| Message ID | f3bdc0b9f98f834e2b420f737a0cec075c2c450d.1533815718.git.amit.kucheria@linaro.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Andy Gross |
| Headers | show |
| Series | Another round of tsens cleanups | expand |
On Thu, Aug 09, 2018 at 06:02:37PM +0530, Amit Kucheria wrote: > The TSENS driver currently only uses a limited set of registers from the TM > address space. So it was ok to map just that set of registers and call it > "map". > > We'd now like to map a second set: SROT registers to introduce new > functionality. Rename the "map" field to a more appropriate "tm_map". > > The 8960 doesn't have a clear split between TM and SROT registers. To avoid > complicating the data structure, it will switchover to using tm_map for its > maps. > > There is no functional change with this patch. > > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> > --- > drivers/thermal/qcom/tsens-8960.c | 30 ++++++++++++++--------------- > drivers/thermal/qcom/tsens-common.c | 17 ++++++++-------- > drivers/thermal/qcom/tsens-v2.c | 6 +++--- > drivers/thermal/qcom/tsens.h | 2 +- > 4 files changed, 27 insertions(+), 28 deletions(-) > > diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c > index 4af76de7dc2e..0f0adb302a7b 100644 > --- a/drivers/thermal/qcom/tsens-8960.c > +++ b/drivers/thermal/qcom/tsens-8960.c > @@ -60,7 +60,7 @@ static int suspend_8960(struct tsens_device *tmdev) > { > int ret; > unsigned int mask; > - struct regmap *map = tmdev->map; > + struct regmap *map = tmdev->tm_map; > > ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold); > if (ret) > @@ -85,7 +85,7 @@ static int suspend_8960(struct tsens_device *tmdev) > static int resume_8960(struct tsens_device *tmdev) > { > int ret; > - struct regmap *map = tmdev->map; > + struct regmap *map = tmdev->tm_map; > > ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); > if (ret) > @@ -117,12 +117,12 @@ static int enable_8960(struct tsens_device *tmdev, int id) > int ret; > u32 reg, mask; > > - ret = regmap_read(tmdev->map, CNTL_ADDR, ®); > + ret = regmap_read(tmdev->tm_map, CNTL_ADDR, ®); > if (ret) > return ret; > > mask = BIT(id + SENSOR0_SHIFT); > - ret = regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST); > + ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg | SW_RST); > if (ret) > return ret; > > @@ -131,7 +131,7 @@ static int enable_8960(struct tsens_device *tmdev, int id) > else > reg |= mask | SLP_CLK_ENA_8660 | EN; > > - ret = regmap_write(tmdev->map, CNTL_ADDR, reg); > + ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg); > if (ret) > return ret; > > @@ -148,7 +148,7 @@ static void disable_8960(struct tsens_device *tmdev) > mask <<= SENSOR0_SHIFT; > mask |= EN; > > - ret = regmap_read(tmdev->map, CNTL_ADDR, ®_cntl); > + ret = regmap_read(tmdev->tm_map, CNTL_ADDR, ®_cntl); > if (ret) > return; > > @@ -159,7 +159,7 @@ static void disable_8960(struct tsens_device *tmdev) > else > reg_cntl &= ~SLP_CLK_ENA_8660; > > - regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); > + regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl); > } > > static int init_8960(struct tsens_device *tmdev) > @@ -167,8 +167,8 @@ static int init_8960(struct tsens_device *tmdev) > int ret, i; > u32 reg_cntl; > > - tmdev->map = dev_get_regmap(tmdev->dev, NULL); > - if (!tmdev->map) > + tmdev->tm_map = dev_get_regmap(tmdev->dev, NULL); > + if (!tmdev->tm_map) > return -ENODEV; > > /* > @@ -184,14 +184,14 @@ static int init_8960(struct tsens_device *tmdev) > } > > reg_cntl = SW_RST; > - ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl); > + ret = regmap_update_bits(tmdev->tm_map, CNTL_ADDR, SW_RST, reg_cntl); > if (ret) > return ret; > > if (tmdev->num_sensors > 1) { > reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); > reg_cntl &= ~SW_RST; > - ret = regmap_update_bits(tmdev->map, CONFIG_ADDR, > + ret = regmap_update_bits(tmdev->tm_map, CONFIG_ADDR, > CONFIG_MASK, CONFIG); > } else { > reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16); > @@ -200,12 +200,12 @@ static int init_8960(struct tsens_device *tmdev) > } > > reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT; > - ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); > + ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl); > if (ret) > return ret; > > reg_cntl |= EN; > - ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); > + ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl); > if (ret) > return ret; > > @@ -252,12 +252,12 @@ static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp) > > timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); > do { > - ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy); > + ret = regmap_read(tmdev->tm_map, INT_STATUS_ADDR, &trdy); > if (ret) > return ret; > if (!