| Message ID | 9da672a2-0269-4860-8912-189414b43d4c@cogentembedded.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 8d9923b3a2f6c0e4ad3f9d9cad6e9010cf0d67e6 |
| Headers | show |
| Series | Add R8A77980/Condor eMMC support | expand |
On Tue, Aug 21, 2018 at 10:50:31PM +0300, Sergei Shtylyov wrote: > Add the eMMC chip support for the V3M Started Kit board. > > Based on the original (and large) patches by Vladimir Barinov. > > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Thanks, This looks fine to me but I will wait to see if there are other reviews before applying. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> I am, however, curious to know about HS200. Is it supported on the v3msk? If so, do you have any plans to enable it?
On 08/22/2018 02:31 PM, Simon Horman wrote: >> Add the eMMC chip support for the V3M Started Kit board. >> >> Based on the original (and large) patches by Vladimir Barinov. >> >> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> >> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> > > Thanks, > > This looks fine to me but I will wait to see if there are other reviews > before applying. > > Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > > I am, however, curious to know about HS200. > Is it supported on the v3msk? If so, do you have any plans to enable it? As I've already said, the eMMC chip only receives 3.3V on all its voltage inputs. MBR, Sergei
On Wed, Aug 22, 2018 at 05:43:11PM +0300, Sergei Shtylyov wrote: > On 08/22/2018 02:31 PM, Simon Horman wrote: > > >> Add the eMMC chip support for the V3M Started Kit board. > >> > >> Based on the original (and large) patches by Vladimir Barinov. > >> > >> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> > >> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> > > > > Thanks, > > > > This looks fine to me but I will wait to see if there are other reviews > > before applying. > > > > Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > > > > I am, however, curious to know about HS200. > > Is it supported on the v3msk? If so, do you have any plans to enable it? > > As I've already said, the eMMC chip only receives 3.3V on all its voltage inputs. Thanks Sergei, got it. I have applied this for v4.20.
Index: renesas/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts =================================================================== --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ renesas/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -51,6 +51,15 @@ regulator-always-on; }; + vcc_vddq_vin0: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "VCC_VDDQ_VIN0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + lvds-decoder { compatible = "thine,thc63lvd1024"; vcc-supply = <&vcc_d3_3v>; @@ -128,6 +137,12 @@ function = "i2c0"; }; + mmc_pins: mmc_3_3v { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <3300>; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -192,6 +207,17 @@ }; }; +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_d3_3v>; + vqmmc-supply = <&vcc_vddq_vin0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default";