->ctrl_addr = be32_to_cpu(*prop_addr); - rc = of_property_read_string(dev->of_node, "label", &wled->name); - if (rc) - wled->name = dev->of_node->name; - switch (version) { case WLED3: u32_opts = wled3_opts; @@ -394,6 +616,22 @@ static int wled_configure(struct wled *wled, int version) *cfg = wled3_config_defaults; wled->wled_set_brightness = wled3_set_brightness; wled->max_string_count = 3; + wled->sink_addr = wled->ctrl_addr; + break; + + case WLED4: + u32_opts = wled4_opts; + size = ARRAY_SIZE(wled4_opts); + *cfg = wled4_config_defaults; + wled->wled_set_brightness = wled4_set_brightness; + wled->max_string_count = 4; + + prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; + } + wled->sink_addr = be32_to_cpu(*prop_addr); break; default: @@ -401,6 +639,10 @@ static int wled_configure(struct wled *wled, int version) break; } + rc = of_property_read_string(dev->of_node, "label", &wled->name); + if (rc) + wled->name = dev->of_node->name; + for (i = 0; i < size; ++i) { rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); if (rc == -EINVAL) { @@ -492,6 +734,14 @@ static int wled_probe(struct platform_device *pdev) } break; + case WLED4: + rc = wled4_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled4_setup failed\n"); + return rc; + } + break; + default: dev_err(wled->dev, "Invalid WLED version\n"); break; @@ -512,6 +762,8 @@ static int wled_probe(struct platform_device *pdev) static const struct of_device_id wled_match_table[] = { { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, + { .compatible = "qcom,pmi8998-wled", .data = (void *)4 }, + { .compatible = "qcom,pm660l-wled", .data = (void *)4 }, {} }; MODULE_DEVICE_TABLE(of, wled_match_table);
WLED4 peripheral is present on some PMICs like pmi8998 and pm660l. It has a different register map and configurations are also different. Add support for it. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> --- Changes from V3: - The WLED3 specific changes are splitted out - Merged the wled3_sync_toggle and wled4_syn_toggle functions - Modified the compatible .data - Moved from if/else to switch/case to select the version specific data - Addressed few more minor comments from Bjorn drivers/video/backlight/qcom-wled.c | 264 +++++++++++++++++++++++++++++++++++- 1 file changed, 258 insertions(+), 6 deletions(-)