(trdy & TRDY_MASK)) > continue; > - ret = regmap_read(tmdev->map, s->status, &code); > + ret = regmap_read(tmdev->tm_map, s->status, &code); > if (ret) > return ret; > *temp = code_to_mdegC(code, s); > diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c > index 303e3fdaca98..0585084630b3 100644 > --- a/drivers/thermal/qcom/tsens-common.c > +++ b/drivers/thermal/qcom/tsens-common.c > @@ -99,8 +99,7 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp) > int last_temp = 0, ret; > > status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * SN_ADDR_OFFSET; > - ret = regmap_read(tmdev->map, status_reg, &code); > - > + ret = regmap_read(tmdev->tm_map, status_reg, &code); > if (ret) > return ret; > last_temp = code & SN_ST_TEMP_MASK; > @@ -118,7 +117,7 @@ static const struct regmap_config tsens_config = { > > int __init init_common(struct tsens_device *tmdev) > { > - void __iomem *base; > + void __iomem *tm_base; > struct resource *res; > struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node); > > @@ -134,13 +133,13 @@ int __init init_common(struct tsens_device *tmdev) > } > > res = platform_get_resource(op, IORESOURCE_MEM, 0); > - base = devm_ioremap_resource(&op->dev, res); > - if (IS_ERR(base)) > - return PTR_ERR(base); > + tm_base = devm_ioremap_resource(&op->dev, res); > + if (IS_ERR(tm_base)) > + return PTR_ERR(tm_base); > > - tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config); > - if (IS_ERR(tmdev->map)) > - return PTR_ERR(tmdev->map); > + tmdev->tm_map = devm_regmap_init_mmio(tmdev->dev, tm_base, &tsens_config); > + if (IS_ERR(tmdev->tm_map)) > + return PTR_ERR(tmdev->tm_map); > > return 0; > } > diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c > index 44da02f594ac..1bdef92e4521 100644 > --- a/drivers/thermal/qcom/tsens-v2.c > +++ b/drivers/thermal/qcom/tsens-v2.c > @@ -21,7 +21,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp) > int ret; > > status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4; > - ret = regmap_read(tmdev->map, status_reg, &code); > + ret = regmap_read(tmdev->tm_map, status_reg, &code); > if (ret) > return ret; > last_temp = code & LAST_TEMP_MASK; > @@ -29,7 +29,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp) > goto done; > > /* Try a second time */ > - ret = regmap_read(tmdev->map, status_reg, &code); > + ret = regmap_read(tmdev->tm_map, status_reg, &code); > if (ret) > return ret; > if (code & STATUS_VALID_BIT) { > @@ -40,7 +40,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp) > } > > /* Try a third/last time */ > - ret = regmap_read(tmdev->map, status_reg, &code); > + ret = regmap_read(tmdev->tm_map, status_reg, &code); > if (ret) > return ret; > if (code & STATUS_VALID_BIT) { > diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h > index 8207610f326a..58e98c4d3a8b 100644 > --- a/drivers/thermal/qcom/tsens.h > +++ b/drivers/thermal/qcom/tsens.h > @@ -69,7 +69,7 @@ struct tsens_context { > struct tsens_device { > struct device *dev; > u32 num_sensors; > - struct regmap *map; > + struct regmap *tm_map; > u32 tm_offset; > struct tsens_context ctx; > const struct tsens_ops *ops; Reviewed-by: Matthias Kaehlcke <mka@chromium.org> -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c index 4af76de7dc2e..0f0adb302a7b 100644 --- a/drivers/thermal/qcom/tsens-8960.c +++ b/drivers/thermal/qcom/tsens-8960.c @@ -60,7 +60,7 @@ static int suspend_8960(struct tsens_device *tmdev) { int ret; unsigned int mask; - struct regmap *map = tmdev->map; + struct regmap *map = tmdev->tm_map; ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold); if (ret) @@ -85,7 +85,7 @@ static int suspend_8960(struct tsens_device *tmdev) static int resume_8960(struct tsens_device *tmdev) { int ret; - struct regmap *map = tmdev->map; + struct regmap *map = tmdev->tm_map; ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); if (ret) @@ -117,12 +117,12 @@ static int enable_8960(struct tsens_device *tmdev, int id) int ret; u32 reg, mask; - ret = regmap_read(tmdev->map, CNTL_ADDR, ®); + ret = regmap_read(tmdev->tm_map, CNTL_ADDR, ®); if (ret) return ret; mask = BIT(id + SENSOR0_SHIFT); - ret = regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST); + ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg | SW_RST); if (ret) return ret; @@ -131,7 +131,7 @@ static int enable_8960(struct tsens_device *tmdev, int id) else reg |= mask | SLP_CLK_ENA_8660 | EN; - ret = regmap_write(tmdev->map, CNTL_ADDR, reg); + ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg); if (ret) return ret; @@ -148,7 +148,7 @@ static void disable_8960(struct tsens_device *tmdev) mask <<= SENSOR0_SHIFT; mask |= EN; - ret = regmap_read(tmdev->map, CNTL_ADDR, ®_cntl); + ret = regmap_read(tmdev->tm_map, CNTL_ADDR, ®_cntl); if (ret) return; @@ -159,7 +159,7 @@ static void disable_8960(struct tsens_device *tmdev) else reg_cntl &= ~SLP_CLK_ENA_8660; - regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); + regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl); } static int init_8960(struct tsens_device *tmdev) @@ -167,8 +167,8 @@ static int init_8960(struct tsens_device *tmdev) int ret, i; u32 reg_cntl; - tmdev->map = dev_get_regmap(tmdev->dev, NULL); - if (!tmdev->map) + tmdev->tm_map = dev_get_regmap(tmdev->dev, NULL); + if (!tmdev->tm_map) return -ENODEV; /* @@ -184,14 +184,14 @@ static int init_8960(struct tsens_device *tmdev) } reg_cntl = SW_RST; - ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl); + ret = regmap_update_bits(tmdev->tm_map, CNTL_ADDR, SW_RST, reg_cntl); if (ret) return ret; if (tmdev->num_sensors > 1) { reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); reg_cntl &= ~SW_RST; - ret = regmap_update_bits(tmdev->map, CONFIG_ADDR, + ret = regmap_update_bits(tmdev->tm_map, CONFIG_ADDR, CONFIG_MASK, CONFIG); } else { reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16); @@ -200,12 +200,12 @@ static int init_8960(struct tsens_device *tmdev) } reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT; - ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); + ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl); if (ret) return ret; reg_cntl |= EN; - ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); + ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl); if (ret) return ret; @@ -252,12 +252,12 @@ static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp) timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); do { - ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy); + ret = regmap_read(tmdev->tm_map, INT_STATUS_ADDR, &trdy); if (ret) return ret; if (!(trdy & TRDY_MASK)) continue; - ret = regmap_read(tmdev->map, s->status, &code); + ret = regmap_read(tmdev->tm_map, s->status, &code); if (ret) return ret; *temp = code_to_mdegC(code, s); diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c index 303e3fdaca98..0585084630b3 100644 --- a/drivers/thermal/qcom/tsens-common.c +++ b/drivers/thermal/qcom/tsens-common.c @@ -99,8 +99,7 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp) int last_temp = 0, ret; status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * SN_ADDR_OFFSET; - ret = regmap_read(tmdev->map, status_reg, &code); - + ret = regmap_read(tmdev->tm_map, status_reg, &code); if (ret) return ret; last_temp = code & SN_ST_TEMP_MASK; @@ -118,7 +117,7 @@ static const struct regmap_config tsens_config = { int __init init_common(struct tsens_device *tmdev) { - void __iomem *base; + void __iomem *tm_base; struct resource *res; struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node); @@ -134,13 +133,13 @@ int __init init_common(struct tsens_device *tmdev) } res = platform_get_resource(op, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(&op->dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); + tm_base = devm_ioremap_resource(&op->dev, res); + if (IS_ERR(tm_base)) + return PTR_ERR(tm_base); - tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config); - if (IS_ERR(tmdev->map)) - return PTR_ERR(tmdev->map); + tmdev->tm_map = devm_regmap_init_mmio(tmdev->dev, tm_base, &tsens_config); + if (IS_ERR(tmdev->tm_map)) + return PTR_ERR(tmdev->tm_map); return 0; } diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c index 44da02f594ac..1bdef92e4521 100644 --- a/drivers/thermal/qcom/tsens-v2.c +++ b/drivers/thermal/qcom/tsens-v2.c @@ -21,7 +21,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp) int ret; status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4; - ret = regmap_read(tmdev->map, status_reg, &code); + ret = regmap_read(tmdev->tm_map, status_reg, &code); if (ret) return ret; last_temp = code & LAST_TEMP_MASK; @@ -29,7 +29,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp) goto done; /* Try a second time */ - ret = regmap_read(tmdev->map, status_reg, &code); + ret = regmap_read(tmdev->tm_map, status_reg, &code); if (ret) return ret; if (code & STATUS_VALID_BIT) { @@ -40,7 +40,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp) } /* Try a third/last time */ - ret = regmap_read(tmdev->map, status_reg, &code); + ret = regmap_read(tmdev->tm_map, status_reg, &code); if (ret) return ret; if (code & STATUS_VALID_BIT) { diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index 8207610f326a..58e98c4d3a8b 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -69,7 +69,7 @@ struct tsens_context { struct tsens_device { struct device *dev; u32 num_sensors; - struct regmap *map; + struct regmap *tm_map; u32 tm_offset; struct tsens_context ctx; const struct tsens_ops *ops;
The TSENS driver currently only uses a limited set of registers from the TM address space. So it was ok to map just that set of registers and call it "map". We'd now like to map a second set: SROT registers to introduce new functionality. Rename the "map" field to a more appropriate "tm_map". The 8960 doesn't have a clear split between TM and SROT registers. To avoid complicating the data structure, it will switchover to using tm_map for its maps. There is no functional change with this patch. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> --- drivers/thermal/qcom/tsens-8960.c | 30 ++++++++++++++--------------- drivers/thermal/qcom/tsens-common.c | 17 ++++++++-------- drivers/thermal/qcom/tsens-v2.c | 6 +++--- drivers/thermal/qcom/tsens.h | 2 +- 4 files changed, 27 insertions(+), 28 deletions(-)